Download or read book Ion Implantation as a New Surface Treatment Technology written by National Research Council (U.S.). Committee on Ion Implantation and Competing New Surface Treatment Technologies and published by National Academies. This book was released on 1979 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Surface Coatings Technology written by B. D. Sartwell and published by Elsevier. This book was released on 2016-06-03 with total page 665 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface & Coatings Technology, Volumes 59–60 presents the proceedings of the Third International Conference on Plasma Surface Engineering, held in Garmisch-Partenkirchen, Germany, on October 26–29, 1992. This book discusses the widespread applications of plasma and particle beam assisted methods in surface and thin film technology. Volume 59 is organized into 11 parts encompassing 69 chapters while Volume 60 is comprised of eight parts encompassing 49 chapters. This compilation of papers begins with an overview of the kinetic modelling of low pressure high frequency discharges. This text then examines the effect of various deposition parameters on the growth of chamber wall deposits. Other chapters consider the physiochemical behavior of ceramic materials for space applications. This book discusses as well the economic aspects of the application of plasma surface technologies. The reader is also introduced to the environmental aspects of physical vapor deposition coating technology. This book is a valuable resource for plasma surface engineers, technologists, and researchers.

Download or read book Ion Implantation Science and Technology written by J.F. Ziegler and published by Elsevier. This book was released on 2012-12-02 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ion Implantation: Science and Technology serves as both an introduction to and tutorial on the science, techniques, and machines involved in ion implantation. The book is divided into two parts. Part 1 discusses topics such as the history of the ion implantation; the different types and purposes of ion implanters; the penetration of energetic ions into solids; damage annealing in silicon; and ion implantation metallurgy. Part 2 covers areas such as ion implementation system concepts; ion sources; underlying principles related to ion optics; and safety and radiation considerations in ion implantation. The text is recommended for engineers who would like to be acquainted with the principles and processes behind ion implantation or make studies on the field.

Download or read book Ion Implantation in Semiconductors written by Susumu Namba and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt: The technique of ion implantation has become a very useful and stable technique in the field of semiconductor device fabrication. This use of ion implantation is being adopted by industry. Another important application is the fundamental study of the physical properties of materials. The First Conference on Ion Implantation in Semiconductors was held at Thousand Oaks, California in 1970. The second conference in this series was held at Garmish-Partenkirchen, Germany, in 1971. At the third conference, which convened at Yorktown Heights, New York in 1973, the emphasis was broadened to include metals and insulators as well as semiconductors. This scope of the conference was still accepted at the fourth conference which was held at Osaka, Japan, in 1974. A huge number of papers had been submitted to this conference. All papers which were presented at the Fourth International Conference on Ion Implantation in Semiconductors and Other Materials are included in this proceedings. The success of this conference was due to technical presentations and discussions of 224 participants from 14 countries as well as to financial support from many companies in Japan. On behalf of the committee, I wish to thank the authors for their excellent papers and the sponsors for their financial support. The International Committee responsible for advising this conference consisted of B.L. Crowder, J.A. Davies, G. Dearna1ey, F.H. Eisen, Ph. G1otin, T. Itoh, A.U. MacRae, J.W. Mayer, S. Namba, I. Ruge, and F.L. Vook.

Download or read book Surface Treatments for Improved Performance and Properties written by John J. Burke and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Army Materials and Mechanics Research Center in coop eration with the Materials Science Group of the Department of Chemical Engineering and Materials Science of Syracuse University has been conducting the Annual Sagamore Army Materials Research Conference since 1954. The specific purpose of these conferences has been to bring together over 150 scientists and engineers from academic institutions, industry and government who are uniquely qualified to explore in depth a subject of importance to the Department of Defense, the Army and the scientific community. These proceedings, entitled SURFACE TREATMENTS FOR IM PROVED PERFORMANCE AND PROPERTIES, address the Physical and Chemical Characteristics of Surfaces, Emerging Surface Modi fication Techniques, Surface Structure and Mechanical Proper ties, and Relationships between Properties and Processing for Non-metric Materials. We wish to acknowledge the dedicated assistance of JoseDh M. Bernier of the Army Materials and Mechanics Research Center and Helen Brown DeMascio of Syracuse University throughout the stages of the conference planning and finally the publication of this book. The continued active interest and support of these con ferences by Dr. E. Wright, Director of the Army Materials and Mechanics Research Center, is appreciated. Syracuse University Syracuse, New York The Editors vii CONTENTS SESSION I 1. Surface Modification for Improved Properties. . . . . . .. 3 P. A. Parrish SESSION II PHYSICAL AND CHEMICAL CHARACTERISTICS OF SURFACES P. Ficalora, Moderator 2. Characterization of Surfaces. 19 H. K. Herglotz 3. Reaction Kinetics 51 J. B. Hudson 4. Surfac e Treatments for Enhanced Bonding Between Inorganic Surfaces and Polymers ........ .

Download or read book New Energy Vehicle Powertrain Technologies and Applications written by Yong Chen and published by Springer Nature. This book was released on 2023-06-15 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on transmission systems for pure electric and hybrid vehicles. It first discusses system development and optimization technologies, comprehensively and systematically describing the development trends, structures and technical characteristics, as well as the related technologies and methods. It highlights the principles, implementation process and energy management of the power transmission system based on the pure electric and hybrid mode management method, and examines the reliability and NVH characteristic tests and optimization technologies. Combining research theory and engineering practice, the book is a valuable reference resource for engineering and technical professionals in the field of automobile and related power transmission machinery as well as undergraduate and graduate students.

Download or read book Surface Engineering of Metals written by Tadeusz Burakowski and published by CRC Press. This book was released on 1998-12-23 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface Engineering of Metals provides basic definitions of classical and modern surface treatments, addressing mechanisms of formation, microstructure, and properties of surface layers. Part I outlines the fundamentals of surface engineering, presents the history of its development, and proposes a two-category classification of surface layers. Discussions include the basic potential and usable properties of superficial layers and coatings, explaining their concept, interaction with other properties, and the significance of these properties for proper selection and functioning. Part II provides an original classification of the production methods of surface layers. Discussions include the latest technologies in this field, characterized by directional or beam interaction of particles or of the heating medium with the treat surface.

Download or read book International Workshop On Surface Enginnering And Coatings written by Indira Rajagopal and published by Allied Publishers. This book was released on 1999 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Industrial Plasma Engineering written by J Reece Roth and published by Routledge. This book was released on 2017-11-01 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by a leading expert in the field, the paperback edition of Industrial Plasma Engineering, Volume 2: Applications to Nonthermal Plasma Processing provides a background in the principles and applications of low temperature, partially ionized Lorentzian plasmas that are used industrially. The book also presents a description of plasma-related processes and devices that are of commercial interest. The text is suitable for students or in-service users with a physics and calculus background at the sophomore level. These two volumes are intended to be used as textbooks at the senior or first-year graduate level by students from all engineering and physical science disciplines and as a reference source by in-service engineers.

Download or read book Principles and Applications of Tribology written by Bharat Bhushan and published by John Wiley & Sons. This book was released on 1999-03-25 with total page 1044 pages. Available in PDF, EPUB and Kindle. Book excerpt: A current and comprehensive treatment of tribology theory andapplications A solid understanding of tribology is essential for engineers inmany fields working to design and ensure the reliability of machineparts and systems. Principles and Applications of Tribology is thefirst truly broad-based book on this vital subject. Moving frombasic theory to practice, it examines tribology from the integratedviewpoint of mechanical engineering, mechanics, and materialsscience. It offers detailed coverage of the mechanisms of materialwear, friction, and all of the major lubrication techniques--liquids, solids, and gases-- and examines a wide range of bothtraditional and state-of-the-art applications. Based on the author's extensive research and teaching experience inthe areas of tribology, mechanics, and materials science for morethan thirty years, this book emphasizes a contemporary knowledge oftribology that includes the emerging field of micro/nanotribologyand various industrial applications, including cutting-edge topicssuch as magnetic information storage devices andmicroelectromechanical systems. Principles and Applications of Tribology is invaluable formechanical, chemical, and materials engineers involved in productand process design, as well as graduate students and researchers inthese areas.

Download or read book Engineering Thin Films and Nanostructures with Ion Beams written by Emile Knystautas and published by CRC Press. This book was released on 2018-10-03 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: While ion-beam techniques have been used to create thin films in the semiconductor industry for several decades, these methods have been too costly for other surface treatment applications. However, as manufacturing devices become increasingly smaller, the use of a directed-energy ion beam is finding novel industrial applications that require the custom tailoring of new materials and devices, including magnetic storage devices, photonics, opto-electronics, and molecular transport. Engineering Thin Films and Nanostructures with Ion Beams offers a thorough narrative of the recent advances that make this technology relevant to current and future applications. Featuring internationally recognized researchers, the book compiles their expertise in a multidimensional source that: Highlights the mechanisms and visual evidence of the effects of single-ion impacts on metallic surfaces Considers how ion-beam techniques can help achieve higher disk-drive densities Introduces gas-cluster ion-beam technology and reviews its precedents Explains how ion beams are used to aggregate metals and semiconductors into nanoclusters with nonlinear optical properties Addresses current challenges in building equipment needed to produce nanostructures in an industrial setting Examines the combination of ion-beam techniques, particularly with physical vapor deposition Delineates the fabrication of nanopillars, nanoflowers, and interconnected nanochannels in three dimensions by using atomic shadowing techniques Illustrates the production of nanopores of varying dimensions in polymer films, alloys, and superconductors using ion-beam irradiation Shows how fingerprints can be made more reliable as forensic evidence by recoil-mixing them into the substrate using ion beams From the basics of the ion-beam modification of materials to state-of-the-art applications, Engineering Th

Download or read book Surface Engineering and Technology for Biomedical Implants written by Yoshiki Oshida and published by Momentum Press. This book was released on 2014-04-15 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new book synthesizes a wide range of interdisciplinary literature to provide the state-of-the art of biomedical implants. It discusses materials and explains the three basic requirements for implant success from a surface engineering perspective: biological compatibility, biomechanical compatibility, morphological compatibility. Biomedical, mechanical, and materials engineers will find this book indispensable for understanding proper treatment of implant surfaces in order to achieve clinical success. Highlights include: • Coverage of surface engineering of polymer, metallic, ceramic and composite implant materials; • Coverage of chemical, mechanical, physical, thermal, and combined surface modification technologies; • Explanations of interfacial reaction between vital tissue and non-vital implant surface; and • Methodologies and technologies for modification of surface layer/zone to promote the osteo-integration, the ultimate success for biomedical implants in both dental and medical practice.

Download or read book Micromanufacturing Engineering and Technology written by Yi Qin and published by William Andrew. This book was released on 2010-07-02 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micromanufacturing Engineering and Technology presents applicable knowledge of technology, equipment and applications, and the core economic issues of micromanufacturing for anyone with a basic understanding of manufacturing, material, or product engineering. It explains micro-engineering issues (design, systems, materials, market and industrial development), technologies, facilities, organization, competitiveness, and innovation with an analysis of future potential. The machining, forming, and joining of miniature / micro-products are all covered in depth, covering: grinding/milling, laser applications, and photo chemical etching; embossing (hot & UV), injection molding and forming (bulk, sheet, hydro, laser); mechanical assembly, laser joining, soldering, and packaging. - Presents case studies, material and design considerations, working principles, process configurations, and information on tools, equipment, parameters and control - Explains the many facets of recently emerging additive / hybrid technologies and systems, incl: photo-electric-forming, liga, surface treatment, and thin film fabrication - Outlines system engineering issues pertaining to handling, metrology, testing, integration and software - Explains widely used micro parts in bio / medical industry, information technology and automotive engineering - Covers technologies in high demand, such as: micro-mechanical-cutting, lasermachining, micro-forming, micro-EDM, micro-joining, photo-chemical-etching, photo-electro-forming, and micro-packaging

Download or read book Surface Coating and Modification of Metallic Biomaterials written by Cuie Wen and published by Woodhead Publishing. This book was released on 2015-03-31 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite advances in alternative materials, metals are still the biomaterial of choice for a number of clinical applications such as dental, orthopedic and cardiac implants. However, there are a number of intrinsic problems associated with implanting metal in the biological environment, such as wear, corrosion, biocompatibility and toxicity, which must be addressed. Modern technology has enabled scientists to modify metal surfaces or apply special coatings to metals to improve their performance safety. Surface Coating and Modification of Metallic Biomaterials will discuss the most important modification techniques and coatings for metals, first covering the fundamentals of metals as a biomaterial and then exploring surface modification techniques and coatings. - An expansive overview of surface modification techniques for biomedical use - In-depth exploration of issues arising from metal biomaterial use - Includes examples of applications in a clinical setting

Download or read book Magnesium Technology 2016 written by Alok Singh and published by Springer. This book was released on 2016-12-12 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Magnesium Technology Symposium, the event on which this collection is based, is one of the largest yearly gatherings of magnesium specialists in the world. Papers represent all aspects of the field, ranging from primary production to applications to recycling. Moreover, papers explore everything from basic research findings to industrialization. Magnesium Technology 2016 covers a broad spectrum of current topics, including alloys and their properties; cast products and processing; wrought products and processing; forming, joining, and machining; corrosion and surface finishing; ecology; and structural applications. In addition, there is coverage of new and emerging applications.

Download or read book Corrosion Prevention of Magnesium Alloys written by Guang-Ling Song and published by Elsevier. This book was released on 2013-02-22 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnesium (Mg) alloys are receiving increasing attention due to their abundance, light weight, castability, formability, mechanical properties and corrosion performance. By selecting the appropriate combination of materials, coatings and surface modifications, their corrosion resistance can be greatly enhanced. Corrosion prevention of magnesium alloys is a comprehensive guide to the effective prevention of corrosion in these important light metals.Part one discusses alloying, inhibition and prevention strategies for magnesium alloys as well as corrosion and prevention principles. Part two reviews surface treatment and conversion. Beginning with an overview of surface cleaning and pre-conditioning, the book goes on to discuss the use of surface processing and alloying, laser treatments, chemical conversion and electrochemical anodization to improve the corrosion resistance of magnesium alloys. Coatings are then the focus of part three, including varied plating techniques, cold spray coatings, gel and electroless electrophoresis coatings. Finally, the book concludes in part four with a selection of case studies investigating the application of preventative techniques for both automotive and medical applications.With its distinguished editor and international team of expert contributors, Corrosion prevention of magnesium alloys is a key reference tool for all those working with magnesium and its alloys, including scientists, engineers, metallurgists, aerospace and automotive professionals, and academics interested in this field. - Chapters provide an overview of surface cleaning and pre-conditioning - Examines processes to improve the corrosion resistance of magnesium alloys, including laser treatments and chemical conversion and electrochemical anodization - Discusses cold spray, sol-gel and electrophoretic coatings