Download or read book Ion Beam Induced Defects and Their Effects in Oxide Materials written by Parmod Kumar and published by Springer Nature. This book was released on 2022-02-23 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of the applications of ion beam techniques in oxide materials. Oxide materials exhibit defect-induced physical properties relevant to applications in sensing, optoelectronics and spintronics. Defects in these oxide materials also lead to magnetism in non-magnetic materials or to a change of magnetic ordering in magnetic materials. Thus, an understanding of defects is of immense importance. To date, ion beam tools are considered the most effective techniques for producing controlled defects in these oxides. This book will detail the ion beam tools utilized for creating defects in oxides.
Download or read book Ternary Quantum Dots written by Oluwatobi Samuel Oluwafemi and published by Woodhead Publishing. This book was released on 2021-07-02 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ternary Quantum Dots: Synthesis, Properties, and Applications reviews the latest advances in ternary (I-III-VI) chalcopyrite quantum dots (QDs), along with their synthesis, properties and applications. Sections address the fundamental key concepts of ternary quantum dots, progress in synthesis strategies (i.e., organic and aqueous synthesis), and characterization methods (i.e., transmission electron microscopy, dynamic light scattering, etc.). Properties of ternary quantum dots are comprehensively reviewed, including optical, chemical and physical properties. The factors and mechanisms of the cytotoxicity of ternary quantum dot-based nanomaterials are also described. Since ternary chalcopyrite quantum dots are less toxic and more environmentally benign than conventional binary II-VI chalcogenide quantum dots, they are being investigated to replace conventional quantum dots in a range of applications. Thus, this book reviews QDs in various applications, such as solar cells, photocatalytic, sensors and bio-applications. - Reviews fundamental concepts of ternary quantum dots and quantum dot-nanocomposites including the most relevant synthesis strategies, key properties, and characterization techniques - Delves into the cytotoxicity of quantum dots looking at the factors and mechanisms that influence cytotoxicity including demonstration of cytotoxicity assays for in vitro and in vivo tests - Touches on the many applications of ternary quantum dots including biomedical applications, applications in solar cells, sensing applications, and photocatalytic applications
Download or read book Colloidal Quantum Dot Optoelectronics and Photovoltaics written by Gerasimos Konstantatos and published by Cambridge University Press. This book was released on 2013-11-07 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Captures the most up-to-date research in the field, written in an accessible style by the world's leading experts.
Download or read book Ion Beam Synthesis and Processing of Advanced Materials Volume 647 written by Steven C. Moss and published by . This book was released on 2001-08-02 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: The presentations during this November 2000 symposium emphasize the broad scientific and technological interest in ion-beam applications to synthesis and processing of advanced materials. A significant portion of the symposium addressed ion-beam processing and synthesis at the nano-scale, including work on nanocrystals, quantum dots, quantum wells, nanotubes, and self-organized structures, as well as heterostructures and other thin films. c. Book News Inc.
Download or read book Cluster Beam Deposition of Functional Nanomaterials and Devices written by Paolo Milani and published by Elsevier. This book was released on 2020-03-11 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cluster Beam Deposition of Functional Nanomaterials and Devices, Volume 15, provides up-to-date information on the CBD of novel nanomaterials and devices. The book offers an overview of gas phase synthesis in a range of nanoparticles, along with discussions on the development of several devices and applications. Applications include, but are not limited to catalysis, smart nanocomposites, nanoprobes, electronic devices, gas sensors and biosensors. This is an important reference source for materials scientists and engineers who want to learn more about this sustainable, innovative manufacturing technology. - Explores the use of CBD for the fabrication of functionalized nanomaterials and devices - Shows how CBD is used for both sensing and biomedical applications - Discusses how this emerging technology is being commercialized for use on a large-scale
Download or read book Materials Synthesis and Processing Using Ion Beams Volume 316 written by Robert J. Culbertson and published by . This book was released on 1994-03-15 with total page 1126 pages. Available in PDF, EPUB and Kindle. Book excerpt: The MRS Symposium Proceeding series is an internationally recognised reference suitable for researchers and practitioners.
Download or read book Silicon Nanocrystals written by Lorenzo Pavesi and published by John Wiley & Sons. This book was released on 2010-02-02 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique collection of knowledge represents a comprehensive treatment of the fundamental and practical consequences of size reduction in silicon crystals. This clearly structured reference introduces readers to the optical, electrical and thermal properties of silicon nanocrystals that arise from their greatly reduced dimensions. It covers their synthesis and characterization from both chemical and physical viewpoints, including ion implantation, colloidal synthesis and vapor deposition methods. A major part of the text is devoted to applications in microelectronics as well as photonics and nanobiotechnology, making this of great interest to the high-tech industry.
Download or read book Semiconductor Nanocrystals and Metal Nanoparticles written by Tupei Chen and published by CRC Press. This book was released on 2016-10-14 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductor nanocrystals and metal nanoparticles are the building blocks of the next generation of electronic, optoelectronic, and photonic devices. Covering this rapidly developing and interdisciplinary field, the book examines in detail the physical properties and device applications of semiconductor nanocrystals and metal nanoparticles. It begins with a review of the synthesis and characterization of various semiconductor nanocrystals and metal nanoparticles and goes on to discuss in detail their optical, light emission, and electrical properties. It then illustrates some exciting applications of nanoelectronic devices (memristors and single-electron devices) and optoelectronic devices (UV detectors, quantum dot lasers, and solar cells), as well as other applications (gas sensors and metallic nanopastes for power electronics packaging). Focuses on a new class of materials that exhibit fascinating physical properties and have many exciting device applications. Presents an overview of synthesis strategies and characterization techniques for various semiconductor nanocrystal and metal nanoparticles. Examines in detail the optical/optoelectronic properties, light emission properties, and electrical properties of semiconductor nanocrystals and metal nanoparticles. Reviews applications in nanoelectronic devices, optoelectronic devices, and photonic devices.
Download or read book Structural and Optical Characterization of Ion Beam Synthesized Ge Nanocrystals written by Ian David Sharp and published by . This book was released on 2006 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials for Solid State Lighting and Displays written by Adrian Kitai and published by John Wiley & Sons. This book was released on 2017-03-06 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: LEDs are in the midst of revolutionizing the lighting industry Up-to-date and comprehensive coverage of light-emitting materials and devices used in solid state lighting and displays Presents the fundamental principles underlying luminescence Includes inorganic and organic materials and devices LEDs offer high efficiency, long life and mercury free lighting solutions
Download or read book Ion Beam Modification of Materials written by J.S. Williams and published by Newnes. This book was released on 2012-12-02 with total page 1157 pages. Available in PDF, EPUB and Kindle. Book excerpt: This conference consisted of 15 oral sessions, including three plenary papers covering areas of general interest, 22 specialist invited papers and 51 contributed presentations as well as three poster sessions. There were several scientific highlights covering a diverse spectrum of materials and ion beam processing methods. These included a wide range of conventional and novel applications such as: optical displays and opto-electronics, motor vehicle and tooling parts, coatings tailored for desired properties, studies of fundamental defect properties, the production of novel (often buried) compounds, and treating biomedical materials. The study of nanocrystals produced by ion implantation in a range of host matrices, particularly for opto-electronics applications, was one especially new and exciting development. Despite several decades of study, major progress was reported at the conference in understanding defect evolution in semiconductors and the role of defects in transient impurity diffusion. The use of implantation to tune or isolate optical devices and in forming optically active centres and waveguides in semiconductors, polymers and oxide ceramics was a major focus of several presentations at the conference. The formation of hard coatings by ion assisted deposition or direct implantation was also an area which showed much recent progress. Ion beam techniques had also developed apace, particularly those based on plasma immersion ion implantation or alternative techniques for large area surface treatment. Finally, the use of ion beams for the direct treatment of cancerous tissue was a particularly novel and interesting application of ion beams.
Download or read book Nanofabrication Using Focused Ion and Electron Beams written by Ivo Utke and published by Oxford University Press. This book was released on 2012-05-01 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanofabrication Using Focused Ion and Electron Beams presents fundamentals of the interaction of focused ion and electron beams (FIB/FEB) with surfaces, as well as numerous applications of these techniques for nanofabrication involving different materials and devices. The book begins by describing the historical evolution of FIB and FEB systems, applied first for micro- and more recently for nanofabrication and prototyping, practical solutions available in the market for different applications, and current trends in development of tools and their integration in a fast growing field of nanofabrication and nanocharacterization. Limitations of the FIB/FEB techniques, especially important when nanoscale resolution is considered, as well as possible ways to overcome the experimental difficulties in creating new nanodevices and improving resolution of processing, are outlined. Chapters include tutorials describing fundamental aspects of the interaction of beams (FIB/FEB) with surfaces, nanostructures and adsorbed molecules; electron and ion beam chemistries; basic theory, design and configuration of equipment; simulations of processes; basic solutions for nanoprototyping. Emerging technologies as processing by cluster beams are also discussed. In addition, the book considers numerous applications of these techniques (milling, etching, deposition) for nanolithography, nanofabrication and characterization, involving different nanostructured materials and devices. Its main focus is on practical details of using focused ion and electron beams with gas assistance (deposition and etching) and without gas assistance (milling/cutting) for fabrication of devices from the fields of nanoelectronics, nanophotonics, nanomagnetics, functionalized scanning probe tips, nanosensors and other types of NEMS (nanoelectromechanical systems). Special attention is given to strategies designed to overcome limitations of the techniques (e.g., due to damaging produced by energetic ions interacting with matter), particularly those involving multi-step processes and multi-layer materials. Through its thorough demonstration of fundamental concepts and its presentation of a wide range of technologies developed for specific applications, this volume is ideal for researches from many different disciplines, as well as engineers and professors in nanotechnology and nanoscience.
Download or read book Quantum Dots written by Ameenah Al-Ahmadi and published by BoD – Books on Demand. This book was released on 2012-04-04 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book “Quantum dots: A variety of a new applications” provides some collections of practical applications of quantum dots. This book is divided into four sections. In section 1 a review of the thermo-optical characterization of CdSe/ZnS core-shell nanocrystal solutions was performed. The Thermal Lens (TL) technique was used, and the thermal self-phase Modulation (TSPM) technique was adopted as the simplest alternative method. Section 2 includes five chapters where novel optical and lasing application are discussed. In section 3 four examples of quantum dot system for different applications in electronics are given. Section 4 provides three examples of using quantum dot system for biological applications. This is a collaborative book sharing and providing fundamental research such as the one conducted in Physics, Chemistry, Biology, Material Science, Medicine with a base text that could serve as a reference in research by presenting up-to-date research work on the field of quantum dot systems.
Download or read book Atomistic Mechanisms in Beam Synthesis and Irradiation of Materials Volume 504 written by and published by Mrs Proceedings. This book was released on 1999-03 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Some 70 papers focus on atomistic processes that occur in metals, ceramics and glasses, and polymers exposed to energetic beams in order to synthesize or modify a material. Sections also explore defects and modelling, energetic particle synthesis and mechanical properties, and optical materials and nanoclusters. The invited papers cover defect evolution in ion-implanted Silicon from point to extended defects, achievements of the Japanese government and university projects in ion and laser beam technology, forming metastable materials by ion-beam-assisted deposition and its application to metal clusters in ceramic matrices, and the mesoscale engineering of nanocomposite nonlinear optical materials. Annotation copyrighted by Book News, Inc., Portland, OR
Download or read book Silicon based Nanomaterials written by Handong Li and published by Springer Science & Business Media. This book was released on 2013-10-02 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: A variety of nanomaterials have excellent optoelectronic and electronic properties for novel device applications. At the same time, and with advances in silicon integrated circuit (IC) techniques, compatible Si-based nanomaterials hold promise of applying the advantages of nanomaterials to the conventional IC industry. This book focuses not only on silicon nanomaterials, but also summarizes up-to-date developments in the integration of non-silicon nanomaterials on silicon. The book showcases the work of leading researchers from around the world who address such key questions as: Which silicon nanomaterials can give the desired optical, electrical, and structural properties, and how are they prepared? What nanomaterials can be integrated on to a silicon substrate and how is this accomplished? What Si-based nanomaterials may bring a breakthrough in this field? These questions address the practical issues associated with the development of nanomaterial-based devices in applications areas such as solar cells, luminous devices for optical communication (detectors, lasers), and high mobility transistors. Investigation of silicon-based nanostructures is of great importance to make full use of nanomaterials for device applications. Readers will receive a comprehensive view of Si-based nanomaterials, which will hopefully stimulate interest in developing novel nanostructures or techniques to satisfy the requirements of high performance device applications. The goal is to make nanomaterials the main constituents of the high performance devices of the future.
Download or read book Nanostructured Thin Films and Coatings written by Sam Zhang and published by CRC Press. This book was released on 2010-06-18 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: Authored by leading experts from around the world, the three-volume Handbook of Nanostructured Thin Films and Coatings gives scientific researchers and product engineers a resource as dynamic and flexible as the field itself. The first two volumes cover the latest research and application of the mechanical and functional properties of thin films an
Download or read book Polymer Based Multifunctional Nanocomposites and Their Applications written by John Zhanhu Guo and published by Elsevier. This book was released on 2018-09-14 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer-Based Multifunctional Nanocomposites and Their Applications provides an up-to-date review of the latest advances and developments in the field of polymer nanocomposites. It will serve as a one-stop reference resource on important research accomplishments in the area of multifunctional nanocomposites, with a particular emphasis placed on the use of nanofillers and different functionality combinations. Edited and written by an expert team of researchers in the field, the book provides a practical analysis of functional polymers, nanoscience, and nanotechnology in important and developing areas, such as transportation engineering, mechanical systems, aerospace manufacturing, construction materials, and more. The book covers both theory and experimental results regarding the relationships between the effective properties of polymer composites and those of polymer matrices and reinforcements. - Presents a thorough and up-to-date review of the latest advances and developments in the field of multifunctional polymer nanocomposites - Integrates coverage of fundamentals, research and development, and the range of applications for multifunctional polymers and their composites, such as in the automotive, aerospace, biomedical and electrical industries - Supports further technological developments by discussing both theory and real world experimental data from academia and industry
