Download or read book Engineered Interfaces in Fiber Reinforced Composites written by Jang-Kyo Kim and published by Elsevier. This book was released on 1998-10-21 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study and application of composite materials are a truly interdisciplinary endeavour that has been enriched by contributions from chemistry, physics, materials science, mechanics and manufacturing engineering. The understanding of the interface (or interphase) in composites is the central point of this interdisciplinary effort. From the early development of composite materials of various nature, the optimization of the interface has been of major importance. While there are many reference books available on composite materials, few of them deal specifically with the science and mechanics of the interface of fiber reinforced composites. Further, many recent advances devoted solely to research in composite interfaces have been scattered in a variety of published literature and have yet to be assembled in a readily accessible form. To this end this book is an attempt to bring together recent developments in the field, both from the materials science and mechanics perspective, in a single convenient volume.The central theme of the book is tailoring the interface properties to optimise the mechanical peformance and structural integrity of composites with enhanced strength/stiffness and fracture toughness (or specific fracture resistance). It deals mainly with interfaces in advanced composites made from high performance fibers, such as glass, carbon, aramid, ultra high modulus polyethylene and some inorganic (e.g. B/W, A12O3, SiC) fibers, and matrix materials encompassing polymers, metals/alloys and ceramics. The book is intended to provide a comprehensive treatment of composite interfaces in such a way that it should be of interest to materials scientists, technologists and practising engineers, as well as graduate students and their supervisors in advanced composites. We hope that this book will also serve as a valuable source of reference to all those involved in the design and research of composite interfaces.The book contains eight chapters of discussions on microstructure-property relationships with underlying fundamental mechanics principles. In Chapter 1, an introduction is given to the nature and definition of interfaces in fiber reinforced composites. Chapter 2 is devoted to the mechanisms of adhesion which are specific to each fiber-matrix system, and the physio-chemical characterization of the interface with regard to the origin of adhesion. The experimental techniques that have been developed to assess the fiber-matrix interface bond quality on a microscopic scale are presented in Chapter 3, along with the techniques of measuring interlaminar/intralaminar strengths and fracture toughness using bulk composite laminates. The applicability and limitations associated with loading geometry and interpretation of test data are compared. Chapter 4 presents comprehensive theoretical analyses based on shear-lag models of the single fiber composite tests, with particular interest being placed on the interface debond process and the nature of the fiber-matrix interfacial bonding. Chapter 5 is devoted to reviewing current techniques of fiber surface treatments which have been devised to improve the bond strength and the fiber-matrix compatibility/stability during the manufacturing processes of composites. The micro-failure mechanisms and their associated theories of fracture toughness of composites are discussed in Chapter 6. The roles of the interface and its effects on the mechanical performance of fiber composites are addressed from several viewpoints. Recent research efforts to augment the transverse and interlaminar fracture toughness by means of controlled interfaces are presented in Chapters 7 and 8.
Download or read book Interfaces in Composites written by and published by ASTM International. This book was released on 1969 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Matrix Composites and Technology written by Ru-Min Wang and published by Elsevier. This book was released on 2011-07-14 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given such properties as low density and high strength, polymer matrix composites have become a widely used material in the aerospace and other industries. Polymer matrix composites and technology provides a helpful overview of these materials, their processing and performance.After an introductory chapter, part one reviews the main reinforcement and matrix materials used as well as the nature of the interface between them. Part two discusses forming and molding technologies for polymer matrix composites. The final part of the book covers key aspects of performance, including tensile, compression, shear and bending properties as well as impact, fatigue and creep behaviour.Polymer matrix composites and technology provides both students and those in industry with a valuable introduction to and overview of this important class of materials. - Provides a helpful overview of these materials, their processing and performance incorporating naming and classification of composite materials - Reviews the main reinforcement and matrix materials used as well as the nature of the interface between them including damage mechanisms - Discusses forming and molding technologies for polymer matrix composites outlining various techniques and technologies
Download or read book Advanced Materials by Design written by and published by . This book was released on 1988 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Performance Structural Fibers for Advanced Polymer Matrix Composites written by National Research Council and published by National Academies Press. This book was released on 2005-05-09 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt: Military use of advanced polymer matrix composites (PMC)â€"consisting of a resin matrix reinforced by high-performance carbon or organic fibersâ€"while extensive, accounts for less that 10 percent of the domestic market. Nevertheless, advanced composites are expected to play an even greater role in future military systems, and DOD will continue to require access to reliable sources of affordable, high-performance fibers including commercial materials and manufacturing processes. As a result of these forecasts, DOD requested the NRC to assess the challenges and opportunities associated with advanced PMCs with emphasis on high-performance fibers. This report provides an assessment of fiber technology and industries, a discussion of R&D opportunities for DOD, and recommendations about accelerating technology transition, reducing costs, and improving understanding of design methodology and promising technologies.
Download or read book SME Technical Paper written by Society of Manufacturing Engineers and published by . This book was released on 2003 with total page 770 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Carbon Nanotube polymer Composites written by Dimitrios Tasis and published by Royal Society of Chemistry. This book was released on 2013 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to summarize the basic chemical aspects for obtaining multifunctional carbon nanotube-based polymer composites, but also to highlight some of the most remarkable advances that occurred in the field during the last recent years.
Download or read book Ceramic Fibers and Coatings written by Committee on Advanced Fibers for High-Temperature Ceramic Composites and published by National Academies Press. This book was released on 1998-05-05 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-temperature ceramic fibers are the key components of ceramic matrix composites (CMCs). Ceramic fiber properties (strength, temperature and creep resistance, for example)-along with the debonding characteristics of their coatings-determine the properties of CMCs. This report outlines the state of the art in high-temperature ceramic fibers and coatings, assesses fibers and coatings in terms of future needs, and recommends promising avenues of research. CMCs are also discussed in this report to provide a context for discussing high-temperature ceramic fibers and coatings.
Download or read book Interfacial Phenomena in Composite Materials 91 written by Ignaas Verpoest and published by Elsevier. This book was released on 2017-05-04 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interfacial Phenomena in Composite Materials '91 is a collection of papers dealing with the science of composite interfaces, with emphasis on theoretical modeling, test methods, and characterization methods of polymer matrix, metal, or ceramic matrix composites. One paper reviews the micromechanical test methods used in evaluating mechanical properties of fiber-matrix interface. Another paper shows that the critical fiber length cannot always be considered a material constant in the framework of load transfer models based on the shear lag theory. Microwave plasma treatment is a quick technology to change fiber surface structure as the oxidation or the roughening of the fiber increases fiber-matrix adhesion. Another paper evaluates the effect of improved adhesion on mechanical performance under static, dynamic, and impact conditions. It also examines the role of fiber anisotropy on the performance of high performance polyethylene/epoxy composites. By using the Laser Raman Spectroscopy, the investigator can analyze the effects of the fiber surface treatment, the fiber modulus, the curing temperature on the Shear strength, and the fracture mechanics of the interface. The collection can be read profitably by chemists, biochemists, and academicians involved in material compound research.
Download or read book Controlled Interphases in Composite Materials written by Hatsuo Ishida and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 821 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third International Conference on Composite Interfaces (ICCI-III) was held under the auspecies of ASM International, The Aluminum Company of America (Alcoa), The Edison Polymer Innovation Co. (EPIC), Case Western Reserve University, Nippon Glass Fiber Co., Nitto Boseki Co., Office of Naval Reserach (ONR), SAMPE Japan, Teijin Co., Mobay Co., Union Carbide Co., and Vetrotex Sain-Gobain. The underlying philosophy of the conference continues to be the promotion of fundamental understanding of the structure and role of composite interfaces. With the growth of composite interface studies, the research direction naturally changes from characterization and understanding of interfacial structure to controlling this structure. For this reason, the conference was subtitled, "Controlled Interphase Structure." The rather unfamiliar phrase "interphase" is used to emphasize the interfacial region whose properties are different from the bulk. The importance of the interphase to the mechanochemical properties has been rapidly recognized among composite researchers in recent years. The conference incorporated nine sessions. No concurrent sessions were planned because of the strong interest among panicipants and organizers to intennix researchers from different disciplines. Papers presented were redistributed in Pans I throught V. Because of this, both the conference and proceedings are not organized based on the traditional disciplines or materials, but rather around concepts.
Download or read book High Temperature Ceramic Matrix Composites written by R. Naslain and published by Woodhead Publishing Limited. This book was released on 1993 with total page 864 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Interface and Adhesion written by Wu and published by CRC Press. This book was released on 1982-03-31 with total page 654 pages. Available in PDF, EPUB and Kindle. Book excerpt: Poly mer Interface and Adhesion provides the critical basis for further advancement in thisfield. Combining the principles of interfacial science, rheology, stress analysis, and fracturemechanics, the book teaches a new approach to the analysis of long standing problemssuch as: how is the interface formed; what are its physical and mechanical properties;and how does the interface modify the stress field and fracture strength of the material.The book offers many outstanding features, including extensive listings of pertinent references, exhaustive tabulations of the interfacial properties of polymers, critical reviews ofthe many conflicting theories, and complete discussions of coupling agents, adhesion promotion, and surface modifications. Emphasis is placed on physical concepts and mechanisms, using clear, understandable mathematics.Polymer Interface and Adhesion promotes a more thorough understanding of the physical, mechanical, and adhesive properties of multiphase, polymer systems. Polymer scientistsand engineers, surface chemists, materials scientists, rheologists, as well as chemical andmechanical engineers interested in the research, development or industrial applications ofpolymers, plastics, fibers, coatings, adhesives, and composites need this important newsource b
Download or read book American Society of Composites Ninth International Conference Proceedings written by Amer Society Composi and published by CRC Press. This book was released on 1994-09-23 with total page 1338 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Interfaces in Particle and Fibre Reinforced Composites written by Kheng-Lim Goh and published by Woodhead Publishing. This book was released on 2019-11-27 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interfaces in Particle and Fibre-Reinforced Composites: From Macro- to Nanoscale addresses recent research findings on the particle-matrix interface at different length scales. The book's main focus is on the reinforcement of materials by particles that can result in a composite material of high stiffness and strength, but it also focuses on how the particle interacts with the (matrix) material, which may be a polymer, biological-based material, ceramic or conventional metal. The different types of particle reinforced composites are discussed, as is load transfer at the particle-matrix interface. Readers will learn how to select materials and about particle structure. Significant progress has been made in applying these approaches, thus making this book a timely piece on recent research findings on the particle-matrix interface at different length scales. - Features wide coverage, from polymer, to ceramics and metal-based particulate composites - Structured in a logical order to cover fundamental studies, computer simulations, experimental techniques and characterization
Download or read book High Performance Structural Fibers for Advanced Polymer Matrix Composites written by National Research Council and published by National Academies Press. This book was released on 2005-06-09 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt: Military use of advanced polymer matrix composites (PMC)â€"consisting of a resin matrix reinforced by high-performance carbon or organic fibersâ€"while extensive, accounts for less that 10 percent of the domestic market. Nevertheless, advanced composites are expected to play an even greater role in future military systems, and DOD will continue to require access to reliable sources of affordable, high-performance fibers including commercial materials and manufacturing processes. As a result of these forecasts, DOD requested the NRC to assess the challenges and opportunities associated with advanced PMCs with emphasis on high-performance fibers. This report provides an assessment of fiber technology and industries, a discussion of R&D opportunities for DOD, and recommendations about accelerating technology transition, reducing costs, and improving understanding of design methodology and promising technologies.
Download or read book Dissertation Abstracts International written by and published by . This book was released on 2003 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ICCS21 written by Antonio J.M. Ferreira and published by Società Editrice Esculapio. This book was released on 2018-07-23 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is well-known that the topic of composite mate- rials affects many engineering fields, such as civil, mechanical, aerospace, automotive and chemical. In the last decades, in fact, a huge number of scientific papers concerning these peculiar constituents has been published. Analogously, the industrial progress has been extremely noticeable. The study of composite materials, in general, is a challenging activity since the advancements both in the academia and in the industry provide continually new sparks to develop innovative ideas and applications. The communication, the sharing and the exchange of views can surely help the works of many researchers. This aspect represents the main purpose of this Conference, which aims to collect high-level contributions on the development and the application of composite materials. The establishment of this 21st edition of International Conference on Composite Structures has appeared appropriate to continue what has been begun during the previous editions. ICCS wants to be an occasion for many researchers from each part of the globe to meet and discuss about the recent advancements regarding the use of composite structures, sandwich panels, nanotechnology, bio-composites, delamination and fracture, experimental methods, manufacturing and other countless topics that have filled many sessions during this conference. As a proof of this event, which has taken place in Bologna (Italy), selected plenary and key-note lectures have been collected in the present book.
