Download or read book Investigations and Applications of Severe Plastic Deformation written by Terry C. Lowe and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Material processing techniques that employ severe plastic deformation have evolved over the past decade, producing metals, alloys and composites having extraordinary properties. Variants of SPD methods are now capable of creating monolithic materials with submicron and nanocrystalline grain sizes. The resulting novel properties of these materials has led to a growing scientific and commercial interest in them. They offer the promise of bulk nanocrystalline materials for structural; applications, including nanocomposites of lightweight alloys with unprecedented strength. These materials may also enable the use of alternative metal shaping processes, such as high strain rate superplastic forming. Prospective applications for medical, automotive, aerospace and other industries are already under development.

Download or read book Nanostructured Materials by High Pressure Severe Plastic Deformation written by Yuntian T. Zhu and published by Springer Science & Business Media. This book was released on 2006-01-20 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recently, it was reported that nanostructured materials processed under high pressure by HPT and ECAP have an extraordinary combination of both high strength and high ductility, which are two desirable, but rarely co-existing properties. These findings indicate that high-pressure is a critical factor that can be employed to process nanostructured materials with superior mechanical, and possibly also physical, properties. It is the objective of this workshop to review our current knowledge, identify issues for future research, and discuss future directions on the processing and properties of nanostructured materials via SPD techniques, with a special emphasis on high-pressure effects. The 42 peer-reviewed papers in this book cover areas of high pressure effect on the nanostructure and properties of SPD-processed materials, fundamentals of nanostructured materials, development of high-pressure SPD technologies for commercializations, recent advances of SPD technologies as well as applications and future markets of SPD-processed nanostructured materials.

Download or read book Nanomaterials by Severe Plastic Deformation written by Michael J. Zehetbauer and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings of the "Second International Conference on Nanomaterials by Severe Plastic Deformation" review the enormous scientific avalanche that has been developing in the field over recent years. A valuable resource for any scientist and engineer working in this emerging field of nanotechnology.

Download or read book Nanostructures Synthesis Functional Properties and Application written by Thomas Tsakalakos and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Advanced Study Institute on Synthesis, Functional Properties and Applications of Nanostructures, held at the Knossos Royal Village, Heraklion, Crete, Greece, July 26, 2002 - August 4, 2002, successfully reviewed the state-of-the-art of nanostructures and nanotechnology. It was concluded that Nanotechnology is widely agreed to be the research focus that will lead to the next generation of breakthroughs in science and engineering. There are three cornerstones to the expectation that Nanotechnology will yield revolutionary advances in understanding and application: • Breakthroughs in properties that arise from materials fabricated from the nanoscale. • Synergistic behavior that arise from the combination of disparate types of materials (soft vs. hard, organic vs. inorganic, chemical vs. biological vs. solid state) at the nanoscale. • Exploitation of natural (e.g. chemical and biological) assembly mechanisms that can accomplish structural control at the nanoscale. It is expected that this will lead to paradigms for assembling bio-inspired functional systems that accomplish desirable properties that are either unavailable or prohibitively expensive using top-down approaches.

Download or read book Severe Plastic Deformation written by Ghader Faraji and published by Elsevier. This book was released on 2018-07-14 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Severe Plastic Deformation: Methods, Processing and Properties examines all severe plastic deformation techniques developed over the past two decades, exploring the appropriate severe plastic deformation method for a particular case. The book offers an overview of these methods, introduces ultrafine-grained and nano-grained metals and methods for various bulk, sheet, tubular and large size samples, reviews effective parameters to make a severe plastic deformation method better, from property (mechanical) and processing (cost, time, load, etc.) viewpoints, discusses mechanical, physical and chemical properties of UFG and NS metals, and concludes with various applications for these methods. Over the last several decades, a large number of severe plastic deformation methods have been developed for processing a wide array of metals for superior properties, making this a timely resource. Collects all severe plastic deformation methods in a unique reference Compares severe plastic deformation methods from several viewpoints, including processing and final property Classifies severe plastic deformation methods based on the sample shape and mechanics, as well as the properties achieved in the processed metal Introduces ultrafine-grained and nano-grained metals and methods for various bulk, sheet, tubular and large size samples

Download or read book Severe Plastic Deformation written by Burhanettin Altan and published by Nova Publishers. This book was released on 2006 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: It has been already well established that the nanostructured materials (materials with a grain size of 100mm or less) is the future materials. Nanostructured materials possess properties superior to those of conventional, coarse grained materials. Hence designing potentially cost efficient and environmentally friendly products with better performance is a possibility. Among others, nanostructured materials exhibit increased strength, hardness and ductility and provide an opportunity for superplastic forming. When all the procedures in use for the production of nanostructured materials are examined, only severe plastic deformation (SPD) processes exhibit a potential for producing relatively large samples suitable for industrial applications. In this monograph, the state-of-the-art on severe plastic deformation methods is presented in one volume. The monograph is organised into eight chapters, each of which contains papers on different aspect of severe plastic deformation methods prepared by the experts in this field. The topics covered in the monograph are structure formation, phase transformation, superplasticity, mechanical properties of nanostructured materials, electronic and magnetic properties of nanostructured materials, deformation analysis, novel SPD methods, commercialisation of ECAE method.

Download or read book Ultrafine Grained Materials II written by Yuntian Theodore Zhu and published by John Wiley & Sons. This book was released on 2013-09-25 with total page 886 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of a symposium sponsored by the Shaping and Forming Committee of the Materials Processing and Manufacturing Division (MPMD) and the Mechanical Behavior Committee (Jt. SMD/ASM-MSCTS) of the Structural Materials Division (SMD) of TMS (The Minerals, Metals & Materials Society) and held during the 2002 TMS Annual Meeting in Seattle, Washington February 17-21,2002.

Download or read book Severe Plastic Deformation and Thermomechanical Processing Nanostructuring and Properties written by Andrea Bachmaier and published by MDPI. This book was released on 2021-02-11 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Severe plastic deformation (SPD) is a very attractive research field for metallic materials because it provides new possibilities for manufacturing nanostructured materials in large quantities and allows microstructural design on different hierarchical levels. The papers included in this issue address the following topics: novel SPD processes as well as recent advancements in established processing methods, microstructure evolution and grain refinement in single- and multi-phase alloys as well as composites, strategies to enhance the microstructure stability at elevated temperatures, mechanically driven phase transformations, surface nanostructuring, gradient and multilayered materials, and mechanical and physical properties of SPD-processed materials.

Download or read book Plastic Deformation written by Daniel Hubbard and published by Nova Science Publishers. This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the processes, properties and applications of plastic deformation. The first chapter provides short notes on the grains modification induced by local plastic deformation. Chapter Two examines energy accumulation and mechanisms of plastic deformation in organic glassy polymers. Chapter Three investigates the microstructure and texture of the pure magnesium foils obtained by room temperature reverse extrusion followed by cold rolling. The final chapter discusses utilization of severe plastic deformation (SPD) to produce ultrafine grained structures using top-down approach in novel metal forming processes.

Download or read book Advances in Material Science and Engineering written by Mokhtar Awang and published by Springer Nature. This book was released on 2021-07-05 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected papers from the 6th International Conference on Mechanical, Manufacturing and Plant Engineering (ICMMPE 2020), held virtually via Google Meet. It highlights the latest advances in the emerging area, brings together researchers and professionals in the field and provides a valuable platform for exchanging ideas and fostering collaboration. Joining technologies could be changed to manufacturing technologies. Addressing real-world problems concerning joining technologies that are at the heart of various manufacturing sectors, the respective papers present the outcomes of the latest experimental and numerical work on problems in soldering, arc welding and solid-state joining technologies.

Download or read book Advanced Biomaterials and Biodevices written by Ashutosh Tiwari and published by John Wiley & Sons. This book was released on 2014-06-30 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: This cutting-edge book focuses on the emerging area of biomaterials and biodevices that incorporate therapeutic agents, molecular targeting, and diagnostic imaging capabilities The design and development of biomaterials play a significant role in the diagnosis, treatment, and prevention of diseases. When used with highly selective and sensitive biomaterials, cutting-edge biodevices can allow the rapid and accurate diagnosis of disease, creating a platform for research and development, especially in the field of treatment for prognosis and detection of diseases in the early stage. This book emphasizes the emerging area of biomaterials and biodevices that incorporate therapeutic agents, molecular targeting, and diagnostic imaging capabilities. The 15 comprehensive chapters written by leading experts cover such topics as: The use of severe plastic deformation technique to enhance the properties of nanostructured metals Descriptions of the different polymers for use in controlled drug release Chitin and chitosan as renewable healthcare biopolymers for biomedical applications Innovated devices such as “label-free biochips” and polymer MEMS Molecular imprinting and nanotechnology Prussian Blue biosensing applications The evaluation of different types of biosensors in terms of their cost effectiveness, selectivity, and sensitivity Stimuli-responsive polypeptide nanocarriers for malignancy therapeutics

Download or read book Agile Manufacturing Systems written by K Hans Raj and published by ALPHA SCIENCE INTERNATIONAL LIMITED. This book was released on 2011-12-17 with total page 916 pages. Available in PDF, EPUB and Kindle. Book excerpt: Agility has become very important for the industries today as the lifetimes of the products are continuously shrinking. This book provides an excellent opportunity for updating understanding of agile methods from the design, manufacturing and business process perspectives, whether one is an industrial practitioner, academic researcher engineer or business graduate student. This volume is a compilation of various important aspects of agility consisting of systemic considerations in manufacturing, agile software systems, agile business systems, agile operations research, flexible manufacturing systems, advanced manufacturing systems with improved materials and mechanical behavior of products, agile aspects of design, clean and green manufacturing systems, environment, agile defence systems.

Download or read book Nanomaterials by Severe Plastic Deformation written by Zenji Horita and published by . This book was released on 2006 with total page 1060 pages. Available in PDF, EPUB and Kindle. Book excerpt: Severe Plastic Deformation (SPD) has proved to be an attractive tool for obtaining ultrafine-grained and nanocrystalline materials in bulk form; free of defects such as pores and impurities.

Download or read book Theoretical Investigations Of The Plastic Deformation Of Metals written by Doris Kuhlmann-Wilsdorf and published by . This book was released on 1953 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Special Issue on Severe Plastic Deformation for Production of Ultrafine Structures and Unusual Mechanical Properties Investigating Role of High density Lattice Defects written by Zenji Horita and published by . This book was released on 2008 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Mechanical Nanostructuring written by Mahmood Aliofkhazraei and published by John Wiley & Sons. This book was released on 2016-05-02 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing in-depth information on how to obtain high-performance materials by controlling their nanostructures, this ready reference covers both the bottom-up and the top-down approaches to the synthesis and processing of nanostructured materials. The focus is on advanced methods of mechanical nanostructuring such as severe plastic deformation, including high pressure torsion, equal channel angular processing, cyclic extrusion compression, accumulative roll bonding, and surface mechanical attrition treatment. As such, the contents are inherently application-oriented, with the methods presented able to be easily integrated into existing production processes. In addition, the structure-property relationships and ways of influencing the nanostructure in order to exhibit a desired functionality are reviewed in detail. The whole is rounded off by a look at future directions, followed by an overview of applications in various fields of structural and mechanical engineering. With its solutions for successful processing of complex-shaped workpieces and large-scale specimens with desired properties, this is an indispensable tool for purposeful materials design.

Download or read book Materials Under Extreme Conditions written by A. K. Tyagi and published by Elsevier. This book was released on 2017-01-13 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials Under Extreme Conditions: Recent Trends and Future Prospects analyzes the chemical transformation and decomposition of materials exposed to extreme conditions, such as high temperature, high pressure, hostile chemical environments, high radiation fields, high vacuum, high magnetic and electric fields, wear and abrasion related to chemical bonding, special crystallographic features, and microstructures. The materials covered in this work encompass oxides, non-oxides, alloys and intermetallics, glasses, and carbon-based materials. The book is written for researchers in academia and industry, and technologists in chemical engineering, materials chemistry, chemistry, and condensed matter physics. - Describes and analyzes the chemical transformation and decomposition of a wide range of materials exposed to extreme conditions - Brings together information currently scattered across the Internet or incoherently dispersed amongst journals and proceedings - Presents chapters on phenomena, materials synthesis, and processing, characterization and properties, and applications - Written by established researchers in the field