Download or read book Investigation on the Surface Modification of Titanium Based Alloys for Improved Bioactivity written by Mohammad Mohsin Hossain and published by . This book was released on 2012 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium-based engineering materials are currently considered to be the best artificial implant materials because of their good mechanical strength, resistance to corrosion, and their nontoxic compatibility with the stable oxide, TiO2. Ti6Al4V alloy is biologically inert, showing limited interaction with human tissue to their native oxide surface, which generally results in mechanical fixation. If the material is able to interact directly with tissue through chemical bonding, thus leading to a bioactive fixation, this will make a better and stronger implant for the promotion of cell attachment and migration and bone growth. Surface modification can improve the properties of surface oxide, leading to the formation of a stable oxide layer on the alloy's surface, and thus resulting in greater bioactivity. Surface modification is performed through surface chemical treatments, coatings deposition and chemical and thermal oxidation at a variety of process temperatures. The acid-alkaline-treated surface shows rougher, higher wettability and the presence of oxide of TiO2, as per the averaged results. In a comparison of roughness, wettability, and surface chemistry, no differences are observed between the original and solvent-treated surfaces. The crystalline structure of the surface treated samples reveals alpha and beta phases of Ti6Al4V alloy. However, the alpha 110 peak has only appeared on acid-alkaline substrate. This appearance is probably caused by a change of orientation of the crystallographic plane. Bioactivity results show no differences in Ca-P deposition between the surfaces, leading to CaHPO4, Ca/P~1.0. Some clusters deposit only on the original and solvent-treated surfaces which contain higher Ca-P than the surfaces in the non-cluster region, as observed by SEMEDS. Chemical oxidation treatments are conducted on the original surfaces by the H2O2, 37°C and H2O2, 80°C. Crystalline phases are generally associated with titanium alpha-beta, and a few with anatase and rutile. All the oxidised surfaces are defected by the presence of pores. Ti peaks are seen on the surfaces oxidised by H2O2, 37°C but no longer seen on the surfaces oxidised by H2O2, 80°C, except on the oxidised original surface. TiO2 concentrations are found quantitatively in the Ti 2p and O 1s spectra. A hydroxyl-rich oxides concentration is found at similar levels on all the oxidised surfaces. The oxidised acid-alkaline surface appears to be rougher than the other oxidised surfaces but the effects on the surface hydrophilicity are similar. Bioactivity results show a higher concentration of Ca-P deposits, leading to hydroxyapatite, Ca/P~1.6±0.1. The Ca-P deposition in SBF is increased from 3 to 14 days, as observed by XPS. Thick cluster layers are observed on the oxidised surfaces of the samples incubated for 14 days; these are composed of O, Ca and P; Ca/P~1.5, as observed by SEMEDS. Coating depositions of Ti and TiO2 are performed on the solvent-treated surface. XPS results show no Ti peaks present on the TiO2-deposited surface. The TiO2-deposited surface appears to be rougher and less hydrophilic than other surfaces. No significantly different Ca-P depositions are found on the deposited surfaces as results of CaHPO4 and Ca/P~1.0, which do not exhibit a good bioactive response. The chemically oxidised surfaces show a similarly roughened effect on all the oxidised surfaces. The oxidised Ti- and TiO2-deposited surfaces appear to be more hydrophilic than the oxidised solvent-treated alloys. The chemically oxidised surfaces reveal that Ca-P depositions increase, leading to hydroxyapatite, Ca/P~1.6±0.1 and that there are no differences in the oxidised deposited surfaces of any of the samples incubated from between 3 to 14 days. The Ca-P depositions on the oxidised deposited surfaces are found to have almost half the value of those on the oxidised solventtreated surfaces. The effects of thermal and chemical oxidation on the Ti-deposited samples are investigated. The crystalline structure is transformed from anatase to rutile in an increasing thermal temperature treatment of up to 800°C. At higher magnification, a thin layer with a porous structure is observed on the chemically oxidised surfaces. Shiny oxide layers are seen on the thermally oxidised surfaces. The concentration of atomic oxygen increases as the thermal temperature is increased from 100°C to 800°C, as observed by EDS. The surface chemistry results show that the content of chemically and thermally oxidised surfaces comprises hydroxyl-rich oxides and hydroxyl-poor oxides, respectively. Bioactivity results show that the chemically oxidised surface is able to deposit more Ca-P, leading to the formation of hydroxyapatite, Ca/P~1.7±0.1. However, the thermally oxidised surfaces deposit Ca(H2PO4)2 and, CaCO3 and P2O5 at temperatures of 100°C, 400°C and 800°C, respectively, at Ca/P~0.5. It has been conclusively proved that Ca-P depositions are dependent on the presence of hydroxyl-rich oxides. Apatite nucleation can be formally initiated at the stage of the completion of Ca-P depositions and can actively promote bone-growth after the material has been implanted.

Download or read book Surface Modification of Titanium and Titanium Alloys to Enhance Bone Healing written by Yasmeen Janzeer and published by . This book was released on 2013 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Titanium and its Alloys written by Janina Adamus and published by Trans Tech Publications Ltd. This book was released on 2016-04-21 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings of the 12th National Scientific Conference “Ti-2015” contains 35 peer-reviewed articles from 16 Polish scientific centres which cover a wide range of basic and applied aspects of the research, modelling, processing and application of titanium and its alloys. The conference “Titanium and its alloys” is biannual national conference that has been held in Poland since 1990. It is an occasion to bring together scientists and practitioners, exchange their knowledge and experiences. The aim of the proceedings is to develop and promote the use of titanium in technology and medicine. The presented contributions cover these main topics: - Forming the structure and microstructure of titanium materials as well as their physical, chemical and mechanical properties - Surface engineering, advanced technologies of surface and thermo-plastic treatment

Download or read book Surface Modification of Magnesium and its Alloys for Biomedical Applications written by T.S.N. Sankara Narayanan and published by Elsevier. This book was released on 2015-01-08 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface modification of magnesium and its alloys for biomedical applications: Biological interactions, mechanical properties and testing, the first of two volumes, is an essential guide on the use of magnesium as a degradable implant material. Due to their excellent biocompatibility and biodegradability, magnesium based degradable implants provide a viable option for the permanent metallic implants. This volume focuses on the fundamental concepts of surface modification of magnesium, its biological interactions, mechanical properties and, in vitro and in vivo testing. The contents of volume 1 is organized and presented in three parts. Part 1 reviews the fundamental aspects of surface modification of magnesium, including surface design, opportunities, challenges and its role in revolutionizing biodegradable biomaterials. Part 2 addresses the biological and mechanical properties covering an in vivo approach to the bioabsorbable behavior of magnesium alloys, mechanical integrity and, the effects of amino acids and proteins on the performance of surface modified magnesium. Part 3 delves in to testing and characterization, exploring the biocompatibility and effects on fatigue life alongside the primary characteristics of surface modified magnesium. All chapters are written by experts, this two volume series provides systematic and thorough coverage of all major modification technologies and coating types of magnesium and its alloys for biomedical applications. - Expert analysis of the fundamentals in surface modification of magnesium and its alloys for biomedical applications - Includes biological interactions and mechanical properties - Focuses on testing and characterisation, as well as biocompatibility

Download or read book Surface Modification of Titanium for Hard tissue Engineering Applications written by Murali Krishna Duvvuru and published by . This book was released on 2018 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium (Ti) and its alloys are widely used in dental and orthopedic applications due to their advantages such as biocompatibility, excellent corrosion resistance and mechanical properties like low Young's modulus, low density and high strength as compared to other metallic implants. However, lack of interaction with host tissue (e.g. bioinertness), higher modulus of elasticity as compared to that of bone and resultant stress shielding cause fibrous tissue formation around the implant where the interaction with tissue is minimized. These will eventually cause the implant loosening and revision surgery is needed. Surface modification of Ti by increasing surface roughness and/or incorporation of trace elements where cellular interaction is improved, is a promising technique to enhance the bioactivity. Surface modification can be achieved through alkali treatment, acidic treatment, sol-gel, and electrochemical anodization. Among these techniques, anodization has received significant attention as it allows formation of uniform titanium nanotubes throughout the material. Although this method is simple, low cost and controllable, modification of complicated geometries by this method is a concern. On the other hand, alkali treatment method is available to increase the surface roughness of metals with various geometries by formation of porous network structure. To further increase the bioactivity of biomaterial and enhance the osteointegration, incorporation of trace elements such as strontium (Sr), magnesium (Mg), silver (Ag) and iron (Fe) is beneficial. The objective of this research is to optimize the anodization and alkali treatment techniques, along with Fe deposition using physical vapor deposition (PVD) method. Different anodization conditions, alkali concentrations and Fe coating thicknesses were selected and their effects on surface morphology was studied. Finally, the effects of surface modification alone or in combination with Fe deposition on bone cell interaction will be investigated.

Download or read book Surface Coating and Modification of Metallic Biomaterials written by Cuie Wen and published by Woodhead Publishing. This book was released on 2015-03-31 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite advances in alternative materials, metals are still the biomaterial of choice for a number of clinical applications such as dental, orthopedic and cardiac implants. However, there are a number of intrinsic problems associated with implanting metal in the biological environment, such as wear, corrosion, biocompatibility and toxicity, which must be addressed. Modern technology has enabled scientists to modify metal surfaces or apply special coatings to metals to improve their performance safety. Surface Coating and Modification of Metallic Biomaterials will discuss the most important modification techniques and coatings for metals, first covering the fundamentals of metals as a biomaterial and then exploring surface modification techniques and coatings. - An expansive overview of surface modification techniques for biomedical use - In-depth exploration of issues arising from metal biomaterial use - Includes examples of applications in a clinical setting

Download or read book TMS 2016 Supplemental Proceedings written by The Minerals, Metals & Materials Society (TMS) and published by John Wiley & Sons. This book was released on 2016-02-09 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt: The TMS 2016 Annual Meeting Supplemental Proceedings is a collection of papers from the TMS 2016 Annual Meeting & Exhibition, held February 14-18 in Nashville, Tennessee, USA. The papers in this volume represent 21 symposia from the meeting. This volume, along with the other proceedings volumes published for the meeting, and archival journals, such as Metallurgical and Materials Transactions and Journal of Electronic Materials, represents the available written record of the 67 symposia held at TMS2016. This proceedings volume contains both edited and unedited papers; the unedited papers have not necessarily been reviewed by the symposium organizers and are presented “as is.” The opinions and statements expressed within the papers are those of the individual authors only, and no confirmations or endorsements are intended or implied.

Download or read book Bioactive bone regenerative materials and bionic prosthesis interfaces written by He Liu and published by Frontiers Media SA. This book was released on 2023-01-18 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Development and Application of Biomedical Titanium Alloys written by Liqiang Wang and published by Bentham Science Publishers. This book was released on 2018-04-05 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium and its alloys have been widely used as biomedical implant materials due to their low density, good mechanical properties, superior corrosion resistance and biocompatibility when compared with other metallic biomaterials such as Co–Cr alloys and stainless steels. Recently, β-type titanium alloys have been increasingly considered as excellent implant materials because of the remarkable combination of high strength-to-weight ratio, good fatigue resistance, relatively low Young's modulus, good biocompatibility and high corrosion resistance relative to conventional titanium biomaterials. This book covers recent information about biomedical titanium alloy development and 3D printing. Chapters describe the processing, microstructure, mechanical properties and corrosion properties in detail. Information about the surface modification of titanium alloys for biomedical applications, and manufacturing of titanium alloys by new technologies (such as selective laser melting and electron beam melting), is also presented. Readers will learn about the various types of biomedical titanium alloys, their advantages and disadvantages, their fabrication methods and medical applications. This book is a useful handbook for biomedical engineers, metallurgists and biotechnicians seeking information about titanium-based alloys for biomaterials research and development.

Download or read book Ti Based Biomaterials written by Jarosław Jakubowicz and published by MDPI. This book was released on 2020-06-17 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recently, great attention has been paid to materials that can be used in the human body to prepare parts that replace failed bone structures. Of all materials, Ti-based materials are the most desirable, because they provide an optimum combination of mechanical, chemical, and biological properties. The successful application of Ti biomaterials has been confirmed mainly in dentistry, orthopedics, and traumatology. Titanium biocompatibility is practically the highest of all metallic biomaterials; however, new solutions are being sought to continuously improve their biocompatibility and osseointegration. Thus, the chemical modification of Ti results in the formation of new alloys or composites, which provide new perspectives for Ti biomaterials applications. This book covers broad aspects of Ti-based biomaterials concerning the design of their structure, mechanical, and biological properties. This book demonstrates that the new Ti-based compounds and their surface treatment provide the best properties for biomedical applications.

Download or read book Advances in Calcium Phosphate Biomaterials written by Besim Ben-Nissan and published by Springer Science & Business. This book was released on 2014-04-17 with total page 559 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Calcium Phosphate Biomaterials presents a comprehensive, state-of-the-art review of the latest advances in developing calcium phosphate biomaterials and their applications in medicine. It covers the fundamental structures, synthesis methods, characterization methods, and the physical and chemical properties of calcium phosphate biomaterials, as well as the synthesis and properties of calcium phosphate-based biomaterials in regenerative medicine and their clinical applications. The book brings together these new concepts, mechanisms and methods in contributions by both young and “veteran” academics, clinicians, and researchers to forward the knowledge and expertise on calcium phosphate and related materials. Accordingly, the book not only covers the fundamentals but also open new avenues for meeting future challenges in research and clinical applications. Besim Ben-Nissan is a Professor of Chemistry and Forensic Science at the University of Technology, Sydney, Australia

Download or read book Recent Advances in Arthroplasty written by Samo Fokter and published by BoD – Books on Demand. This book was released on 2012-01-27 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book was to offer an overview of recent insights into the current state of arthroplasty. The tremendous long term success of Sir Charnley's total hip arthroplasty has encouraged many researchers to treat pain, improve function and create solutions for higher quality of life. Indeed and as described in a special chapter of this book, arthroplasty is an emerging field in the joints of upper extremity and spine. However, there are inborn complications in any foreign design brought to the human body. First, in the chapter on infections we endeavor to provide a comprehensive, up-to-date analysis and description of the management of this difficult problem. Second, the immune system is faced with a strange material coming in huge amounts of micro-particles from the tribology code. Therefore, great attention to the problem of aseptic loosening has been addressed in special chapters on loosening and on materials currently available for arthroplasty.

Download or read book Surface Engineering and Technology for Biomedical Implants written by Yoshiki Oshida and published by Momentum Press. This book was released on 2014-04-15 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new book synthesizes a wide range of interdisciplinary literature to provide the state-of-the art of biomedical implants. It discusses materials and explains the three basic requirements for implant success from a surface engineering perspective: biological compatibility, biomechanical compatibility, morphological compatibility. Biomedical, mechanical, and materials engineers will find this book indispensable for understanding proper treatment of implant surfaces in order to achieve clinical success. Highlights include: • Coverage of surface engineering of polymer, metallic, ceramic and composite implant materials; • Coverage of chemical, mechanical, physical, thermal, and combined surface modification technologies; • Explanations of interfacial reaction between vital tissue and non-vital implant surface; and • Methodologies and technologies for modification of surface layer/zone to promote the osteo-integration, the ultimate success for biomedical implants in both dental and medical practice.

Download or read book Titanium Alloys written by Jan Sieniawski and published by BoD – Books on Demand. This book was released on 2013-05-15 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book contains six chapters and covers topics dealing with biomedical applications of titanium alloys, surface treatment, relationships between microstructure and mechanical and technological properties, and the effect of radiation on the structure of the titanium alloys.

Download or read book Biomaterials Surface Science written by Andreas Taubert and published by John Wiley & Sons. This book was released on 2013-07-23 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: At the interface of biology, chemistry, and materials science, this book provides an overview of this vibrant research field, treating the seemingly distinct disciplines in a unified way by adopting the common viewpoint of surface science. The editors, themselves prolific researchers, have assembled here a team of top-notch international scientists who read like a "who's who" of biomaterials science and engineering. They cover topics ranging from micro- and nanostructuring for imparting functionality in a top-down manner to the bottom-up fabrication of gradient surfaces by self-assembly, from interfaces between biomaterials and living matter to smart, stimuli-responsive surfaces, and from cell and surface mechanics to the elucidation of cell-chip interactions in biomedical devices. As a result, the book explains the complex interplay of cell behavior and the physics and materials science of artificial devices. Of equal interest to young, ambitious scientists as well as to experienced researchers.

Download or read book Titanium written by Matthew J. Donachie and published by ASM International. This book was released on 2000 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed to support the need of engineering, management, and other professionals for information on titanium by providing an overview of the major topics, this book provides a concise summary of the most useful information required to understand titanium and its alloys. The author provides a review of the significant features of the metallurgy and application of titanium and its alloys. All technical aspects of the use of titanium are covered, with sufficient metals property data for most users. Because of its unique density, corrosion resistance, and relative strength advantages over competing materials such as aluminum, steels, and superalloys, titanium has found a niche in many industries. Much of this use has occurred through military research, and subsequent applications in aircraft, of gas turbine engines, although more recent use features replacement joints, golf clubs, and bicycles.Contents include: A primer on titanium and its alloys, Introduction to selection of titanium alloys, Understanding titanium's metallurgy and mill products, Forging and forming, Castings, Powder metallurgy, Heat treating, Joining technology and practice, Machining, Cleaning and finishing, Structure/processing/property relationships, Corrosion resistance, Advanced alloys and future directions, Appendices: Summary table of titanium alloys, Titanium alloy datasheets, Cross-reference to titanium alloys, Listing of selected specification and standardization organizations, Selected manufacturers, suppliers, services, Corrosion data, Machining data.

Download or read book 6th International Conference on the Development of Biomedical Engineering in Vietnam BME6 written by Toi Vo Van and published by Springer. This book was released on 2017-09-21 with total page 873 pages. Available in PDF, EPUB and Kindle. Book excerpt: Under the motto “Healthcare Technology for Developing Countries” this book publishes many topics which are crucial for the health care systems in upcoming countries. The topics include Cyber Medical Systems Medical Instrumentation Nanomedicine and Drug Delivery Systems Public Health Entrepreneurship This proceedings volume offers the scientific results of the 6th International Conference on the Development of Biomedical Engineering in Vietnam, held in June 2016 at Ho Chi Minh City.