Download or read book Investigation on Robust Codesign Methods for Networked Control Systems written by Sanad Al-Areqi and published by Logos Verlag Berlin GmbH. This book was released on 2015-12-31 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: The problem of jointly designing a robust controller and an intelligent scheduler for networked control systems (NCSs) is addressed in this thesis. NCSs composing of multiple plants that share a single channel communication network with uncertain time-varying transmission times are modeled as switched polytopic systems with additive norm-bounded uncertainty. Switching is deployed to represent scheduling, the polytopic uncertainty to overapproximatively describe the uncertain time-varying transmission times. Based on the resulting NCS model and a state feedback control law, the control and scheduling codesign problem is then introduced and formulated as a robust (minimax) optimization problem with the objective of minimizing the worst-case value of an associated infinite time-horizon quadratic cost function. Five robust codesign strategies are investigated for tackling the introduced optimization problem, namely: Periodic control and scheduling (PCS), Receding-horizon control and scheduling (RHCS), Implementation-aware control and scheduling (IACS), Event-based control and scheduling (EBCS), Prediction-based control and scheduling (PBCS). All these codesign strategies are determined from LMI optimization problems based on the Lyapunov theory. The properties of each are evaluated and compared in terms of computational complexity and control performance based on simulation and experimental study, showing their effectiveness in improving the performance while utilizing the limited communication resources very efficiently.
Download or read book Optimal and Robust Scheduling for Networked Control Systems written by Stefano Longo and published by CRC Press. This book was released on 2018-09-03 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimal and Robust Scheduling for Networked Control Systems tackles the problem of integrating system components—controllers, sensors, and actuators—in a networked control system. It is common practice in industry to solve such problems heuristically, because the few theoretical results available are not comprehensive and cannot be readily applied by practitioners. This book offers a solution to the deterministic scheduling problem that is based on rigorous control theoretical tools but also addresses practical implementation issues. Helping to bridge the gap between control theory and computer science, it suggests that the consideration of communication constraints at the design stage will significantly improve the performance of the control system. Technical Results, Design Techniques, and Practical Applications The book brings together well-known measures for robust performance as well as fast stochastic algorithms to assist designers in selecting the best network configuration and guaranteeing the speed of offline optimization. The authors propose a unifying framework for modelling NCSs with time-triggered communication and present technical results. They also introduce design techniques, including for the codesign of a controller and communication sequence and for the robust design of a communication sequence for a given controller. Case studies explore the use of the FlexRay TDMA and time-triggered control area network (CAN) protocols in an automotive control system. Practical Solutions to Your Time-Triggered Communication Problems This unique book develops ready-to-use engineering tools for large-scale control system integration with a focus on robustness and performance. It emphasizes techniques that are directly applicable to time-triggered communication problems in the automotive industry and in avionics, robotics, and automated manufacturing.
Download or read book Packet Based Control for Networked Control Systems written by Yun-Bo Zhao and published by Springer. This book was released on 2017-09-14 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces a unique, packet-based co-design control framework for networked control systems. It begins by providing a comprehensive survey of state-of-the-art research on networked control systems, giving readers a general overview of the field. It then verifies the proposed control framework both theoretically and experimentally – the former using multiple control methodologies, and the latter using a unique online test rig for networked control systems. The framework investigates in detail the most common, communication constraints, including network-induced delays, data packet dropout, data packet disorders, and network access constraints, as well as multiple controller design and system analysis tools such as model predictive control, linear matrix inequalities and optimal control. This unique and complete co-design framework greatly benefits researchers, graduate students and engineers in the fields of control theory and engineering.
Download or read book Modelling and Control of an Autonomous Two Wheeled Vehicle written by Alen Turnwald and published by Logos Verlag Berlin GmbH. This book was released on 2020-11-13 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: With respect to the future urban mobility, modern electrical bicycles, advanced motorcycles and innovative two-wheeled vehicles are arresting enormous amount of attention. Especially, model-based control and optimal trajectory planning for such vehicles are important to the research and development of the future. Therefore, a reliable and yet usable vehicle model as well as a systematic approach to motion control for two-wheeled vehicles are essential, to which this work makes a contribution. Currently available two-wheeled vehicle models are mostly either too complex to be used for a systematic control synthesis, or too simple such that the physical behaviour of the vehicle is no more represented. In this thesis, a unifying approach to modelling and control for autonomous two-wheeled vehicles is presented. The resulting model is generally valid and physically detailed enough to represent the characteristic dynamical behaviour such as the self-stability. At the same time, it is suited to a systematic control synthesis. Furthermore, the systematic extenddability, for instance by a rider, is demonstrated. The model is validated by simulations and by comparison to well-known models from the literature. The proposed vehicle model is derived in the Lagrangian and Hamiltonian framework and used for model-based optimal trajectory planning. Furthermore, a passivity-based trajectory tracking controller is designed based on the resulting port-Hamiltonian system using the so-called generalised canonical transformations. Such a controller is physically interpretable and robust against parameter uncertainties. To this end, existing approaches of passivity-based controller design are extended and adjusted for two-wheeled vehicles. Finally, a prototype two-wheeled vehicle is introduced which is used for experimental validation of the model and to demonstrate motion control algorithms for autonomous two-wheeled vehicles.
Download or read book A Hybrid Physical and Data drivApproach to Motion Prediction and Control in Human Robot Collaboration written by Min Wu and published by Logos Verlag Berlin GmbH. This book was released on 2022-06-14 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, researchers have achieved great success in guaranteeing safety in human-robot interaction, yielding a new generation of robots that can work with humans in close proximity, known as collaborative robots (cobots). However, due to the lack of ability to understand and coordinate with their human partners, the ``co'' in most cobots still refers to ``coexistence'' rather than ``collaboration''. This thesis aims to develop an adaptive learning and control framework with a novel physical and data-driven approach towards a real collaborative robot. The first part focuses on online human motion prediction. A comprehensive study on various motion prediction techniques is presented, including their scope of application, accuracy in different time scales, and implementation complexity. Based on this study, a hybrid approach that combines physically well-understood models with data-driven learning techniques is proposed and validated through a motion data set. The second part addresses interaction control in human-robot collaboration. An adaptive impedance control scheme with human reference estimation is presented. Reinforcement learning is used to find optimal control parameters to minimize a task-orient cost function without fully knowing the system dynamic. The proposed framework is experimentally validated through two benchmark applications for human-robot collaboration: object handover and cooperative object handling. Results show that the robot can provide reliable online human motion prediction, react early to human motion variation, make proactive contributions to physical collaborations, and behave compliantly in response to human forces.
Download or read book Optimal and Robust Scheduling for Networked Control Systems written by Stefano Longo and published by CRC Press. This book was released on 2018-09-03 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimal and Robust Scheduling for Networked Control Systems tackles the problem of integrating system components—controllers, sensors, and actuators—in a networked control system. It is common practice in industry to solve such problems heuristically, because the few theoretical results available are not comprehensive and cannot be readily applied by practitioners. This book offers a solution to the deterministic scheduling problem that is based on rigorous control theoretical tools but also addresses practical implementation issues. Helping to bridge the gap between control theory and computer science, it suggests that the consideration of communication constraints at the design stage will significantly improve the performance of the control system. Technical Results, Design Techniques, and Practical Applications The book brings together well-known measures for robust performance as well as fast stochastic algorithms to assist designers in selecting the best network configuration and guaranteeing the speed of offline optimization. The authors propose a unifying framework for modelling NCSs with time-triggered communication and present technical results. They also introduce design techniques, including for the codesign of a controller and communication sequence and for the robust design of a communication sequence for a given controller. Case studies explore the use of the FlexRay TDMA and time-triggered control area network (CAN) protocols in an automotive control system. Practical Solutions to Your Time-Triggered Communication Problems This unique book develops ready-to-use engineering tools for large-scale control system integration with a focus on robustness and performance. It emphasizes techniques that are directly applicable to time-triggered communication problems in the automotive industry and in avionics, robotics, and automated manufacturing.
Download or read book Control Strategies and Co Design of Networked Control Systems written by Héctor Benítez-Pérez and published by Springer. This book was released on 2018-07-31 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents Networked Control System (NCS) as a particular kind of a real-time distributed system (RTDS), composed of a set of nodes, interconnected by a network, and able to develop a complete control process. It describes important parts of the control process such as sensor and actuator activities, which rely on a real-time operating system, and a real-time communication network. As the use of common bus network architecture introduces different forms of uncertainties between sensors, actuators, and controllers, several approaches such as reconfigurable systems have been developed to tackle this problem. Moreover, modeling NCS is a challenging procedure, since there are several non-linear situations, like local saturations, uncertain time delays, dead-zones, or local situations, it is necessary to deal with. The book describes a novel strategy for modelling and control based on a fuzzy control approach and codesign strategies.
Download or read book Co design Approaches to Dependable Networked Control Systems written by Daniel Simon and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: Networked Control Systems (NCS) is a growing field of application and calls for the development of integrated approaches requiring multidisciplinary skills in control, real-time computing and communication protocols. This book describes co-design approaches, and establishes the links between the QoC (Quality of Control) and QoS (Quality of Service) of the network and computing resources. The methods and tools described in this book take into account, at design level, various parameters and properties that must be satisfied by systems controlled through a network. Among the important network properties examined are the QoC, the dependability of the system, and the feasibility of the real-time scheduling of tasks and messages. Correct exploitation of these approaches allows for efficient design, diagnosis, and implementation of the NCS. This book will be of great interest to researchers and advanced students in automatic control, real-time computing, and networking domains, and to engineers tasked with development of NCS, as well as those working in related network design and engineering fields.
Download or read book Issues in Logic Operations and Computational Mathematics and Geometry 2013 Edition written by and published by ScholarlyEditions. This book was released on 2013-05-01 with total page 1187 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues in Logic, Operations, and Computational Mathematics and Geometry: 2013 Edition is a ScholarlyEditions™ book that delivers timely, authoritative, and comprehensive information about Random Structures and Algorithms. The editors have built Issues in Logic, Operations, and Computational Mathematics and Geometry: 2013 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Random Structures and Algorithms in this book to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Issues in Logic, Operations, and Computational Mathematics and Geometry: 2013 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.
Download or read book Control and Scheduling Codesign written by Feng Xia and published by Springer Science & Business Media. This book was released on 2008-10-11 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: With emphasis on flexible resource management in networked and embedded real-time control systems operating in dynamic environments with uncertainty, this book is devoted to the integration of control with computing and communication. It covers the authors' recent and original research results within a unified framework of feedback scheduling. This useful reference also includes rich example problems, case studies, and extensive references to the literature.
Download or read book Challenges and Paradigms in Applied Robust Control written by Andrzej Bartoszewicz and published by BoD – Books on Demand. This book was released on 2011-11-16 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main objective of this book is to present important challenges and paradigms in the field of applied robust control design and implementation. Book contains a broad range of well worked out, recent application studies which include but are not limited to H-infinity, sliding mode, robust PID and fault tolerant based control systems. The contributions enrich the current state of the art, and encourage new applications of robust control techniques in various engineering and non-engineering systems.
Download or read book Robust Control for Uncertain Networked Control Systems with Random Delays written by Dan Huang and published by Springer Science & Business Media. This book was released on 2009-07-06 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Robust Control for Uncertain Networked Control Systems with Random Delays" addresses the problem of analysis and design of networked control systems when the communication delays are varying in a random fashion. The random nature of the time delays is typical for commercially used networks, such as a DeviceNet (which is a controller area network) and Ethernet network. The main technique used in this book is based on the Lyapunov-Razumikhin method, which results in delay-dependent controllers. The existence of such controllers and fault estimators are given in terms of the solvability of bilinear matrix inequalities. Iterative algorithms are proposed to change this non-convex problem into quasi-convex optimization problems, which can be solved effectively by available mathematical tools. Finally, to demonstrate the effectiveness and advantages of the proposed design method in the book, numerical examples are given in each designed control system.
Download or read book Advanced Research on Electronic Commerce Web Application and Communication written by Gang Shen and published by Springer. This book was released on 2011-03-18 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two-volume set CCIS 143 and CCIS 144 constitutes the refereed proceedings of the International Conference on Electronic Commerce, Web Application, and Communication, ECWAC 2011, held in Guangzhou, China, in April 2011. The 148 revised full papers presented in both volumes were carefully reviewed and selected from a large number of submissions. Providing a forum for engineers, scientists, researchers in electronic commerce, Web application, and communication fields, the conference will put special focus also on aspects such as e-business, e-learning, and e-security, intelligent information applications, database and system security, image and video signal processing, pattern recognition, information science, industrial automation, process control, user/machine systems, security, integrity, and protection, as well as mobile and multimedia communications.
Download or read book State Estimation and Fault Diagnosis under Imperfect Measurements written by Yang Liu and published by CRC Press. This book was released on 2022-08-31 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this book is to present the up-to-date research developments and novel methodologies on state estimation and fault diagnosis (FD) techniques for a class of complex systems subject to closed-loop control, nonlinearities, and stochastic phenomena. It covers state estimation design methodologies and FD unit design methodologies including framework of optimal filter and FD unit design, robust filter and FD unit design, stability, and performance analysis for the considered systems subject to various kinds of complex factors. Features: Reviews latest research results on the state estimation and fault diagnosis issues. Presents comprehensive framework constituted for systems under imperfect measurements. Includes quantitative performance analyses to solve problems in practical situations. Provides simulation examples extracted from practical engineering scenarios. Discusses proper and novel techniques such as the Carleman approximation and completing the square method is employed to solve the mathematical problems. This book aims at Graduate students, Professionals and Researchers in Control Science and Application, Stochastic Process, Fault Diagnosis, and Instrumentation and Measurement.
Download or read book Wireless Networking Based Control written by Sudip K. Mazumder and published by Springer Science & Business Media. This book was released on 2010-11-25 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will have a broad appeal in the area of Wireless Networking-Based Control. Various engineering disciplines, control and communication science organizations will be interested in purchasing the book with a new, emerging, and important theme. Also, industry such as Honeywell and those (e.g. power industry, automotive industry, aerospace industry) interested in implementing wireless network control to express interest in purchasing this book.
Download or read book Optimal Control of Switched Systems with Application to Networked Embedded Control Systems written by Daniel Görges and published by Logos Verlag Berlin GmbH. This book was released on 2012 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis addresses optimal control of discrete-time switched linear systems with application to networked embedded control systems (NECSs). Part I focuses on optimal control and scheduling of discrete-time switched linear systems. The objective is to simultaneously design a control law and a switching (scheduling) law such that a cost function is minimized. This optimization problem exhibits exponential complexity. Taming the complexity is a major challenge. Two novel methods are presented to approach this optimization problem: Receding-horizon control and scheduling relies on the receding horizon principle. The optimization problem is solved based on relaxed dynamic programming, allowing to reduce complexity by relaxing optimality within predefined bounds. The solution can be expressed as a piecewise linear (PWL) state feedback control law. Stability is addressed via an a priori stability condition based on a terminal weighting matrix and several a posteriori stability criteria based on constructing piecewise quadratic Lyapunov functions and on utilizing the cost function as a candidate Lyapunov function. Moreover, a region-reachability criterion is derived. Periodic control and scheduling relies on periodic control theory. Both offline and online scheduling are studied. The optimization problem is solved based on periodic control and exhaustive search. The online scheduling solution can again be expressed as a PWL state feedback control law. Stability is guaranteed inherently. Several methods are proposed to reduce the online complexity based on relaxation and heuristics. Part II focuses on optimal control and scheduling of NECSs. The NECS is modeled as a block-diagonal discrete-time switched linear system. Various control and scheduling codesign strategies are derived based on the methods from Part I regarding the structural properties of NECSs. The methods presented in Part I and II are finally evaluated in a case study.
Download or read book Analysis and Synthesis of Networked Control Systems written by Yuanqing Xia and published by Springer Science & Business Media. This book was released on 2011-03-14 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis and Synthesis of Networked Control Systems focuses on essential aspects of this field, including quantization over networks, data fusion over networks, predictive control over networks and fault detection over networks. The networked control systems have led to a complete new range of real-world applications. In recent years, the techniques of Internet of Things are developed rapidly, the research of networked control systems plays a key role in Internet of Things. The book is self-contained, providing sufficient mathematical foundations for understanding the contents of each chapter. It will be of significant interest to scientists and engineers engaged in the field of Networked Control Systems. Dr. Yuanqing Xia, a professor at Beijing Institute of Technology, has been working on control theory and its applications for over ten years.
