Download or read book Investigation of Binder Rheology and Performance Outcomes of Recycled Hot mix Asphalt Using Different Rejuvenation Agents written by Kerry Jean King and published by . This book was released on 2015 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: The research presented in this thesis investigated the effect of various rejuvenation agents on the performance of hot-mix asphalt (HMA) surfacing mixes containing high levels of recycled asphalt pavement (RAP) material (30%). The research aimed to develop testing methodologies for evaluating the mechanical performance properties of HMA mixes and for the characterisation of extracted binder properties. The methodologies were used determine the effects of various rejuvenators on the mechanical performance properties and binder properties fundamental to the long-term performance of pavement surfaces. A testing methodology was developed to investigate the performance properties of five HMA mixes including four mixes that were rejuvenated using different rejuvenation agents and one control. The mechanical testing methodology provided a comprehensive assessment of mix properties that are fundamental to the long-term performance of recycled pavements. A methodology for the characterisation of extracted binders was developed to evaluate properties that had a significant effect on the performance of the binder and therefore the overall mix. The binder properties were compared to results obtained from mechanical performance tests to establish a relationship between binder rejuvenation and performance observations. The results obtained from mechanical testing demonstrated that the cracking resistance of recycled mixes could be significantly improved through the use of rejuvenation agents. Rejuvenation also decreased the stiffness of the mix and had a negative effect on the resistance of a mix to permanent deformation. From the characterisation of the binder, it was found that rejuvenation agents altered the rheological properties of the binder but did not have a notable effect on chemical composition. The rheological performance parameters of the binder correlated to the mix performance observed from mechanical tests. Overall this research has shown that rejuvenation agents can be utilised to enhance the performance of recycled mixes by restoring binder properties.

Download or read book Interaction Between New and Age hardened Binders in Asphalt Mixes Containing High Quantities of Reclaimed Asphalt Pavement and Reclaimed Asphalt Shingles written by Yuan He and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: As virgin pavement material sources become scarcer and costlier the use of higher quantities of reclaimed asphalt pavement (RAP) and reclaimed asphalt shingles (RAS) in the production of new asphalt mixes becomes increasingly desirable. RAP/RAS binder in the mix has different levels of aging. Through oxidation, the binder becomes stiffer and more rigid than virgin binder, and thus results in a pavement material that is more brittle and susceptible to fatigue and thermal cracking. The purpose of this dissertation study was to investigate the interactions between new and age binders and evaluate asphalt mixes performance. A major concern associated with the use of high percentages of RAP and/or RAS is the level of blending between virgin and age-hardened binders, because the performance of the mix can be highly influenced by the properties of the composite binder. The blending between new binder and age-hardened RAP binder can be explained through diffusion mechanisms. This research used asphalt binder testing and diffusion and aging theory to investigate the evolution of blending between virgin and RAP binders during asphalt mix production, storage, and placement. The rheological properties of a two-layer asphalt binder sample composed of virgin and simulated RAP binder were measured using a dynamic shear rheometer (DSR) after conditioning following hot mix asphalt (HMA) and warm mix asphalt (WMA) time-temperature paths during mixing and placement. The diffusion and aging coefficients for the composite binder were estimated by comparing measured shear stiffness values with those predicted using a diffusion model and considering asphalt binder aging over time. The diffusion model is solved numerically based on the finite control volume approach. Results show that the HMA results in nearly full blending of the new and aged binders following the time-temperature paths used in this study; while the WMA results in only partial blending. Traditionally, the properties of blended binders in asphalt mixes containing RAP and RAS are evaluated through rheological testing of the binder extracted and recovered from a mix. However, this approach has long been criticized for being labor intensive, for potentially altering the chemistry of the binder and consequently changing the binder rheology, for forcing blending of binders that may not have been present in the mix, and for creating hazardous material disposal issues. The research presented in this dissertation proposes an alternative approach for characterizing blended binders by testing the linear viscoelastic properties of a fine aggregate matrix (FAM) asphalt mix using a torsion bar fixture in a DSR. A procedure has been developed for preparation and testing of small FAM cylindrical FAM specimens. The results demonstrated that this testing is sensitive to FAM mixes made of different virgin binders, RAP/RAS contents, with and without rejuvenating agent. More importantly, FAM mix testing shows similar results as that from DSR binder testing and full mix testing in terms of rankings of master curves and Black diagrams. Statistical analysis (ANOVA) on stiffness values from FAM testing also provides the same conclusion to that at binder and mix levels. Therefore, FAM approach has the potential to be used as a substitute to stiffness testing for mix comparison purposes. It is also a less expensive and more efficient testing approach than the full mix testing.The combined effect of RAP, RAS, and different virgin binder sources and grades on performance of the blended binders and asphalt mixes was also investigated. Previous studies have indicated that RAP, RAS, and virgin binder grades each has certain effects on performance of the mix. The addition of RAP/RAS undermines fatigue and thermal performance and improves rutting resistance. The virgin binder grade should be carefully chosen based on the percentages of RAP/RAS in the mix. Results from unconfined RLT appears to show that reducing the binder grade when using more than 25 percent RAP results in rutting performance similar to the original grade. Therefore, it is likely safe for high temperatures if the binder grade is reduced to meet the low and intermediate temperature requirements. Asphalt binders contain different organic molecules, and thus their chemical compositions vary according to the source of the oil used in their production. Virgin binders from different sources blend differently with the age-harden oxidized binder in RAP/RAS. Therefore, depending on the level of blending between virgin and oxidized binders, the performance of the mixes could vary substantially. Findings from this work indicated that virgin binder source had some effect on the blended materials. Additional research that came from the testing approaches to complete the investigation of RAP/RAS with this dissertation were also investigated. All the asphalt mixes used in this study were designed following Caltrans modified Superpave mix design procedure and tested using an Asphalt Mixture Performance Tester (AMPT). The effects of specimen preparation variables in terms of compaction method, compaction level, test temperature, stress state, and deformation measurement location when using the AMPT to predict mix stiffness and permanent deformation were evaluated. The best approach using Superpave testing equipment that appears to best characterize expected rutting performance as defined by previous calibrated RSCH results were also investigated.

Download or read book Proceedings of the 5th International Symposium on Asphalt Pavements Environment APE written by Marco Pasetto and published by Springer Nature. This book was released on 2019-08-29 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume highlights the latest advances, innovations, and applications in the field of asphalt pavement technology, as presented by leading international researchers and engineers at the 5th International Symposium on Asphalt Pavements & Environment (ISAP 2019 APE Symposium), held in Padua, Italy on September 11-13, 2019. It covers a diverse range of topics concerning materials and technologies for asphalt pavements, designed for sustainability and environmental compatibility: sustainable pavement materials, marginal materials for asphalt pavements, pavement structures, testing methods and performance, maintenance and management methods, urban heat island mitigation, energy harvesting, and Life Cycle Assessment. The contributions, which were selected by means of a rigorous international peer-review process, present a wealth of exciting ideas that will open novel research directions and foster multidisciplinary collaboration among different specialists.

Download or read book Evaluating the Effects of Recycling Agents on Asphalt Mixtures with High RAS and RAP Binder Ratios written by Amy Epps Martin and published by . This book was released on 2020 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: "More than 90 percent of highways and roads in the United States are built using hot-mix asphalt (HMA) or warm-mix asphalt (WMA) mixtures, and these mixtures now recycle more than 99 percent of some 76.2 million tons of reclaimed asphalt pavement (RAP) and about 1 million tons of recycled asphalt shingles (RAS) each year. Cost savings in 2017 totaled approximately $2.2 billion with these recycled materials replacing virgin materials. The TRB National Cooperative Highway Research Program's NCHRP Research Report 927: Evaluating the Effects of Recycling Agents on Asphalt Mixtures with High RAS and RAP Binder Ratios presents an evaluation of how commercially available recycling agents affect the performance of asphalt mixtures incorporating RAP and RAS at high recycled binder ratios."--

Download or read book Effect of Asphalt Rejuvenating Agent on Aged Reclaimed Asphalt Pavement and Binder Properties written by Nassim Sabahfar and published by . This book was released on 2016 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hot in-place recycling (HIR) preserves distressed asphalt pavements while minimizing use of virgin binder and aggregates. The final quality of an HIR mixture depends on the characteristics of the original binder, aging of the pavement surface during service, and whether or not new binder or rejuvenator was added to the mixture. An HIR mixture should maintain desired properties for additional service periods, making asphalt binder modification inevitable. Asphalt binder modifications in HIR are commonly performed by adding an asphalt rejuvenating agent (ARA). However, ARA may adversely affect the qualities of new HIR and potentially fail to improve the quality of the final surface. The objective of this research was to investigate the effects of rejuvenation on HIR performance characteristics by assessing critical performance indicators such as stiffness, permanent deformation, moisture susceptibility, and cracking resistance. A two-step experimental program was designed that included mechanical property measurements of the HIR mixture and rheological properties of the extracted binder. The level of mixing occurring between new and aged binder with ARA was also investigated. HIR samples were obtained from three Kansas Department of Transportation projects, and Hamburg wheel-tracking device, dynamic modulus, flow number, Texas overlay, thermal stress restrained specimen, and moisture susceptibility tests were conducted on mixtures with and without ARA. Rheological studies on the extracted binder included dynamic shear rheometer and bending beam rheometer tests. The miscibility of new and aged binder was investigated using scanning electron microscope (SEM) images, energy dispersive X-ray spectroscopy (EDXS), and the exudation droplet test (EDT). Study results showed significant variability in the mechanical performance of HIR mixtures, which was attributed to the variability of binders as observed in EDT, SEM, and EDXS studies. Life-cycle cost analysis (LCCA) showed that HIR is an economic maintenance alternative for asphalt projects in Kansas. LCCA results showed that pavement design strategies with HIR activities will result in alternatives with lower net present values when compared to alternatives without HIR maintenance activities.

Download or read book Long Term Effectiveness of Recycling Agents to Improve Performance Properties of Asphalt Concrete written by Mahsa Tofighian and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recycled materials such as reclaimed asphalt pavement (RAP) have been incorporated into asphalt mixtures for many years. However, their usage has increased over time as they are seen as a way to reduce the cost of asphalt mixtures, save energy, and protect the environment. Similarly, there has been a growing focus on the utilization of recycled asphalt shingles (RAS) in asphalt mixtures, a pursuit undertaken by various state highway agencies. However, unless appropriate precautions are taken, as the proportion of RAP and RAS in the asphalt mixture is raised, the mixture becomes more brittle, leading to a higher risk of cracking and raveling in the asphalt pavement. Furthermore, the mixture becomes less workable and more challenging to compact in the field, increasing the potential for premature field failure. One strategy to incorporate more RAP and RAS into asphalt mixtures involves the use of specialized recycling agents (RAs), known as rejuvenating agents. Over time, asphalt mixtures undergo aging during construction and over the extended service life of asphalt pavements, resulting in the oxidation of the mix and the loss of a significant portion of the maltenes in the binder composition. Maltenes contribute to the softening effect of the binder, and these recycling agents, when used appropriately, are expected to compensate for this reduction in maltenes. The ultimate result of this rebalancing of components is the softening of the aged binder and an improvement in its resistance to cracking. This study investigates the long-term impact of bio-based and petroleum-based recycling agents (RA's) on recycled asphalt binders with varying levels of reclaimed asphalt pavement (RAP) and reclaimed asphalt shingles (RAS) content, specifically low (15%) and high (30%) RAP content and 0% and 5% RAS content. The rejuvenated binders underwent short-term and long-term aging through the use of a Rolling Thin Film Oven (RTFO) and Pressure Aging Vessel (PAV), respectively. The performance characteristics of these modified binders at various aging stages were assessed using a dynamic shear rheometer (DSR) and bending beam rheometer (BBR). The study revealed that all RA's used in this research maintained their effectiveness even after long-term aging, though the degree of effectiveness varied. Additionally, the results indicated that the petroleum-based RA required a higher dosage to achieve the same effect as the bio-based RA's. The findings from this research also demonstrated that when rejuvenators are added to mixtures with a high RAP content or a combination of RAP and RAS, the mixture's performance is enhanced in terms of low-temperature cracking and fatigue cracking. Nevertheless, it is crucial to extend this work to field pilot projects to ensure the effective application of these rejuvenating products.

Download or read book Engineered Frameworks for Evaluating the Use of Recycling Agents in Surface Asphalt Mixtures for Virginia written by Jhony Habbouche and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, several state highway agencies have introduced special provisions and specifications to allow the use of higher contents of reclaimed asphalt pavement (RAP) in asphalt surface mixtures. The challenges associated with high RAP mixtures can be addressed through the use of additives such as recycling agents (RAs) and/or softer binders. Currently, there are no specific guidelines or specifications available to evaluate the acceptability of RAs in Virginia. The purpose of this study was to evaluate the short- and long-term effectiveness of RAs in improving the performance of asphalt mixtures, particularly those with high RAP contents. Another objective of the study was to establish a performance-based framework to determine the acceptability of a specific RA product for inclusion in the Virginia Department of Transportation’s Approved Product List. Both objectives were achieved by benchmarking recycled binder blends (Phase I) and mixtures (Phase II). These were then compared in terms of laboratory performance to commonly used virgin asphalt binders and mixtures in Virginia. Moreover, a comprehensive review of the literature and information from state departments of transportation and RA suppliers on the current state of the practice regarding the use of recycled materials and RAs in asphalt mixtures was summarized. Component materials, including three virgin asphalt binders, RAP and aggregate materials from three different sources, and six RAs, were collected and tested. Phase I involved testing virgin and RAP binders; combinations of virgin binder and RAP binder; and combination of virgin binder, RAP binder, and RAs. A total of 26 binder blends were evaluated at various aging conditions through numerous rheology- and chemistry-based tests. In Phase II, 10 asphalt mixtures were designed and evaluated for durability, resistance to rutting, and resistance to cracking at various aging conditions. Cross-scale evaluation of asphalt binder and mixture testing data was established. Finally, preliminary verification was performed using data collected from various field trials constructed in Virginia. Based on the binders and mixtures tested in this study, the effectiveness of RAs in improving the properties of asphalt binder blends is specific to the product being used and to the targeted temperatures or conditions. Moreover, RAs can enhance the performance and increase the use of recycled materials in asphalt mixtures provided that the correct and suitable dosage of RA product is determined through a performance-based testing framework. The study recommends the following: (1) adopting the streamlined frameworks presented in this study to determine the acceptability of a given RA; (2) further validating the presented framework using different component materials; (3) employing balanced mix design tests to assess the performance characteristics of surface mixtures (with A and D designations) with RAs and drafting a roadmap; (4) collecting and further evaluating the field performance of all trials involving high RAP, RAs, and/or softer binders; (5) investigating the availability and activity of binders, especially with RAs, in RAP materials; (6) evaluating and establishing a protocol to assess the consistency of RAP materials; and (7) quantifying the environmental and economic impacts of using surface mixtures with high RAP contents and/or RAs.

Download or read book Improving Durability of Asphalt Mixes Produced with Reclaimed Asphalt Pavement Rap by Enhancing Binder Blending written by Hawraa Kadhim and published by . This book was released on 2019 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reclaimed Asphalt Pavement (RAP) has been favoured over virgin materials in the light of the unstable cost of virgin asphalt binders, shortage of quality aggregates, and compelling need to preserve the environment and natural resources. Mixes containing up to 20% RAP are commonly considered to have similar behaviour to virgin mixes. However, during the production process of HMA with RAP, the blending between aged and virgin binders would be partial, which would create heterogeneity in distribution of the aged recycled binder and the soft virgin binder in the HMA-RAP mixes. Hence, it is important to control the blending process between old and new binders to obtain more homogenous mix. Therefore, the main objectives of this research are to examine the kinematics of blending of aged and virgin binders by considering the time-temperature effect during mixing and silo-storage, and assess the thermo-mechanical behaviour of Hot Mix Asphalt (HMA) containing RAP at different blending states. The asphalt mixes used in this research were produced and collected at two plants (Plant 1) and (Plant 2) located in Ontario, Canada. Two Marshall mixes were produced and collected from Plant 1 including a surface course HL-3 containing 15 percent RAP and a base course HL-8 containing 30 percent RAP. These mixes were labelled as 1HL-3 and 1HL-8 respectively. In addition, two Marshall mixes were produced and collected from Plant 2 including a surface course HL-3 containing 20 percent RAP and a base course HL-8 containing 40 percent RAP. These mixes were labelled as 2HL-3 and 2HL-8 respectively. To investigate the impact of storage time on the blending progress and achieving a cohesive final binder, the mix samples were collected as a function of storage time in the silo. The first sampling was done immediately after production (t = 0-hour), and then at several time intervals of silo-storage; i.e., at 1, 4, 8, and 12 hours. In case of Plant 2, the samples were additionally collected after 24-hour of storage time. All samples were then kept in a storage room at 7ʻC until the day of compaction to minimize any further blending between aged and virgin binder. To understand the blending phenomena and its effect on the performance of the pavement, a multi-scale investigation is carried out. The blending was examined in terms of micro-mechanical and rheological properties. The microstructure of the blending zones were examined under The Environmental Scanning Electron Microscope (ESEM). In addition the effect of the silo-storage time on the rheology of the binders was investigated. The results indicate that increasing the interaction time and temperature between the aged and virgin binder significantly results in a better blending. The performance of RAP-HMA with respect to the silo-storage time was examined using Dynamic Modules Test, Thermal Stress Restrained Specimen Test (TSRST), Rutting Test, and Flexural Beam Fatigue Test. The experimental data indicates that samples collected after 12-hour of silo storage exhibited a reduction in the stiffness due to better blending of aged and virgin binder. In addition, the 12-hour samples showed enhancement in their fracture temperature, rutting depth, and fatigue life, accompanied with a better blending between their aged and virgin binder. On the other hand, the samples that collected after 24-hour silo-storage had a higher stiffness in comparison with the 8 and 12-hour samples. Moreover, the AASHTOWare Pavement Mechanistic-Empirical Design was utilized to examine the effect of the 12-hour silo-storage time on the long term performance of the pavements. Four pavement structures have been designed for this purpose. These pavements have the same structure of their granular A, granular B, and the subgrade. Yet, the first layer (surface course and base course) is a silo-storage time-dependent. The long-term field performance prediction indicates a slight improvement with the 12-hour pavements (Plant1 12hrs and Plant2 12hrs). However, it should be noted that AASHTOWare Pavement Mechanistic-Empirical Design does not appear to properly capture the effect of blending in the pavement performance. The collected experimental evidences unveils correlations between time-temperature effects and mixture performance. Based on these findings, the research provides practical recommendations to the professionals of the Canadian asphalt industry for a better use of RAP. Ultimately, this research recommends a 12-hour silo-storage time for the RAP-HMA for better performance and durability of the mixes.

Download or read book Sustainable Revitalization of Asphalt Pavements written by Muhammad Ahmad and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vegetable-based oils such as corn and soybean oil have triglycerides and fatty acids that allow them to be considered sustainable and effective recycling agents (RAs) for aged asphalt binder. However, there are concerns about their effect on the recycled asphalt binder's long-term performance, moisture damage resistance, and self-healing characteristics restoration. In this study, crude corn oil (CO) and crude soybean oil (SO) were used as RAs to restore the performance of a reclaimed asphalt binder (RAB) extracted from reclaimed asphalt pavement. The binder extracted from RAB was modified with a neat binder PG64-28 and RAs to restore the high-end performance grade. To address concerns about the long-term performance of the RAs, the modified binders were further modified with either dilauryl thiodipropionate (DLTDP) or zinc diethyldithiocarbamate(ZnDEC) as antioxidants (AO) and rheological, chemical, and moisture susceptibility analyses were conducted. Adding ZnDEC improved the binder’s rheological efficacy at resisting long-term aging but reduced the binder’s moisture resistance while adding DLTDP did not improve efficacy and resulted in inferior binders. The binders modified with RA and AO were tested for damage susceptibility and self-healing (H%) using simplified viscoelastic continuum damage theory (S-VECD) to observe whether the addition of CO restored the self-healing properties of the binder. The use of CO improved the damage resistance and H%. Later, molecular models were prepared for the studied modified binders using molecular dynamics simulation to test the capability of CO to restore rheological properties, damage resistance, and H%. The simulation showed that CO improved the modified binder model's density, viscosity, glass transition temperature, and self-healing ability. The study recommends using natural bio-oils and organic antioxidants to improve the performance of recycled binders and exploring their usefulness and their relation to life-cycle analysis and cost analysis.

Download or read book Chemical Morphological and Rheological Properties of Various Rejuvenated Asphalt Binders written by Rayhan Bin Ahmed and published by . This book was released on 2020 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Reclaimed asphalt pavement (RAP) material is considered as an economical approach for sustainable pavement construction. However, usage of higher RAP binder content is more susceptible to pavement cracking. Using rejuvenators with RAP binder is a widely used approach to address the issues related to RAP binder. This study used thin film oven test (TFOT) aged binder with three types of rejuvenators including waste cooking oil (UT/R1), modified waste cooking oil (TR/R2), and Hydrolene (HL/R3). Also, in some cases, styrene butadiene styrene (SBS) polymer was added with UT/R1 and TR/R2 rejuvenated binders to compare the performances. To understand the behavior and the performance of these rejuvenators, three sets of characterization tests were conducted: chemical, morphological, and rheological. Gas Chromatography-Mass Spectroscopy (GC-MS) and Fourier Transformed Infrared Spectroscopy (FTIR) was employed for chemical characterization, while Atomic Force Microscopy (AFM) was used for morphological analysis. Later, a frequency sweep test and surface free energy (SFE) test was conducted to understand the rheological performances and moisture damage resistance of rejuvenated asphalt binders respectively. Based on the experimentation, the study reveals that UT/R1 softens the binders most, whereas TR/R2 rejuvenator eliminates these issues and showed better rheological performances of the binder. However, in case of moisture susceptibility, TR/R2 rejuvenated binder seems to have poor resistance and the highest resistance was recorded for UT/R1 rejuvenated binders. This study observes a good correlation between chemical, morphological and rheological performances of binders which are expected to contribute to the performance evaluation and characterization of rejuvenated asphalt mixes.

Download or read book Rejuvenation of Reclaimed Asphalt Pavement RAP in Hot Mix Asphalt Recycling with High RAP Content written by Karen A. O'Sullivan and published by . This book was released on 2011 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract: This study aims to understand intermingling process between rejuvenators and aged asphalt binders in reclaimed asphalt pavement (RAP) materials during RAP recycling operations in pavement construction. This study presents results of a laboratory study on the use of rejuvenators to recycle age hardened asphalt binders in RAP. Laboratory Hot Mix Asphalt (HMA) samples were prepared with RAP millings from one specific pavement and a commercial rejuvenator, with 80 to 90 percent RAP content. The following mixes with various amount of the rejuvenator were evaluated: a control mix prepared from burned RAP aggregate and virgin asphalt binder, another control mix prepared with heated RAP, a recycled RAP mix with 1% rejuvenator (at the weight of the total mix), a recycled RAP mix with 0.5% rejuvenator, and a recycled RAP mix with 0.5% rejuvenator and 0.5% virgin asphalt binder. Dynamic modulus test results of laboratory prepared samples were obtained for a range of temperatures over an eleven-week period of accelerated aging at 60o.C in an inert gas oven and a conventional convection oven. Accelerated aging protocol was used to evaluate the intermingling process associated with diffusion mechanism between the rejuvenator and aged asphalt binder while an argon inert gas oven provides an environment where oxidation-related ageing and hardening in rejuvenated asphalt binders can be eliminated. The dynamic modulus data of six distinct mixes were statistically analyzed and compared to the results reported in the literature for virgin and low percentage recycled mixes. Collected data suggest that the use of rejuvenator is a viable option for recycling HMA with high RAP material content.

Download or read book 100 Recycled Hot Mix Asphalt and the Use of Rejuvenators written by Martins Zaumanis and published by . This book was released on 2014 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract: The desire to find more sustainable paving practices as well as the dramatically rising binder costs driven by the growing global demand for paved roads, has led to increased interest of the use of reclaimed asphalt pavement (RAP) in very high amounts. So far the major industry trend has been to develop procedures, invest in technologies and build confidence in mixtures with up to 40 % RAP content. However, a few innovators have refined 100 % recycling technologies over the past four decades to a level where routine production of 100 % recycled hot mix asphalt is in clear sight. Rejuvenators are an integral part of 100 % recycled asphalt production and they can also allow to significantly increase the RAP content for conventionally produced asphalt mixtures. An evaluation of the feasibility of production of 100 % recycled hot-mix asphalt was made and the use of rejuvenators is presented in this study. 100 % recycling is discussed by evaluating ten readily available production technologies along with proposing mix design procedures and identifying best RAP management strategies. A total of eleven different products were evaluated for restoring the RAP binder grade with a definite conclusion that achieving target grade (PG or empirical specification) is possible. In addition a rheological, micromechanical and chemical characterization was performed with select rejuvenators and binders from Strategic Highway Research Program (SHRP) library. To further assess the rejuvenators and feasibility of 100 % RAP recycling a series of 100 % mixture tests were performed that indicated significant improvement in low temperature and fatigue cracking resistance while providing a rut resistant mixture. With the use of some rejuvenators a performance equal to that of reference virgin mix was achieved. Based on these findings of rejuvenator effectiveness a methodology for choice of rejuvenator type and dose was proposed. Finally, a cradle-to-gate analysis of environmental effects was performed which indicated 35 % CO2eq savings per ton of produced 100 % RAP asphalt mixture compared to virgin mix while cost analysis showed at least 50 % savings in material related expenses. A short video summarizing the research is available at http://youtu.be/y-rYvdGiEbY.

Download or read book Evaluation of Asphalt Binder and Mixture Properties that Incorporate Reclaimed Asphalt Pavement written by Sang Ki Lee (M.S. in Engineering) and published by . This book was released on 2018 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: Several private and public agencies are exploring ways in which the use of reclaimed asphalt pavement (RAP) can be increased in the construction of new pavements. However, such an increase must not come at the expense of reduced durability or life cycle cost. The use of RAP is often accompanied by some form of adjustment to the virgin binder that is being used. In Texas, the current practice of incorporating RAP is controlled by a simplified table that lists a substitute binder grade and recycled binder ratio (RBR) when RAP is incorporated in a mix. There are a few shortcomings with this simple approach of specifying a maximum ratio: (1) it does not address the potential difference in the quality of recycled binders from RAP, (2) it may result in the use of substituted binders with little or no polymer (elastomer) and (3) it does not account for the influence of recycling agents. The goal of this study was to evaluate the change in performance of binders and mixtures using different grades of virgin binder and percentages of RAP. Two different Job Mix Formulae (JMF) and corresponding materials were obtained from asphalt plants in the state of Texas. A test matrix was developed to evaluate binders and mixtures with different ratios of recycled binder to virgin binder and different ratios of RAP to virgin material, respectively. The results from this study show that addition of RAP or recycled binder (from RAP) results in an increase in stiffness and resistance to rutting, which was expected. However, the resistance to cracking showed mixed results. The test results also show that the properties of the recycled binder from RAP can vary significantly with source and have a drastic effect on the properties of the binder and mixture.

Download or read book Environment Friendly Construction Materials written by Shaopeng Wu and published by MDPI. This book was released on 2019-06-20 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Construction materials are the most widely used materials for civil infrastructure in our daily lives. However, from an environmental point of view, they consume a huge amount of natural resources and generate the majority of greenhouse gasses. Therefore, many new and novel technologies for designing environmentally friendly construction materials have been developed recently. This Special Issue, “Environment-Friendly Construction Materials”, has been proposed and organized as a means to present recent developments in the field of construction materials. It covers a wide range of selected topics on construction materials.

Download or read book Experimental Study of Hot Recycled Asphalt Mixtures with High Percentages of Reclaimed Asphalt Pavement and Different Recycling Agents written by Jinhai Yan and published by . This book was released on 2014 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hot recycled mixture has been widely used as binder course on highways in the Jiangsu Province, China. The objectives of this study were to evaluate recycled mixture's performance with different Reclaimed Asphalt Pavement (RAP) contents and recycling agents (RA). At first, optimum RA contents were determined according to asphalt blending charts based on penetration index. Secondly, the performance of recycled mixtures and control virgin asphalt mixture was evaluated based on retained stability, Tensile Strength Ratio (TSR), dynamic stability (DS), failure strain, and fatigue life. Thirdly, statistical significance on the basis of analysis of variance was evaluated as a function of RAP contents and RA type. The results indicated that adding RA could improve moisture stability, low temperature cracking resistance, while decreasing high temperature stability and strength performance of recycled mixture. Recycled asphalt mixture Sup-20 with RA has similar performance compared to virgin asphalt mixture Sup-20. The former has better moisture stability and high temperature stability than that of the latter, with a slight reduction in low temperature cracking and fatigue resistance. With a fixed RA-2, TSR, and failure strain of recycled mixes decreases, and DS first slightly decreases and then increases, while fatigue life first increases and then decreases with increasing RAP contents. The results indicated that the interface status and blending level between recycled asphalt and aggregate is variable due to the mixing process and material compositions, which results in the varied performance results of recycled mixes due to the different test temperatures, loading modes, and testing periods, etc. Furthermore, the results of analysis of variance are consistent with the experimental test results.

Download or read book Designing Recycled Hot Mix Asphalt Mixtures Using Superpave Technology written by KY. Foo and published by . This book was released on 1997 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mix design procedures for recycled asphalt pavements require the selection of virgin asphalt binder or recycling agent. This research project was undertaken to develop a procedure for selecting the performance grade (PG) of virgin asphalt binder based on the Superpave PG grading system. Blending charts, similar to the viscosity blending charts, were constructed and evaluated based on test parameters obtained from the dynamic shear rheometer (DSR). The criteria for selection was based on Superpave performance grading (PG) specification, for example, G*/sin?=1 kPa minimum for unconditioned asphalt binder, G*/sin?=2.2 kPa minimum for rolling thin film oven (RTFO) residue, and G*sin?=5 MPa maximum for RTFO and pressure aging vessel (PAV) residue. The criteria based on the fatigue parameter (G*sin?=5 MPa maximum for RTFO+PAV residue) was determined to be too liberal and, therefore, was not recommended. An alternative criteria based on the high temperature stiffness (G*/sin?) was recommended.

Download or read book Performance Evaluation of Warm Mix Recycled Asphalt Binders After Long Term Aging written by Qiang Li and published by . This book was released on 2019 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study evaluates the pavement performance evolution of warm-mix recycled asphalt binders during the secondary service period. Warm-mix recycled asphalt binders with various long-term aging levels and recycling plans were produced by the laboratory simulation method. Conventional physical properties tests, the dynamic shear rheometer test, and the bending beam rheometer test were conducted to measure the performance of recycled binders. Effects of the aging level and recycling plan on the resistance to rutting, fatigue cracking, and low temperature cracking were investigated by statistical methods. It was found that after secondary long-term aging, recycled binders are more resistant to rutting, while they are less resistant to fatigue and low temperature cracking. The modified aging kinetic model can be used to accurately characterize the effect of secondary aging time on rutting or fatigue factors for recycled binders. The resistance of aged binders to fatigue and low temperature cracking is obviously improved by adding the warm mix asphalt additive. By comparison, using styrene butadiene rubber latex enhances the binder performance in almost all aspects. The aging level has a more significant effect than the recycling plan for all performance parameters.