Download or read book Investigating the Effect of Microstructure on the Mechanical Properties of UHMWPE written by Kathleen Sarah Simis and published by . This book was released on 2004 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book UHMWPE Biomaterials Handbook written by Steven M. Kurtz and published by Academic Press. This book was released on 2009-04-27 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: UHMWPE Biomaterials Handbook describes the science, development, properties and application of of ultra-high molecular weight polyethylene (UHMWPE) used in artificial joints. This material is currently used in 1.4 million patients around the world every year for use in the hip, knee, upper extremities, and spine. Since the publication of the 1st edition there have been major advances in the development and clinical adoption of highly crosslinked UHMWPE for hip and knee replacement. There has also been a major international effort to introduce Vitamin E stabilized UHMWPE for patients. The accumulated knowledge on these two classes of materials are a key feature of the 2nd edition, along with an additional 19 additional chapters providing coverage of the key engineering aspects (biomechanical and materials science) and clinical/biological performance of UHMWPE, providing a more complete reference for industrial and academic materials specialists, and for surgeons and clinicians who require an understanding of the biomaterials properties of UHMWPE to work successfully on patient applications. The UHMWPE Handbook is the comprehensive reference for professionals, researchers, and clinicians working with biomaterials technologies for joint replacement New to this edition: 19 new chapters keep readers up to date with this fast moving topic, including a new section on UHMWPE biomaterials; highly crosslinked UHMWPE for hip and knee replacement; Vitamin E stabilized UHMWPE for patients; clinical performance, tribology an biologic interaction of UHMWPE State-of-the-art coverage of UHMWPE technology, orthopedic applications, biomaterial characterisation and engineering aspects from recognised leaders in the field

Download or read book The UHMWPE Handbook written by Steven M. Kurtz and published by Elsevier. This book was released on 2004-06-26 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recently, the orthopedic industry developed new processing techniques (radiation crosslinking), which are expected to dramatically reduce wear and improve the longevity of hip implants beyond 10 years. This book describes the history and properties of ultra-high molecular weight polyethylene (UHMWPE) used in artificial joints by describing its properties and reviewing the latest clinical results. * The most up-to-date information on the properties of UHMWPE * Endorsed by Ticona - the world's leading manufacturer of UHMWPE for medical use * An enormous 'installed base' of over 1.4 million procedures each year * UHMWPE has been used by orthopedists for over 40 years, yet its properties and performance in situ are still not well understood

Download or read book Polymer Based Additive Manufacturing written by Declan M. Devine and published by Springer Nature. This book was released on 2019-09-16 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to give readers a basic understanding of commonly used additive manufacturing techniques as well as the tools to fully utilise the strengths of additive manufacturing through the modelling and design phase all the way through to post processing. Guidelines for 3D-printed biomedical implants are also provided. Current biomedical applications of 3D printing are discussed, including indirect applications in the rapid manufacture of prototype tooling and direct applications in the orthopaedics, cardiovascular, drug delivery, ear-nose-throat, and tissue engineering fields. Polymer-Based Additive Manufacturing: Biomedical Applications is an ideal resource for students, researchers, and those working in industry seeking to better understand the medical applications of additive manufacturing.

Download or read book Microstructural Effect on Mechanical Properties written by Naresh N. Thadhani and published by . This book was released on 1995 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Green Composites for Automotive Applications written by Georgios Koronis and published by Woodhead Publishing. This book was released on 2018-11-10 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Green Composites for Automotive Applications presents cutting-edge, comprehensive reviews on the industrial applications of green composites. The book provides an elaborative assessment of both academic and industrial research on eco-design, durability issues, environmental performance, and future trends. Particular emphasis is placed on the processing and characterization of green composites, specific types of materials, such as thermoset and thermoplastic, nanocomposites, sandwich, and polymer biofoams. Additional sections cover lifecycle and risk analysis. As such, this book is an essential reference resource for R&D specialists working in materials science, automotive, chemical, and environmental engineering, as well as R&D managers in industry. Contains contributions from leading experts in the field Covers experimental, analytical and numerical analysis Deals with most important automotive aspects Provides a special section dedicated to lifecycle assessment

Download or read book Shape Memory Polymers for Biomedical Applications written by L Yahia and published by Elsevier. This book was released on 2015-03-19 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shape memory polymers (SMPs) are an emerging class of smart polymers which give scientists the ability to process the material into a permanent state and predefine a second temporary state which can be triggered by different stimuli. The changing chemistries of SMPs allows scientists to tailor important properties such as strength, stiffness, elasticity and expansion rate. Consequently SMPs are being increasingly used and developed for minimally invasive applications where the material can expand and develop post insertion. This book will provide readers with a comprehensive review of shape memory polymer technologies. Part 1 will discuss the fundamentals and mechanical aspects of SMPs. Chapters in part 2 will look at the range of technologies and materials available for scientific manipulation whilst the final set of chapters will review applications. Reviews the fundamentals of shape memory polymers with chapters focussing on the basic principles of the materials Comprehensive coverage of design and mechanical aspects of SMPs Expert analysis of the range of technologies and materials available for scientific manipulation

Download or read book 15th Wear of Materials written by Peter J. Blau and published by Elsevier. This book was released on 2005-10-03 with total page 826 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings of the 15th International Conference on Wear of Materials focus on the friction and wear of materials in various applications under different environments from the nanometer scale to the meter scale. The conference provides a unique international forum for researchers and practitioners from different disciplines to exchange latest results. Coverage includes: . Wear assessment and monitoring . Wear modeling, mechanisms, mapping and prediction . Wear-corrosion testing and control . Surface engineering for wear and wear-corrosion control . Development of new wear test methods and wear test methodologies . Wear of materials for biomedical applications . Wear of non-equilibrium materials: from atomic dimensions to the micro-scale . Wear of hard and superhard materials . Wear of materials in the earthmoving, minerals processing and mining industries

Download or read book Characterization and Properties of Ultra high Molecular Weight Polyethylene written by Ray A. Gsell and published by ASTM International. This book was released on 1998 with total page 139 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of a November 1996 symposium held in New Orleans, Louisiana, providing a forum for presentations and discussions of issues critical to the understanding of ultra-high molecular weight polyethylene (UHMWPE) as used in medical and surgical devices. Eleven papers are grouped in three sectio

Download or read book Effect of Microstructure on the Mechanical Properties of Porous Solids written by Oleg Prokopiev and published by . This book was released on 2006 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt: The connections between microstructure and elastic properties of porous/microcracked materials were investigated on an example of sintered hydroxyapatite and Fontainebleau sandstone, and methods of calculation of the effective elastic constants of the materials with irregularly shaped porous space are discussed. It is shown that isolated pores of irregular shapes may be approximated, with good accuracy, by the spheroidal ones. The procedure of evaluation of the average aspect ratio from the photomicrograph is described. Several commonly used approximate schemes are applied to predict effective Young's and shear moduli of a material with spheroidal pores. The comparisons of these predictions with the experimentally measured elastic constants for completely sintered hydroxyapatite and Fontainebleau sandstone exhibit reasonably good agreement. The microstructural information (average shapes of pores) required for adequate modeling of the isotropic elastic properties is identified. It is shown that, if this information is utilized, the usual effective media schemes provide satisfactory predictions of the effective elastic properties. An attempt was made to recover the information about evolution of microstructure from the experimentally measured elastic moduli.

Download or read book Modeling of Chemical Wear written by A. Sethuramiah and published by Elsevier. This book was released on 2015-10-19 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling of Chemical Wear is a one-stop resource for students, researchers and professionals seeking quick and effective tribological evaluations of environmentally friendly and energy efficient products.This book considers optimizing additive combinations by proper methodology, bridging the gap between theory and practice. It defines effective approaches to evaluate antiwear chemical additives commonly used in industry, enhancing the mapping ability of their performance to reduce the extent of full scale evaluations. Provides full coverage of tribology in four concise chapters, including lubricants and additives and up-and-coming nano-level tribology Offers effective empirical modelling of chemical wear, along with computer programs relevant to industry standards to help you improve your test methods Outlines effective methodology for optimization of additive packages, relevant to the present search for eco-friendly combinations

Download or read book Advances in Manufacturing II written by Bartosz Gapiński and published by Springer. This book was released on 2019-05-02 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a variety of topics related to machine manufacturing and concerning machine design, product assembly, technological aspects of production, mechatronics and production maintenance. Based on papers presented at the 6th International Scientific-Technical Conference MANUFACTURING 2019, held in Poznan, Poland on May 19-22, 2019, the different chapters reports on cutting-edge issues in constructing machine parts, mechatronic solutions and modern drives. They include new ideas and technologies for machine cutting and precise processing. Chipless technologies, such as founding, plastic forming, non-metal construction materials and composites, and additive techniques alike, are also analyzed and thoroughly discussed. All in all, the book reports on significant scientific contributions in modern manufacturing, offering a timely guide for researchers and professionals developing and/or using mechanical engineering technologies that have become indispensable for modern manufacturing.

Download or read book Investigation of Microstructure and Mechanical Properties at Low and High Temperatures of WC 6 Wt Co written by and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Characterization of Polymeric Biomaterials written by Maria Cristina Tanzi and published by Woodhead Publishing. This book was released on 2017-06-20 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: Characterization of Polymeric Biomaterials presents a comprehensive introduction on the topic before discussing the morphology and surface characterization of biomedical polymers. The structural, mechanical, and biological characterization is described in detail, followed by invaluable case studies of polymer biomaterial implants. With comprehensive coverage of both theoretical and experimental information, this title will provide scientists with an essential guide on the topic of these materials which are regularly used for clinical applications, such as implants and drug delivery devices. However, a range of novel polymers and the development and modification of existing medical polymers means that there is an ongoing need to satisfy particular design requirements. This book explains the critical and fundamentals methods to characterize polymer materials for biomedical applications. Presents a self-contained reference on the characterization of polymeric biomaterials Provides comprehensive information on how to characterize biomedical polymers in order to improve design and synthesis Includes useful case studies that demonstrate the characterization of biomaterial implants

Download or read book Multi Functional Materials and Structures II written by Yan Sheng Yin and published by Trans Tech Publications Ltd. This book was released on 2009-08-31 with total page 2374 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the rapid development of science and technology, the functionalization of structural materials, and the structurization of functional materials are attracting increasing attention in the scientific and engineering fields. The development of multi-functional materials and structures (MFMS), at the micro- and nano-scale levels, has grown rapidly due to the requirement of increasing safety margins for all infrastructure, biomedical and engineering elements. Multi-functional material systems are capable of performing multiple “primary” functions, simultaneously or sequentially in time, and are specially designed to improve system performance via a reduction in the redundancy between sub-system materials and functions.

Download or read book Applications of Texture Analysis written by A. D. Rollett and published by John Wiley & Sons. This book was released on 2008-12-05 with total page 838 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains papers presented at The 15th International Conference on the Texture of Materials from June 1-5th, 2008 in Pittsburgh, PA. Chapters include: Thin Films Texture at Non-Ambient Conditions Novel Texture Measurement Techniques Including 3D Complex Oxides Interface Textures Recrystallization Texture Biomaterials Texture Effects on Damage Accumulation Digital Microstructures View information on Materials Processing and Texture: Ceramic Transactions, Volume 200.

Download or read book Transactions of the Annual Meeting of the Orthopaedic Research Society written by Orthopaedic Research Society. Meeting and published by . This book was released on 2000 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: Consists of the transactions of the 22nd- annual meeting of the society.