Download or read book Investigating the Adhesive Strength and Morphology of Polyelectrolyte Multilayers by Atomic Force Microscopy written by Sena Ada and published by . This book was released on 2008 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract: Polyelectrolyte multilayer (PEM) thin films prepared via the Layer-by-Layer (LbL) deposition technique are of special interest in this research. The purpose of this study is to replace current mechanical closure systems, based on hook-and-loop type fasteners (i.e. Velcro), with PEM thin film systems. The technique is simple, cheap, versatile and environmental friendly; as a consequence a variety of thin films can be easily fabricated. By proposing PEMs as non-mechanical and nanoscopic molecular closures, we aim to obtain hermetic sealing, good adhesive strength, and peel off ease. Atomic force microscopy (AFM) and colloidal probe techniques were used to characterize the morphology, roughness and adhesive properties of PEMs. AFM measurements were conducted in air, necessarily requiring careful control of ambient humidity. PEMs were formed by consecutive deposition of polyanions and polycations on a charged polyethylene terephthalate (PET) solid surface, the result of which was stable nanostructured films. By systemically varying the parameters of PEM build-up process: different combinations of polyelectrolytes, different numbers of bilayers (polyanion/polycation pairs), and miscellaneous types and concentrations of salts (NaCl, NaBr and NaF salts at 0.5 M and 1.0 M concentrations), the adhesion and morphology of PEMs were thoroughly investigated. The PEM thin films specifically investigated include poly(ethyleneimine) (PEI), poly(styrene sulfonate) (PSS), poly(allylamine hydrochloride) (PAH), poly(acrylic acid) (PAA), and poly(diallydimethylammonium chloride) (PDADMAC). Silica colloidal probes were utilized in the investigation, some of which were functionalized with COOH and/or coated with PEI-PSS. Silica colloidal probes were used in order to quantify interaction forces on the PEMs. A functionalized silica colloidal probe (a probe with COOH surface chemistry) and a silica colloidal probe coated with PEI-PSS were used to simulate PEM-PEM interactions. The results suggest that adhesion in the PEMs depend on the number of layers, the salt concentration and the salt type used during the build-up process, the environmental conditions where the adhesion force measurements were made, and the choice of probe.
Download or read book On the Adhesive Properties of Polyelectrolyte Multilayers written by Erik Johansson and published by . This book was released on 2008 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The formation of polyelectrolyte multilayers (PEMs) by the consecutive treatment of a charged substrate with cationic and anionic polyelectrlytes is an effective method for assigning new or improved surface properties to a substrate. The potential of PEMs for increasing the adhesive interaction between substrates was explored in this thesis in order to determine the molecular mechanisms responsible for the improvement in adhesion. In addition, the objective was to investigate whether there is a relationship between the structural and viscoelastic porperties of the multilayers and their adhesive porperties. PEMs formed from polyallylamine hydrochloride (PAH) and polyacrylic acid (PAA) were studied using atomic force microscopy (AFM) and the surface force apparatus (SFA). AFM colloidal probe pull-off force measurements, conducted under wet conditions, showed that the adhesive interactions werre higher when PAH was absorbed in the outermost layer than when PAA capped the PEM. The results also show that the adhesion increased with time in contact at maximum load. A low molecular weight combination of polyelectrolytes resulted in higher pull-off forces than did a high molecular weight combinaison. These results suggest that the development of a strong adhesive joint is very dependent on the mobility of the polyelectrolytes and interdiffusion across the interface. SFA measurements were conducted under dry conditions, at 100%RH, and under wet conditions. Under dry conditions, the adhesive forces between two mica sheets was decreased after they were covered by PEMs, indicating that the adhesive interaction was dominated by the thermodynamic work od adhesion between the two surfaces. Measurements using a combinaison of stagnation point adsorption reflectometry (SPAR) and quartz crystal microbalance with dissipation( QCM-D) show that PEMs can be successfully constructed from cationic starch and anionic starch at electrolyte conentrations of 1 and 10 mM NaCl. (...).
Download or read book Eucalyptus Kraft Pulp Refining written by Vail Manfredi and published by Springer Nature. This book was released on with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dissertation Abstracts International written by and published by . This book was released on 2004 with total page 858 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Multilayer Thin Films written by Gero Decher and published by John Wiley & Sons. This book was released on 2012-06-11 with total page 1157 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second, comprehensive edition of the pioneering book in this fi eld has been completely revised and extended, now stretching to two volumes. The result is a comprehensive summary of layer-by-layer assembled, truly hybrid nanomaterials and thin fi lms, covering organic, inorganic, colloidal, macromolecular, and biological components, as well as the assembly of nanoscale fi lms derived from them on surfaces. These two volumes are essential for anyone working in the field, as well as scientists and researchers active in materials development, who needs the key knowledge provided herein for linking the field of molecular self-assembly with the bio- and materials sciences.
Download or read book Polyurethane Elastomers written by C. Hepburn and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this monograph has been to distil into a single volume, in an easily read and assimilated format, the essentials of this often complex technology such that it is usable by all technical and semi-technical people who wish to become their own polyurethane and polyurethane elastomer expert.
Download or read book Nanofiltration 2 Volume Set written by Andrea Iris Schäfer and published by John Wiley & Sons. This book was released on 2021-08-09 with total page 1267 pages. Available in PDF, EPUB and Kindle. Book excerpt: An updated guide to the growing field of nanofiltration including fundamental principles, important industrial applications as well as novel materials With contributions from an international panel of experts, the revised second edition of Nanofiltration contains a comprehensive overview of this growing field. The book covers the basic principles of nanofiltration including the design and characterizations of nanofiltration membranes. The expert contributors highlight the broad ranges of industrial applications including water treatment, food, pulp and paper, and textiles. The book explores photocatalytic nanofiltration reactors, organic solvent nanofiltration, as well as nanofiltration in metal and acid recovery. In addition, information on the most recent developments in the field are examined including nanofiltration retentate treatment and renewable energy-powered nanofiltration. The authors also consider the future of nanofiltration materials such as carbon- as well as polymer-based materials. This important book: Explores the fast growing field of the membrane process of nanofiltration Examines the rapidly expanding industrial sector's use of membranes for water purification Covers the most important industrial applications with a strong focus on water treatment Contains a section on new membrane materials, including carbon-based and polymer-based materials, as well as information on artificial ion and water channels as biomimetic membranes Written for scientists and engineers in the fields of chemistry, environment, food and materials, the second edition of Nanofiltration provides a comprehensive overview of the field, outlines the principles of the technology, explores the industrial applications, and discusses new materials.
Download or read book Physics of Cancer written by Claudia Mierke and published by Iph001. This book was released on 2018-10-24 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revised second edition is improved linguistically with multiple increases of the number of figures and the inclusion of several novel chapters such as actin filaments during matrix invasion, microtubuli during migration and matrix invasion, nuclear deformability during migration and matrix invasion, and the active role of the tumor stroma in regulating cell invasion.
Download or read book Biomimetic Polymers written by C.G. Gebelein and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: The term biomimetic is comparatively new on the chemical scene, but the concept has been utilized by chemists for many years. Furthermore, the basic idea of making a synthetic material that can imitate the func tions of natural materials probably could be traced back into antiquity. From the dawn of creation, people have probably attempted to duplicate or modify the activities of the natural world. (One can even find allusions to these attempts in the Bible; e. g. , Genesis 30. ) The term "mimetic" means to imitate or mimic. The word "mimic" means to copy closely, or to imitate accurately. Biomimetic, which has not yet entered most dictionaries, means to imitate or mimic some specific bio logical function. Usually, the objective of biomimetics is to form some useful material without the need of utilizing living systems. In a simi lar manner, the term biomimetic polymers means creating synthetic poly mers which imitate the activity of natural bioactive polymers. This is a major advance in polymer chemistry because the natural bioactive polymers are the basis of life itself. Thus, biomimetic polymers imitate the life process in many ways. This present volume delineates some of the recent progress being made in this vast field of biomimetic polymers. Chemists have been making biomimetic polymers for more than fifty years, although this term wasn't used in the early investigations.
Download or read book Polyelectrolytes written by Visakh P. M. and published by Springer. This book was released on 2014-09-03 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a valuable reference source to graduate and post graduate students, engineering students, research scholars polymer engineers from industry. The book provides the reader with current developments of theoretical models describing the thermodynamics polyelectrolytes as well as experimental findings. A particular emphasis is put on the rheological description of polyelectrolyte solutions and hydrogels.
Download or read book Coatings for Biomedical Applications written by Mike Driver and published by Elsevier. This book was released on 2012-02-22 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: The biomaterials sector is rapidly expanding and significant advances have been made in the technology of biomedical coatings and materials, which provide a means to improve the wear of joints, change the biological interaction between implant and host and combine the properties of various materials to improve device performance. Coatings for biomedical applications provides an extensive review of coating types and surface modifications for biomedical applications.The first part of the book explores a range of coating types and their biomedical applications. Chapters look at hydrophilic, mineral and pyrolytic carbon coatings in and ex vivo orthopaedic applications and finally at surface modification and preparation techniques. Part two presents case studies of orthopaedic and ophthalmic coatings, and biomedical applications including vascular stents, cardiopulomonary by-pass equipment and ventricular assist devices.With its clear structure and comprehensive review of research, Coatings for biomedical applications is a valuable resource to researchers, scientists and engineers in the biomedical industry. It will also benefit anyone studying or working within the biomedical sector, particularly those specialising in biomedical coatings. - Provides an extensive review of coating types and surface modifications for biomedical applications - Chapters look at hydrophilic coatings for biomedical applications in and ex vivo, mineral coatings for orthopaedic applications, pyrolytic carbon coating and other commonly-used biomedical coatings - Presents case studies of orthopaedic and ophthalmic coatings, and biomedical applications including vascular stents, cardiopulomonary by-pass equipment and ventricular assist devices
Download or read book Advanced Tribology written by Jianbin Luo and published by Springer Science & Business Media. This book was released on 2010-07-16 with total page 1040 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Advanced Tribology" is the proceedings of the 5th China International Symposium on Tribology (held every four years) and the 1st International Tribology Symposium of IFToMM, held in Beijing 24th-27th September 2008. It contains seven parts: lubrication; friction and wear; micro/nano-tribology; tribology of coatings, surface and interface; biotribology; tribo-chemistry; industry tribology. The book reflects the recent progress in the fields such as lubrication, friction and wear, coatings, and precision manufacture etc. in the world. The book is intended for researchers, engineers and graduate students in the field of tribology, lubrication, mechanical production and industrial design. The editors Jianbin Luo, Yonggang Meng, Tianmin Shao and Qian Zhao are all the professors at the State Key Lab of Tribology, Tsinghua University, Beijing.
Download or read book Polymer Morphology written by Qipeng Guo and published by John Wiley & Sons. This book was released on 2016-05-16 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: With a focus on structure-property relationships, this book describes how polymer morphology affects properties and how scientists can modify them. The book covers structure development, theory, simulation, and processing; and discusses a broad range of techniques and methods. • Provides an up-to-date, comprehensive introduction to the principles and practices of polymer morphology • Illustrates major structure types, such as semicrystalline morphology, surface-induced polymer crystallization, phase separation, self-assembly, deformation, and surface topography • Covers a variety of polymers, such as homopolymers, block copolymers, polymer thin films, polymer blends, and polymer nanocomposites • Discusses a broad range of advanced and novel techniques and methods, like x-ray diffraction, thermal analysis, and electron microscopy and their applications in the morphology of polymer materials
Download or read book Carbon Nanotube Polymer Composites written by Dimitrios Tasis and published by Royal Society of Chemistry. This book was released on 2015-11-09 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemically-modified carbon nanotubes (CNTs) exhibit a wide range of physical and chemical properties which makes them an attractive starting material for the preparation of super-strong and highly-conductive fibres and films. Much information is available across the primary literature, making it difficult to obtain an overall picture of the state-of-the-art. This volume brings together some of the leading researchers in the field from across the globe to present the potential these materials have, not only in developing and characterising novel materials but also the devices which can be fabricated from them. Topics featured in the book include Raman characterisation, industrial polymer materials, actuators and sensors and polymer reinforcement, with chapters prepared by highly-cited authors from across the globe. A valuable handbook for any academic or industrial laboratory, this book will appeal to newcomers to the field and established researchers alike.
Download or read book Calcium Orthophosphates written by Sergey V. Dorozhkin and published by CRC Press. This book was released on 2012-06-04 with total page 863 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to a great chemical similarity with the biological calcified tissues, many calcium orthophosphates possess remarkable biocompatibility and bioactivity. Materials scientists use this property extensively to construct artificial bone grafts that are either entirely made of or only surface-coated with the biologically relevant calcium orthophospha
Download or read book Thin Films and Coatings in Biology written by Soroush Nazarpour and published by Springer Science & Business Media. This book was released on 2013-08-15 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: The surface of materials is routinely exposed to various environmental influences. Surface modification presents a technological challenge for material scientists, physicists, and engineers, particularly when those surfaces are subjected to function within human body environment. This book provides a comprehensive coverage of the major issues and topics dealing with interaction of soft living matter with the surface of implants. Fundamental scientific concepts are embedded through experimental data and a broad range of case studies. First chapters cover the basics on biocompatibility of many different thin films of metals, alloys, ceramics, hydrogels, and polymers, following with case studies dealing with orthopedic and dental coatings. Next, a novel and low-cost coating deposition technique capable of production of several types of nanostructures is introduced through simple calculations and several illustrations. Moreover, chapter 6 and 7 present important topics on surface treatment of polymers, which is a subject that has seen many developments over the past decade. The last chapters target mainly the applications of coatings in biology such as in bio-sensing, neuroscience, and cancer detection. With several illustrations, micrographs, and case studies along with suitable references in each chapter, this book will be essential for graduate students and researchers in the multidisciplinary field of bio-coatings.
Download or read book Electrospun Nanofibers written by Mehdi Afshari and published by Woodhead Publishing. This book was released on 2016-09-13 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrospun Nanofibers covers advances in the electrospinning process including characterization, testing and modeling of electrospun nanofibers, and electrospinning for particular fiber types and applications. Electrospun Nanofibers offers systematic and comprehensive coverage for academic researchers, industry professionals, and postgraduate students working in the field of fiber science. Electrospinning is the most commercially successful process for the production of nanofibers and rising demand is driving research and development in this field. Rapid progress is being made both in terms of the electrospinning process and in the production of nanofibers with superior chemical and physical properties. Electrospinning is becoming more efficient and more specialized in order to produce particular fiber types such as bicomponent and composite fibers, patterned and 3D nanofibers, carbon nanofibers and nanotubes, and nanofibers derived from chitosan. - Provides systematic and comprehensive coverage of the manufacture, properties, and applications of nanofibers - Covers recent developments in nanofibers materials including electrospinning of bicomponent, chitosan, carbon, and conductive fibers - Brings together expertise from academia and industry to provide comprehensive, up-to-date information on nanofiber research and development - Offers systematic and comprehensive coverage for academic researchers, industry professionals, and postgraduate students working in the field of fiber science
