Download or read book Analogue and Numerical Modelling of Crustal scale Processes written by Susanne Janita Henriët Buiter and published by Geological Society of London. This book was released on 2006 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: The crust of the Earth records the deformational processes of the inner Earth and the influence of the overlying atmosphere. The state of the Earth's crust at any time is therefore the result of internal and external processes, which occur on different time and spatial scales. In recent years important steps forward in the understanding of such complex processes have been made by integrating theory and observations with experimental and computer models. This volume presents state-of-the-art analogue and numerical models of processes that alter the Earth's crust. It shows the application of models in a broad range of geological problems with careful documentation of the modelling approach used. This volume contains contributions on analogue and numerical sandbox models, models of orogenic processes, models of sedimentary basins, models of surface processes and deformation, and models of faults and fluid flow.
Download or read book Active Fold and Thrust Belts From Present Day Deformation to Structural Architecture and Modelling written by Gang Rao and published by Frontiers Media SA. This book was released on 2022-02-16 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Physical Modelling in Geotechnics Volume 1 written by Andrew McNamara and published by CRC Press. This book was released on 2018-07-11 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physical Modelling in Geotechnics collects more than 1500 pages of peer-reviewed papers written by researchers from over 30 countries, and presented at the 9th International Conference on Physical Modelling in Geotechnics 2018 (City, University of London, UK 17-20 July 2018). The ICPMG series has grown such that two volumes of proceedings were required to publish all contributions. The books represent a substantial body of work in four years. Physical Modelling in Geotechnics contains 230 papers, including eight keynote and themed lectures representing the state-of-the-art in physical modelling research in aspects as diverse as fundamental modelling including sensors, imaging, modelling techniques and scaling, onshore and offshore foundations, dams and embankments, retaining walls and deep excavations, ground improvement and environmental engineering, tunnels and geohazards including significant contributions in the area of seismic engineering. ISSMGE TC104 have identified areas for special attention including education in physical modelling and the promotion of physical modelling to industry. With this in mind there is a special themed paper on education, focusing on both undergraduate and postgraduate teaching as well as practicing geotechnical engineers. Physical modelling has entered a new era with the advent of exciting work on real time interfaces between physical and numerical modelling and the growth of facilities and expertise that enable development of so called ‘megafuges’ of 1000gtonne capacity or more; capable of modelling the largest and most complex of geotechnical challenges. Physical Modelling in Geotechnics will be of interest to professionals, engineers and academics interested or involved in geotechnics, geotechnical engineering and related areas. The 9th International Conference on Physical Modelling in Geotechnics was organised by the Multi Scale Geotechnical Engineering Research Centre at City, University of London under the auspices of Technical Committee 104 of the International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE). City, University of London, are pleased to host the prestigious international conference for the first time having initiated and hosted the first regional conference, Eurofuge, ten years ago in 2008. Quadrennial regional conferences in both Europe and Asia are now well established events giving doctoral researchers, in particular, the opportunity to attend an international conference in this rapidly evolving specialist area. This is volume 1 of a 2-volume set.
Download or read book Extensional Tectonics Faulting and related processes written by Robert E. Holdsworth and published by Geological Society of London. This book was released on 2002 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Flow Processes in Faults and Shear Zones written by G. Ian Alsop and published by Geological Society of London. This book was released on 2004 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Faults and their deeper level equivalents, shear zones, are localized regions of intense deformation within the Earth. They are recognized at all scales from micro to plate boundary, and are important examples of the nature of heterogeneous deformation in natural rocks. Faults and shear zones are significant as they profoundly influence the location, architecture and evolution of a broad range of geological phenomenao The topography and bathymetry of the Earth's surface is marked by mountain belts and sedimentary basins that are controlled by faults and shear zoneso In addition, faults and shear zones control fluid migration and transport including hydrothermal and hydrocarbon systems. Once faults and shear zones are established, they are often long-lived features prone to multiple reactivation over very large time-scales. This collection of papers addresses lithospheric deformation and the rheology of shear zones, together with processes of partitioning and the unravelling of fault and shear zone histories.
Download or read book XAFS for Everyone written by Scott Calvin and published by CRC Press. This book was released on 2013-05-20 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: XAFS for Everyone provides a practical, thorough guide to x-ray absorption fine-structure (XAFS) spectroscopy for both novices and seasoned practitioners from a range of disciplines. The text is enhanced with more than 200 figures as well as cartoon characters who offer informative commentary on the different approaches used in XAFS spectroscopy. The book covers sample preparation, data reduction, tips and tricks for data collection, fingerprinting, linear combination analysis, principal component analysis, and modeling using theoretical standards. It describes both near-edge (XANES) and extended (EXAFS) applications in detail. Examples throughout the text are drawn from diverse areas, including materials science, environmental science, structural biology, catalysis, nanoscience, chemistry, art, and archaeology. In addition, five case studies from the literature demonstrate the use of XAFS principles and analysis in practice. The text includes derivations and sample calculations to foster a deeper comprehension of the results. Whether you are encountering this technique for the first time or looking to hone your craft, this innovative and engaging book gives you insight on implementing XAFS spectroscopy and interpreting XAFS experiments and results. It helps you understand real-world trade-offs and the reasons behind common rules of thumb.
Download or read book Thrust Fault Related Folding written by Ken McClay and published by AAPG. This book was released on 2011-10-01 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Volcanism and Tectonism Across the Inner Solar System written by T. Platz and published by Geological Society of London. This book was released on 2015-01-05 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volcanism and tectonism are the dominant endogenic means by which planetary surfaces change. This book aims to encompass the broad range in character of volcanism, tectonism, faulting and associated interactions observed on planetary bodies across the inner solar system - a region that includes Mercury, Venus, Earth, the Moon, Mars and asteroids. The diversity and breadth of landforms produced by volcanic and tectonic processes is enormous, and varies across the inner solar system bodies. As a result, the selection of prevailing landforms and their underlying formational processes that are described and highlighted in this volume are but a primer to the expansive field of planetary volcanism and tectonism. This Special Publication features 22 research articles about volcanic and tectonic processes manifest across the inner solar system.
Download or read book Plate Boundaries and Natural Hazards written by Joao C. Duarte and published by John Wiley & Sons. This book was released on 2016-07-13 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: The beginning of the new millennium has been particularly devastating in terms of natural disasters associated with tectonic plate boundaries, such as earthquakes in Sumatra, Chile, Japan, Tahiti, and Nepal; the Indian Ocean and the Pacific Ocean tsunamis; and volcanoes in Indonesia, Chile, Iceland that have produced large quantities of ash causing major disruption to aviation. In total, half a million people were killed by such natural disasters. These recurring events have increased our awareness of the destructive power of natural hazards and the major risks associated with them. While we have come a long way in the search for understanding such natural phenomena, and although our knowledge of Earth dynamics and plate tectonics has improved enormously, there are still fundamental uncertainties in our understanding of natural hazards. Increased understanding is crucial to improve our capacity for hazard prediction and mitigation. Volume highlights include: Main concepts associated with tectonic plate boundaries Novel studies on boundary-related natural hazards Fundamental concepts that improve hazard prediction and mitigation Plate Boundaries and Natural Hazards will be a valuable resource for scientists and students in the fields of geophysics, geochemistry, plate tectonics, natural hazards, and climate science. Read an interview with the editors to find out more: https://eos.org/editors-vox/plate-boundaries-and-natural-hazards
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Petroleum Abstracts written by and published by . This book was released on 1997 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Intraplate Strike slip Deformation Belts written by Fabrizio Storti and published by Geological Society of London. This book was released on 2003 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Treatise on Geophysics written by and published by Elsevier. This book was released on 2015-04-17 with total page 5604 pages. Available in PDF, EPUB and Kindle. Book excerpt: Treatise on Geophysics, Second Edition, is a comprehensive and in-depth study of the physics of the Earth beyond what any geophysics text has provided previously. Thoroughly revised and updated, it provides fundamental and state-of-the-art discussion of all aspects of geophysics. A highlight of the second edition is a new volume on Near Surface Geophysics that discusses the role of geophysics in the exploitation and conservation of natural resources and the assessment of degradation of natural systems by pollution. Additional features include new material in the Planets and Moon, Mantle Dynamics, Core Dynamics, Crustal and Lithosphere Dynamics, Evolution of the Earth, and Geodesy volumes. New material is also presented on the uses of Earth gravity measurements. This title is essential for professionals, researchers, professors, and advanced undergraduate and graduate students in the fields of Geophysics and Earth system science. Comprehensive and detailed coverage of all aspects of geophysics Fundamental and state-of-the-art discussions of all research topics Integration of topics into a coherent whole
Download or read book Andean Structural Styles written by Gonzalo Zamora and published by Elsevier. This book was released on 2022-04-26 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Andean Structural Styles: A Seismic Atlas is a comprehensive reference illustrating the variability in structural styles and hydrocarbon traps that exist in the Andean chain. The Andean chain, stretching over more than 5,000 km (3,000 mi) from Venezuela to Argentina, contains a large number of sedimentary basins which have developed in a wide range of tectonic settings. Some of these basins are highly mature, with hydrocarbon production from Paleozoic, Mesozoic, and Cenozoic sedimentary sequences, while others are still underexplored. Andean Structural Styles: A Seismic Atlas covers topics including fold types, thrust faults, triangle zones, inversion structures, synorogenic deposits, and growth stratal geometries. These topics are illustrated by thirty-two seismic examples interpreted and uninterpreted, covering most of the Andean basins, and five chapters reviewing the structural styles of the Andes, the complexity of processing seismic in these settings, how analogue models help in the interpretation, and several outcrop analogues. This reference is invaluable to both hydrocarbon exploration of the Andes and researchers and students in the fields of exploration geology and structural geology. Also, those teaching structural geology and seismic interpretation will find a valuable resource with lots of uninterpreted seismic examples that can be used in their lectures. - Includes a vast collection of high-quality, color images - Features case studies covering the entirety of the Andes Mountain chain - Presents high-quality seismic data that was previously only available to oil companies
Download or read book Tectonic and Stratigraphic Evolution of Zagros and Makran During the Mesozoic Cenozoic written by Pascale Leturmy and published by Geological Society of London. This book was released on 2010 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Zagros fold-thrust belt (ZFTB) extends from Turkey to the Hormuz Strait, resulting from the collision of the Arabian and Eurasian plates during Cenozoic times, and separates the Arabian platform from the large plateaux of central Iran. To the east a pronounced syntaxis marks the transition between the Zagros collision belt and the Makran accretionary wedge. In the ZFTB, the Proterozoic to Recent stratigraphic succession pile is involved in huge folds, and offers the opportunity to study the stratigraphic and tectonic evolution of the Palaeo-Tethyan margin. Few recent data were widely available on the southern Tethys margin preserved in the Zagros Mountains. The Middle East Basins Evolution (MEBE) program was an excellent opportunity to go back to the field and to collect new data to better constrain the evolution of this margin. In this volume the structure of the Zagros Mountains is explored through different scales and using different methodologies.
Download or read book Fundamental Controls on Fluid Flow in Carbonates written by S.M. Agar and published by Geological Society of London. This book was released on 2015-02-02 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume highlights key challenges for fluid-flow prediction in carbonate reservoirs, the approaches currently employed to address these challenges and developments in fundamental science and technology. The papers span methods and case studies that highlight workflows and emerging technologies in the fields of geology, geophysics, petrophysics, reservoir modelling and computer science. Topics include: detailed pore-scale studies that explore fundamental processes and applications of imaging and flow modelling at the pore scale; case studies of diagenetic processes with complementary perspectives from reactive transport modelling; novel methods for rock typing; petrophysical studies that investigate the impact of diagenesis and fault-rock properties on acoustic signatures; mechanical modelling and seismic imaging of faults in carbonate rocks; modelling geological influences on seismic anisotropy; novel approaches to geological modelling; methods to represent key geological details in reservoir simulations and advances in computer visualization, analytics and interactions for geoscience and engineering.
Download or read book Spring Meeting written by American Geophysical Union. Meeting and published by . This book was released on 1999 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt:
