Download or read book Introduction to Wood and Natural Fiber Composites written by Douglas D. Stokke and published by John Wiley & Sons. This book was released on 2013-10-21 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past two decades, there has been a shift in research and industrial practice, and products traditionally manufactured primarily from wood are increasingly combined with other nonwood materials of either natural or synthetic origin. Wood and other plant-based fiber is routinely combined with adhesives, polymers, and other "ingredients" to produce composite materials. Introduction to Wood and Natural Fiber Composites draws together widely scattered information concerning fundamental concepts and technical applications, essential to the manufacture of wood and natural fiber composites. The topics addressed include basic information on the chemical and physical composition of wood and other lignocellulosic materials, the behavior of these materials under thermocompression processes, fundamentals of adhesion, specific adhesive systems used to manufacture composite materials, and an overview of the industrial technologies used to manufacture major product categories. The book concludes with a chapter on the burgeoning field of natural fiber-plastic composites. Introduction to Wood and Natural Fiber Composites is a valuable resource for upper-level undergraduate students and graduate students studying forest products and wood science, as well as for practicing professionals working in operational areas of wood- and natural-fiber processing. For more information on the Wiley Series in Renewable Resources, visit www.wiley.com/go/rrs Topics covered include: Overview of lignocellulosic material, their chemical and physical composition Consolidation behavior of wood and fiber in response to heat and pressure Fundamentals of adhesion Adhesives used to bond wood and lignocellulosic composites Manufacturing technology of major product types Fiber/plastic composites

Download or read book Advanced High Strength Natural Fibre Composites in Construction written by Mizi Fan and published by Woodhead Publishing. This book was released on 2016-10-04 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced High Strength Natural Fibre Composites in Construction provides the basic framework and knowledge required for the efficient and sustainable use of natural fiber composites as a structural and building material, along with information on the ongoing efforts to improve the efficiency of use and competitiveness of these composites. Areas of particular interest include understanding the nature and behavior of raw materials and their functional contributions to the advanced architectures of high strength composites (Part 1), discussing both traditional and novel manufacturing technologies for various advanced natural fiber construction materials (Part 2), examining the parameters and performance of the composites (Part 3), and finally commenting on the associated codes, standards, and sustainable development of advanced high strength natural fiber composites for construction. This exposition will be based on well understood environmental science as it applies to construction (Part 4). The book is aimed at academics, research scholars, and engineers, and will serve as a most valuable text or reference book that challenges undergraduate and postgraduate students to think beyond standard practices when designing and creating novel construction materials. Presents the first comprehensive review on the efficient and sustainable use of natural fiber composites in construction and building materials Contains detailed information on the structure, chemical composition, and physical and mechanical properties of natural fibers Covers both traditional and novel manufacturing technologies for high strength natural fiber composites Includes material parameters and performance in use, as well as associated codes, standards, and applied case studies Presents contributions from leading international experts in the field

Download or read book Properties and Performance of Natural Fibre Composites written by Kim Pickering and published by Elsevier. This book was released on 2008-06-23 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concern about global warming has led to renewed interest in the more sustainable use of natural fibres in composite materials. This important book reviews the wealth of recent research into improving the mechanical properties of natural-fibre thermoplastic composites so that they can be more widely used.The first part of the book provides an overview of the main types of natural fibres used in composites, how they are processed and, in particular, the way the fibre-matrix interface can be engineered to improve performance. Part two discusses the increasing use of natural-fibre composites in such areas as automotive and structural engineering, packaging and the energy sector. The final part of the book discusses ways of assessing the mechanical performance of natural-fibre composites.With its distinguished editor and team of contributors, Properties and performance of natural-fibre composites is a valuable reference for all those using these important materials in such areas as automotive and structural engineering. - Provides an overview of the types of natural fibres used in composites - Discusses fibre-matrix interface and how it can be engineered to improve performance - Examines the increasing use of natural-fibre composites in automotive and structural engineering and the packaging and energy sector

Download or read book Natural Fibre Composites written by Alma THULE and published by Woodhead Publishing. This book was released on 2014-02-13 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of natural fibres as reinforcements in composites has grown in importance in recent years. Natural Fibre Composites summarises the wealth of significant recent research in this area. Chapters in part one introduce and explore the structure, properties, processing, and applications of natural fibre reinforcements, including those made from wood and cellulosic fibres. Part two describes and illustrates the processing of natural fibre composites. Chapters discuss ethical practices in the processing of green composites, manufacturing methods and compression and injection molding techniques for natural fibre composites, and thermoset matrix natural fibre-reinforced composites. Part three highlights and interprets the testing and properties of natural fibre composites including, non-destructive and high strain rate testing. The performance of natural fibre composites is examined under dynamic loading, the response of natural fibre composites to impact damage is appraised, and the response of natural fibre composites in a marine environment is assessed. Natural Fibre Composites is a technical guide for professionals requiring an understanding of natural fibre composite materials. It offers reviews, applications and evaluations of the subject for researchers and engineers. - Introduces and explores the structure, properties, processing, and applications of natural fibre reinforcements, including those made from wood and cellulosic fibres - Highlights and interprets the testing and properties of natural fibre composites, including non-destructive and high strain rate testing - Examines performance of natural fibre composites under dynamic loading, the response of natural fibre composites to impact damage, and the response of natural fibre composites in a marine environment

Download or read book Natural Fiber Composites written by R.D.S.G. Campilho and published by CRC Press. This book was released on 2015-11-05 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings value to anyone working with or designing natural fiber composite structures. It helps readers understand the value these materials can add to projects, how to choose the best materials and treatments, how to safely design and fabricate products made of natural fiber composites, and how to test them for safety. It covers the characterization of natural fibers, matrices and respective composites, and how to enhance their performance and processing as well as testing and degradation issues.

Download or read book Wood Polymer Composites written by K O Niska and published by Elsevier. This book was released on 2008-05-29 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wood-polymer composites (WPC) are materials in which wood is impregnated with monomers that are then polymerised in the wood to tailor the material for special applications. The resulting properties of these materials, from lightness and enhanced mechanical properties to greater sustainability, has meant a growing number of applications in such areas as building, construction and automotive engineering. This important book reviews the manufacture of wood-polymer composites, how their properties can be assessed and improved and their range of uses.After an introductory chapter, the book reviews key aspects of manufacture, including raw materials, manufacturing technologies and interactions between wood and synthetic polymers. Building on this foundation, the following group of chapters discusses mechanical and other properties such as durability, creep behaviour and processing performance. The book concludes by looking at orientated wood-polymer composites, wood-polymer composite foams, at ways of assessing performance and at the range of current and future applications.With its distinguished editors and international team of contributors, Wood-polymer composites is a valuable reference for all those using and studying these important materials. - Provides a comprehensive survey of major new developments in wood-polymer composites - Reviews the key aspects of manufacture, including raw materials and manufacturing technologies - Discusses properties such as durability, creep behaviour and processing performance

Download or read book Manufacturing of Natural Fibre Reinforced Polymer Composites written by Mohd Sapuan Salit and published by Springer. This book was released on 2015-09-10 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural fibre composite is an emerging material that has great potential to be used in engineering application. Oil palm, sugar palm, bagasse, coir, banana stem, hemp, jute, sisal, kenaf, roselle, rice husk, betul nut husk and cocoa pod are among the natural fibres reported to be used as reinforcing materials in polymer composites. Natural fibre composites were used in many industries such as automotive, building, furniture, marine and aerospace industries. The advantages of natural fibre composites include low cost, renewable, abundance, light weight, less abrasive and they are suitable to be used in semi or non-structural engineering components. Research on various aspects of natural fibre composites such as characterization, determination of properties and design have been extensively carried out. However, publications that reported on research of manufacture of natural fibre composites are very limited. Specifically, although manufacturing methods of components from natural fibre composites are similar to those of components from conventional fibre composites such as glass, carbon and Kevlar fibres, modification of equipment used for conventional fibre composites may be required. This book fills the gap of knowledge in the field of natural fibre composites for the research community. Among the methods reported that are being used to produce components from natural fibre composites include hand lay-up, compression moulding, filament winding, injection moulding, resin transfer moulding, pultrusion and vacuum bag moulding. This book is also intended to address some research on secondary processing such as machining and laser welding of natural fibre composites. It is hoped that publication of this book will provide the readers new knowledge and understanding on the manufacture of natural fibre composites.

Download or read book Natural Fibers Biopolymers and Biocomposites written by Amar K. Mohanty and published by CRC Press. This book was released on 2005-04-08 with total page 896 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural/Biofiber composites are emerging as a viable alternative to glass fiber composites, particularly in automotive, packaging, building, and consumer product industries, and becoming one of the fastest growing additives for thermoplastics. Natural Fibers, Biopolymers, and Biocomposites provides a clear understanding of the present state

Download or read book Tribology of Natural Fiber Polymer Composites written by and published by Elsevier. This book was released on 2008-10-14 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental concerns are driving demand for bio-degradable materials such as plant-based natural fiber reinforced polymer composites. These composites are fast replacing conventional materials in many applications, especially in automobiles, where tribology (friction, lubrication and wear) is important. This book covers the availability and processing of natural fiber polymer composites and their structural, thermal, mechanical and, in particular, tribological properties. Chapter 1 discusses sources of natural fibers, their extraction and surface modification. It also reviews the thermal, structural, mechanical, spectroscopic and morphological properties of unmodified and chemically modified natural fibers such as sisal, jute, wood, bamboo and cotton together with their potential applications. Chapter 2 gives a brief introduction to the tribology of polymer composites and the role of fiber reinforcement and fillers in modifying their tribological properties. Further chapters discuss the chemical composition, physical structure, mechanical properties and tribological behaviour of polymer composites reinforced with sisal, jute, cotton and bamboo fibers. The tribological behaviour of wood polymer composites (WPCs) is also discussed. Tribology of natural fibre polymer composites is a useful reference guide for engineers, scientific and technical personnel involved in the development of natural fiber composites. In particular it will give an insight into mechanical properties and failure mechanisms in situations where wear, lubrication and friction are a problem. Examines the availability and processing of natural fiber composites and their structural, thermal, mechanical and tribological properties Explores sources of natural fibers, their extraction and surface modification as well as properties of chemically modified natural fibers Provides an overview of the tribology of polymer composites and the role of fiber reinforcement and filters in modifying tribological composites

Download or read book Sustainable Composites written by Anil N. Netravali and published by DEStech Publications, Inc. This book was released on 2014-09-24 with total page 567 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive introduction to composites from natural and recycled biomaterialsCovers fabrication, mechanical analysis and modeling of green compositesNew ideas for cost-effective alternative matrices, fibers and additivesApplications to construction, automotive, and civil engineering An important contribution to the evolution of composites technology, this book is a systematic investigation of how natural biomaterials are used to create cost-effective and environmentally sound composites for commercial use. The book shows how a wide range of plant- and animal-based materials are integrated into the design and fabrication of matrices and reinforcements for polymeric and other types of composites. In addition, a focus is placed on modeling and mechanical analyses of biobased composites, providing valuable data on their performance. Sustainable composites are shown to be viable alternatives for manufactured components in automotive, civil engineering and construction applications.

Download or read book Natural Fibers Plastics and Composites written by Frederick T. Wallenberger and published by Springer Science & Business Media. This book was released on 2011-06-28 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Eco Friendly Adhesives for Wood and Natural Fiber Composites written by Mohammad Jawaid and published by Springer Nature. This book was released on 2021-01-21 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of eco-friendly resins and their composite materials covering their synthesis, sources, structures and properties for different industrial applications to support the ongoing research and development in eco-friendly and renewable commercial products. It provides comparative discussions on the properties of eco-friendly resins with other polymer composites. It is a useful reference on bio-based eco-friendly polymer resins, wood-based composites, natural fibers and biomass materials for the polymer scientists, engineers and material scientists.

Download or read book Natural and Synthetic Fiber Reinforced Composites written by Sanjay Mavinkere Rangappa and published by John Wiley & Sons. This book was released on 2022-04-18 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural and Synthetic Fiber Reinforced Composites Discover a comprehensive exploration of fiber reinforced polymers by an expert team of editors Fiber reinforced polymer (FRP) composites offer several unique properties that make them ideal for use in a wide range of industries, from automotive and aerospace to marine, construction, and co-industrial. In Natural and Synthetic Fiber Reinforced Composites: Synthesis, Properties and Applications, a distinguished team of mechanical engineers delivers a comprehensive overview of fiber reinforced composites. This edited volume includes thorough discussions of glass-, cotton-, and carbon-fiber reinforced materials, as well as the tribological properties and non-structural applications of synthetic fiber composites. Readers will also find practical explorations of the structural evolution, mechanical features, and future possibilities of fiber, textile, and nano-cementitious materials. The physical and chemical properties of cotton fiber-based composites are explored at length, as are the extraordinary mechanical, thermal, electrical, electronic, and field emission properties of carbon nanotubes. This singular book also includes: A thorough discussion of recent advancements in natural fiber reinforced polymer composites, their implications, and the opportunities that arise as a result A comprehensive exploration of the thermal behavior of natural fiber-based composites An insightful review of the literature on sisal fiber with polymer matrices A response to the growing research gap in the existing literature regarding natural fiber-based polymer composites and solutions to address it Perfect for scientists, engineers, professors, and students working in areas involving natural and synthetic reinforced polymers and composites, Natural and Synthetic Fiber Reinforced Composites: Synthesis, Properties and Applications offers a one-of-a-kind resource to help readers understand a critical and rapidly evolving technology.

Download or read book Materials Selection for Natural Fiber Composites written by Faris M. Al-Oqla and published by Woodhead Publishing. This book was released on 2017-06-09 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials Selection for Natural Fiber Composites covers the use of various tools and techniques that can be applied for natural fiber composite selection to expand the sustainable design possibilities and support cleaner production requirements. These techniques include the analytical hierarchy process, knowledge-based system, Java based materials selection system, artificial neural network, Pugh selection method, and the digital logic technique. Information on related topics, such as materials selection and design, natural fiber composites, and materials selection for composites are discussed to provide background information to the main topic. Current developments in selecting the natural fiber composite material system, including the natural fiber composites and their constituents (fibers and polymers) is the main core of the book, with in detailed sections on various technical, environmental and economic issues to enhance both environmental indices and the industrial sustainability theme. Recent developments on the analytical hierarchy process in natural fiber composite materials selection, materials selection for natural fiber composites, and knowledge based system for natural fiber composite materials selection are also discussed. Focuses on materials selection for natural fiber composites Covers potential tools and techniques, such as analytical hierarchy process, knowledge-based systems, Java-based materials selection system, artificial neural network, the Pugh selection method and digital logic technique Contains contributions from leading experts in the field

Download or read book Natural Fiber Reinforced Composites written by Senthilkumar Krishnasamy and published by John Wiley & Sons. This book was released on 2022-04-18 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural Fiber-Reinforced Composites In-depth overview of thermal analysis of natural fiber-reinforced composites In Natural Fiber-Reinforced Composites: Thermal Properties and Applications, a team of distinguished researchers has delivered a comprehensive overview of the thermal properties of natural fiber-reinforced polymer composites. The book brings together information currently dispersed throughout the scientific literature and offers viable and environmentally friendly alternatives to conventional composites. The book highlights the thermal analysis of natural fiber-reinforced composites with techniques such as Thermogravimetric Analysis, Dynamic Mechanical Analysis, Thermomechanical Analysis, Differential Scanning Calorimetry, etc. This book provides: A thorough review of the thermal characterization of natural fiber-based hybrid composites Detailed investigation of the thermal properties of polymer composites reinforced with various natural fibers such as flax fiber, pineapple leaf fiber, sisal, sugar palm, grass fiber and cane fiber Discussions on the thermal properties of hybrid natural fiber-reinforced composites with various thermosetting and thermoplastic polymers Influence of nanofillers on the thermal stability and thermal decomposition characteristics of the natural fiber-based hybrid composites Natural Fiber-Reinforced Composites: Thermal Properties and Applications is a must-read for materials scientists, polymer chemists, and professionals working in the industry. This book is ideal for readers seeking to make an informed decision regarding materials selection for applications involving thermal insulation and elevated temperature. The suitability of natural fiber-reinforced composites in the automotive, mechanical, and civil engineering sectors is highlig

Download or read book Surface Treatment Methods of Natural Fibres and their Effects on Biocomposites written by Asim Shahzad and published by Woodhead Publishing. This book was released on 2022-03-25 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural fiber composites have experienced a renaissance over the last two decades as a response to societal demands for developing eco-friendly, biodegradable and recyclable materials. They are now being extensively used in everyday products as well as in automotive, packaging, sports and the construction industries. These fibers require surface treatments in order to improve their properties and interfacial bonding with polymer matrices, and to reduce their hydrophilic character. These methods can be grouped into three major categories: chemical, physical and biological. Chemical methods use chemical reagents to reduce fibers’ hydrophilic tendency and thus improve compatibility with the matrix. They also expose more reactive groups on the fibre surface to facilitate efficient coupling with the matrix. Physical methods change structural and surface properties of the fiber and thereby influence the interfacial bonding with matrices, without extensively changing the chemical composition of the fibers. They are cleaner and simpler than the chemical methods. Biological methods use biological agents like fungi, enzymes and bacteria to modify the fiber surface properties. These methods are not toxic like chemical methods and are not energy-intensive like physical methods. Surface Treatment Methods of Natural Fibers and their Effects on Biocomposites presents an overview and recent developments of these methods. All the major methods are reviewed, explaining the science and methodology behind each method. The effects of these methods on various properties of fibers and the biocomposites made from these fibers are analyzed in detail. The book will be an essential reference for academic researchers, materials scientists and engineers, postgraduate students and industrial researchers and development scientists and engineers working on natural fibers and biocomposites. Extensive coverage of all the surface modification methods (chemical, physical, biological) of natural fibers and its effect on properties of produced composites The chemical mechanisms which are utilized in surface treatments are discussed in detail and how these affect the interfacial properties and characteristics Systematic and comprehensive review on surface modifications of natural fibres, and explains how the effect of the surface treatment can be characterized and measured, as well as the effect on properties

Download or read book Natural and Wood Fibre Reinforcement in Polymers written by A. K. Bledzki and published by iSmithers Rapra Publishing. This book was released on 2002 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report examines the different fibre types available and the current research. The authors have cited several hundred references to the latest work on properties, processing and applications. The different methods of fibre pretreatment are examined, together with fibre properties, chemistry and applications. This review is accompanied by summaries of papers from the Rapra Polymer Library database.