Download or read book Introduction to the Numerical Modeling of Groundwater and Geothermal Systems written by Jochen Bundschuh and published by CRC Press. This book was released on 2010-07-05 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an introduction to the scientific fundamentals of groundwater and geothermal systems. In a simple and didactic manner the different water and energy problems existing in deformable porous rocks are explained as well as the corresponding theories and the mathematical and numerical tools that lead to modeling and solving them. This

Download or read book Geoenergy Modeling II written by Haibing Shao and published by Springer. This book was released on 2016-10-06 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is dedicated to the numerical modeling of shallow geothermal systems. The utilization of shallow geothermal energy involves the integration of multiple Borehole Heat Exchangers (BHE) with Ground Source Heat Pump (GSHP) systems to provide heating and cooling. The modeling practices explained in this book can improve the efficiency of these increasingly common systems. The book begins by explaining the basic theory of heat transport processes in man-made as well as natural media. . These techniques are then applied to the simulation of borehole heat exchangers and their interaction with the surrounding soil. The numerical and analytical models are verified against analytical solutions and measured data from a Thermal Response Test, and finally, a real test site is analyzed through the model and discussed with regard to BHE and GSHP system design and optimization.

Download or read book Geochemical Modeling of Groundwater Vadose and Geothermal Systems written by Jochen Bundschuh and published by CRC Press. This book was released on 2011-12-23 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geochemical modeling is an important tool in environmental studies, and in the areas of subsurface and surface hydrology, pedology, water resources management, mining geology, geothermal resources, hydrocarbon geology, and related areas dealing with the exploration and extraction of natural resources. The book fills a gap in the literature through

Download or read book Introduction to Groundwater Modeling written by Herbert F. Wang and published by Academic Press. This book was released on 1995-07-26 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: The dramatic advances in the efficiency of digital computers during the past decade have provided hydrologists with a powerful tool for numerical modeling of groundwater systems. Introduction to Groundwater Modeling presents a broad, comprehensive overview of the fundamental concepts and applications of computerized groundwater modeling. The book covers both finite difference and finite element methods and includes practical sample programs that demonstrate theoretical points described in the text. Each chapter is followed by problems, notes, and references to additional information. This volume will be indispensable to students in introductory groundwater modeling courses as well as to groundwater professionals wishing to gain a complete introduction to this vital subject. Key Features * Systematic exposition of the basic ideas and results of Hilbert space theory and functional analysis * Great variety of applications that are not available in comparable books * Different approach to the Lebesgue integral, which makes the theory easier, more intuitive, and more accessible to undergraduate students

Download or read book Geoenergy Modeling III written by Norihiro Watanabe and published by Springer. This book was released on 2016-11-10 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on numerical modeling of deep hydrothermal and petrothermal systems in fractured georeservoirs for utilization in Geothermal Energy applications. The authors explain the particular challenges and approaches to modeling heat transport and high-throughput flow in multiply fractured porous rock formations. In order to help readers gain a system-level understanding of the necessary analysis, the authors include detailed examples of growing complexity as the techniques explained in the text are introduced. The coverage culminates with the fully-coupled analysis of real deep geothermal test-sites located in Germany and France.

Download or read book Mathematical and Numerical Modeling in Porous Media written by Martin A. Diaz Viera and published by CRC Press. This book was released on 2012-07-24 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Porous media are broadly found in nature and their study is of high relevance in our present lives. In geosciences porous media research is fundamental in applications to aquifers, mineral mines, contaminant transport, soil remediation, waste storage, oil recovery and geothermal energy deposits. Despite their importance, there is as yet no complete

Download or read book Numerical Simulation in Hydraulic Fracturing Multiphysics Theory and Applications written by Xinpu Shen and published by CRC Press. This book was released on 2017-03-27 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: The expansion of unconventional petroleum resources in the recent decade and the rapid development of computational technology have provided the opportunity to develop and apply 3D numerical modeling technology to simulate the hydraulic fracturing of shale and tight sand formations. This book presents 3D numerical modeling technologies for hydraulic fracturing developed in recent years, and introduces solutions to various 3D geomechanical problems related to hydraulic fracturing. In the solution processes of the case studies included in the book, fully coupled multi-physics modeling has been adopted, along with innovative computational techniques, such as submodeling. In practice, hydraulic fracturing is an essential project component in shale gas/oil development and tight sand oil, and provides an essential measure in the process of drilling cuttings reinjection (CRI). It is also an essential measure for widened mud weight window (MWW) when drilling through naturally fractured formations; the process of hydraulic plugging is a typical application of hydraulic fracturing. 3D modeling and numerical analysis of hydraulic fracturing is essential for the successful development of tight oil/gas formations: it provides accurate solutions for optimized stage intervals in a multistage fracking job. It also provides optimized well-spacing for the design of zipper-frac wells. Numerical estimation of casing integrity under stimulation injection in the hydraulic fracturing process is one of major concerns in the successful development of unconventional resources. This topic is also investigated numerically in this book. Numerical solutions to several other typical geomechanics problems related to hydraulic fracturing, such as fluid migration caused by fault reactivation and seismic activities, are also presented. This book can be used as a reference textbook to petroleum, geotechnical and geothermal engineers, to senior undergraduate, graduate and postgraduate students, and to geologists, hydrogeologists, geophysicists and applied mathematicians working in this field. This book is also a synthetic compendium of both the fundamentals and some of the most advanced aspects of hydraulic fracturing technology.

Download or read book Geothermal Systems and Energy Resources written by Alper Baba and published by CRC Press. This book was released on 2014-03-07 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the region comprising Turkey and Greece, people have been using water from geothermal sources for bathing and washing of clothes since ancient times. This region falls within the Alpine-Himalayan orogenic belt and hence is a locus of active volcanism and tectonism and experiences frequent seismic events. This volcanic and tectonic activity has g

Download or read book Computational Models for CO2 Geo sequestration Compressed Air Energy Storage written by Rafid Al-Khoury and published by CRC Press. This book was released on 2014-04-17 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive mathematical and computational modeling of CO2 Geosequestration and Compressed Air Energy StorageEnergy and environment are two interrelated issues of great concern to modern civilization. As the world population will soon reach eight billion, the demand for energy will dramatically increase, intensifying the use of fossil fuels. Ut

Download or read book Numerical Modeling of Liquid Geothermal Systems written by M. L. Sorey and published by . This book was released on 1978 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Tubular String Characterization in High Temperature High Pressure Oil and Gas Wells written by Jiuping Xu and published by CRC Press. This book was released on 2018-10-30 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: High temperature, high oil pressure, oil and gas well completion testing have always been a technical challenge and basic theoretical research is one of the key factors needed to ensure a successful completion test. The completion test basic theory includes: a stress analysis of the completion string, completion string buckling behavior, and temperature and pressure distribution prediction. The completion string is the main bearing and power transmission component for oil and gas well operations and production, and it is required to take on a combination of loads, which result in completion string deformation. Because of these complex relationships, completion string stress analysis has become increasingly more complicated. This book discusses the characters of tubular strings in HTHP (High Temperature - High Pressure) oil and gas wells. These characters include the mechanical behavior of tubular strings and the temperature and pressure variation of tubular strings in different conditions. Mathematical models are established for different conditions and solution existence and uniqueness of some models is discussed, providing algorithms corresponding to the different models. Numerical experiments are presented to verify the validity of models and the feasibility of algorithms, and the impact of the parameters of models for oil and gas wells is also discussed. This book is written for production and testing engineers to provide them with the tools to deal more effectively with the numerical decisions they have to take and for researchers and technicians in petroleum and gas testing and production engineering. Finally, it is also intended to serve as a reference book for mathematicians, college teachers and students.

Download or read book Geothermal Wind and Solar Energy Applications in Agriculture and Aquaculture written by Jochen Bundschuh and published by CRC Press. This book was released on 2017-08-02 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: The agri-food chain consumes about one third of the world’s energy production with about 12% of it for crop production and nearly 80% for processing, distribution, retail, preparation and cooking. The agri-food chain also accounts for 80-90% of total global freshwater use where 70% alone is for irrigation. Additionally, on a global scale, freshwater production consumes nearly 15% of the entire energy production. It can therefore be argued that making agriculture and the agri-food supply chain independent from fossil fuel use has a huge potential to contribute to global food security and climate protection not only for the next decades but also for the coming century. Provision of secure, accessible and environmentally sustainable supplies of water, energy and food must thus be a priority. One of the major objectives of the world’s scientists, farmers, decisions makers and industrialists is to overcome the present dependence on fossil fuels in the agro-food sector. This dependency increases the volatility of food prices and affects economic access to sustenance. This book provides a critical review of recent developments in solar, wind and geothermal energy applications in agriculture and the agro-food sector such as processing, distribution, retail, preparation and cooking.

Download or read book Sustainable Energy Solutions in Agriculture written by Jochen Bundschuh and published by CRC Press. This book was released on 2014-03-07 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainability in agriculture and associated primary industries, which are both energy-intensive, is crucial for the development of any country. Increasing scarcity and resulting high fossil fuel prices combined with the need to significantly reduce greenhouse gas emissions, make the improvement of energy efficient farming and increased use of renewable energy essential. This book provides a technological and scientific endeavor to assist society and farming communities in different regions and scales to improve their productivity and sustainability. To fulfill future needs of a modern sustainable agriculture, this book addresses highly actual topics providing innovative, effective and more sustainable solutions for agriculture by using sustainable, environmentally friendly, renewable energy sources and modern energy efficient, cost-improved technologies. The book highlights new areas of research, and further R&D needs. It helps to improve food security for the rapidly growing world population and to reduce carbon dioxide emissions from fossil fuel use in agriculture, which presently contributes 22% of the global carbon dioxide emissions. This book provides a source of information, stimuli and incentives for what and how new and energy efficient technologies can be applied as effective tools and solutions in agricultural production to satisfy the continually increasing demand for food and fibre in an economically sustainable way, while contributing to global climate change mitigation. It will be useful and inspiring to decision makers working in different authorities, professionals, agricultural engineers, researchers, and students concerned with agriculture and related primay industries, sustainable energy development and climate change mitigation projects.

Download or read book Numerical Modeling of Liquid Geothermal Systems written by M. L. Sorey and published by . This book was released on 1978 with total page 25 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book In Situ Remediation of Arsenic Contaminated Sites written by Jochen Bundschuh and published by CRC Press. This book was released on 2018-10-30 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing an introduction, the scientific background, case studies and future perspectives of in-situ arsenic remediation technologies for soils, soil water and groundwater at geogenic and anthropogenic contaminated sites. The case studies present in-situ technologies about natural arsenic, specifically arsenate and arsenite, but also about organic arsenic compounds. This work covers geochemical, microbiological and plant ecological solutions for arsenic remediation. It will serve as a standard textbook for (post-)graduate students and researchers in the field of Environmental Sciences and Hydrogeochemistry as well as researchers, engineers, environmental scientists and chemists, toxicologists, medical scientists and even for general public seeking an in-depth view of arsenic which had been classed as a carcinogen. This book aims to stimulate awareness among administrators, policy makers and company executives of in-situ remediation technologies at sites contamined by arsenic and to improve the international cooperation on the subject.

Download or read book Renewable Energy Applications for Freshwater Production written by Jochen Bundschuh and published by CRC Press. This book was released on 2012-07-02 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Worldwide, many regions have a great potential to cover part of their pressing water needs by renewable energy powered water treatment processes using either thermal or membrane based technologies. Not only arid and semiarid regions are increasingly suffering from water shortage but also many other regions face a limitation of freshwater resources either by increasing contamination of surface water bodies or groundwater resources unsuitable for drinking and irrigation purposes either due to their high grade of mineralization or their contents of toxic components. In many areas without centralized water supply, treatment techniques using locally available renewable energy resources such as wind, solar and geothermal can provide an economical, social and environmentally sustainable option for clean water production from seawater and from highly mineralized or otherwise unsuitable ground- and surface water. This book provides an overview on possible cost-efficient techniques and application opportunities for different scales and shows why the implementation of these technologies faces numerous technological, economic and policy barriers and provides suggestions how they can be overcome. It serves as a synoptic compendium of the fundamentals of freshwater production using renewable energies, applicable to all types of water, ranging from brackish to marine water and also including industrial and communal residual water. The book is aimed at professionals, academics and decision makers worldwide, working in the areas of water resources, water supply,land planning, energy planning, greenhouse gases emission mitigation and rural development.

Download or read book Membrane Technologies for Water Treatment written by Alberto Figoli and published by CRC Press. This book was released on 2016-02-18 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focuses on the application of membrane technologies in removing toxic metals\metalloids from water. Particular attention is devoted to the removal of arsenic, uranium, and fluoride. These compounds are all existing in the earth’s crust at levels between two and five thousands micrograms per kg (parts per million) on average and these compounds can be considered highly toxic to humans, who are exposed to them primarily from air, food and water. In order to comply with the new maximum contaminant level, numerous studies have been undertaken to improve established treatments or to develop novel treatment technologies for removing toxic metals from contaminated surface and groundwater. Among the technologies available, applicable for water treatment, membrane technology has been identified as a promising technology to remove such toxic metals from water. The book describes both pressure driven (traditional processes, such as Nanofiltration, Reverse Osmosis, Ultrafiltration,etc) and more advanced membrane processes (such as forward osmosis, membrane distillation, and membrane bio-reactors) employed in the application of interest. Key aspect of this book is to provide information on both the basics of membrane technologies and on the results depending on the type of technology employed.