Download or read book Introduction to Light Emitting Diode Technology and Applications written by Gilbert Held and published by CRC Press. This book was released on 2016-04-19 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent improvements in LED technology have made them as ubiquitous as cell phones. In fact, LEDs light up almost all cell phones screens. The technology's myriad applications and low energy use have made it nearly impossible to get through daily chores without coming in contact with LEDs. Probable advances include increased ability of the technology to support more efficient lighting and enhanced communications. With balanced coverage of the basics and future developments, Introduction to Light Emitting Diode Technology and Applications takes you on a tour of the LED evolution. The book begins with a brief history of the effort to enable the device that generates light through modern organic LEDs and reviews the fundamentals and principles of light prior to a detailed explanation of how LEDs generate different colors. After forming this basic foundation, the book examines the key LEDs in lighting and communications. It then discusses the latest opportunities and advancements in high brightness (HB) LED technology, solid state lighting, and handheld electronic applications. As we approach a new decade the role of LEDs is literally set to explode, with organic light emitting diodes emerging as a leading next generation technology for electronic displays and lighting. Challenges still exist, including light extraction, luminosity, and white light generation, not to mention non-technical obstacles such as IP disputes and the lack of standards. This book provides a foundation for resolving these issues and developing new applications for LEDs in the promising general illumination market.
Download or read book Introduction to the Light Emitting Diode written by Hisashi Masui and published by Springer Nature. This book was released on 2023-05-12 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the industrial aspects of light-emitting diodes (LEDs) for solid-state lighting (SSL). The author targets his approach primarily to industrial engineers, in order to guide them in the LED industry. The coverage is highly-applied and based on author’s 32 years of experience in the LED industry and academia. The book starts by addressing the needs that new engineers encounter in an LED company, e.g., characterization, manufacturing, and applications. Later chapters introduce deeper science for more experienced engineers and academic readers. As a result, this book can benefit LED engineers throughout their career.
Download or read book The Fundamentals and Applications of Light Emitting Diodes written by Govind B. Nair and published by Woodhead Publishing. This book was released on 2020-07-09 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Fundamentals and Applications of Light-Emitting Diodes: The Revolution in the Lighting Industry examines the evolution of LEDs, including a review of the luminescence process and background on solid state lighting. The book emphasizes phosphor-converted LEDs that are based on inorganic phosphors but explores different types of LEDs based on inorganic, organic, quantum dots, perovskite-structured materials, and biomaterials. A detailed description is included about the diverse applications of LEDs in fields such as lighting, displays, horticulture, biomedicine, and digital communication, as well as challenges that must be solved before using LEDs in commercial applications. Traditional light sources are fast being replaced by light-emitting diodes (LEDs). The fourth generation of lighting is completely dominated by LED luminaires. Apart from lighting, LEDs have extended their hold on other fields, such as digital communications, horticulture, medicine, space research, art and culture, display devices, and entertainment. The technological promises offered by LEDs have elevated them as front-runners in the lighting industry. Presents a concise overview of different types of light-emitting diodes (LEDs) based on inorganic phosphors, organic materials, quantum dots, perovskite-structured materials, and biomaterials Includes a discussion of current and emerging applications in lighting, communications, horticulture, and medical fields Addresses fundamentals, luminescence mechanisms, and key optical materials, including synthesis methods
Download or read book Introduction to the Light Emitting Diode written by Hisashi Masui and published by Springer Nature. This book was released on with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Luminescence and the Light Emitting Diode written by E. W. Williams and published by Elsevier. This book was released on 2016-01-19 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Luminescence and the Light Emitting Diode: The Basics and Technology of LEDS and the Luminescence Properties of the Materials focuses on the basic physics and technology of light emitting diodes (LEDS) and pn junction lasers as well as their luminescence properties. Optical processes in semiconductors and the useful devices which can be made are discussed. Comprised of 10 chapters, this book begins with an introduction to the crystal structure and growth, as well as the optical and electrical properties of LED materials. The detailed fabrication of the LED is then considered, along with the luminescence of the material and the diode light emission. Subsequent chapters explore solid-state lasers made from LED materials; the equipment used to measure luminescence, cathodoluminescence, and diode electro-optic characteristics; and luminescence in gallium arsenide, GaAs1-xPx, and gallium phosphide. Other LED materials such as silicon carbide and ternary semiconducting compounds are also surveyed. The text concludes with a brief chapter that describes some of the applications of LEDs and LED products. This monograph will be of value to students and non-graduate engineers with an interest in LEDs.
Download or read book Introduction to Nitride Semiconductor Blue Lasers and Light Emitting Diodes written by Shuji Nakamura and published by CRC Press. This book was released on 2000-03-09 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: The "blue laser" is an exciting new device used in physics. The potential is now being recognized for its development into a commercial lighting system using about a tenth of the power and with a thousand times the operating lifetime of a comparable conventional system. This comprehensive work introduces the subject at a level suitable for graduate students. It covers the basics physics of light emitting diodes (LEDs) and laser diodes (LDs) based on gallium nitride and related nitride semiconductors, and gives an outline of their structural, transport and optical properties, and the relevant device physics. It begins with the fundamentals, and covers both theory and experiment, as well as an examination of actual and potential device applications. Shuji Nakamura and Nichia Chemicals Industries made the initial breakthroughs in the field, and these have revealed that LEDs and LDs are a sophisticated physical phenomenon and a commercial reality.
Download or read book Quantum dot Based Light emitting Diodes written by Morteza Sasani Ghamsari and published by BoD – Books on Demand. This book was released on 2017-10-25 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quantum dot-based light emitting diodes were assigned to bringing together the latest and most important progresses in light emitting diode (LED) technologies. In addition, they were dedicated to gain the perspective of LED technology for all of its advancements and innovations due to the employment of semiconductor nanocrystals. Highly selective, the primary aim was to provide a visual source for high-urgency work that will define the future directions relating to the organic light emitting diode (OLED), with the expectation for lasting scientific and technological impact. The editor hopes that the chapters verify the realization of the mentioned aims that have been considered for editing of this book. Due to the rapidly growing OLED technology, we wish this book to be useful for any progress that can be achieved in future.
Download or read book Introduction to Solid State Lighting written by Artūras Žukauskas and published by Wiley-Interscience. This book was released on 2002-04-18 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: A thorough reference that sheds light on the promising field of solid-state lighting Solid-state lighting is a rapidly emerging field. Light Emitting Diodes are already used in traffic signals, signage/contour lighting, large area displays, and automotive applications. But its greatest future lies in the possibility of applying solid-state lamps to general lighting. Solid-state lighting promises to reduce energy consumption as much as fifty percent, cut down on carbon-dioxide emission, and even spur the development of a completely new lighting industry. Giving this important emerging field the attention it deserves, Introduction to Solid-State Lighting comprehensively covers: The history of lighting The characterization of visible light Conventional light sources LED basics Extraction of light from high-brightness LEDs White LED Applications of solid-state lamps
Download or read book LED for Lighting Applications written by Patrick Mottier and published by John Wiley & Sons. This book was released on 2010-01-05 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: Light Emitting Diodes (LEDs) are no longer confined to use in commercial signage and have now moved firmly, and with unquestioned advantages, into the field of commercial and domestic lighting. This development was prompted in the late 1980s by the invention of the blue LED, a wavelength that had previously been missing from the available LED spectrum and which opened the way to providing white light. Since that point, LED performance (including energy efficiency) has improved dramatically, and now compares with the performance of fluorescent lights - and there remain further performance improvements yet to be delivered. The book begins with the principles of LED lighting, then focuses on issues and challenges. Chapters are devoted to key steps in LED manufacturing: substrate, epitaxy, process and packaging. Photoelectric characterization of LEDs, Lighting with LEDs and the imposition of a certain level of color quality, are the subject of later chapters, and finally there is a detailed discussion of the emergence of OLEDs, or organic LEDs, which have specific capabilities of immediate interest and importance in this field.
Download or read book III Nitride Based Light Emitting Diodes and Applications written by Tae-Yeon Seong and published by Springer Science & Business Media. This book was released on 2014-07-08 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Light emitting diodes (LEDs) are already used in traffic signals, signage lighting, and automotive applications. However, its ultimate goal is to replace traditional illumination through LED lamps since LED lighting significantly reduces energy consumption and cuts down on carbon-dioxide emission. Despite dramatic advances in LED technologies (e.g., growth, doping and processing technologies), however, there remain critical issues for further improvements yet to be achieved for the realization of solid-state lighting. This book aims to provide the readers with some contemporary LED issues, which have not been comprehensively discussed in the published books and, on which the performance of LEDs is seriously dependent. For example, most importantly, there must be a breakthrough in the growth of high-quality nitride semiconductor epitaxial layers with a low density of dislocations, in particular, in the growth of Al-rich and and In-rich GaN-based semiconductors. The materials quality is directly dependent on the substrates used, such as sapphire, Si, etc. In addition, efficiency droop, growth on different orientations and polarization are also important. Chip processing and packaging technologies are key issues. This book presents a comprehensive review of contemporary LED issues. Given the interest and importance of future research in nitride semiconducting materials and solid state lighting applications, the contents are very timely. The book is composed of chapters written by leading researchers in III-nitride semiconducting materials and device technology. This book will be of interest to scientists and engineers working on LEDs for lighting applications. Postgraduate researchers working on LEDs will also benefit from the issues this book provides.
Download or read book Principles of Solar Cells LEDs and Diodes written by Adrian Kitai and published by John Wiley & Sons. This book was released on 2011-09-13 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The book will cover the two most important applications of semiconductor diodes - solar cells and LEDs - together with quantitative coverage of the physics of the PN junction at the senior undergraduate level. It will include: Review of semiconductor physics Introduction to PN diodesThe solar cell Physics of efficient conversion of sunlight into electrical energy Semiconductor solar cell materials and device physics Advanced solar cell materials and devices The light emitting diode Physics of efficient conversion of electrical energy into light Semiconductor light emitting diode materials and device physics Advanced light emitting diode materials and devices"--
Download or read book Light Emitting Diodes for Agriculture written by S Dutta Gupta and published by Springer. This book was released on 2017-10-25 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive treatise on the advances in the use of light-emitting diodes (LEDs) for sustainable crop production and describes the latest photomorphogenesis research findings. It introduces readers to the fundamentals and design features of LEDs applicable for plant growth and development and illustrates their advantages over the traditional lighting systems, including cost analyses. Further, it discusses a wide range of applications covering diverse areas of plant sciences relevant to controlled environment agriculture and in vitro plant morphogenesis. The chapters have been written by a team of pioneering international experts, who have made significant contributions to this emerging interdisciplinary field. The book will serve a valuable resource for graduate students, instructors, and researchers in the fields of horticulture, agricultural biotechnology, cell and developmental biology, and precision agriculture. It will also serve well professionals engaged in greenhouse and vertical farming.
Download or read book Introduction to Nitride Semiconductor Blue Lasers and Light Emitting Diodes written by Shuji Nakamura and published by CRC Press. This book was released on 2000-03-09 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: The "blue laser" is an exciting new device used in physics. The potential is now being recognized for its development into a commercial lighting system using about a tenth of the power and with a thousand times the operating lifetime of a comparable conventional system. This comprehensive work introduces the subject at a level suitable for graduate
Download or read book LED Packaging for Lighting Applications written by Shen Liu and published by John Wiley & Sons. This book was released on 2011-07-05 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the first light-emitting diode (LED) was invented by Holonyak and Bevacqua in 1962, LEDs have made remarkable progress in the past few decades with the rapid development of epitaxy growth, chip design and manufacture, packaging structure, processes, and packaging materials. LEDs have superior characteristics such as high efficiency, small size, long life, low power consumption, and high reliability. The market for white LED is growing rapidly in various applications. It has been widely accepted that white LEDs will be the fourth illumination source to substitute the incandescent, fluorescent, and high-pressure sodium lamps. With the development of LED chip and packaging technologies, the efficiency of high power white LED will broaden the application markets of LEDs while changing the lighting concepts of our lives. In LED Packaging for Lighting Applications, Professors Liu and Luo cover the full spectrum of design, manufacturing, and testing. Many concepts are proposed for the first time, and readers will benefit from the concurrent engineering and co-design approaches to advanced engineering design of LED products. One of the only books to cover LEDs from package design to manufacturing to testing Focuses on the design of LED packaging and its applications such as road lights Includes design methods and experiences necessary for LED engineers, especially optical and thermal design Introduces novel LED packaging structures and manufacturing processes, such as ASLP Covers reliability considerations, the most challenging problem for the LED industry Provides measurement and testing standards, which are critical for LED development, for both LED and LED fixtures Codes and demonstrations available from the book’s Companion Website This book is ideal for practicing engineers working in design or packaging at LED companies and graduate students preparing for work in industry. This book also provides a helpful introduction for advanced undergraduates, graduates, researchers, lighting designers, and product managers interested in the fundamentals of LED design and production. Color version of selected figures can be found at www.wiley.com/go/liu/led
Download or read book Thermally Activated Delayed Fluorescence Organic Light Emitting Diodes TADF OLEDs written by Lian Duan and published by Woodhead Publishing. This book was released on 2021-10-15 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermally Activated Delayed Fluorescence Organic Light-Emitting Diodes (TADF-OLEDs) comprehensively introduces the history of TADF, along with a review of fundamental concepts. Then, TADF emitters with different colors, such as blue, green, red and NIR as well as white OLEDs are discussed in detail. Other sections cover exciplex-type TADF materials, emerging application of TADF emitters as a host in OLEDs, and applications of TADF materials in organic lasers and biosensing. Discusses green, blue, red, NIR and white TADF emitters and their design strategies for improved performance for light-emitting diode applications Addresses emerging materials, such as molecular and exciplex-based TADF materials Includes emerging applications like lasers and biosensors
Download or read book Understanding LED Illumination written by M. Nisa Khan and published by CRC Press. This book was released on 2013-08-20 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding LED Illumination elucidates the science of lighting for light emitting diodes. It presents concepts, theory, simulations, and new design techniques that shine the spotlight on illumination, energy efficiency, and reducing electrical power consumption. The text provides an introduction to the fundamentals of LED lamp design, and highli
Download or read book Assessment of Solid State Lighting Phase Two written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2017-05-11 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt: The standard incandescent light bulb, which still works mainly as Thomas Edison invented it, converts more than 90% of the consumed electricity into heat. Given the availability of newer lighting technologies that convert a greater percentage of electricity into useful light, there is potential to decrease the amount of energy used for lighting in both commercial and residential applications. Although technologies such as compact fluorescent lamps (CFLs) have emerged in the past few decades and will help achieve the goal of increased energy efficiency, solid-state lighting (SSL) stands to play a large role in dramatically decreasing U.S. energy consumption for lighting. Since the publication of the 2013 National Research Council report Assessment of Advanced Solid-State Lighting, the penetration of SSL has increased dramatically, with a resulting savings in energy and costs that were foreshadowed by that study. What was not anticipated then is the dramatic dislocation and restructuring of the SSL marketplace, as cost reductions for light-emitting diode (LED) components reduced profitability for LED manufacturers. At the same time, there has been the emergence of new applications for SSL, which have the potential to create new markets and commercial opportunities for the SSL industry. Assessment of Solid-State Lighting, Phase Two discusses these aspects of changeâ€"highlighting the progress of commercialization and acceptance of SSL and reviewing the technical advances and challenges in achieving higher efficacy for LEDs and organic light-emitting diodes. This report will also discuss the recent trends in SSL manufacturing and opportunities for new applications and describe the role played by the Department of Energy (DOE) Lighting Program in the development of SSL.