Download or read book Introduction to the Formal Design of Real Time Systems written by David F. Gray and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: but when we state that A 'equals' B , as well having to know what we mean by A and B we also have know what we mean by 'equals'. This section explores the role of observers; how different types of observ er see different things as being equal, and how we can produce algo rithms to decide on such equalities. It also explores how we go about writing specifications to which we may compare our SCCS designs. • The final section is the one which the students like best. Once enough of SCCS is grasped to decide upon the component parts of a design, the 'turning the handle' steps of composition and check ing that the design meets its specification are both error-prone and tedious. This section introduces the concurrency work bench, which shoulders most of the burden. How you use the book is up to you; I'm not even going to suggest path ways. Individual readers know what knowledge they seek, and course leaders know which concepts they are trying to impart and in what order.

Download or read book Introduction to the Formal Design of Real Time Systems written by David F. Gray and published by Springer. This book was released on 2011-10-04 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: but when we state that A 'equals' B , as well having to know what we mean by A and B we also have know what we mean by 'equals'. This section explores the role of observers; how different types of observ er see different things as being equal, and how we can produce algo rithms to decide on such equalities. It also explores how we go about writing specifications to which we may compare our SCCS designs. • The final section is the one which the students like best. Once enough of SCCS is grasped to decide upon the component parts of a design, the 'turning the handle' steps of composition and check ing that the design meets its specification are both error-prone and tedious. This section introduces the concurrency work bench, which shoulders most of the burden. How you use the book is up to you; I'm not even going to suggest path ways. Individual readers know what knowledge they seek, and course leaders know which concepts they are trying to impart and in what order.

Download or read book Real Time Systems Design and Analysis written by Phillip A. Laplante and published by Wiley-IEEE Press. This book was released on 1997 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: "IEEE Press is pleased to bring you this Second Edition of Phillip A. Laplante's best-selling and widely-acclaimed practical guide to building real-time systems. This book is essential for improved system designs, faster computation, better insights, and ultimate cost savings. Unlike any other book in the field, REAL-TIME SYSTEMS DESIGN AND ANALYSIS provides a holistic, systems-based approach that is devised to help engineers write problem-solving software. Laplante's no-nonsense guide to real-time system design features practical coverage of: Related technologies and their histories Time-saving tips * Hands-on instructions Pascal code Insights into decreasing ramp-up times and more!"

Download or read book Real Time Systems written by Hermann Kopetz and published by Springer Science & Business Media. This book was released on 2006-04-18 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: 7. 6 Performance Comparison: ET versus TT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164 7. 7 The Physical Layer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 Points to Remember . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168 Bibliographic Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169 Review Questions and Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170 Chapter 8: The Time-Triggered Protocols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 8. 1 Introduction to Time-Triggered Protocols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172 8. 2 Overview of the TTP/C Protocol Layers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175 8. 3 TheBasic CNI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178 Internal Operation of TTP/C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181 8. 4 8. 5 TTP/A for Field Bus Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185 Points to Remember. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188 Bibliographic Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 Review Questions and Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 Chapter 9: Input/Output. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193 9. 1 The Dual Role of Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194 9. 2 Agreement Protocol. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196 9. 3 Sampling and Polling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198 9. 4 Interrupts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201 9. 5 Sensors and Actuators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203 9. 6 Physical Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207 Points to Remember. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208 Bibliographic Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209 Review Questions and Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209 Chapter 10: Real-Time Operating Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211 10. 1 Task Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212 10. 2 Interprocess Communication. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216 10. 3 Time Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218 10. 4 Error Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219 10. 5 A Case Study: ERCOS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221 Points to Remember. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223 Bibliographic Notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224 Review Questions and Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224 Chapter 11: Real-Time Scheduling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227 11. 1 The Scheduling Problem. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228 11. 2 The Adversary Argument. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229 11. 3 Dynamic Scheduling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231 x TABLE OF CONTENTS 11. 4 Static Scheduling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237 Points to Remember. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240 Bibliographic Notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242 Review Questions and Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242 Chapter 12: Validation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245 12. 1 Building aConvincing Safety Case. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 246 12. 2 Formal Methods. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 248 12. 3 Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Download or read book Real time Design Patterns written by Bruce Powel Douglass and published by Addison-Wesley Professional. This book was released on 2003 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revised and enlarged edition of a classic in Old Testament scholarship reflects the most up-to-date research on the prophetic books and offers substantially expanded discussions of important new insight on Isaiah and the other prophets.

Download or read book Software Design for Real time Systems written by J. E. Cooling and published by Springer. This book was released on 2013-11-11 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: WHAT IS THIS BOOKABOUT7 In recent times real-time computer systems have become increasingly complex and sophisticated. It has now become apparent that, to implement such schemes effectively, professional, rigorous software methods must be used. This includes analysis, design and implementation. Unfortunately few textbooks cover this area well. Frequently they are hardware oriented with limited coverage of software, or software texts which ignore the issues of real-time systems. This book aims to fill that gap by describing the total software design and is given development process for real-time systems. Further, special emphasis of microprocessor-based real-time embedded systems. to the needs WHAT ARE REAL-TIME COMPUTER SYSTEMS? Real-time systems are those which must produce correct responses within a definite time limit. Should computer responses exceed these time bounds then performance degradation and/or malfunction results. WHAT ARE REAL-TIME EMBEDDED COMPUTER SYSTEMS? Here the computer is merely one functional element within a real-time system; it is not a computing machine in its own right. WHO SHOULD READ THIS BOOK? Those involved, or who intend to get involved, in the design of software for real-time systems. It is written with both software and hardware engineers in mind, being suitable for students and professional engineers.

Download or read book Formal Specification of Real time Systems written by Mario J. Teixeira and published by . This book was released on 1991 with total page 31 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract: "The interest in formal specification and validation of computer systems, and in particular of real-time systems, has increased recently due to the growing complexity of systems being delivered. This paper contains an introduction to some of the most promising techniques described in the literature to formally specify and validate a system, and outlines what the difficulties are in trying to apply them in practical situations. The focus will be on formalisms to express system specifications and on system automated verification; the main concepts of temporal logic and model checking are presented. A reliable broadcast protocol example is used to illustrate the ideas. Finally, further developments and research issues are pointed out."

Download or read book Time and Probability in Formal Design of Distributed Systems written by Hans A. Hansson and published by Elsevier Publishing Company. This book was released on 1994 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to the current economic climate, many, if not all, industries depend upon computer systems for their product, design and manufacturing processes and for routine business functions. Although the use of such systems brings many advantages, the consequences of failure (including physical failure of computer systems, software design faults and human error) can involve both loss of life and environmental damage. safeguards and subsequent accountability. Research funds are accordingly being generated by governments and leading industries, affording the development of safety-critical systems by multi-disciplinary teams of mechanical, structural, electronic and software engineers and, where appropriate, psychologists, sociologists and economists. A new book series Real-Time Safety Critical Systems has been launched as a forum to enable all relevant researchers and developers (from industry and academia world-wide) to report their findings in the field. This publication is the first in the series and concentrates on presenting a framework for specification and analysis of real-time and reliability in distributed systems. The framework consists of a language for modelling the behaviour of distributed systems, a logic for formulating system properties, and an algorithm for verifying that descriptions in the language satisfy formulas expressed in the logic. is also accessible to readers with only a basic knowledge of formal modelling. Indeed, as Willem-Paul de Roever says in his introduction to the publication, it ... constitutes an indispensable link in the education of our next generation of researchers ... [and] ... gives a clear and scientifically responsible description how real-time and probability can be added to process algebra, how to extend Emerson and Clarke's branching time temporal logic to these new features, and how to verify the properties thus expressed by an appropriate tool

Download or read book Formal Methods for the Design of Real Time Systems written by Marco Bernardo and published by Springer Science & Business Media. This book was released on 2004-09 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the revised versions of nine invited lectures presented by leading researchers at the fourth edition of the International School on Formal Methods for the Design of Computer, Communication, and Software Systems, SFT 2004, held in Bertinoro, Italy, September 2004. SFM 2004 is devoted to real-time systems. The lectures presented cover formal models and languages for the specification, modeling, analysis, and verification of time-critical systems, the expressiveness of such models and languages, as well as supporting tools and related applications in different domains. The book offers a unique and comprehensive state-of-the-art survey on real-time systems. Researchers and advanced students will appreciate the book as a valuable source of reference and a systematic guide to the use of formal methods for the specification, analysis, and verification of real-time systems.

Download or read book Real Time Systems Design and Analysis written by Phillip A. Laplante and published by John Wiley & Sons. This book was released on 2011-10-24 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: The leading text in the field explains step by step how to write software that responds in real time From power plants to medicine to avionics, the world increasingly depends on computer systems that can compute and respond to various excitations in real time. The Fourth Edition of Real-Time Systems Design and Analysis gives software designers the knowledge and the tools needed to create real-time software using a holistic, systems-based approach. The text covers computer architecture and organization, operating systems, software engineering, programming languages, and compiler theory, all from the perspective of real-time systems design. The Fourth Edition of this renowned text brings it thoroughly up to date with the latest technological advances and applications. This fully updated edition includes coverage of the following concepts: Multidisciplinary design challenges Time-triggered architectures Architectural advancements Automatic code generation Peripheral interfacing Life-cycle processes The final chapter of the text offers an expert perspective on the future of real-time systems and their applications. The text is self-contained, enabling instructors and readers to focus on the material that is most important to their needs and interests. Suggestions for additional readings guide readers to more in-depth discussions on each individual topic. In addition, each chapter features exercises ranging from simple to challenging to help readers progressively build and fine-tune their ability to design their own real-time software programs. Now fully up to date with the latest technological advances and applications in the field, Real-Time Systems Design and Analysis remains the top choice for students and software engineers who want to design better and faster real-time systems at minimum cost.

Download or read book Formal Development of a Network Centric RTOS written by Eric Verhulst and published by Springer Science & Business Media. This book was released on 2011-08-23 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many systems, devices and appliances used routinely in everyday life, ranging from cell phones to cars, contain significant amounts of software that is not directly visible to the user and is therefore called "embedded". For coordinating the various software components and allowing them to communicate with each other, support software is needed, called an operating system (OS). Because embedded software must function in real time (RT), a RTOS is needed. This book describes a formally developed, network-centric Real-Time Operating System, OpenComRTOS. One of the first in its kind, OpenComRTOS was originally developed to verify the usefulness of formal methods in the context of embedded software engineering. Using the formal methods described in this book produces results that are more reliable while delivering higher performance. The result is a unique real-time concurrent programming system that supports heterogeneous systems with just 5 Kbytes/node. It is compatible with safety related engineering standards, such as IEC61508.

Download or read book Real time System Design written by Shem-Tov Levi and published by McGraw-Hill Companies. This book was released on 1990 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer Systems Organization -- Special-Purpose and Application-Based Systems.

Download or read book Formal Modeling and Analysis of Timed Systems written by Krishnendu Chatterjee and published by Springer Science & Business Media. This book was released on 2010-08-30 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 8th International Conference on Formal Modeling and Analysis of Timed Systems, FORMATS 2010, held in Klosterneuburg, Austria in September 2010. The 14 papers presented were carefully reviewed and selected from 31 submissions. In addition, the volume contains 3 invited talks and 2 invited tutorials.The aim of FORMATS is to promote the study of fundamental and practical aspects of timed systems, and to bring together researchers from different disciplines that share an interest in the modeling and analysis of timed systems. Typical topics include foundations and semantics, methods and tools, and applications.

Download or read book Parallel Computing Technologies written by Victor Malyshkin and published by Springer Science & Business Media. This book was released on 2003-08-21 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 7th International Conference on Parallel Computing Technologies, PaCT 2003, held in Novosibirsk, Russia in September 2003. The 38 revised full papers presented together with 4 invited papers and 10 poster papers were carefully reviewed and selected from 78 submissions. The papers are organized in topical sections on theory, software, applications, and tools. A broad variety of parallel processing issues and distributed computing in general are addressed.

Download or read book Recent Advances In Information Science And Technology written by Nikos E Mastorakis and published by World Scientific. This book was released on 1998-10-12 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent Advances in Information Science and Technology brings you a balanced, state-of-the-art presentation of the latest concepts, methods, algorithms, techniques, procedures and applications of the fascinating field of Computer Science and Engineering. Written by eminent, leading, international experts, the contributors provide up-to-date aspects of topics discussed and present fresh, original insights into their own experience with Information Science and Technology.This rich “anthology of papers” which compose this volume, contains the latest developments and reflects the experience of many eminent researchers working in different environments (universities, research centers and industry).The book is composed of five parts:• Software Engineering in which new trends and recent scientific results in software engineering, data structures, algorithms, knowledge based systems, VLSI design, computer languages and industrial computer applications are presented.• Signal Processing in which modern topics in signal processing, identification, recognition, speech processing and detection are included.• Multi-Dimensional (m-D) Systems Theory and Applications which contains new research results in m-D systems theory and impressive applications of multidimensional systems mainly in signal processing.• Communication Systems containing modern topics of communication as Digital systems of communication, computer networks theory, ATM networks, optical networks, hybrid fibber coaxial networks, Internet etc.• Modern Numerical Techniques and Related Topics which covers some aspects of the modern computation science and technology.

Download or read book Modeling and Verification of Real time Systems written by Nicolas Navet and published by John Wiley & Sons. This book was released on 2013-03-07 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title is devoted to presenting some of the most important concepts and techniques for describing real-time systems and analyzing their behavior in order to enable the designer to achieve guarantees of temporal correctness. Topics addressed include mathematical models of real-time systems and associated formal verification techniques such as model checking, probabilistic modeling and verification, programming and description languages, and validation approaches based on testing. With contributions from authors who are experts in their respective fields, this will provide the reader with the state of the art in formal verification of real-time systems and an overview of available software tools.

Download or read book Reliable Software Technologies Ada Europe 99 written by Michael Gonzalez Harbour and published by Springer. This book was released on 2003-07-31 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Fourth International Conference on Reliable Software Technologies, Ada- Europe’99, took place in Santander, Spain, from June 7 to 11, 1999. It was sponsored by Ada Europe, the European federation of national Ada societies, in cooperation with ACM SIGAda and Ada Spain, and it was organized by members of the University of Cantabria and the Technical University of Madrid, in Spain. This was the 19th consecutive year of Ada Europe conferences, which have always been the main Ada events in Europe, with their counterparts being the ACM SIGAda conferences in the USA (formerly Tri Ada). The conference is not just devoted to the Ada language, but rather to the more general area of reliable software technologies. In this sense, there are papers on formal methods, testing, software architectures and design, software engineering tools, etc. We believe that the role of reliable software technologies is becoming increasingly important, as computer applications control more and more of our everyday systems. The goal of our conference is to contribute to advancing the state of the art of all the technologies that help us in achieving better and more reliable software at a lower overall cost.