Download or read book Prudent Practices in the Laboratory written by National Research Council and published by National Academies Press. This book was released on 2011-03-25 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prudent Practices in the Laboratory-the book that has served for decades as the standard for chemical laboratory safety practice-now features updates and new topics. This revised edition has an expanded chapter on chemical management and delves into new areas, such as nanotechnology, laboratory security, and emergency planning. Developed by experts from academia and industry, with specialties in such areas as chemical sciences, pollution prevention, and laboratory safety, Prudent Practices in the Laboratory provides guidance on planning procedures for the handling, storage, and disposal of chemicals. The book offers prudent practices designed to promote safety and includes practical information on assessing hazards, managing chemicals, disposing of wastes, and more. Prudent Practices in the Laboratory will continue to serve as the leading source of chemical safety guidelines for people working with laboratory chemicals: research chemists, technicians, safety officers, educators, and students.

Download or read book Chemical Laboratory Safety and Security written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2016-08-07 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt: The U.S. Department of State charged the Academies with the task of producing a protocol for development of standard operating procedures (SOPs) that would serve as a complement to the Chemical Laboratory Safety and Security: A Guide to Prudent Chemical Management and be included with the other materials in the 2010 toolkit. To accomplish this task, a committee with experience and knowledge in good chemical safety and security practices in academic and industrial laboratories with awareness of international standards and regulations was formed. The hope is that this toolkit expansion product will enhance the use of the previous reference book and the accompanying toolkit, especially in developing countries where safety resources are scarce and experience of operators and end-users may be limited.

Download or read book Challenges for Health and Safety in Higher Education and Research Organisations written by Olga Kuzmina and published by Royal Society of Chemistry. This book was released on 2020-11-19 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a summary of the main obstacles for creating and maintaining high standards of health and safety in higher education and research organisations. The obstacles include high staff turnover and an uncertain and constantly evolving research environment, small groups lacking unified management structure, deadline time pressures, restricted funding models and existing "old school" culture. Often the Health and Safety specialists and personnel managers in these organisations find themselves reiterating the same information, which gets lost as soon as the new cohort of workers arrives. Providing insight into methods of managing health and safety, training, and supervision, which help to build a strong and reliable health and safety system, this book is a collection of "best practices" from experienced safety professionals and researchers in Europe and the United States. These experiences demonstrate how health and safety professionals have overcome these issues and provide readers with ideas and models they can use in their own organisations. The information contained within is aimed at health and safety professionals and managers in universities and research organisations conducting scientific and engineering research with transient workers and students worldwide.

Download or read book Emergency Response and Hazardous Chemical Management written by Clyde B. Strong and published by CRC Press. This book was released on 2013-11-19 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: Management of hazardous chemicals and materials-particularly during emergency release situations-is a critical part of routine training required for workers and professionals in the chemical, petroleum and manufacturing industries. Proper storage of highly reactive chemical agents, correct choice of protective clothing and safety issues in confined

Download or read book Chemical Management written by Thomas J. Bierma and published by John Wiley & Sons. This book was released on 1999-11-15 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ein Umdenken bei Einkauf und Einsatz von Rohstoffen kann nicht nur die Produktionskosten, sondern auch den Schadstoffausstoß eines Prozesses drastisch senken! Die Autoren dieses Buches konzentrieren sich darauf, wie man Abfälle minimiert, statt sie kostenintensiv entsorgen zu müssen. Eine Reihe von Fallstudien zeigt Vorteile, Probleme und Fallstricke bei der Umsetzung der theoretischen Erkenntnisse in die Praxis. (12/99)

Download or read book Chemical Management in Textiles and Fashion written by Subramanian Senthilkannan Muthu and published by Woodhead Publishing. This book was released on 2020-10-14 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Management in Textiles and Fashion helps readers understand current pressures on the textile industry surrounding the responsible management of chemicals. The book was written in response to industrial movements like Greenpeace's Detox Campaign and Zero Discharge of Hazardous Chemicals, which have both helped to motivate retailers, manufacturers and regulatory bodies on this issue. Chapters cover the entire supply chain, taking into account the use of chemicals in processing, manufacturing and recycling garments. In addition to environmental sustainability, this valuable resource covers all the main aspects of chemical management, including chemical risk assessments, chemical management systems, and lifecycle assessment. While providing a survey of the latest regulations and standards on chemical management, this book also examines emerging green alternatives to help readers find innovative solutions for sustainable chemical processes. Covers all relevant regulations and certifications for chemical management in textiles Provides technical details on the hazardous chemicals often used in the textile industries Explores a range of safe alternatives Addresses chemical management throughout the textile supply chain

Download or read book Risk Assessment of Chemicals An Introduction written by C.J. van Leeuwen and published by Springer Science & Business Media. This book was released on 2007-09-18 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: At last – a second edition of this hugely important text that reflects the progress and experience gained in the last decade and aims at providing background and training material for a new generation of risk assessors. The authors offer an introduction to risk assessment of chemicals as well as basic background information on sources, emissions, distribution and fate processes for the estimation of exposure of plant and animal species in the environment and humans exposed via the environment, consumer products, and at the workplace. The coverage describes the basic principles and methods of risk assessment within their legislative frameworks (EU, USA, Japan and Canada).

Download or read book Chemical Management in Textiles and Fashion written by Subramanian Senthilkannan Muthu and published by Woodhead Publishing. This book was released on 2020-09-29 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Management in Textiles and Fashion helps readers understand current pressures on the textile industry surrounding the responsible management of chemicals. The book was written in response to industrial movements like Greenpeace's Detox Campaign and Zero Discharge of Hazardous Chemicals, which have both helped to motivate retailers, manufacturers and regulatory bodies on this issue. Chapters cover the entire supply chain, taking into account the use of chemicals in processing, manufacturing and recycling garments. In addition to environmental sustainability, this valuable resource covers all the main aspects of chemical management, including chemical risk assessments, chemical management systems, and lifecycle assessment. While providing a survey of the latest regulations and standards on chemical management, this book also examines emerging green alternatives to help readers find innovative solutions for sustainable chemical processes. - Covers all relevant regulations and certifications for chemical management in textiles - Provides technical details on the hazardous chemicals often used in the textile industries - Explores a range of safe alternatives - Addresses chemical management throughout the textile supply chain

Download or read book Emergency Planning written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2010-08-26 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over 40 papers and posters that share the latest practices in emergency planning related to fixed chemical, pharmaceutical, LNG, and petroleum facilities, storage facilities, transportation, and security.

Download or read book Introduction to Process Safety for Undergraduates and Engineers written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2016-06-27 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Familiarizes the student or an engineer new to process safety with the concept of process safety management Serves as a comprehensive reference for Process Safety topics for student chemical engineers and newly graduate engineers Acts as a reference material for either a stand-alone process safety course or as supplemental materials for existing curricula Includes the evaluation of SACHE courses for application of process safety principles throughout the standard Ch.E. curricula in addition to, or as an alternative to, adding a new specific process safety course Gives examples of process safety in design

Download or read book Prudent Practices in the Laboratory written by National Research Council and published by National Academies Press. This book was released on 1995-09-16 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume updates and combines two National Academy Press bestsellers--Prudent Practices for Handling Hazardous Chemicals in Laboratories and Prudent Practices for Disposal of Chemicals from Laboratories--which have served for more than a decade as leading sources of chemical safety guidelines for the laboratory. Developed by experts from academia and industry, with specialties in such areas as chemical sciences, pollution prevention, and laboratory safety, Prudent Practices for Safety in Laboratories provides step-by-step planning procedures for handling, storage, and disposal of chemicals. The volume explores the current culture of laboratory safety and provides an updated guide to federal regulations. Organized around a recommended workflow protocol for experiments, the book offers prudent practices designed to promote safety and it includes practical information on assessing hazards, managing chemicals, disposing of wastes, and more. Prudent Practices for Safety in Laboratories is essential reading for people working with laboratory chemicals: research chemists, technicians, safety officers, chemistry educators, and students.

Download or read book Chemical Regulation in the Middle East written by Michael S. Wenk and published by John Wiley & Sons. This book was released on 2018-07-19 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: A noted expert offers a guide to the complex chemical regulations in the Middle East region Chemical Regulation in the Middle East offers an essential guide to the patchwork of chemical regulatory programs and the complex system of permits and licenses that manage chemicals in the countries of the Middle East. The book explores the range of ministry, legislative, and other decrees that encompass pesticides, occupational safety and health, as well as safety data sheets and product labels that address regulation to widely-varying degrees. The author explores the Cooperation Council for the Arab States of the Gulf and reviews the key regulatory agencies and chemical substance regulations. The text outlines the pesticide regulations, occupational safety and health regulations, waste regulations and safety data sheets and labels in Bahrain, Egypt, Israel, Kuwait, Oman, Pakistan, Saudi Arabia, United Arab Emirates and Abu Dhabi. This important guide: Offers a compendium of the diverse range of chemical regulations in the countries of the Middle East Untangles the complex system of permits and licenses that are unique to the various countries in the Middle East Contains information based on the research and experience of a noted expert in the field Includes a review of the key regulatory agencies and chemical substance regulations of the Arab States of the Gulf Written for chemical organisations and professionals doing business in the Middle East, Chemical Regulation in the Middle East offers a must-have resource that details the unique chemical regulations in each country in the region.

Download or read book Introduction to Software for Chemical Engineers Second Edition written by Mariano Martín Martín and published by CRC Press. This book was released on 2019-06-06 with total page 959 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of Chemical Engineering and its link to computer science is in constant evolution and new engineers have a variety of tools at their disposal to tackle their everyday problems. Introduction to Software for Chemical Engineers, Second Edition provides a quick guide to the use of various computer packages for chemical engineering applications. It covers a range of software applications from Excel and general mathematical packages such as MATLAB and MathCAD to process simulators, CHEMCAD and ASPEN, equation-based modeling languages, gProms, optimization software such as GAMS and AIMS, and specialized software like CFD or DEM codes. The different packages are introduced and applied to solve typical problems in fluid mechanics, heat and mass transfer, mass and energy balances, unit operations, reactor engineering, process and equipment design and control. This new edition offers a wider view of packages including open source software such as R, Python and Julia. It also includes complete examples in ASPEN Plus, adds ANSYS Fluent to CFD codes, Lingo to the optimization packages, and discusses Engineering Equation Solver. It offers a global idea of the capabilities of the software used in the chemical engineering field and provides examples for solving real-world problems. Written by leading experts, this book is a must-have reference for chemical engineers looking to grow in their careers through the use of new and improving computer software. Its user-friendly approach to simulation and optimization as well as its example-based presentation of the software, makes it a perfect teaching tool for both undergraduate and master levels.

Download or read book Production Management of Chemical Industries written by Kiran R. Golwalkar and published by Springer. This book was released on 2016-02-08 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers all major areas of operation, pollution control, safety, modernization, diversification, and resource management for cost control in the industrial production of chemicals. The author details the importance of obtaining the right type of raw materials and equipment for maximum plant efficiency and discusses revival of plants that have been idle for long periods. He also presents important issues concerning product quality, energy recovery, safety, pollution control and improving profitability by proper management of resources. The book is ideal for shop floor engineers, middle level management, and owners of small- and medium-scale facilities in many countries as it serves as a guide for keeping the plant operations running in adverse situations, for reducing energy consumption; improving profitability, resource allocation, and workforce planning.

Download or read book Plant Guidelines for Technical Management of Chemical Process Safety written by American Institute of Chemical Engineers. Center for Chemical Process Safety and published by American Institute of Chemical Engineers. This book was released on 1992 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Produced by the Center for Chemical Process Safety (CCPS), this volume provides examples of management systems for chemical process safety programs that are currently in place or that have been successfully used at chemical plants. The guidelines are directed toward all those individuals who are res

Download or read book Guidelines for Risk Based Process Safety written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2011-11-30 with total page 759 pages. Available in PDF, EPUB and Kindle. Book excerpt: Guidelines for Risk Based Process Safety provides guidelines for industries that manufacture, consume, or handle chemicals, by focusing on new ways to design, correct, or improve process safety management practices. This new framework for thinking about process safety builds upon the original process safety management ideas published in the early 1990s, integrates industry lessons learned over the intervening years, utilizes applicable "total quality" principles (i.e., plan, do, check, act), and organizes it in a way that will be useful to all organizations - even those with relatively lower hazard activities - throughout the life-cycle of a company.

Download or read book Guidelines for Safe Automation of Chemical Processes written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2017-01-06 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides designers and operators of chemical process facilities with a general philosophy and approach to safe automation, including independent layers of safety. An expanded edition, this book includes a revision of original concepts as well as chapters that address new topics such as use of wireless automation and Safety Instrumented Systems. This book also provides an extensive bibliography to related publications and topic-specific information.