Download or read book Introduction To The Calculus of Variations And Its Applications written by Frederic Wan and published by Routledge. This book was released on 2017-10-19 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive text provides all information necessary for an introductory course on the calculus of variations and optimal control theory. Following a thorough discussion of the basic problem, including sufficient conditions for optimality, the theory and techniques are extended to problems with a free end point, a free boundary, auxiliary and inequality constraints, leading to a study of optimal control theory.
Download or read book Introduction to the Calculus of Variations and Control with Modern Applications written by John A. Burns and published by CRC Press. This book was released on 2013-08-28 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to the Calculus of Variations and Control with Modern Applications provides the fundamental background required to develop rigorous necessary conditions that are the starting points for theoretical and numerical approaches to modern variational calculus and control problems. The book also presents some classical sufficient conditions a
Download or read book Introduction to the Calculus of Variations written by Hans Sagan and published by Courier Corporation. This book was released on 2012-04-26 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a thorough understanding of calculus of variations and prepares readers for the study of modern optimal control theory. Selected variational problems and over 400 exercises. Bibliography. 1969 edition.
Download or read book An Introduction to the Calculus of Variations written by and published by . This book was released on 1950 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Calculus of Variations written by Charles R. MacCluer and published by Courier Corporation. This book was released on 2013-05-20 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: First truly up-to-date treatment offers a simple introduction to optimal control, linear-quadratic control design, and more. Broad perspective features numerous exercises, hints, outlines, and appendixes, including a practical discussion of MATLAB. 2005 edition.
Download or read book Calculus of Variations written by Hansjörg Kielhöfer and published by Springer. This book was released on 2018-01-25 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: This clear and concise textbook provides a rigorous introduction to the calculus of variations, depending on functions of one variable and their first derivatives. It is based on a translation of a German edition of the book Variationsrechnung (Vieweg+Teubner Verlag, 2010), translated and updated by the author himself. Topics include: the Euler-Lagrange equation for one-dimensional variational problems, with and without constraints, as well as an introduction to the direct methods. The book targets students who have a solid background in calculus and linear algebra, not necessarily in functional analysis. Some advanced mathematical tools, possibly not familiar to the reader, are given along with proofs in the appendix. Numerous figures, advanced problems and proofs, examples, and exercises with solutions accompany the book, making it suitable for self-study. The book will be particularly useful for beginning graduate students from the physical, engineering, and mathematical sciences with a rigorous theoretical background.
Download or read book An Introduction to the Calculus of Variations written by L.A. Pars and published by Courier Corporation. This book was released on 2013-12-10 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clear, rigorous introductory treatment covers applications to geometry, dynamics, and physics. It focuses upon problems with one independent variable, connecting abstract theory with its use in concrete problems. 1962 edition.
Download or read book The Calculus of Variations written by Bruce van Brunt and published by Springer Science & Business Media. This book was released on 2006-04-18 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: Suitable for advanced undergraduate and graduate students of mathematics, physics, or engineering, this introduction to the calculus of variations focuses on variational problems involving one independent variable. It also discusses more advanced topics such as the inverse problem, eigenvalue problems, and Noether’s theorem. The text includes numerous examples along with problems to help students consolidate the material.
Download or read book Calculus of Variations written by I. M. Gelfand and published by Courier Corporation. This book was released on 2012-04-26 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fresh, lively text serves as a modern introduction to the subject, with applications to the mechanics of systems with a finite number of degrees of freedom. Ideal for math and physics students.
Download or read book Introduction to the Calculus of Variations written by Bernard Dacorogna and published by World Scientific Publishing Company. This book was released on 2014-08-13 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: The calculus of variations is one of the oldest subjects in mathematics, and it is very much alive and still evolving. Besides its mathematical importance and its links to other branches of mathematics, such as geometry or differential equations, it is widely used in physics, engineering, economics and biology. This book serves both as a guide to the expansive existing literature and as an aid to the non-specialist — mathematicians, physicists, engineers, students or researchers — in discovering the subject's most important problems, results and techniques. Despite the aim of addressing non-specialists, mathematical rigor has not been sacrificed; most of the theorems are either fully proved or proved under more stringent conditions. In this new edition, several new exercises have been added. The book, containing a total of 119 exercises with detailed solutions, is well designed for a course at both undergraduate and graduate levels.
Download or read book A First Course in the Calculus of Variations written by Mark Kot and published by American Mathematical Society. This book was released on 2014-10-06 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended for a first course in the calculus of variations, at the senior or beginning graduate level. The reader will learn methods for finding functions that maximize or minimize integrals. The text lays out important necessary and sufficient conditions for extrema in historical order, and it illustrates these conditions with numerous worked-out examples from mechanics, optics, geometry, and other fields. The exposition starts with simple integrals containing a single independent variable, a single dependent variable, and a single derivative, subject to weak variations, but steadily moves on to more advanced topics, including multivariate problems, constrained extrema, homogeneous problems, problems with variable endpoints, broken extremals, strong variations, and sufficiency conditions. Numerous line drawings clarify the mathematics. Each chapter ends with recommended readings that introduce the student to the relevant scientific literature and with exercises that consolidate understanding.
Download or read book Introduction to the Fractional Calculus of Variations written by Agnieszka B Malinowska and published by World Scientific Publishing Company. This book was released on 2012-09-14 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This invaluable book provides a broad introduction to the fascinating and beautiful subject of Fractional Calculus of Variations (FCV). In 1996, FVC evolved in order to better describe non-conservative systems in mechanics. The inclusion of non-conservatism is extremely important from the point of view of applications. Forces that do not store energy are always present in real systems. They remove energy from the systems and, as a consequence, Noether's conservation laws cease to be valid. However, it is still possible to obtain the validity of Noether's principle using FCV. The new theory provides a more realistic approach to physics, allowing us to consider non-conservative systems in a natural way. The authors prove the necessary Euler–Lagrange conditions and corresponding Noether theorems for several types of fractional variational problems, with and without constraints, using Lagrangian and Hamiltonian formalisms. Sufficient optimality conditions are also obtained under convexity, and Leitmann's direct method is discussed within the framework of FCV. The book is self-contained and unified in presentation. It may be used as an advanced textbook by graduate students and ambitious undergraduates in mathematics and mechanics. It provides an opportunity for an introduction to FCV for experienced researchers. The explanations in the book are detailed, in order to capture the interest of the curious reader, and the book provides the necessary background material required to go further into the subject and explore the rich research literature.
Download or read book Calculus of Variations written by Filip Rindler and published by Springer. This book was released on 2018-06-20 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook provides a comprehensive introduction to the classical and modern calculus of variations, serving as a useful reference to advanced undergraduate and graduate students as well as researchers in the field. Starting from ten motivational examples, the book begins with the most important aspects of the classical theory, including the Direct Method, the Euler-Lagrange equation, Lagrange multipliers, Noether’s Theorem and some regularity theory. Based on the efficient Young measure approach, the author then discusses the vectorial theory of integral functionals, including quasiconvexity, polyconvexity, and relaxation. In the second part, more recent material such as rigidity in differential inclusions, microstructure, convex integration, singularities in measures, functionals defined on functions of bounded variation (BV), and Γ-convergence for phase transitions and homogenization are explored. While predominantly designed as a textbook for lecture courses on the calculus of variations, this book can also serve as the basis for a reading seminar or as a companion for self-study. The reader is assumed to be familiar with basic vector analysis, functional analysis, Sobolev spaces, and measure theory, though most of the preliminaries are also recalled in the appendix.
Download or read book Calculus of Variations With Applications to Physics and Engineering written by Robert Weinstock and published by Weinstock Press. This book was released on 2007-03 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is in two sections. the first part dealing with, background material, basic theorems and isoperimetric problems. The second part devoted to applications, geometrical optics, particle dynamics, he theory of elasticity, electrostatics, quantum mechanics and much more. Many of the earliest books, particularly those dating back to the 1900s and before, are now extremely scarce and increasingly expensive. We are republishing these classic works in affordable, high quality, modern editions, using the original text and artwork.
Download or read book A Primer on the Calculus of Variations and Optimal Control Theory written by Mike Mesterton-Gibbons and published by American Mathematical Soc.. This book was released on 2009 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: The calculus of variations is used to find functions that optimize quantities expressed in terms of integrals. Optimal control theory seeks to find functions that minimize cost integrals for systems described by differential equations. This book is an introduction to both the classical theory of the calculus of variations and the more modern developments of optimal control theory from the perspective of an applied mathematician. It focuses on understanding concepts and how to apply them. The range of potential applications is broad: the calculus of variations and optimal control theory have been widely used in numerous ways in biology, criminology, economics, engineering, finance, management science, and physics. Applications described in this book include cancer chemotherapy, navigational control, and renewable resource harvesting. The prerequisites for the book are modest: the standard calculus sequence, a first course on ordinary differential equations, and some facility with the use of mathematical software. It is suitable for an undergraduate or beginning graduate course, or for self study. It provides excellent preparation for more advanced books and courses on the calculus of variations and optimal control theory.
Download or read book Introduction to Differential Calculus written by Ulrich L. Rohde and published by John Wiley & Sons. This book was released on 2012-01-11 with total page 788 pages. Available in PDF, EPUB and Kindle. Book excerpt: Enables readers to apply the fundamentals of differential calculus to solve real-life problems in engineering and the physical sciences Introduction to Differential Calculus fully engages readers by presenting the fundamental theories and methods of differential calculus and then showcasing how the discussed concepts can be applied to real-world problems in engineering and the physical sciences. With its easy-to-follow style and accessible explanations, the book sets a solid foundation before advancing to specific calculus methods, demonstrating the connections between differential calculus theory and its applications. The first five chapters introduce underlying concepts such as algebra, geometry, coordinate geometry, and trigonometry. Subsequent chapters present a broad range of theories, methods, and applications in differential calculus, including: Concepts of function, continuity, and derivative Properties of exponential and logarithmic function Inverse trigonometric functions and their properties Derivatives of higher order Methods to find maximum and minimum values of a function Hyperbolic functions and their properties Readers are equipped with the necessary tools to quickly learn how to understand a broad range of current problems throughout the physical sciences and engineering that can only be solved with calculus. Examples throughout provide practical guidance, and practice problems and exercises allow for further development and fine-tuning of various calculus skills. Introduction to Differential Calculus is an excellent book for upper-undergraduate calculus courses and is also an ideal reference for students and professionals alike who would like to gain a further understanding of the use of calculus to solve problems in a simplified manner.
Download or read book Applied Calculus of Variations for Engineers written by Louis Komzsik and published by CRC Press. This book was released on 2018-09-03 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of the calculus of variations is to find optimal solutions to engineering problems whose optimum may be a certain quantity, shape, or function. Applied Calculus of Variations for Engineers addresses this important mathematical area applicable to many engineering disciplines. Its unique, application-oriented approach sets it apart from the theoretical treatises of most texts, as it is aimed at enhancing the engineer’s understanding of the topic. This Second Edition text: Contains new chapters discussing analytic solutions of variational problems and Lagrange-Hamilton equations of motion in depth Provides new sections detailing the boundary integral and finite element methods and their calculation techniques Includes enlightening new examples, such as the compression of a beam, the optimal cross section of beam under bending force, the solution of Laplace’s equation, and Poisson’s equation with various methods Applied Calculus of Variations for Engineers, Second Edition extends the collection of techniques aiding the engineer in the application of the concepts of the calculus of variations.
