Download or read book Introduction to Stainless Steels written by Jonathan Beddoes and published by ASM International(OH). This book was released on 1999 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed as a basic and introductory reference, this book not only addresses stainless steels in the light of their resistance to corrosion for which they are more commonly recognised, but also explains the wide range of other useful properties attributable to the various and specific categories of these alloys. This book is a concise, easy-to-read introduction to one of the most widely used industrial materials. Each chapter explains an important concept related to the selection, application, processing and use of stainless steels. This book is indexed and includes appendices: (1) Identification of Stainless Steels in Service (2) Toxicity of Stainless Steel (3) Table of Equivalent Designations (this is not intended to be complete, but includes the more commonly used stainless steels and the most widely used designation systems). First published in 1965 and updated in 1986, this third edition is a completely new text.
Download or read book Austenitic Stainless Steels written by Wojciech Borek and published by BoD – Books on Demand. This book was released on 2017-12-20 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stainless steel is still one of the fastest growing materials. Today, the austenitic stainless steel with the classic composition of 18% Cr and 8% Ni (grade 304L) is still the most widely used by far in the world. The unique characteristic of stainless steel arises from three main factors. The versatility results from high corrosion resistance, excellent low- and high-temperature properties, high toughness, formability, and weldability. The long life of stainless steels has been proven in service in a wide range of environments, together with low maintenance costs compared to other highly alloyed metallic materials. The retained value of stainless steel results from the high intrinsic value and easy recycling. Stainless steel, especially of austenitic microstructure, plays a crucial role in achieving sustainable development nowadays, so it is also important for further generations.
Download or read book Iron and Steel written by William F. Hosford and published by Cambridge University Press. This book was released on 2012-04-23 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended both as a resource for engineers and as an introduction to the layman about our most important metal system. After an introduction that deals with the history and refining of iron and steel, the rest of the book examines their physical properties and metallurgy. To elaborate on the importance of iron and steel, we can refer to the fact that modern civilization as we know it would not be possible without it. Steel is essential in the machinery necessary for manufacturing that meets our needs. Even the words themselves have come to suggest strength. Phrases such as 'iron willed', 'iron fisted', 'iron clad', 'iron curtain' and 'pumping iron' imply strength. A 'steely glance' is a stern look. 'A heart of steel' refers to a very hard demeanor. The Russian dictator, Stalin (which means steel in Russian), chose the name to invoke fear in those under him.
Download or read book Corrosion of Austenitic Stainless Steels written by H S Khatak and published by Woodhead Publishing. This book was released on 2002-10-14 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive study covers all types of corrosion of austenitic stainless steel. It also covers methods for detecting corrosion and investigating corrosion-related failure, together with guidelines for improving corrosion protection of steels. Details all types of corrosion of austenitic stainless steel Covers methods for detecting corrosion and investigating corrosion-related failure Outlines guidelines for improving corrosion protection of steels
Download or read book Duplex Stainless Steels written by Iris Alvarez-Armas and published by John Wiley & Sons. This book was released on 2013-01-16 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Duplex Stainless Steels (DSSs) are chromium-nickel-molybdenum-iron alloys that are usually in proportions optimized for equalizing the volume fractions of austenite and ferrite. Due to their ferritic-austenitic microstructure, they possess a higher mechanical strength and a better corrosion resistance than standard austenitic steels. This type of steel is now increasing its application and market field due to its very good properties and relatively low cost. This book is a review of the most recent progress achieved in the last 10 years on microstructure, corrosion resistance and mechanical strength properties, as well as applications, due to the development of new grades. Special attention will be given to fatigue and fracture behavior and to proposed models to account for mechanical behavior. Each subject will be developed in chapters written by experts recognized around the international industrial and scientific communities. The use of duplex stainless steels has grown rapidly in the last 10 years, particularly in the oil and gas industry, chemical tankers, pulp and paper as well as the chemical industry. In all these examples, topics like welding, corrosion resistance and mechanical strength properties (mainly in the fatigue domain) are crucial. Therefore, the update of welding and corrosion properties and the introduction of topics like texture effects, fatigue and fracture strength properties, and mechanical behavior modeling give this book specific focus and character.
Download or read book The History of Stainless Steel written by Harold M. Cobb and published by ASM International. This book was released on 2010-01-01 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: The History of Stainless Steel provides a fascinating glimpse into a vital material that we may take for granted today. Stainless steel, called "the miracle metal" and "the crowning achievement of metallurgy" by the prominent metallurgist Carl Zapffe, is a material marvel with an equally fascinating history of people, places, and technology. As stainless steel nears the hundredth anniversary of its discovery, The History of Stainless Steel by Harold Cobb is a fitting perspective on a vital material of our modern life. Aptly called the miracle metal by the renowned metallurgist Carl Zapffe, stainless steel is not only a metallurgical marvel, but its history provides an equally fascinating story of curiosity, competitive persistence, and entrepreneurial spirit. The History of Stainless Steel is the world's first book that captures the unfolding excitement and innovations of stainless steel pioneers and entrepreneurs. Many new insights are given into the work of famous pioneers like Harry Brearley, Elwood Haynes, and Benno Strauss, including significant technical contributions of lesser known figures like William Krivsky. This fascinating history of stainless steel exemplifies the great push of progress in the 20th Century. From the stainless steel cutlery of Brearley in 1913, stainless steel burst on the modern scene in many tangible ways. Excerpted text by William Van Alen, architect of the Chrysler Building, describes the early architectural use of stainless steel. Another historic application of stainless steel is the revolution in rail travel by the Edward G. Budd Company, which built the first light-weight stainless steel passenger trains--with an astounding 90% reduction in fuel costs. This remains recognized today as one of the technological marvels of the modern world. Harold Cobb, a metallurgist who has spent much of his career in the stainless steel industry, uncovers many interesting stories and insights, including a special perspective on the prominent role of stainless steel in the activities of emerging technical societies such as the American Society for Metals and the American Society for Testing and Materials. Amply illustrated and with a 78-page timeline, this publication truly evokes the inspirations created by and from stainless steel.
Download or read book Powder Metallurgy Stainless Steels written by Erhard Klar and published by ASM International. This book was released on 2007-01-01 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Stainless Steels for Design Engineers written by Michael F. McGuire and published by ASM International. This book was released on 2008 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rate of growth of stainless steel has outpaced that of other metals and alloys, and by 2010 may surpass aluminum as the second most widely used metal after carbon steel. The 2007 world production of stainless steel was approximately 30,000,000 tons and has nearly doubled in the last ten years. This growth is occurring at the same time that the production of stainless steel continues to become more consolidated. One result of this is a more widespread need to understand stainless steel with fewer resources to provide that information. The concurrent technical evolution in stainless steel and increasing volatility of raw material prices has made it more important for the engineers and designers who use stainless steel to make sound technical judgments about which stainless steels to use and how to use them.
Download or read book High Performance Stainless Steels written by Curtis W. Kovach and published by . This book was released on 2000 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Alloy Digest Sourcebook written by Joseph R. Davis and published by ASM International. This book was released on 2000-01-01 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference documents ferrous alloy development as presented in Alloy Digest since 1952. Its concise data sheet summaries (which run about two pages) provide material composition, properties, heat treatment, fabrication characteristics, product forms, and applications. Following a general overvie
Download or read book High Interstitial Stainless Austenitic Steels written by Hans Berns and published by Springer Science & Business Media. This book was released on 2012-11-08 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Interstitial Stainless Austenitic Steels is of interest to all engineers and resaerchers working with stainless steel, either at universities or R&D departments in Industry. The new applications described appeal to design engineers while procees engineers find interesting challenges. These novel steels enter more and more industrial applications. Their development is presented by this book in its entirety, starting from the electronic scale of components. This makes it particlularly attractive to Materials Scientists and Metal Physicists.
Download or read book Corrosion of Stainless Steels written by A. John Sedriks and published by John Wiley & Sons. This book was released on 1996-04-19 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Complete, Up-to-Date Introduction to Corrosion of StainlessSteels and Metallurgical Factors This fully updated Second Editionof Corrosion of Stainless Steels covers the tremendous advancesmade with stainless steels in recent decades, includingapplications in many new areas--from marine technologies andoff-shore oil production to power plants and the kitchen sink. Thisbook offers unique insights into the corrosion mechanisms affectingstainless steels, details problem-avoidance strategies, and helpsidentify corrosion-resistant capabilities for these remarkablealloys Sponsored by the Electrochemical Society, Corrosion osStainless Steels * Provides a comprehensive introduction to the selection,development, and production of all types of stainless steels * Emphasizes how metallurgical factors affect corrosionresistance * Examines the limitations of stainless steels within the contextof a discussion on higher alloys * Takes an interdisciplinary approach that demonstrates thecombined effects of metallurgy, chemistry, and electrochemistry oncorrosion resistance * Provides baseline knowledge and testing standards for stainlesssteels, and facilitates failure analysis for industrial purposes orlitigation related to equipment failure This is a much-needed text for materials scientists, chemicalengineers, corrosion specialists, graduate students, and anyone whoneeds to be brought up to date on this subject.
Download or read book Stainless Steels and Alloys written by Zoia Duriagina and published by BoD – Books on Demand. This book was released on 2019-02-13 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials science is the magic that allows us to change the chemical composition and microstructure of material to regulate its corrosion-mechanical, technological, and functional properties. Five major classes of stainless steels are widely used: ferritic, austenitic, martensitic, duplex, and precipitation hardening. Austenitic stainless steels are extensively used for service down to as low as the temperature of liquid helium (-269oC). This is largely due to the lack of a clearly defined transition from ductile to brittle fracture in impact toughness testing. Steels with ferritic or martensitic structures show a sudden change from ductile (safe) to brittle (unsafe) fracture over a small temperature difference. Even the best of these steels shows this behavior at temperatures higher than -100oC and in many cases only just below zero. Various types of stainless steel are used across the whole temperature range from ambient to 1100oC. This book will be useful to scientists, engineers, masters, graduate students, and students. I hope readers will enjoy this book and that it will serve to create new materials with unique properties.
Download or read book Metals Handbook written by Asm international. Handbook committee and published by . This book was released on 1990 with total page 1088 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Manufacturing and Application of Stainless Steels written by Andrea Di Schino and published by MDPI. This book was released on 2020-04-15 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stainless steels represent a quite interesting material family, both from a scientific and commercial point of view, following to their excellent combination in terms of strength and ductility together with corrosion resistance. Thanks to such properties, stainless steels have been indispensable for the technological progress during the last century and their annual consumption increased faster than other materials. They find application in all these fields requiring good corrosion resistance together with ability to be worked into complex geometries. Despite to their diffusion as a consolidated materials, many research fields are active regarding the possibility to increase stainless steels mechanical properties and corrosion resistance by grain refinement or by alloying by interstitial elements. At the same time innovations are coming from the manufacturing process of such a family of materials, also including the possibility to manufacture them starting from metals powder for 3D printing. The Special Issue scope embraces interdisciplinary work covering physical metallurgy and processes, reporting about experimental and theoretical progress concerning microstructural evolution during processing, microstructure-properties relations, applications including automotive, energy and structural.
Download or read book Stainless Steel written by Animesh Kumar Basak and published by Nova Science Pub Incorporated. This book was released on 2015-04-01 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stainless steel, termed as the "miracle metal" is all around us in numerous applications ranging from everyday household items to sophisticated biomedical applications. Stainless steel is one of the fastest growing segments in metal industries. New developments and a wide range of research on stainless steel is taking place all around the world in order to obtain superior quality stainless steel and expand its applications to meet growing demands. Taking those facts into account, this book is compiles recent developments in the properties, applications and further processing of stainless steel and recent research trends. The book includes high-tech characterisation techniques of stainless steel to address the decomposition behaviour; decomposition-induced transformation to the correlated property-microstructure; powder metallurgy to produce difficult-to-cast stainless steel components, depassivation / repassivation behaviour, various surface treatment processes as well as a wide range of machining techniques to address the need of machinability of stainless steel.
Download or read book Duplex Stainless Steels written by R Gunn and published by Woodhead Publishing. This book was released on 1997-10-21 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Two very successful conferences - in Glasgow and Beaune - were held on duplex stainless steels during the first half of the '90s. This book takes keynote papers from each, and develops and expands them to bring the topics right up to date. There is new material to cover grades, specifications and standards, and the book is fully cross-references and indexed. The first reference book to be published on the increasingly popular duplex stainless steels, it will be widely welcomed by metallurgists, design and materials engineers, oil and gas engineers and anyone involved in materials development and properties. The first reference book on this relatively new engineering material Based on keynote papers from major international contributors Covers grades, standards and specifications
