Download or read book Introduction to Sol Gel Processing written by Alain C. Pierre and published by Springer Nature. This book was released on 2020-03-10 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a broad, general introduction to the processing of Sol-Gel technologies. This updated volume serves as a general handbook for researchers and students entering the field. This new edition provides updates in fields that have undergone rapid developments, such as Ceramics, Catalysis, Chromatropgraphy, biomaterials, glass science, and optics. It provides a simple, compact resource that can also be used in graduate-level materials science courses.

Download or read book Introduction to Sol Gel Processing written by Alain C. Pierre and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: TO SOL-GEL PROCESSING by Alain c. Pierre Universite Claude-Bemard-Lyon 1 ~. SPRINGER SCIENCE+BUSINESS MEDIA, LLC " ISBN 978-0-7923-8121-1 ISBN 978-1-4615-5659-6 (eBook) DOl 10. 1007/978-1-4615-5659-6 Library of Congress Cataloging-in-Publication Data A C. I. P. Catalogue record for this book is available from the Library of Congress. Copyright© 1998 by Springer Science+Business Media New York Originally published by Kluwer Academic Publishers in 1998 Softcover reprint of the hardcover 1st edition 1998 Second Printing 2002. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, mechanical, photo copying, recording, or otherwise, without the prior written permission of the publisher, Springer Science+ Business Media, LLC Printed on acid-free paper. This printing is a digital duplication of the original edition. To Marie-Claude David and Valerie Kaolinite gel network. From K. Ma and A. Pierre - Unpublished photograph. TABLE OF CONTENT PREFACE ix 1 . GENERAL INTRODUCTION 1 l. l - Short history 1 1. 2 - Sols, gels and gelation 2 1. 3 - Outline of sol-gel processing 4 1. 4 - Recent developments 6 1. 5 - Advantages and limitations of sol-gel processing 6 1. 6 - Organization of the book 8 1. 7 - References 8 2 ·THE CHEMISTRY OF PRECURSORS SOLUTIONS 11 2. 1 - Introduction 11 2. 2 - Solvents 12 2. 3 - Basis of precursors transformations in solution 17 2. 4 - Metal salts solutions 24 2.

Download or read book Introduction to Sol Gel Processing written by Alain C. Pierre and published by Springer Science & Business Media. This book was released on 1998-03-31 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: TO SOL-GEL PROCESSING by Alain c. Pierre Universite Claude-Bemard-Lyon 1 ~. SPRINGER SCIENCE+BUSINESS MEDIA, LLC " ISBN 978-0-7923-8121-1 ISBN 978-1-4615-5659-6 (eBook) DOl 10. 1007/978-1-4615-5659-6 Library of Congress Cataloging-in-Publication Data A C. I. P. Catalogue record for this book is available from the Library of Congress. Copyright© 1998 by Springer Science+Business Media New York Originally published by Kluwer Academic Publishers in 1998 Softcover reprint of the hardcover 1st edition 1998 Second Printing 2002. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, mechanical, photo copying, recording, or otherwise, without the prior written permission of the publisher, Springer Science+ Business Media, LLC Printed on acid-free paper. This printing is a digital duplication of the original edition. To Marie-Claude David and Valerie Kaolinite gel network. From K. Ma and A. Pierre - Unpublished photograph. TABLE OF CONTENT PREFACE ix 1 . GENERAL INTRODUCTION 1 l. l - Short history 1 1. 2 - Sols, gels and gelation 2 1. 3 - Outline of sol-gel processing 4 1. 4 - Recent developments 6 1. 5 - Advantages and limitations of sol-gel processing 6 1. 6 - Organization of the book 8 1. 7 - References 8 2 ·THE CHEMISTRY OF PRECURSORS SOLUTIONS 11 2. 1 - Introduction 11 2. 2 - Solvents 12 2. 3 - Basis of precursors transformations in solution 17 2. 4 - Metal salts solutions 24 2.

Download or read book Sol Gel Science written by C. Jeffrey Brinker and published by Academic Press. This book was released on 2013-10-22 with total page 925 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sol-Gel Science: The Physics and Chemistry of Sol-Gel Processing presents the physical and chemical principles of the sol-gel process. The book emphasizes the science behind sol-gel processing with a chapter devoted to applications. The first chapter introduces basic terminology, provides a brief historical sketch, and identifies some excellent texts for background reading. Chapters 2 and 3 discuss the mechanisms of hydrolysis and condensation for nonsilicate and silicate systems. Chapter 4 deals with stabilization and gelation of sols. Chapter 5 reviews theories of gelation and examines the predicted and observed changes in the properties of a sol in the vicinity of the gel point. Chapter 6 describes the changes in structure and properties that occur during aging of a gel in its pore liquor (or some other liquid). The discussion of drying is divided into two parts, with the theory concentrated in Chapter 7 and the phenomenology in Chapter 8. The structure of dried gels is explored in Chapter 9. Chapter 10 shows the possibility of using the gel as a substrate for chemical reactions or of modifying the bulk composition of the resulting ceramic by performing a surface reaction (such as nitridation) on the gel. Chapter 11 reviews the theory and practice of sintering, describing the mechanisms that govern densification of amorphous and crystalline materials, and showing the advantages of avoiding crystallization before sintering is complete. The properties of gel-derived and conventional ceramics are discussed in Chapter 12. The preparation of films is such an important aspect of sol-gel technology that the fundamentals of film formation are treated at length in Chapter 13. Films and other applications are briefly reviewed in Chapter 14. Materials scientists and researchers in the field of sol-gel processing will find the book invaluable.

Download or read book Sol Gel Processing and Applications written by Y.A. Attia and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: During my professional career, I developed a strong interest in sol-gel technology, and worked on both xerogel and aerogel systems. My fascination with aerogels has driven me to explore their commercial potential, which is currently an important component of my company's business plan. Together with my co-workers, I have also worked on the preparation of controlled PZT and silica xerogels as well as thin film coatings of metals by the sol-gel technology, These experiences convinced me of the tremendous potentials of this technology. A conviction that is shared by many scientists, engineers, and business leaders around the globe. Many sol-gel derived products are already articles of commerce. However, to expand the commercial potential of sol-gel technology, two challenges must be met: (1) the quality of sol-gel derived products must continue to meet or exceed the quality of competing products, (2) the production cost of sol-gel products (specially aerogels) must continued to decline. A key to lowering the costs of sol-gel products is finding inexpensive precursors.

Download or read book Synthesis of Inorganic Materials written by Ulrich S. Schubert and published by John Wiley & Sons. This book was released on 2019-12-04 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduces readers to the field of inorganic materials, while emphasizing synthesis and modification techniques Written from the chemist's point of view, this newly updated and completely revised fourth edition of Synthesis of Inorganic Materials provides a thorough and pedagogical introduction to the exciting and fast developing field of inorganic materials and features all of the latest developments. New to this edition is a chapter on self-assembly and self-organization, as well as all-new content on: demixing of glasses, non-classical crystallization, precursor chemistry, citrate-gel and Pechini liquid mix methods, ice-templating, and materials with hierarchical porosity. Synthesis of Inorganic Materials, 4th Edition features chapters covering: solid-state reactions; formation of solids from the gas phase; formation of solids from solutions and melts; preparation and modification of inorganic polymers; self-assembly and self-organization; templated materials; and nanostructured materials. There is also an extensive glossary to help bridge the gap between chemistry, solid state physics and materials science. In addition, a selection of books and review articles is provided at the end of each chapter as a starting point for more in-depth reading. -Gives the students a thorough overview of the fundamentals and the wide variety of different inorganic materials with applications in research as well as in industry -Every chapter is updated with new content -Includes a completely new chapter covering self-assembly and self-organization -Written by well-known and experienced authors who follow an intuitive and pedagogical approach Synthesis of Inorganic Materials, 4th Edition is a valuable resource for advanced undergraduate students as well as masters and graduate students of inorganic chemistry and materials science.

Download or read book The Sol to Gel Transition written by Plinio Innocenzi and published by Springer. This book was released on 2016-06-23 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an in-depth introduction to the sol to gel transition in inorganic and hybrid organic-inorganic systems, one of the most important chemical-physical transitions and the basis of the sol-gel process. Familiarity with the fundamental chemistry and physics of this transition is essential for students in chemistry and materials science through academic and industry researchers working on sol-gel-related applications. The book features a didactic approach, using simple and clear language to explain the sol to gel transition and the accompanying processes. The text is also suitable for use in short courses and workshops for graduate students as well as professionals.

Download or read book Sol Gel Materials for Energy Environment and Electronic Applications written by Suresh C. Pillai and published by Springer. This book was released on 2017-02-16 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides expert coverage of the state-of-the-art in sol-gel materials for functional applications in energy, environment and electronics. The use of sol-gel technology has become a hotbed for cutting edge developments in many fields due to the accessibility of advanced materials through low energy processes. The book offers a broad view of this growing research area from basic science through high-level applications with the potential for commercialization and industrial use. Taking an integrated approach, expert chapters present a wide range of topics, from photocatalysts, solar cells and optics, to thin films and materials for energy storage and conversion, demonstrating the combined use of chemistry, physics, materials science and engineering in the search for solutions to some of the most challenging problems of our time.

Download or read book Sol Gel Method written by Guadalupe Valverde Aguilar and published by BoD – Books on Demand. This book was released on 2019-02-13 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: The sol-gel method is a powerful route of synthesis used worldwide. It produces bulk, nano- and mesostructured sol-gel materials, which can encapsulate metallic and magnetic nanoparticles, non-linear azochromophores, perovskites, organic dyes, biological molecules, etc.. This can have interesting applications for catalysis, photocatalysis; drug delivery for treatment of neurodegenerative diseases such as cancer, Parkinson's and Azheimer's. In this book, valuable contributions related to novel materials synthesized by the sol-gel route are provided. The effect of the sol-gel method to synthesize these materials with potential properties is described, and how the variation of the parameters during the synthesis influences their design and allows to adjust their properties according to the desired application is discussed.

Download or read book Sol Gel Materials written by John D. Wright and published by CRC Press. This book was released on 2018-10-03 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sol-Gel processing methods, first used historically for decorative and constructional materials, were extensively developed in the last century for applications such as glasses, ceramics, catalysts, coatings, composites and fibres. Today they are reaching their full potential, enabling the preparation of new generations of advanced materials not easily accessible by other methods yet using mild, low-energy conditions. The topic is therefore increasingly included in advanced undergraduate, MSc and PhD programmes in the areas of chemistry, physics and materials science. This concise introductory text, written at the advanced undergraduate/first-year postgraduate level, is also suitable as an introduction to the development, mechanisms, chemistry, characterisation methods and applications of the technique. It provides readers with an extensive yet concise grounding in the theory of each area of the subject and details the real and potential applications and the future prospects of sol-gel chemistry.

Download or read book Sol Gel Derived Optical and Photonic Materials written by Rui Almeida and published by Woodhead Publishing. This book was released on 2020-11-30 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sol-gel processing is a low temperature, low cost wet chemistry route to a range of different materials, particularly glassy and ceramic oxides, including nanoparticles and powders, fibers, thin films and membranes, or monoliths and composites. Thin films and coatings represent by far the most important category of sol-gel derived products with optical, electronic and magnetic functionalities, for example photoresist and dielectric spin-on-glass layers, flat screen displays, anti-reflection, conducting and magnetic disk coatings, as well as photochromic, electrochromic and photovoltaic coatings. Sol-gel derived materials are homogeneous at the molecular level and are a good example of a bottom-up approach to materials synthesis. There is increasing need of new optical and photonic materials with improved performance, where molecular level homogeneity and easy fabrication in film form may be especially convenient, highlighting a decisive advantage of sol-gel over other more established technologies to obtain graded index optical components, solar control coatings, phosphors, glass ceramics or multilayer photonic structures. There is no book available yet which focuses in particular on optical and photonic sol-gel derived materials. This is what makes this book unique at this point for those especially or exclusively interested in optical and photonic functional materials and applications. This book represents an important tool to update scientists and engineers with recent advances in the rapidly evolving field of optical and photonic materials, components and devices. Our target audience are those working in materials science, physics, engineering and chemistry disciplines, in particular academics and researchers working in advanced optical/photonic processing technologies, research and development engineers in high technology industries and research project leaders. This book will also be an essential tool for graduate students pursuing a PhD or even a Master's degree.

Download or read book Sol Gel Nanocomposites written by Massimo Guglielmi and published by Springer. This book was released on 2016-09-03 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides comprehensive coverage of nanocomposite materials obtained by the sol-gel method, from synthesis to applications and including design tools for combining different properties. Sol-gel nanocomposites are of great interest in meeting processing and application requirements for the development of multifunctional materials. These materials are already commercialized for a number of applications from scratch-resistant and anti-adhesive coatings to optical materials with active and passive properties. Biomedical applications, holographic recordings, fuel cells and hydrogen storage, resists and catalysts are among the potential uses. The novel mechanical, optical and electronic properties of nanocomposite materials depend not only on the individual component materials, but also on their morphology and nanoscale interfacial characteristics. Sol-gel is a highly versatile method for obtaining both the matrix and the filler of the nanocomposite and for chemically adjusting the interface to optimize structure and properties. Although nanocomposites are widely discussed in the literature, the focus has been mainly on polymer nanocomposites. This book addresses nanocomposites based on inorganic or hybrid organic-inorganic matrices, with an emphasis on the scientific principles which are the basis for nanocomposite sol-gel synthesis and applications. A didactic approach is followed, with different topics developed from a fundamental point of view together with key examples and case studies. First comprehensive treatment of nanocomposites obtained by sol-gel methods Focuses on nanocomposites with inorganic and hybrid organic-inorganic matrices Describes design tools to optimize structure and properties for various applications Covers synthesis, processing, characterization, and modeling Uses first principles to describe the influence of interfacial characteristics on materials properties Presents case studies for both films and bulk applications Provides examples of products on the market, with descriptions of the scientific principles at the base of their success Includes contributions from recognized leaders in this multidisciplinary area.

Download or read book Preparation of Catalysts VII written by R. Maggi and published by Elsevier. This book was released on 1998-08-17 with total page 1007 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings of the VIIth International Symposium on the Scientific Bases for the Preparation of Heterogeneous Catalysts, are in line with the general scope of this series of events. Emphasis in all Symposia has been on the scientific aspects of the preparation of new and industrial catalysts, or on new methods of preparation, rather than on the catalytic reactions in which such solids are ultimately used. In the present context, the catalytic event itself has only been considered as another, though often decisive, method of catalyst characterization.

Download or read book The Sol Gel Handbook written by David Levy and published by John Wiley & Sons. This book was released on 2015-08-28 with total page 1616 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive three-volume handbook brings together a review of the current state together with the latest developments in sol-gel technology to put forward new ideas. The first volume, dedicated to synthesis and shaping, gives an in-depth overview of the wet-chemical processes that constitute the core of the sol-gel method and presents the various pathways for the successful synthesis of inorganic and hybrid organic-inorganic materials, bio- and bio-inspired materials, powders, particles and fibers as well as sol-gel derived thin films, coatings and surfaces. The second volume deals with the mechanical, optical, electrical and magnetic properties of sol-gel derived materials and the methods for their characterization such as diffraction methods and nuclear magnetic resonance, infrared and Raman spectroscopies. The third volume concentrates on the various applications in the fields of membrane science, catalysis, energy research, biomaterials science, biomedicine, photonics and electronics.

Download or read book Metal Oxide Nanoparticles in Organic Solvents written by Markus Niederberger and published by Springer Science & Business Media. This book was released on 2009-09-17 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide Nanoparticles in Organic Solvents discusses recent advances in the chemistry involved for the controlled synthesis and assembly of metal oxide nanoparticles, the characterizations required by such nanoobjects, and their size and shape depending properties. In the last few years, a valuable alternative to the well-known aqueous sol-gel processes was developed in the form of nonaqueous solution routes. Metal Oxide Nanoparticles in Organic Solvents reviews and compares surfactant- and solvent-controlled routes, as well as providing an overview of techniques for the characterization of metal oxide nanoparticles, crystallization pathways, the physical properties of metal oxide nanoparticles, their applications in diverse fields of technology, and their assembly into larger nano- and mesostructures. Researchers and postgraduates in the fields of nanomaterials and sol-gel chemistry will appreciate this book’s informative approach to chemical formation mechanisms in relation to metal oxides.

Download or read book Sol Gel Technologies for Glass Producers and Users written by Michel Andre Aegerter and published by Springer Science & Business Media. This book was released on 2013-03-19 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sol-Gel Techniques for Glass Producers and Users provides technological information, descriptions and characterizations of prototypes, or products already on the market, and illustrates advantages and disadvantages of the sol-gel process in comparison to other methods. The first chapter entitled "Wet Chemical Technology" gives a summary of the basic principles of the sol-gel chemistry. The most promising applications are related to coatings. Chapter 2 describes the various "Wet Chemical Coating Technologies" from glass cleaning to many deposition and post-coating treatment techniques. These include patterning of coatings through direct or indirect techniques which have became very important and for which the sol-gel processing is particularly well adapted. Chapter 3 entitled "Bulk Glass Technologies" reports on the preparation of special glasses for different applications. Chapter 4 entitled "Coatings and Materials Properties" describes the properties of the different coatings and the sol-gel materials, fibers and powders. The chapter also includes a section dedicated to the characterization techniques especially applied to sol-gel coatings and products.

Download or read book Sol Gel Optics written by Lisa C. Klein and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sol--Gel--Optics encompasses numerous schemes for fabricating optical materials from gels -- materials such as bulk optics, optical waveguides, doped oxides for laser and nonlinear optics, gradient refractive index (GRIN) optics, chemical sensors, environmental sensors, and `smart' windows. Sol--Gel--Optics: Processing and Applications provides in-depth coverage of the synthesis and fabrication of these materials and discusses the optics related to microporous, amorphous, crystalline and composite materials. The reader will also find in this book detailed descriptions of new developments in silica optics, bulk optics, waveguides and thin films. Various applications to sensor and device technology are highlighted. For researchers and students looking for novel optical materials, processing methods or device ideas, Sol--Gel--Optics: Processing and Applications surveys a wide array of promising new avenues for further investigation and for innovative applications. (This book is the first in a new subseries entitled `Electronic Materials: Science and Technology).