Download or read book Introduction to Polymer Spectroscopy written by W. Klöpffer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has grown out of several courses oflectures held at the University of Mainz in the years 1978 to 1981, at the Ecole Poly technique Federal, Lausanne, and at the University of Fribourg, Switzerland. The last two courses were held in the framework of the "3e Cycle" lectures in June 1981. According to this genesis, the emphasis of the book lies on a unified and concise approach to introducing polymer spectroscopy rather than on completeness which, by the way, could hardly be achieved in a single volume. In contrast to other books on this subject, equal weight is given to electronic spectroscopy, vibrational spectroscopy and spin resonance techniques. The electronic properties of polymers have been increasingly investigated in the last ten years; until recently, however, these studies and the spectroscopic methods applied have not generally been considered as part of polymer spectroscopy. The increasing use of electronic spectroscopy by polymer researchers, on the other hand, shows that this type of spectroscopy provides efficient tools for gaining insight into the properties of polymers which cannot be obtained by any other means.
Download or read book Spectroscopy of Polymers written by J.L. Koenig and published by Elsevier. This book was released on 1999-09-16 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revised and updated Second Edition of the best-selling reference/text is essential reading for students and scientists who seek a thorough and practical introduction to the field of polymer spectroscopy. Eleven chapters cover the fundamental aspects and experimental applications of the primary spectroscopic methods. The advantages and disadvantages of the various techniques for particular polymer systems are also discussed. The goal of the author is not to make the reader an expert in the field, but rather to provide enough information about the different spectroscopic methods that the reader can determine how the available techniques can be used to solve a particular polymer problem. This Second Edition contains new and updated information on techniques in IR and NMR, as well as an all-new chapter on Mass Spectrometry.
Download or read book Introduction to Polymer Spectroscopy written by Walter Klöpffer and published by . This book was released on 1984 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Spectroscopic Techniques for Polymer Characterization written by Yukihiro Ozaki and published by John Wiley & Sons. This book was released on 2021-10-29 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: An insightful exploration of cutting-edge spectroscopic techniques in polymer characterization In Spectroscopic Techniques for Polymer Characterization: Methods, Instrumentation, Applications, a team of distinguished chemists delivers a comprehensive exploration of the vast potential of spectroscopic characterization techniques in polymer research. The book offers a concise outline of the principles, advantages, instrumentation, experimental techniques, and noteworthy applications of cutting-edge spectroscopy. Covering a wide range of polymers, from nylon to complex polymeric nanocomposites, the author presents recent developments in polymer science to polymer, analytical, and material chemists, assisting them in keeping track of the progress in modern spectroscopy. Spectroscopic Techniques for Polymer Characterization contains contributions from pioneers in modern spectroscopic techniques from around the world. The included materials bridge the gap between spectroscopists, polymer scientists, and engineers in academia and industry. The book also offers: A thorough introduction to the progress in spectroscopic techniques, including polymer spectroscopy and near-infrared spectroscopy Comprehensive explorations of topical polymers studied by spectroscopy, including polymer thin films, fluoropolymers, polymer solutions, conductive polymers Practical discussions of infrared imaging, near-infrared imaging, two-dimensional correlation spectroscopy, and far-ultraviolet spectroscopy In-depth examinations of spectroscopic studies of weak hydrogen bonding in polymers Spectroscopic Techniques for Polymer Characterization: Methods, Instrumentation, Applications is a must-read reference for polymer, analytical, and physical chemists, as well as materials scientists and spectroscopists seeking a one-stop resource for polymer characterization using spectroscopic analyses.
Download or read book NMR Spectroscopy of Polymers written by Tatsuki Kitayama and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the authors ́ extensive experimental experience, NMR Spectroscopy of Polymers explains the practical use of NMR spectroscopy in polymer chemistry.
Download or read book Polymer Spectroscopy written by A. H. Fawcett and published by John Wiley & Sons. This book was released on 1996-04-11 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exploring the importance of spectroscopy to polymer characterization, this volume provides an overview of such techniques as NMR imaging, Raman spectroscopy, ESR spectroscopy, and light and neutron scattering. The contribution each method has made to the development of polymer science is stressed.
Download or read book Spectroscopy of Polymer Nanocomposites written by Sabu Thomas and published by William Andrew. This book was released on 2016-02-16 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spectroscopy of Polymer Nanocomposites covers all aspects of the spectroscopic characterization of polymer nanocomposites. More than 25 spectroscopy characterization techniques – almost all used in materials science – are treated in the book, with discussion of their potentialities and limitations. By comparing the techniques with each other and presenting the techniques together with their specific application areas, the book provides scientists and engineers the information needed for solving specific problems and choosing the right technique for analyzing the material structure. From this, the dispersion structure of fillers, property relations and filler-polymer interactions can be determined, and, ultimately, the right materials can be chosen for the right applications. Besides the techniques and structure-property relations, aspects covered include: phase segregation of filler particles, filler agglomeration and deagglomeration, filler dispersion, filler-polymer interactions, surfaces and interfaces. The book also examines recent developments, as well as unresolved issues and new challenges, in the characterization of surfaces and interfaces in polymer nanocomposites. This handpicked selection of topics, and the combined expertise of contributors from industry, academia, government and private research organizations across the globe, make this survey an outstanding reference source for anyone involved in the field of polymer nanocomposites in academia or industry. - Provides comprehensive coverage of spectroscopy techniques for analyzing polymer nanocomposites - Enables researchers and engineers to choose the right technique and make better materials decisions in research and a range of industries - Presents the fundamentals, information on structure-property relations, and all other aspects relevant for understanding spectroscopic analyses of nanoreinforced polymers and their applications
Download or read book Spectroscopic Techniques for Polymer Characterization written by Yukihiro Ozaki and published by John Wiley & Sons. This book was released on 2022-03-14 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: An insightful exploration of cutting-edge spectroscopic techniques in polymer characterization In Spectroscopic Techniques for Polymer Characterization: Methods, Instrumentation, Applications, a team of distinguished chemists delivers a comprehensive exploration of the vast potential of spectroscopic characterization techniques in polymer research. The book offers a concise outline of the principles, advantages, instrumentation, experimental techniques, and noteworthy applications of cutting-edge spectroscopy. Covering a wide range of polymers, from nylon to complex polymeric nanocomposites, the author presents recent developments in polymer science to polymer, analytical, and material chemists, assisting them in keeping track of the progress in modern spectroscopy. Spectroscopic Techniques for Polymer Characterization contains contributions from pioneers in modern spectroscopic techniques from around the world. The included materials bridge the gap between spectroscopists, polymer scientists, and engineers in academia and industry. The book also offers: A thorough introduction to the progress in spectroscopic techniques, including polymer spectroscopy and near-infrared spectroscopy Comprehensive explorations of topical polymers studied by spectroscopy, including polymer thin films, fluoropolymers, polymer solutions, conductive polymers Practical discussions of infrared imaging, near-infrared imaging, two-dimensional correlation spectroscopy, and far-ultraviolet spectroscopy In-depth examinations of spectroscopic studies of weak hydrogen bonding in polymers Spectroscopic Techniques for Polymer Characterization: Methods, Instrumentation, Applications is a must-read reference for polymer, analytical, and physical chemists, as well as materials scientists and spectroscopists seeking a one-stop resource for polymer characterization using spectroscopic analyses.
Download or read book Introduction to Polymers written by Robert J. Young and published by Springer. This book was released on 1991 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on polymers, this edition aims to explore aspects of their chemistry, structure and mechanical properties. New topics discussed include ring-opening polymerization, special methods of polmerization, dynamic light scattering, small angle X-ray and neutron scattering.
Download or read book Introduction to Polymers written by Robert J. Young and published by CRC Press. This book was released on 2011-06-27 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thoroughly updated, Introduction to Polymers, Third Edition presents the science underpinning the synthesis, characterization and properties of polymers. The material has been completely reorganized and expanded to include important new topics and provide a coherent platform for teaching and learning the fundamental aspects of contemporary polymer
Download or read book Polymer Characterization written by Dan Campbell and published by CRC Press. This book was released on 2000-09-28 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discerning the properties of polymers and polymer-based materials requires a good understanding of characterization. This revised and updated text provides a comprehensive survey of characterization methods within its simple, concise chapters. Polymer Characterization: Physical Techniques, provides an overview of a wide variety of characterization methods, which makes it an excellent textbook and reference. It starts with a description of basic polymer science, providing a solid foundation from which to understand the key physical characterization techniques. The authors explain physical principles without heavy theory and give special emphasis to the application of the techniques to polymers, with plenty of illustrations. Topics covered include molecular weight determination, molecular and structural characterization by spectroscopic techniques, morphology and structural characterization by microscopy and diffraction, and thermal analysis. This edition contains a new chapter on surface analysis as well as some revised problems and solutions. The concise treatment of each topic offers even those with little prior knowledge of the subject an accessible source to relevant, simple descriptions in a well-organized format.
Download or read book NMR Spectroscopy and Polymer Microstructure written by Alan E. Tonelli and published by Wiley-VCH. This book was released on 1989 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes both high resolution solution and solid state techniques; presents applications to synthetic and biological polymers; demonstrates the connection between microstructures, conformations, and NMR spectra of polymers. Annotation copyrighted by Book News, Inc., Portland, OR
Download or read book Spectroscopy of Polymers written by Jack L. Koenig and published by . This book was released on 1999 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Polymer Synthesis Characterization and Processing written by Enrique Saldivar-Guerra and published by John Wiley & Sons. This book was released on 2013-02-28 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering a broad range of polymer science topics, Handbook of Polymer Synthesis, Characterization, and Processing provides polymer industry professionals and researchers in polymer science and technology with a single, comprehensive handbook summarizing all aspects involved in the polymer production chain. The handbook focuses on industrially important polymers, analytical techniques, and formulation methods, with chapters covering step-growth, radical, and co-polymerization, crosslinking and grafting, reaction engineering, advanced technology applications, including conjugated, dendritic, and nanomaterial polymers and emulsions, and characterization methods, including spectroscopy, light scattering, and microscopy.
Download or read book Polymer Physics written by U.W. Gedde and published by Springer Science & Business Media. This book was released on 2013-12-11 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the result of my teaching efforts during the last ten years at the Royal Institute of Technology. The purpose is to present the subject of polymer physics for undergraduate and graduate students, to focus the fundamental aspects of the subject and to show the link between experiments and theory. The intention is not to present a compilation of the currently available literature on the subject. Very few reference citations have thus been made. Each chapter has essentially the same structure: starling with an introduction, continuing with the actual subject, summarizing the chapter in 30D-500 words, and finally presenting problems and a list of relevant references for the reader. The solutions to the problems presented in Chapters 1-12 are given in Chapter 13. The theme of the book is essentially polymer science, with the exclusion of that part dealing directly with chemical reactions. The fundamentals in polymer science, including some basic polymer chemistry, are presented as an introduction in the first chapter. The next eight chapters deal with different phenomena (processes) and states of polymers. The last three chapters were written with the intention of making the reader think practically about polymer physics. How can a certain type of problem be solved? What kinds of experiment should be conducted? This book would never have been written without the help of my friend and adviser, Dr Anthony Bristow, who has spent many hours reading through the manuscript. criticizing the content.
Download or read book Polymer Analysis written by Barbara H. Stuart and published by John Wiley & Sons. This book was released on 2008-04-30 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the techniques used for the analysis of polymers. It covers the main aspects of polymer science and technology; identification, polymerization, molecular weight, structure, surface properties, degradation and mechanical properties. * Clear explanations of each analytical technique * Describes the application of techniques to the study of polymers * Encourages learning through numerous self-assessment questions and answers * Structured for flexible learning
Download or read book Introduction to Polymers Third Edition written by Robert J. Young and published by CRC Press. This book was released on 2011-06-27 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thoroughly updated, Introduction to Polymers, Third Edition presents the science underpinning the synthesis, characterization and properties of polymers. The material has been completely reorganized and expanded to include important new topics and provide a coherent platform for teaching and learning the fundamental aspects of contemporary polymer science. New to the Third Edition Part I This first part covers newer developments in polymer synthesis, including ‘living’ radical polymerization, catalytic chain transfer and free-radical ring-opening polymerization, along with strategies for the synthesis of conducting polymers, dendrimers, hyperbranched polymers and block copolymers. Polymerization mechanisms have been made more explicit by showing electron movements. Part II In this part, the authors have added new topics on diffusion, solution behaviour of polyelectrolytes and field-flow fractionation methods. They also greatly expand coverage of spectroscopy, including UV visible, Raman, infrared, NMR and mass spectroscopy. In addition, the Flory–Huggins theory for polymer solutions and their phase separation is treated more rigorously. Part III A completely new, major topic in this section is multicomponent polymer systems. The book also incorporates new material on macromolecular dynamics and reptation, liquid crystalline polymers and thermal analysis. Many of the diagrams and micrographs have been updated to more clearly highlight features of polymer morphology. Part IV The last part of the book contains major new sections on polymer composites, such as nanocomposites, and electrical properties of polymers. Other new topics include effects of chain entanglements, swelling of elastomers, polymer fibres, impact behaviour and ductile fracture. Coverage of rubber-toughening of brittle plastics has also been revised and expanded. While this edition adds many new concepts, the philosophy of the book remains unchanged. Largely self-contained, the text fully derives most equations and cross-references topics between chapters where appropriate. Each chapter not only includes a list of further reading to help readers expand their knowledge of the subject but also provides problem sets to test understanding, particularly of numerical aspects.
