Download or read book Introduction to Paint Chemistry and principles of paint technology Fourth Edition written by John Bentley and published by CRC Press. This book was released on 1997-09-25 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work provides a comprehensive introduction to paint technology supported by the relevant aspects of chemistry and physics. It covers the basic science and is devoted to paint composition, formulation and drying mechanisms, paint ingredients such as solvents, pigments and additives, and the different paint groups by chemical type. Throughout the book the authors emphasize the factors which govern the choice of a particular paint for a particular job. This new edition has been thoroughly revised to modernize and clarify the text. Areas of new development have been added including environmental impacts, safety issues and modern paint making techniques. Nomenclature and units have also been updated and a glossary of technical terms added. This book should be of interest as a course text for paint technology students and technical staff concerned with the paint industry.
Download or read book Introduction to Paint Chemistry and Principles of Paint Technology written by G. P. A. Turner and published by . This book was released on 2014-09-01 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Paint Chemistry and Principles of Paint Technology written by G. P. Turner and published by Springer. This book was released on 1988-04-15 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Paint Chemistry was first published in 1967 with~he intention of providing both a textbook for students and an introduction to the subject for those with little or no technical knowledee. This remains the objective. The book was completely revised in 1980, but the pace of change continued to quicken. In this third edition, I have sought to bring it up to date with the newest developments in the technology and, with an additional chapter, to emphasize the importance of the painting system as a composite, in which the substrate and its chemistry playa vital role. The book is divided into two parts. Part One begins at the very basis of matter-its atomic structure-and works step by step through a sufficient selection of chemistry and physics to allow any interested reader to cope with the chemistry and the technology of paint in Part Two. The reader should absorb as much of Part One as he or she feels necessary. It is worth noting, however, that the topics in it are specially selected from a paint point of view and that, for example, detail on oils in Chapter 3, on polymers in Chapter 5 and on light and colour in Chapter 6 could well be missing in some Chemistry degree courses.
Download or read book Introduction to Paint Chemistry written by Gerald Patrick Anthony Turner and published by . This book was released on 1980 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Conservation of Easel Paintings written by Joyce Hill Stoner and published by Routledge. This book was released on 2020-11-30 with total page 1367 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conservation of Easel Paintings, Second Edition provides a much-anticipated update to the previous edition, which has come to be known internationally as an invaluable and comprehensive text on the history, philosophy and methods of the treatment of easel paintings. Including 49 chapters written by more than 90 respected authors from around the world, this volume offers the necessary background knowledge in technical art history, artists’ materials and scientific methods of examination and documentation. Later sections of the book provide information about the varying approaches and methods for treatment and issues of preventive conservation, as well as valuable reflections on storage, shipping, and exhibition. Including exciting developments that have taken place since the last edition was published, the book also covers new techniques of examination, especially MacroXRF scanning and Reflectance Transmission Imagery. Drawing on research presented at recent professional conferences, information about innovative methods for cleaning modern and contemporary paintings and insights into modern oil paints is also included. Incorporating the latest regulations and understanding of health and safety practices and integrating theory with practice throughout, Conservation of Easel Paintings, Second Edition will continue to be an indispensable reference for practicing conservators. It will also be an essential resource for students taking conservation courses around the world.
Download or read book The Conservation of Easel Paintings written by Joyce Hill Stoner and published by Routledge. This book was released on 2012 with total page 917 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conservation of Easel Paintings is the first comprehensive text on the history, philosophy and methods of treatment of easel paintings integrating theory with practice. A guide to necessary background knowledge in technical art history, artists " materials, interviews with artists, scientific methods of examination and documentation precedes sections that present varying approaches and methods for treatment. This book concludes with the history and treatment of frames and a section featuring issues of preventive conservation, storage, shipping, exhibition, display, wall colours, and lighting. Extensive bibliographies at the end of each section point readers to additional resources. Conservation of Easel Paintings will be of use in the training of conservation students and will provide generations of practicing paintings conservators and interested art historians, curators, directors, collectors, dealers, artists, and students of art and art history with valuable information.
Download or read book Principles of Polymer Systems Sixth Edition written by Ferdinand Rodriguez and published by CRC Press. This book was released on 2014-12-09 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maintaining a balance between depth and breadth, the Sixth Edition of Principles of Polymer Systems continues to present an integrated approach to polymer science and engineering. A classic text in the field, the new edition offers a comprehensive exploration of polymers at a level geared toward upper-level undergraduates and beginning graduate students. Revisions to the sixth edition include: A more detailed discussion of crystallization kinetics, strain-induced crystallization, block copolymers, liquid crystal polymers, and gels New, powerful radical polymerization methods Additional polymerization process flow sheets and discussion of the polymerization of polystyrene and poly(vinyl chloride) New discussions on the elongational viscosity of polymers and coarse-grained bead-spring molecular and tube models Updated information on models and experimental results of rubber elasticity Expanded sections on fracture of glassy and semicrystalline polymers New sections on fracture of elastomers, diffusion in polymers, and membrane formation New coverage of polymers from renewable resources New section on X-ray methods and dielectric relaxation All chapters have been updated and out-of-date material removed. The text contains more theoretical background for some of the fundamental concepts pertaining to polymer structure and behavior, while also providing an up-to-date discussion of the latest developments in polymerization systems. Example problems in the text help students through step-by-step solutions and nearly 300 end-of-chapter problems, many new to this edition, reinforce the concepts presented.
Download or read book House Paints 1900 1960 written by Harriet A. L. Standeven and published by Getty Publications. This book was released on 2011 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: The versatility of modern commercial house paints has ensured their use in a broad range of applications, including the protection and decoration of historic buildings, the coating of toys and furniture, and the creation of works of art. Historically, house paints were based on naturally occurring oils, gums, resins, and proteins, but in the early twentieth century, the introduction of synthetic resins revolutionized the industry. Good quality ready-mixed products became available and were used by artists worldwide. While the ubiquity of commercial paints means that conservators are increasingly called upon to preserve them, such paints pose unique challenges including establishing exactly which materials are present. This book traces the history of the household paint industry in the United States and United Kingdom over the first half of the twentieth century. It includes chapters on the artistic use of commercial paints and the development of ready-mixed paints and synthetic resins; oil paints, oleoresinous gloss and enamel paints, water paints, nitrocellulose lacquers, oil-modified alkyds, and emulsion paints; and the conservation implications of these materials. The book will be of interest to conservators and conservation scientists working on a broad range of painted surfaces, as well as curators, art historians, and historians of architectural paint.
Download or read book Emulsions and Emulsion Stability written by Johan Sjoblom and published by CRC Press. This book was released on 2005-11-21 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emulsions and Emulsion Stability, Second Edition provides comprehensive coverage of both theoretical and practical aspects of emulsions. The book presents fundamental concepts and processes in emulsified systems, such as flocculation, coalescence, stability, precipitation, deposition, and the evolution of droplet size distribution. The bo
Download or read book Paint and Surface Coatings written by R Lambourne and published by Elsevier. This book was released on 1999-08-23 with total page 799 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of an established and well received book has been carefully revised, in many instances by the original authors, and enlarged by the addition of two completely new chapters. These deal with the use of computers in the paint industry and with the increasingly important subject of health and safety. The chapter on pigments has also been re-written by an author new to this edition. It was the editor’s intention in the first edition to provide science graduates entering the paint industry with a bridge between academia and the applied science and technology of paints. The great strength and appeal of this book remains that it deals with the technology of paints and surface coatings while also providing a basic understanding of the chemistry and physics of coatings. Extensive revision of first edition New chapter on computers and modelling New chapter on health and safety
Download or read book European Coatings Handbook written by Thomas Brock and published by Vincentz Network GmbH & Co KG. This book was released on 2000 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Urban Pollution and Changes to Materials and Building Surfaces written by Peter Brimblecombe and published by World Scientific. This book was released on 2015-11-23 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pollution damages materials, but it has changed dramatically in the past century, with a reduction in the concentration of corrosive primary pollutants in urban atmospheres. At the same time, architectural styles and types of materials have changed, as we have moved to more organically rich, photochemically active atmospheres. Contemporary pollutants have a greater potential to degrade organic coatings and polymers, which are of great importance to modern structures. Urban Pollution and Changes to Materials and Building Surfaces examines a range of materials, discussing the ways in which they are likely to be damaged by contemporary urban pollutants, with an emphasis on the effects of air pollution. A chapter on graffiti is also included. The wide scope covered means that this volume is suitable for readers from a broad background. It should be of interest to scientists and policymakers dealing with the effects of urban pollution, as well as undergraduate and graduate students working in this area. This book, with its wealth of information, is of exceedingly good value for readers who seek to understand more on the changes of materials and building surfaces by urban pollution. Contents:Past, Present and Future Damage to Materials and Building Surfaces in the Polluted Urban EnvironmentWeathering of Building MaterialsAir Pollution Damage to StoneComposition and Chemistry of Crusts on StoneSoiling and DiscolourationAir Pollution Damage to MetalsAir Pollution Damage to GlassAir Pollution and Changes to the Biology of Urban FabricThe Whole Building and Patterns of DegradationThe Historic and Archaeological Heritage: Pollution and Non-Urban SitesEvaluation of Cleaning Methods for Graffiti Removal Readership: Scientists and policymakers dealing with the effects of urban pollution, as well as undergraduate and graduate students working in this area. Key Features:There are very few books that treat the problem in general although there are some on materials such as stone, glass and metals, which have chapters on air pollutantsKeywords:Damage to Materials;Building Surfaces;Stone;Metal;Glass
Download or read book Forensic Examination of Glass and Paint written by Brian Caddy and published by CRC Press. This book was released on 2001-08-23 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume represents an approach to the analysis of glass and paint as they occur as trace evidence in forensic cases. Each chapter is written by an expert in their particular area. The book is divided into two sections: one referring to paint and one referring to glass. Each section covers an introduction to the composition of these materials an
Download or read book Handbook of Surface and Colloid Chemistry written by K. S. Birdi and published by CRC Press. This book was released on 2002-08-27 with total page 781 pages. Available in PDF, EPUB and Kindle. Book excerpt: The science of surface and colloid chemistry has been expanding at a rapid pace, resulting in new areas of development, additional applications, and more theoretical and experimental information on related systems. Completely revised and expanded to reflect the very active worldwide research on this subject, this is the definitive handbook for the
Download or read book Plant Sanitation and Industrial Wastes Disposal written by and published by . This book was released on 1986 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Basics of Paint Technology part I written by V. C. Malshe and published by Prakash C. Malshe. This book was released on 2010 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Outlines of Paint Technology written by W. M. Morgans and published by Wiley. This book was released on 1990-09-07 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents a general framework for the manufacture and use of paints and pigments in a convenient single-volume reference. Divided into two major sections--the materials used in paint manufacture and the technology of the finished products and their applications. This edition extensively revises the coverage to include an increased range of pigments and the latest developments and improvements in the field including: improved color measurements and solvent changes due to tightened health standards and the increase in cathodic deposition of paint.
