Download or read book Introduction to Instrumentation and Measurements written by Robert B. Northrop and published by CRC Press. This book was released on 2005-06-28 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: Knowledge of instrumentation is critical in light of the highly sensitive and precise requirements of modern processes and systems. Rapid development in instrumentation technology coupled with the adoption of new standards makes a firm, up-to-date foundation of knowledge more important than ever in most science and engineering fields. Understanding this, Robert B. Northrop produced the best-selling Introduction to Instrumentation and Measurements in 1997. The second edition continues to provide in-depth coverage of a wide array of modern instrumentation and measurement topics, updated to reflect advances in the field. See What's New in the Second Edition: Anderson Current Loop technology Design of optical polarimeters and their applications Photonic measurements with photomultipliers and channel-plate photon sensors Sensing of gas-phase analytes (electronic "noses") Using the Sagnac effect to measure vehicle angular velocity Micromachined, vibrating mass, and vibrating disk rate gyros Analysis of the Humphrey air jet gyro Micromachined IC accelerometers GPS and modifications made to improve accuracy Substance detection using photons Sections on dithering, delta-sigma ADCs, data acquisition cards, the USB, and virtual instruments and PXI systems Based on Northrop's 40 years of experience, Introduction to Instrumentation and Measurements, Second Edition is unequalled in its depth and breadth of coverage.
Download or read book Introduction to Instrumentation and Measurements written by Robert B. Northrop and published by CRC Press. This book was released on 2018-09-03 with total page 952 pages. Available in PDF, EPUB and Kindle. Book excerpt: Weighing in on the growth of innovative technologies, the adoption of new standards, and the lack of educational development as it relates to current and emerging applications, the third edition of Introduction to Instrumentation and Measurements uses the authors’ 40 years of teaching experience to expound on the theory, science, and art of modern instrumentation and measurements (I&M). What’s New in This Edition: This edition includes material on modern integrated circuit (IC) and photonic sensors, micro-electro-mechanical (MEM) and nano-electro-mechanical (NEM) sensors, chemical and radiation sensors, signal conditioning, noise, data interfaces, and basic digital signal processing (DSP), and upgrades every chapter with the latest advancements. It contains new material on the designs of micro-electro-mechanical (MEMS) sensors, adds two new chapters on wireless instrumentation and microsensors, and incorporates extensive biomedical examples and problems. Containing 13 chapters, this third edition: Describes sensor dynamics, signal conditioning, and data display and storage Focuses on means of conditioning the analog outputs of various sensors Considers noise and coherent interference in measurements in depth Covers the traditional topics of DC null methods of measurement and AC null measurements Examines Wheatstone and Kelvin bridges and potentiometers Explores the major AC bridges used to measure inductance, Q, capacitance, and D Presents a survey of sensor mechanisms Includes a description and analysis of sensors based on the giant magnetoresistive effect (GMR) and the anisotropic magnetoresistive (AMR) effect Provides a detailed analysis of mechanical gyroscopes, clinometers, and accelerometers Contains the classic means of measuring electrical quantities Examines digital interfaces in measurement systems Defines digital signal conditioning in instrumentation Addresses solid-state chemical microsensors and wireless instrumentation Introduces mechanical microsensors (MEMS and NEMS) Details examples of the design of measurement systems Introduction to Instrumentation and Measurements is written with practicing engineers and scientists in mind, and is intended to be used in a classroom course or as a reference. It is assumed that the reader has taken core EE curriculum courses or their equivalents.
Download or read book Real World Instrumentation with Python written by John M. Hughes and published by "O'Reilly Media, Inc.". This book was released on 2010-11-15 with total page 623 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn how to develop your own applications to monitor or control instrumentation hardware. Whether you need to acquire data from a device or automate its functions, this practical book shows you how to use Python's rapid development capabilities to build interfaces that include everything from software to wiring. You get step-by-step instructions, clear examples, and hands-on tips for interfacing a PC to a variety of devices. Use the book's hardware survey to identify the interface type for your particular device, and then follow detailed examples to develop an interface with Python and C. Organized by interface type, data processing activities, and user interface implementations, this book is for anyone who works with instrumentation, robotics, data acquisition, or process control. Understand how to define the scope of an application and determine the algorithms necessary, and why it's important Learn how to use industry-standard interfaces such as RS-232, RS-485, and GPIB Create low-level extension modules in C to interface Python with a variety of hardware and test instruments Explore the console, curses, TkInter, and wxPython for graphical and text-based user interfaces Use open source software tools and libraries to reduce costs and avoid implementing functionality from scratch
Download or read book Introduction to Instrumentation in Life Sciences written by Prakash Singh Bisen and published by CRC Press. This book was released on 2012-09-26 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: Instrumentation is central to the study of physiology and genetics in living organisms, especially at the molecular level. Numerous techniques have been developed to address this in various biological disciplines, creating a need to understand the physical principles involved in the operation of research instruments and the parameters required in using them. Introduction to Instrumentation in Life Sciences fills this need by addressing different aspects of tools that hold the keys to cutting-edge research and innovative applications, from basic techniques to advanced instrumentation. The text describes all topics so even beginners can easily understand the theoretical and practical aspects. Comprehensive chapters encompass well-defined methodology that describes the instruments and their corresponding applications in different scientific fields. The book covers optical and electron microscopy; micrometry, especially in microbial taxonomy; pH meters and oxygen electrodes; chromatography for separation and purification of products from complex mixtures; spectroscopic and spectrophotometric techniques to determine structure and function of biomolecules; preparative and analytical centrifugation; electrophoretic techniques; x-ray microanalysis including crystallography; applications of radioactivity, including autoradiography and radioimmunoassays; and fermentation technology and subsequent separation of products of interest. The book is designed to serve a wide range of students and researchers in diversified fields of life sciences: pharmacy, biotechnology, microbiology, biochemistry, and environmental sciences. It introduces different aspects of basic experimental methods and instrumentation. The book is unique in its broad subject coverage, incorporating fundamental techniques as well as applications of modern molecular and proteomic tools that are the basis for state-of-the-art research. The text emphasizes techniques encountered both in practical classes and in high-throughput environments used in modern industry. As a further aid to students, the authors provide well-illustrated diagrams to explain the principles and theories behind the instruments described.
Download or read book INTRODUCTION TO MEASUREMENTS AND INSTRUMENTATION written by ARUN K. GHOSH and published by PHI Learning Pvt. Ltd.. This book was released on 2012-10-16 with total page 937 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fourth edition of this highly readable and well-received book presents the subject of measurement and instrumentation systems as an integrated and coherent text suitable for a one-semester course for undergraduate students of Instrumentation Engineering, as well as for instrumentation course/paper for Electrical/Electronics disciplines. Modern scientific world requires an increasing number of complex measurements and instruments. The subject matter of this well-planned text is designed to ensure that the students gain a thorough understanding of the concepts and principles of measurement of physical quantities and the related transducers and instruments. This edition retains all the features of its previous editions viz. plenty of worked-out examples, review questions culled from examination papers of various universities for practice and the solutions to numerical problems and other additional information in appendices. NEW TO THIS EDITION Besides the inclusion of a new chapter on Hazardous Areas and Instrumentation(Chapter 15), various new sections have been added and existing sections modified in the following chapters: Chapter 3 Linearisation and Spline interpolation Chapter 5 Classifications of transducers, Hall effect, Piezoresistivity, Surface acoustic waves, Optical effects (This chapter has been thoroughly modified) Chapter 6 Proximitys sensors Chapter 8 Hall effect and Saw transducers Chapter 9 Proving ring, Prony brake, Industrial weighing systems, Tachometers Chapter 10 ITS-90, SAW thermometer Chapter 12 Glass gauge, Level switches, Zero suppression and Zero elevation, Level switches Chapter 13 The section on ISFET has been modified substantially
Download or read book Instrumentation and Control Systems written by William Bolton and published by Elsevier. This book was released on 2004-06-03 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: In a clear and readable style, Bill Bolton addresses the basic principles of modern instrumentation and control systems, including examples of the latest devices, techniques and applications. Unlike the majority of books in this field, only a minimal prior knowledge of mathematical methods is assumed. The book focuses on providing a comprehensive introduction to the subject, with Laplace presented in a simple and easily accessible form, complimented by an outline of the mathematics that would be required to progress to more advanced levels of study.Taking a highly practical approach, Bill Bolton combines underpinning theory with numerous case studies and applications throughout, to enable the reader to apply the content directly to real-world engineering contexts. Coverage includes smart instrumentation, DAQ, crucial health and safety considerations, and practical issues such as noise reduction, maintenance and testing. An introduction to PLCs and ladder programming is incorporated in the text, as well as new information introducing the various software programmes used for simulation.Problems with a full answer section are also included, to aid the reader's self-assessment and learning, and a companion website (for lecturers only) at http://textbooks.elsevier.com features an Instructor's Manual including multiple choice questions, further assignments with detailed solutions, as well as additional teaching resources.The overall approach of this book makes it an ideal text for all introductory level undergraduate courses in control engineering and instrumentation. It is fully in line with latest syllabus requirements, and also covers, in full, the requirements of the Instrumentation & Control Principles and Control Systems & Automation units of the new Higher National Engineering syllabus from Edexcel.* Assumes minimal prior mathematical knowledge, creating a highly accessible student-centred text* Problems, case studies and applications included throughout, with a full set of answers at the back of the book, to aid student learning, and place theory in real-world engineering contexts* Free online lecturer resources featuring supporting notes, multiple-choice tests, lecturer handouts and further assignments and solutions
Download or read book Introduction to Biomedical Instrumentation written by Barbara Christe and published by Cambridge University Press. This book was released on 2009-04-06 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is designed to introduce the reader to the fundamental information necessary for work in the clinical setting, supporting the technology used in patient care. Beginning biomedical equipment technologists can use this book to obtain a working vocabulary and elementary knowledge of the industry. Content is presented through the inclusion of a wide variety of medical instrumentation, with an emphasis on generic devices and classifications; individual manufacturers are explained only when the market is dominated by a particular unit. Designed for the reader with a fundamental understanding of anatomy, physiology, and medical terminology appropriate for their role in the health care field and assumes the reader's understanding of electronic concepts, including voltage, current, resistance, impedance, analog and digital signals, and sensors. The material covered will assist the reader in the development of his or her role as a knowledgeable and effective member of the patient care team.
Download or read book Basic Electrical and Instrumentation Engineering written by P. Sivaraman and published by John Wiley & Sons. This book was released on 2021-01-13 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrical and instrumentation engineering is changing rapidly, and it is important for the veteran engineer in the field not only to have a valuable and reliable reference work which he or she can consult for basic concepts, but also to be up to date on any changes to basic equipment or processes that might have occurred in the field. Covering all of the basic concepts, from three-phase power supply and its various types of connection and conversion, to power equation and discussions of the protection of power system, to transformers, voltage regulation, and many other concepts, this volume is the one-stop, "go to" for all of the engineer's questions on basic electrical and instrumentation engineering. There are chapters covering the construction and working principle of the DC machine, all varieties of motors, fundamental concepts and operating principles of measuring, and instrumentation, both from a "high end" point of view and the point of view of developing countries, emphasizing low-cost methods. A valuable reference for engineers, scientists, chemists, and students, this volume is applicable to many different fields, across many different industries, at all levels. It is a must-have for any library.
Download or read book Introduction to Electrophysiological Methods and Instrumentation written by Franklin Bretschneider and published by Academic Press. This book was released on 2018-11-13 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Electrophysiological Methods and Instrumentation, Second Edition covers all topics of interest to electrophysiologists, neuroscientists and neurophysiologists, from the reliable penetration of cells and the behavior and function of the equipment, to the mathematical tools available for analyzing data. It discusses the pros and cons of techniques and methods used in electrophysiology and how to avoid pitfalls. Although the basics of electrophysiological techniques remain the principal purpose of this second edition, it now integrates several current developments, including, amongst others, automated recording for high throughput screening and multimodal recordings to correlate electrical activity with other physiological parameters collected by optical means. This book provides the electrophysiologist with the tools needed to understand his or her equipment and how to acquire and analyze low-voltage biological signals. - Introduces possibilities and solutions, along with the problems, pitfalls, and artefacts of equipment and electrodes - Discusses the particulars of recording from brain tissue slices, oocytes and planar bilayers - Describes optical methods pertinent to electrophysiological practice - Presents the fundamentals of signal processing of analogue signals, spike trains and single channel recordings, along with procedures for signal recording and processing - Includes appendices on electrical safety and foundations of useful mathematical tools
Download or read book Fundamentals of Instrumentation and Measurement written by Dominique Placko and published by John Wiley & Sons. This book was released on 2013-03-01 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title presents the general principles of instrumentation processes. It explains the theoretical analysis of physical phenomena used by standard sensors and transducers to transform a physical value into an electrical signal. The pre-processing of these signals through electronic circuits – amplification, signal filtering and analog-to-digital conversion – is then detailed, in order to provide useful basic information. Attention is then given to general complex systems. Topics covered include instrumentation and measurement chains, sensor modeling, digital signal processing and diagnostic methods and the concept of smart sensors, as well as microsystem design and applications. Numerous industrial examples punctuate the discussion, setting the subjects covered in the book in their practical context.
Download or read book Modern Instrumentation written by G Silverman and published by CRC Press. This book was released on 1995-01-01 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern science and engineering relies heavily on understanding computer hardware and software in order to make effective use of these tools in the laboratory and industrial environments. The authors of Modern Instrumentation: A Computer Approach have succeeded in producing a highly readable source that will serve both newcomers to the field as well as experienced professionals. Including both fundamentals and applications, the book first describes the role of the computer in instrument systems and provides numerous practical examples. The second part of the book explores specific software packages and their capabilities for applications such as, instrument design and simulation, data acquisition, data processing, and the potential of artificial intelligence in instrument design. Because of the full integration of theory with practical applications of leading software packages, this book is an extremely useful reference for those who use computer-based instrument technology for data acquisition and who are involved with hardware or software development for laboratory and process control.
Download or read book Instrumentation and Control Systems written by William Bolton and published by Newnes. This book was released on 2015-08-06 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Instrumentation and Control Systems addresses the basic principles of modern instrumentation and control systems, including examples of the latest devices, techniques and applications in a clear and readable style. Unlike the majority of books in this field, only a minimal prior knowledge of mathematical methods is assumed. The book focuses on providing a comprehensive introduction to the subject, with Laplace presented in a simple and easily accessible form, complimented by an outline of the mathematics that would be required to progress to more advanced levels of study. Taking a highly practical approach, the author combines underpinning theory with numerous case studies and applications throughout, to enable the reader to apply the content directly to real-world engineering contexts. Coverage includes smart instrumentation, DAQ, crucial health and safety considerations, and practical issues such as noise reduction, maintenance and testing. PLCs and ladder programming is incorporated in the text, as well as new information introducing the various software programs used for simulation. The overall approach of this book makes it an ideal text for all introductory level undergraduate courses in control engineering and instrumentation. It is fully in line with latest syllabus requirements, and also covers, in full, the requirements of the Instrumentation & Control Principles and Control Systems & Automation units of the new Higher National Engineering syllabus from Edexcel. - Completely updated - Assumes minimal prior mathematical knowledge - Highly accessible student-centred text - Includes an extensive collection of problems, case studies and applications, with a full set of answers at the back of the book - Helps placing theory in real-world engineering contexts
Download or read book Process Plant Instrumentation written by Miguel J. Bagajewicz and published by CRC Press. This book was released on 2000-11-27 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first in-depth presentation in book form of current analytical methods for optimal design, selection and evaluation of instrumentation for process plants. The presentation is clear, concise and systematic-providing process engineers with a valuable tool for improving quality, costs, safety, loss prevention, and production accounting.
Download or read book Experimental Methods and Instrumentation for Chemical Engineers written by Gregory S. Patience and published by Elsevier. This book was released on 2017-09-08 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experimental Methods and Instrumentation for Chemical Engineers, Second Edition, touches many aspects of engineering practice, research, and statistics. The principles of unit operations, transport phenomena, and plant design constitute the focus of chemical engineering in the latter years of the curricula. Experimental methods and instrumentation is the precursor to these subjects. This resource integrates these concepts with statistics and uncertainty analysis to define what is necessary to measure and to control, how precisely and how often.The completely updated second edition is divided into several themes related to data: metrology, notions of statistics, and design of experiments. The book then covers basic principles of sensing devices, with a brand new chapter covering force and mass, followed by pressure, temperature, flow rate, and physico-chemical properties. It continues with chapters that describe how to measure gas and liquid concentrations, how to characterize solids, and finally a new chapter on spectroscopic techniques such as UV/Vis, IR, XRD, XPS, NMR, and XAS. Throughout the book, the author integrates the concepts of uncertainty, along with a historical context and practical examples.A problem solutions manual is available from the author upon request. - Includes the basics for 1st and 2nd year chemical engineers, providing a foundation for unit operations and transport phenomena - Features many practical examples - Offers exercises for students at the end of each chapter - Includes up-to-date detailed drawings and photos of equipment
Download or read book Basic Electronic Instrument Handbook written by Clyde F. Coombs and published by McGraw-Hill Companies. This book was released on 1972 with total page 874 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to instrumentation. Fundamentals of electronic-measurement instruments. Fundamentals of signal-generation instruments. Using electronic instruments. Instrumentation systems. Current- and voltage-measurement devices. Circuit-element measuring instruments. Signal-generation instruments. Frequency- and time-measurement instruments. Recording instruments. Special-function instruments. Microwave passive devices.
Download or read book Instrumentation and Measurement in Electrical Engineering written by Roman Malaric and published by Universal-Publishers. This book was released on 2011 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: The inclusion of an electrical measurement course in the undergraduate curriculum of electrical engineering is important in forming the technical and scientific knowledge of future electrical engineers. This book explains the basic measurement techniques, instruments, and methods used in everyday practice. It covers in detail both analogue and digital instruments, measurements errors and uncertainty, instrument transformers, bridges, amplifiers, oscilloscopes, data acquisition, sensors, instrument controls and measurement systems. The reader will learn how to apply the most appropriate measurement method and instrument for a particular application, and how to assemble the measurement system from physical quantity to the digital data in a computer. The book is primarily intended to cover all necessary topics of instrumentation and measurement for students of electrical engineering, but can also serve as a reference for engineers and practitioners to expand or refresh their knowledge in this field.
Download or read book An Introduction to Electrical Instrumentation A Guide to the Use Selection and Limitations of Electrical Instruments and Measuring Systems written by B. a. Gregory and published by Palgrave. This book was released on 2013-12-31 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt:
