Download or read book Introduction to Health and Safety at Work Revision Cards written by Ed Ferrett and published by Routledge. This book was released on 2012-06-14 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: When used alongside Introduction to Health and Safety at Work (ISBN 978-1-85617-668-2), these revision cards will prepare you for the two written assessments of the NEBOSH National General Certificate in Occupational Safety and Health.
Download or read book Introduction to Health and Safety at Work written by Phil Hughes MBE and published by Routledge. This book was released on 2020-12-21 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Health and Safety at Work covers the fundamentals of occupational safety and closely follows the NEBOSH National General Certificate syllabus which was updated in 2019 and came into use in 2020. Highly illustrated and over 600 pages in length, it covers all of the essential elements of health and safety management, the legal framework, risk assessment and control standards and also includes checklists, report forms and record sheets to supplement learning. It also has an extensive summary of current health and safety legislation. Aligned to the NEBOSH National General Certificate in Occupational Health and Safety Practice questions and answers to test knowledge and increase understanding In addition to helping students study for the NGC, it is used for reference and revision on other Health and Safety qualifications at level 3 and above, including the Nebosh Diploma. It is also a source of reference and guidance for health and safety practitioners in the workplace.
Download or read book Introduction to Health and Safety in Construction Revision Cards written by Ed Ferrett and published by Elsevier. This book was released on 2010-06-07 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Together with the textbook Introduction to Health and Safety in Construction, these revision cards will prepare you for the two written assessments of the NEBOSH National General Certificate in Occupational Safety and Health. The key knowledge of units NGC 1 and NCC 1 is presented in bullet point and table format to make revision easy. The small size and spiral binding means you can study anywhere at any time and know where you left off. * Succinct summary of the key points of the two taught units * Compact format to carry around with you * Written by the Vice Chairman of NEBOSH and a lecturer on NEBOSH courses
Download or read book Principles of Health and Safety at Work written by Allan St John Holt and published by Routledge. This book was released on 2015-06-22 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a reprint of ISBN 978-0-901-35743-4 Widely acknowledged as the one stop summary of health and safety fundamentals, Principles covers law, safety technology, occupational health and hygiene and safety management techniques. Originally written by the late international health and safety expert Allan St John Holt, this new edition has been comprehensively updated by Allan's colleague Jim Allen. The book is designed as a concise, accessible introduction to health and safety basics and includes revision notes and a wide range of references. It is a first class resource for NEBOSH Certificate students.
Download or read book Introduction to Health and Safety at Work written by Phil Hughes and published by Routledge. This book was released on 2015-08-27 with total page 1388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Health and Safety at Work covers the fundamentals of occupational safety and health for the thousands of students who complete the NEBOSH National General Certificate in Occupational Health and Safety each year. Fully revised in alignment with the April 2015 syllabus, this sixth edition provides students with all they need to tackle the course with confidence. The highly illustrated content covers all of the essential elements of health and safety management, the legal framework, risk assessment and control standards and also includes checklists, report forms and record sheets to supplement learning. Aligned to the NEBOSH National General Certificate in Occupational Health and Safety Practice questions and answers to test knowledge and increase understanding Complete with a companion website containing extra resources for tutors and students at www.routledge.com/cw/hughes Written by renowned authors, the Introduction to Health and Safety at Work is also a handy reference for managers and directors dealing with the day-to-day issues of health and safety and is of great value to those studying for level 3 N/SVQ and the NEBOSH National Diploma.
Download or read book Introduction to Health and Safety at Work written by and published by Routledge. This book was released on with total page 619 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book International Health and Safety at Work Revision Guide written by Ed Ferrett and published by Routledge. This book was released on 2012 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This Guide has been designed to be used together with the NEBOSH International General Certificate syllabus and the textbook. Introduction to International Health and Safety at Work by Hughes and Ferrett. The guide gives only a basic summary of the NEBOSH International General Certificate course and a full explanation of all the topics is given in the text book.The Revision Guide has the following features; It follows the latest NEBOSH International General Certificate syllabus; Revision notes for each of the elements of the two units IGC1 Management of international health and safety and IGC2 Controlling international workplace risks; A summary of the learning outcomes and key points is given for each element; Important diagrams are included to help revision; There is a final section to advise on preparation for the examination and some specimen answers to both long and short answer question taken from recent NEBOSH examination papers. The Revision Guide will also be useful to those who work outside the UK and have specific health and safety responsibilities in their jobs and those who are studying on other courses that include important health and safety elements, for example courses in Engineering, Business Studies, the Health Services and Retail and Hotel Management. The compact size of the Revision Guide ensures that they can be easily carried and used for revision at any time or place. They should be used throughout the course alongside the textbook and course hand-outs"--
Download or read book Introduction to Health and Safety at Work written by Phil Hughes MBE and published by Routledge. This book was released on 2020-12-22 with total page 1214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Health and Safety at Work covers the fundamentals of occupational safety and health for the thousands of students who complete the NEBOSH National General Certificate in Occupational Health and Safety each year. This seventh edition closely follows the NEBOSH National General Certificate syllabus which was updated in 2019 and comes into use in 2020. The highly illustrated content covers all of the essential elements of health and safety management, the legal framework, risk assessment and control standards and also includes checklists, report forms and record sheets to supplement learning. It also has an extensive summary of current health and safety legislation. • Aligned to the NEBOSH National General Certificate in Occupational Health and Safety • Practice questions and answers to test knowledge and increase understanding • Complete with a companion website containing extra resources for tutors and students The book is suitable for all students following a level 3 Health and Safety course and a source of reference and guidance for managers at work in the UK. Written by renowned authors, this book is often provided as part of the Certificate course and is essential reading for a student.
Download or read book Health and Safety Pocket Book written by Garry Hunt and published by Routledge. This book was released on 2018-03-09 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of the Health and Safety Pocket Book has been fully revised and updated to include all the relevant legal, HSE ACoP/Guidance and practice references. It remains a handy reference tool for practising health and safety professionals, auditors, managers, HR personnel, employee representatives and anyone with health and safety responsibilities. The book is an essential compilation of guidance, data and checklists covering a wide range of health and safety topics, supported by extensive key glossary terms. The A–Z arrangement within the chapters and extensive cross-referencing make it easy to navigate, while its size and scope make it the ideal volume for ready reference and site visits. The book will also be useful for health and safety courses at all levels. Key features include: The principal health and safety legal requirements for every industry Safety management elements and systems Checklists for major hazards affecting all industries A wealth of charts, hard-to-remember details and data A glossary of the main concepts of health and safety A list of important health and safety courses, publications and organisations Revision tips for key examination themes.
Download or read book Patho Phlash written by Valerie I. Leek and published by F.A. Davis. This book was released on 2011-10-19 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: Perfect for… Understanding diseases and disorders Increasing test scores in class Improving scores on the NCLEX® examination ? Rely on over 200 full-color flash cards for the most critical clinical information about common diseases and disorders. Color-coded by body system, these handy cards familiarize students with the great deal of pathophysiologic information they must master. Color-coded, body-system organization. Supplemental categories on dermatologic conditions, mental health, and women’s health. Card front—the name of the condition • pronunciation • a clue to its meaning or significance • and the icon representing the associated body system. Card back—description of the pathophysiology • assessment and diagnostic findings • complications • and the medical and surgical treatments. Memory aids on every card, including “Keep in Mind, “Make the Connection,” and “Remember.” Charts, tables, and photographs throughout. Comprehensive, alphabetical index.
Download or read book Health and Safety in Construction Revision Guide written by Ed Ferrett and published by Routledge. This book was released on 2015-09-16 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: This companion to the bestselling Introduction to Health and Safety in Construction is an essential revision aid for students preparing for their written assessments on the NEBOSH National Certificate in Construction Health and Safety. Fully updated to the April 2015 specification, the revision guide provides complete coverage of the syllabus in bite-sized chunks, helping readers to learn and memorise the most important topics. Throughout the book, the guide links back to the Introduction to Health and Safety in Construction textbook, helping students to consolidate their learning. · Small and portable making it ideal for use anywhere: at home, in the classroom or on the move · Suggests useful tips on study and examination technique · Includes practice questions and answers based on NEBOSH exam questions · Everything you need for productive revision in one handy reference The Health and Safety in Construction Revision Guide, written by the renowned health and safety author and former NEBOSH Vice Chairman Ed Ferrett, will be an invaluable tool for students as they prepare for their NEBOSH exam and for their subsequent health and safety work.
Download or read book Health and Safety in Construction Revision Guide written by Ed Ferrett and published by Routledge. This book was released on 2015-09-16 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: This companion to the bestselling Introduction to Health and Safety in Construction is an essential revision aid for students preparing for their written assessments on the NEBOSH National Certificate in Construction Health and Safety. Fully updated to the April 2015 specification, the revision guide provides complete coverage of the syllabus in bite-sized chunks, helping readers to learn and memorise the most important topics. Throughout the book, the guide links back to the Introduction to Health and Safety in Construction textbook, helping students to consolidate their learning. · Small and portable making it ideal for use anywhere: at home, in the classroom or on the move · Suggests useful tips on study and examination technique · Includes practice questions and answers based on NEBOSH exam questions · Everything you need for productive revision in one handy reference The Health and Safety in Construction Revision Guide, written by the renowned health and safety author and former NEBOSH Vice Chairman Ed Ferrett, will be an invaluable tool for students as they prepare for their NEBOSH exam and for their subsequent health and safety work.
Download or read book Introduction to Health and Safety in Construction written by Phil Hughes and published by Routledge. This book was released on 2015-09-16 with total page 1563 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Health and Safety in Construction has been specially written for the thousands of students who complete the NEBOSH National Certificate in Construction Health and Safety each year. Fully revised in alignment with the April 2015 syllabus, the fifth edition provides students with all they need to tackle the course with confidence. The book covers all the essential elements of health and safety management in construction including the legal framework, risk assessment and control standards. Highly illustrated, with information provided in a clear, easily accessible format, it also provides checklists and record sheets to supplement learning. Aligned to the NEBOSH National Certificate in Construction Health and Safety Practice questions and answers to test knowledge and increase understanding Complete with a companion website containing extra resources for tutors and students at www.routledge.com/cw/hughes The only textbook endorsed for the NEBOSH National Certificate in Construction Health and Safety, the Introduction to Health and Safety in Construction is also suitable for construction courses in the UK and overseas and serves as a comprehensive reference for managers and professionals within the construction industry.
Download or read book Introduction to Health and Safety in Construction written by Phil Hughes and published by Routledge. This book was released on 2008-06-12 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: Highly illustrated and easy to read, this text covers the specific challenges faced by the construction industry as well as the basics of occupational safety and health in general. It includes checklists, report forms, and record sheets.
Download or read book Introduction to Health and Safety at Work written by Phil Hughes MBE and published by Routledge. This book was released on 2015-08-27 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Health and Safety at Work covers the fundamentals of occupational safety and health for the thousands of students who complete the NEBOSH National General Certificate in Occupational Health and Safety each year. Fully revised in alignment with the April 2015 syllabus, this sixth edition provides students with all they need to tackle the course with confidence. The highly illustrated content covers all of the essential elements of health and safety management, the legal framework, risk assessment and control standards and also includes checklists, report forms and record sheets to supplement learning. Aligned to the NEBOSH National General Certificate in Occupational Health and Safety Practice questions and answers to test knowledge and increase understanding Complete with a companion website containing extra resources for tutors and students at www.routledge.com/cw/hughes Written by renowned authors, the Introduction to Health and Safety at Work is also a handy reference for managers and directors dealing with the day-to-day issues of health and safety and is of great value to those studying for level 3 N/SVQ and the NEBOSH National Diploma.
Download or read book Introduction to International Health and Safety at Work written by Phil Hughes and published by Routledge. This book was released on 2010-08-24 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text has been written for the fast growing NEBOSH international certificate in health and safety taken by around 6,000 students worldwide. Matched to the new 2011 syllabus and written in simple English, the coursebook provide students with all they need to tackle the course with confidence.
Download or read book Occupational Safety and Health for Technologists Engineers and Managers written by David L. Goetsch and published by . This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Known for its comprehensive coverage, this text covers all aspects of occupational safety and health in today s global workplace. Appropriate for safety management, engineering and technology programs, the book follows a logical sequence that provides a historical perspective and overview, covers the laws and regulations, discusses the human element, examines hazard assessment, prevention, and control, and covers management of safety and health. This edition features updated OSHA standards and contemporary topics such as safety culture, safety s role in global competitiveness, workplace violence, natural disasters and terrorism. Some new features include: All OSHA standards, as well as those of other regulatory agencies, were updated Chapter 4: Added a new section on the Emerging Role of Safety Professionals Chapter 9: Added a new section on the safety professional s role in product recalls Chapter 15: Added a new section on practical prevention measures for reducing slip and fall hazards and a new checklist for enhancing vision protection "
