Download or read book Introduction to Digital Signal Processing Using MATLAB with Application to Digital Communications written by K.S. Thyagarajan and published by Springer. This book was released on 2018-05-28 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook provides engineering students with instruction on processing signals encountered in speech, music, and wireless communications using software or hardware by employing basic mathematical methods. The book starts with an overview of signal processing, introducing readers to the field. It goes on to give instruction in converting continuous time signals into digital signals and discusses various methods to process the digital signals, such as filtering. The author uses MATLAB throughout as a user-friendly software tool to perform various digital signal processing algorithms and to simulate real-time systems. Readers learn how to convert analog signals into digital signals; how to process these signals using software or hardware; and how to write algorithms to perform useful operations on the acquired signals such as filtering, detecting digitally modulated signals, correcting channel distortions, etc. Students are also shown how to convert MATLAB codes into firmware codes. Further, students will be able to apply the basic digital signal processing techniques in their workplace. The book is based on the author's popular online course at University of California, San Diego.
Download or read book Digital Signal Processing Using MATLAB written by Vinay K. Ingle and published by . This book was released on 2012 with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Digital Signal Processing Using MATLAB written by Vinay K. Ingle and published by Nelson Books. This book was released on 2007 with total page 605 pages. Available in PDF, EPUB and Kindle. Book excerpt: This supplement to any standard DSP text is one of the first books to successfully integrate the use of MATLAB® in the study of DSP concepts. In this book, MATLAB® is used as a computing tool to explore traditional DSP topics, and solve problems to gain insight. This greatly expands the range and complexity of problems that students can effectively study in the course. Since DSP applications are primarily algorithms implemented on a DSP processor or software, a fair amount of programming is required. Using interactive software such as MATLAB® makes it possible to place more emphasis on learning new and difficult concepts than on programming algorithms. Interesting practical examples are discussed and useful problems are explored. This updated second edition includes new homework problems and revises the scripts in the book, available functions, and m-files to MATLAB® V7.
Download or read book Digital Signal Processing Using MATLAB for Students and Researchers written by John W. Leis and published by John Wiley & Sons. This book was released on 2011-10-14 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quickly Engages in Applying Algorithmic Techniques to Solve Practical Signal Processing Problems With its active, hands-on learning approach, this text enables readers to master the underlying principles of digital signal processing and its many applications in industries such as digital television, mobile and broadband communications, and medical/scientific devices. Carefully developed MATLAB® examples throughout the text illustrate the mathematical concepts and use of digital signal processing algorithms. Readers will develop a deeper understanding of how to apply the algorithms by manipulating the codes in the examples to see their effect. Moreover, plenty of exercises help to put knowledge into practice solving real-world signal processing challenges. Following an introductory chapter, the text explores: Sampled signals and digital processing Random signals Representing signals and systems Temporal and spatial signal processing Frequency analysis of signals Discrete-time filters and recursive filters Each chapter begins with chapter objectives and an introduction. A summary at the end of each chapter ensures that one has mastered all the key concepts and techniques before progressing in the text. Lastly, appendices listing selected web resources, research papers, and related textbooks enable the investigation of individual topics in greater depth. Upon completion of this text, readers will understand how to apply key algorithmic techniques to address practical signal processing problems as well as develop their own signal processing algorithms. Moreover, the text provides a solid foundation for evaluating and applying new digital processing signal techniques as they are developed.
Download or read book Essentials of Digital Signal Processing Using MATLAB written by Vinay K. Ingle and published by . This book was released on 2011-03 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this supplementary text, MATLAB® is used as a computing tool to explore traditional DSP topics and solve problems to gain insight. This greatly expands the range and complexity of problems that students can effectively study in the course. Since DSP applications are primarily algorithms implemented on a DSP processor or software, a fair amount of programming is required. Using interactive software such as MATLAB® makes it possible to place more emphasis on learning new and difficult concepts than on programming algorithms. Interesting practical examples are discussed and useful problems are explored.
Download or read book Conceptual Digital Signal Processing with MATLAB written by Keonwook Kim and published by Springer Nature. This book was released on 2021 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook provides an introduction to the study of digital signal processing, employing a top-to-bottom structure to motivate the reader, a graphical approach to the solution of the signal processing mathematics, and extensive use of MATLAB. In contrast to the conventional teaching approach, the book offers a top-down approach which first introduces students to digital filter design, provoking questions about the mathematical tools required. The following chapters provide answers to these questions, introducing signals in the discrete domain, Fourier analysis, filters in the time domain and the Z-transform. The author introduces the mathematics in a conceptual manner with figures to illustrate the physical meaning of the equations involved. Chapter six builds on these concepts and discusses advanced filter design, and chapter seven discusses matters of practical implementation. This book introduces the corresponding MATLAB functions and programs in every chapter with examples, and the final chapter introduces the actual real-time filter from MATLAB. Aimed primarily at undergraduate students in electrical and electronic engineering, this book enables the reader to implement a digital filter using MATLAB.
Download or read book Digital Signal Processing with Examples in MATLAB written by Samuel D. Stearns and published by CRC Press. This book was released on 2016-04-19 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on fundamental principles from mathematics, linear systems, and signal analysis, digital signal processing (DSP) algorithms are useful for extracting information from signals collected all around us. Combined with today's powerful computing capabilities, they can be used in a wide range of application areas, including engineering, communicati
Download or read book Signals and Systems Using MATLAB written by Luis F. Chaparro and published by Academic Press. This book was released on 2018-10-29 with total page 838 pages. Available in PDF, EPUB and Kindle. Book excerpt: Signals and Systems Using MATLAB, Third Edition, features a pedagogically rich and accessible approach to what can commonly be a mathematically dry subject. Historical notes and common mistakes combined with applications in controls, communications and signal processing help students understand and appreciate the usefulness of the techniques described in the text. This new edition features more end-of-chapter problems, new content on two-dimensional signal processing, and discussions on the state-of-the-art in signal processing. Introduces both continuous and discrete systems early, then studies each (separately) in-depth Contains an extensive set of worked examples and homework assignments, with applications for controls, communications, and signal processing Begins with a review on all the background math necessary to study the subject Includes MATLAB® applications in every chapter
Download or read book Digital Signal Processing written by Samir I. Abood and published by CRC Press. This book was released on 2020-01-20 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital Signal Processing:A Primer with MATLAB® provides excellent coverage of discrete-time signals and systems. At the beginning of each chapter, an abstract states the chapter objectives. All principles are also presented in a lucid, logical, step-by-step approach. As much as possible, the authors avoid wordiness and detail overload that could hide concepts and impede understanding. In recognition of requirements by the Accreditation Board for Engineering and Technology (ABET) on integrating computer tools, the use of MATLAB® is encouraged in a student-friendly manner. MATLAB is introduced in Appendix C and applied gradually throughout the book. Each illustrative example is immediately followed by practice problems along with its answer. Students can follow the example step-by-step to solve the practice problems without flipping pages or looking at the end of the book for answers. These practice problems test students' comprehension and reinforce key concepts before moving onto the next section. Toward the end of each chapter, the authors discuss some application aspects of the concepts covered in the chapter. The material covered in the chapter is applied to at least one or two practical problems. It helps students see how the concepts are used in real-life situations. Also, thoroughly worked examples are given liberally at the end of every section. These examples give students a solid grasp of the solutions as well as the confidence to solve similar problems themselves. Some of hte problems are solved in two or three ways to facilitate a deeper understanding and comparison of different approaches. Designed for a three-hour semester course, Digital Signal Processing:A Primer with MATLAB® is intended as a textbook for a senior-level undergraduate student in electrical and computer engineering. The prerequisites for a course based on this book are knowledge of standard mathematics, including calculus and complex numbers.
Download or read book Digital Signal Processing written by Winser Alexander and published by Academic Press. This book was released on 2016-11-14 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital signal processing (DSP) has been applied to a very wide range of applications. This includes voice processing, image processing, digital communications, the transfer of data over the internet, image and data compression, etc. Engineers who develop DSP applications today, and in the future, will need to address many implementation issues including mapping algorithms to computational structures, computational efficiency, power dissipation, the effects of finite precision arithmetic, throughput and hardware implementation. It is not practical to cover all of these in a single text. However, this text emphasizes the practical implementation of DSP algorithms as well as the fundamental theories and analytical procedures that form the basis for modern DSP applications. Digital Signal Processing: Principles, Algorithms and System Design provides an introduction to the principals of digital signal processing along with a balanced analytical and practical treatment of algorithms and applications for digital signal processing. It is intended to serve as a suitable text for a one semester junior or senior level undergraduate course. It is also intended for use in a following one semester first-year graduate level course in digital signal processing. It may also be used as a reference by professionals involved in the design of embedded computer systems, application specific integrated circuits or special purpose computer systems for digital signal processing, multimedia, communications, or image processing. Covers fundamental theories and analytical procedures that form the basis of modern DSP Shows practical implementation of DSP in software and hardware Includes Matlab for design and implementation of signal processing algorithms and related discrete time systems Bridges the gap between reference texts and the knowledge needed to implement DSP applications in software or hardware
Download or read book Multirate Filtering for Digital Signal Processing MATLAB Applications written by Milic, Ljiljana and published by IGI Global. This book was released on 2009-01-31 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book covers basic and the advanced approaches in the design and implementation of multirate filtering"--Provided by publisher.
Download or read book Applied Digital Signal Processing written by Dimitris G. Manolakis and published by Cambridge University Press. This book was released on 2011-11-21 with total page 1009 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master the basic concepts and methodologies of digital signal processing with this systematic introduction, without the need for an extensive mathematical background. The authors lead the reader through the fundamental mathematical principles underlying the operation of key signal processing techniques, providing simple arguments and cases rather than detailed general proofs. Coverage of practical implementation, discussion of the limitations of particular methods and plentiful MATLAB illustrations allow readers to better connect theory and practice. A focus on algorithms that are of theoretical importance or useful in real-world applications ensures that students cover material relevant to engineering practice, and equips students and practitioners alike with the basic principles necessary to apply DSP techniques to a variety of applications. Chapters include worked examples, problems and computer experiments, helping students to absorb the material they have just read. Lecture slides for all figures and solutions to the numerous problems are available to instructors.
Download or read book Digital Signal Processing written by John Leis and published by Research Studies Press Limited. This book was released on 2002 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text covers signal processing from an applications perspective. The theory is presented with examples from image and audio signal processing. The algorithms developed are presented using MATLAB in order to allow the reader to experiment with what-if? scenarios. The book also provides a gateway to the numerous signal processing resources on the World Wide Web, and provides pointers on where to begin using real-world signals to experiment with.
Download or read book Digital Signal Processing Using MATLAB written by Vinay K. Ingle and published by Cengage Learning. This book was released on 2011-01-01 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this supplementary text, MATLAB is used as a computing tool to explore traditional DSP topics and solve problems to gain insight. This greatly expands the range and complexity of problems that students can effectively study in the course. Since DSP applications are primarily algorithms implemented on a DSP processor or software, a fair amount of programming is required. Using interactive software such as MATLAB makes it possible to place more emphasis on learning new and difficult concepts than on programming algorithms. Interesting practical examples are discussed and useful problems are explored. Important Notice: Media content referenced within the product description or the product text may not be available in the ebook version.
Download or read book Digital Signal Processing written by Zahir M. Hussain and published by Springer Science & Business Media. This book was released on 2011-02-17 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: In three parts, this book contributes to the advancement of engineering education and that serves as a general reference on digital signal processing. Part I presents the basics of analog and digital signals and systems in the time and frequency domain. It covers the core topics: convolution, transforms, filters, and random signal analysis. It also treats important applications including signal detection in noise, radar range estimation for airborne targets, binary communication systems, channel estimation, banking and financial applications, and audio effects production. Part II considers selected signal processing systems and techniques. Core topics covered are the Hilbert transformer, binary signal transmission, phase-locked loops, sigma-delta modulation, noise shaping, quantization, adaptive filters, and non-stationary signal analysis. Part III presents some selected advanced DSP topics.
Download or read book Algorithm Collections for Digital Signal Processing Applications Using Matlab written by E.S. Gopi and published by Springer Science & Business Media. This book was released on 2007-09-20 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Algorithms such as SVD, Eigen decomposition, Gaussian Mixture Model, HMM etc. are presently scattered in different fields. There remains a need to collect all such algorithms for quick reference. Also there is the need to view such algorithms in application point of view. This book attempts to satisfy the above requirement. The algorithms are made clear using MATLAB programs.
Download or read book Digital Signal Processing for Medical Imaging Using Matlab written by E.S. Gopi and published by Springer Science & Business Media. This book was released on 2012-09-14 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes medical imaging systems, such as X-ray, Computed tomography, MRI, etc. from the point of view of digital signal processing. Readers will see techniques applied to medical imaging such as Radon transformation, image reconstruction, image rendering, image enhancement and restoration, and more. This book also outlines the physics behind medical imaging required to understand the techniques being described. The presentation is designed to be accessible to beginners who are doing research in DSP for medical imaging. Matlab programs and illustrations are used wherever possible to reinforce the concepts being discussed.
