Download or read book Mathematics and Physics of Emerging Biomedical Imaging written by Committee on the Mathematics and Physics of Emerging Dynamic Biomedical Imaging and published by National Academies Press. This book was released on 1996-03-13 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: This cross-disciplinary book documents the key research challenges in the mathematical sciences and physics that could enable the economical development of novel biomedical imaging devices. It is hoped that the infusion of new insights from mathematical scientists and physicists will accelerate progress in imaging. Incorporating input from dozens of biomedical researchers who described what they perceived as key open problems of imaging that are amenable to attack by mathematical scientists and physicists, this book introduces the frontiers of biomedical imaging, especially the imaging of dynamic physiological functions, to the educated nonspecialist. Ten imaging modalities are covered, from the well-established (e.g., CAT scanning, MRI) to the more speculative (e.g., electrical and magnetic source imaging). For each modality, mathematics and physics research challenges are identified and a short list of suggested reading offered. Two additional chapters offer visions of the next generation of surgical and interventional techniques and of image processing. A final chapter provides an overview of mathematical issues that cut across the various modalities.
Download or read book Medical Imaging Systems written by Andreas Maier and published by Springer. This book was released on 2018-08-02 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book gives a complete and comprehensive introduction to the fields of medical imaging systems, as designed for a broad range of applications. The authors of the book first explain the foundations of system theory and image processing, before highlighting several modalities in a dedicated chapter. The initial focus is on modalities that are closely related to traditional camera systems such as endoscopy and microscopy. This is followed by more complex image formation processes: magnetic resonance imaging, X-ray projection imaging, computed tomography, X-ray phase-contrast imaging, nuclear imaging, ultrasound, and optical coherence tomography.
Download or read book Industrial X Ray Computed Tomography written by Simone Carmignato and published by Springer. This book was released on 2017-10-18 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: X-ray computed tomography has been used for several decades as a tool for measuring the three-dimensional geometry of the internal organs in medicine. However, in recent years, we have seen a move in manufacturing industries for the use of X-ray computed tomography; first to give qualitative information about the internal geometry and defects in a component, and more recently, as a fully-quantitative technique for dimensional and materials analysis. This trend is primarily due to the ability of X-ray computed tomography to give a high-density and multi-scale representation of both the external and internal geometry of a component, in a non-destructive, non-contact and relatively fast way. But, due to the complexity of X-ray computed tomography, there are remaining metrological issues to solve and the specification standards are still under development. This book will act as a one-stop-shop resource for students and users of X-ray computed tomography in both academia and industry. It presents the fundamental principles of the technique, detailed descriptions of the various components (hardware and software), current developments in calibration and performance verification and a wealth of example applications. The book will also highlight where there is still work to do, in the perspective that X-ray computed tomography will be an essential part of Industry 4.0.
Download or read book Imaging of Head and Neck Cancer written by A. T. Ahuja and published by Cambridge University Press. This book was released on 2003-01-06 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: This concise integrated handbook looks at all available imaging methods for head and neck cancer, highlighting the strengths and weaknesses of each method. The information is provided in a clinical context and will guide radiologists as to the information the clinician actually needs when managing a patient with head and neck cancer. It will also provide the clinician with the advantages and limitations of imaging. The text therefore deals with Ultrasound, CT and MRI. The initial chapters aim to give the reader a core knowledge, which can be used in imaging by the various methods described. The subsequent chapters are directed towards clinical problems and deal with the common cancers in a logical order.
Download or read book Cardiac CT Made Easy written by Paul Schoenhagen MD FAHA and published by CRC Press. This book was released on 2014-05-19 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: Obtaining and interpreting images of the heart is critical to the successful management of any cardiac disorders. Several imaging modalities are used to help cardiologists correctly diagnose these disorders and initiate the most appropriate form of treatment.Since the first publication of this book, the use of cardiovascular CT imaging has increase
Download or read book Computed Tomography written by Jiang Hsieh and published by Society of Photo Optical. This book was released on 2009-01-01 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: X-ray computed tomography (CT) continues to experience rapid growth, both in basic technology and new clinical applications. Seven years after its first edition, Computed Tomography: Principles, Design, Artifacts, and Recent Advancements, Second Edition, provides an overview of the evolution of CT, the mathematical and physical aspects of the technology, and the fundamentals of image reconstruction algorithms. Image display is examined from traditional methods used through the most recent advancements. Key performance indices, theories behind the measurement methodologies, and different measurement phantoms in image quality are discussed. The CT scanner is broken down into components to provide the reader with an understanding of their function, their latest advances, and their impact on the CT system. General descriptions and different categories of artifacts, their causes, and their corrections are considered at length. Given the high visibility and public awareness of the impact of x-ray radiation, the second edition features a new chapter on x-ray dose and presents different dose reduction techniques ranging from patient handling, optimal data acquisition, image reconstruction, and post-process. Based on the advancements over the past five years, the second edition added new sections on cone beam reconstruction algorithms, nonconventional helical acquisition and reconstruction, new reconstruction approaches, and dual-energy CT. Finally, new to this edition is a set of problems for each chapter, providing opportunities to enhance reader comprehension and practice the application of covered material.
Download or read book Springer Handbook of Medical Technology written by Rüdiger Kramme and published by Springer Science & Business Media. This book was released on 2011-10-02 with total page 1497 pages. Available in PDF, EPUB and Kindle. Book excerpt: This concise, user-oriented and up-to-date desk reference offers a broad introduction to the fascinating world of medical technology, fully considering today’s progress and further development in all relevant fields. The Springer Handbook of Medical Technology is a systemized and well-structured guideline which distinguishes itself through simplification and condensation of complex facts. This book is an indispensable resource for professionals working directly or indirectly with medical systems and appliances every day. It is also meant for graduate and post graduate students in hospital management, medical engineering, and medical physics.
Download or read book Computed Tomography written by Willi A. Kalender and published by John Wiley & Sons. This book was released on 2011-07-07 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book offers a comprehensive and user-oriented description of the theoretical and technical system fundamentals of computed tomography (CT) for a wide readership, from conventional single-slice acquisitions to volume acquisition with multi-slice and cone-beam spiral CT. It covers in detail all characteristic parameters relevant for image quality and all performance features significant for clinical application. Readers will thus be informed how to use a CT system to an optimum depending on the different diagnostic requirements. This includes a detailed discussion about the dose required and about dose measurements as well as how to reduce dose in CT. All considerations pay special attention to spiral CT and to new developments towards advanced multi-slice and cone-beam CT. For the third edition most of the contents have been updated and latest topics like dual source CT, dual energy CT, flat detector CT and interventional CT have been added. The enclosed CD-ROM again offers copies of all figures in the book and attractive case studies, including many examples from the most recent 64-slice acquisitions, and interactive exercises for image viewing and manipulation. This book is intended for all those who work daily, regularly or even only occasionally with CT: physicians, radiographers, engineers, technicians and physicists. A glossary describes all the important technical terms in alphabetical order. The enclosed DVD again offers attractive case studies, including many examples from the most recent 64-slice acquisitions, and interactive exercises for image viewing and manipulation. This book is intended for all those who work daily, regularly or even only occasionally with CT: physicians, radiographers, engineers, technicians and physicists. A glossary describes all the important technical terms in alphabetical order.
Download or read book Introduction to Computed Tomography written by Lois E. Romans and published by Lippincott Williams & Wilkins. This book was released on 1995 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: Takes technical process of CT scanning and breaks it down to digestible components. Provides technical detail essential to understanding the modality.
Download or read book Micro computed Tomography micro CT in Medicine and Engineering written by Kaan Orhan and published by Springer. This book was released on 2019-07-25 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on applications of micro CT, CBCT and CT in medicine and engineering, comprehensively explaining the basic principles of these techniques in detail, and describing their increasing use in the imaging field. It particularly highlights the scanning procedure, which represents the most crucial step in micro CT, and discusses in detail the reconstruction process and the artifacts related to the scanning processes, as well as the imaging software used in analysis. Written by international experts, the book illustrates the application of micro CT in different areas, such as dentistry, medicine, tissue engineering, aerospace engineering, geology, material engineering, civil engineering and additive manufacturing. Covering different areas of application, the book is of interest not only to specialists in the respective fields, but also to broader audience of professionals working in the fields of imaging and analysis, as well as to students of the different disciplines.
Download or read book X Ray Computed Tomography in Biomedical Engineering written by Robert Cierniak and published by Springer Science & Business Media. This book was released on 2011-01-06 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computed Tomography gives a detailed overview of various aspects of computed tomography. It discusses X-ray CT tomography from a historical point of view, the design and physical operating principles of computed tomography apparatus, the algorithms of image reconstruction and the quality assessment criteria of tomography scanners. Algorithms of image reconstruction from projections, a crucial problem in medical imaging, are considered in depth. The author gives descriptions of the reconstruction methods related to tomography scanners with a parallel X-ray beam, trough solutions with fan-shaped beam and successive modifications of spiral scanners. Computed Tomography contains a dedicated chapter for those readers who are interested in computer simulations based on studies of reconstruction algorithms. The information included in this chapter will enable readers to create a simulation environment in which virtual tomography projections can be obtained in all basic projection systems. This monograph is a valuable study on computed tomography that will be of interest to advanced students and researchers in the fields of biomedical engineering, medical electronics, computer science and medicine.
Download or read book Spiral and Multislice Computed Tomography of the Body written by Mathias Prokop and published by Thieme. This book was released on 2011-01-01 with total page 1108 pages. Available in PDF, EPUB and Kindle. Book excerpt: All you need to know to maximize the diagnostic capabilities of CT . . . Whole body computed tomography has developed at a rapid pace in the past decade, spurred on by the introduction of spiral and multislice scanning. These new technologies have not only improved diagnostic accuracy, but also made new applications possible that were previously accessible only through more complex or invasive techniques. This new book expertly fills a gap in the literature by combining the practically relevant technical background with the clinical information required for correctly performing and interpreting CT examinations. The book presents the state-of-the-art capabilities and requirements of CT as a key diagnostic and interventional tool, with special emphasis on the role of spiral and multi-slice CT. You will find a thorough introduction to CT technology from scanner design to 3D image reconstruction, useful practical hints on how to optimize your examination protocols and how to keep the radiation exposure of your patients to a minimum, as well as an extensive clinical section in which symptoms, pathology and CT morphology are integrated to provide you with the basis for subtle interpretation of CT findings using the most modern CT techniques. Highlights include: Full coverage of single-slice, 4-slice and 16-slice scanning techniques Introduction to extended CT applications including cardiac CT, CT fluoroscopy, and 3D image processing Organ-specific protocols for scanning and contrast administration Practical guidelines for maximizing image quality and minimizing radiation exposure Useful suggestions for image interpretation and for avoiding pitfalls and errors Convenient format by organ system and disease entity Full discussion of organ-specific pathology and CT morphology CT indications integrated with other imaging modalities At a time when CT examinations are becoming more technically demanding and complex, with an increasing number of scan parameters and advances in 3D reconstructions, this book is an essential professional tool. Experienced practitioners will find their diagnostic and technical skills improved by reading the book, and beginners will enjoy the clear, systematic approach that will help them use the technique with confidence.
Download or read book Computed Tomography written by Euclid Seeram and published by Saunders. This book was released on 2009 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Radiologic technologists play an important role in the care and management of patients undergoing advanced imaging procedures. This new edition provides the up-to-date information and thorough coverage you need to understand the physical principles of computed tomography (CT) and safely produce high-quality images. You'll gain valuable knowledge about the practice of CT scanning, effective communication with other medical personnel, and sectional anatomic images as they relate to CT. Features a chapter devoted to quality control testing of CT scanners (both spiral CT and conventional scan-and-stop), helping you achieve and maintain high quality control standards. Provides the latest information on: advances in volume CT scanning; CT fluoroscopy; multi-slice spiral/helical CT; and multi-slice applications such as 3-D imaging, CT angiography, and virtual reality imaging (endoscopy)--all with excellent coverage of state-of-the-art principles, instrumentation, clinical applications and quality control. Two new chapters cover recent developments and important principles of multislice CT and PET/CT, giving you in-depth coverage of these quickly emerging aspects of CT.
Download or read book Computed Tomography for Technologists Exam Review written by Lois Romans and published by Lippincott Williams & Wilkins. This book was released on 2018-07-23 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher's Note: Products purchased from 3rd Party sellers are not guaranteed by the Publisher for quality, authenticity, or access to any online entitlements included with the product. Computed Tomography for Technologists: Exam Review, Second Edition, is intended to be used as a companion to Computed Tomography for Technologists: A Comprehensive Text, Second Edition, and as a review of computed tomography on its own. This is an excellent resource for students preparing to take the advanced level certification exam offered by The American Registry of Radiologic Technologists (ARRT).
Download or read book Principles of Computerized Tomographic Imaging written by Avinash C. Kak and published by SIAM. This book was released on 2001-01-01 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive, tutorial-style introduction to the algorithms necessary for tomographic imaging.
Download or read book Cone Beam Computed Tomography written by Chris C. Shaw and published by Taylor & Francis. This book was released on 2014-02-14 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conventional computed tomography (CT) techniques employ a narrow array of x-ray detectors and a fan-shaped x-ray beam to rotate around the patient to produce images of thin sections of the patient. Large sections of the body are covered by moving the patient into the rotating x-ray detector and x-ray source gantry. Cone beam CT is an alternative technique using a large area detector and cone-shaped x-ray beam to produce 3D images of a thick section of the body with one full angle (360 degree or 180 degree plus detector coverage) rotation. It finds applications in situations where bulky, conventional CT systems would interfere with clinical procedures or cannot be integrated with the primary treatments or imaging systems. Cone Beam Computed Tomography explores the past, present, and future state of medical x-ray imaging while explaining how cone beam CT, with its superior spatial resolution and compact configuration, is used in clinical applications and animal research. The book: Supplies a detailed introduction to cone beam CT, covering basic principles and applications as well as advanced techniques Explores state-of-the-art research and future developments while examining the fundamental limitations of the technology Addresses issues related to implementation and system characteristics, including image quality, artifacts, radiation dose, and perception Reviews the historical development of medical x-ray imaging, from conventional CT techniques to volumetric 3D imaging Discusses the major components of cone beam CT: image acquisition, reconstruction, processing, and display A reference work for scientists, engineers, students, and imaging professionals, Cone Beam Computed Tomography provides a solid understanding of the theory and implementation of this revolutionary technology.
Download or read book Fundamentals of Computerized Tomography written by Gabor T. Herman and published by Springer Science & Business Media. This book was released on 2009-07-14 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revised and updated second edition – now with two new chapters - is the only book to give a comprehensive overview of computer algorithms for image reconstruction. It covers the fundamentals of computerized tomography, including all the computational and mathematical procedures underlying data collection, image reconstruction and image display. Among the new topics covered are: spiral CT, fully 3D positron emission tomography, the linogram mode of backprojection, and state of the art 3D imaging results. It also includes two new chapters on comparative statistical evaluation of the 2D reconstruction algorithms and alternative approaches to image reconstruction.
