Download or read book Intro to Computer Based Control Systems written by and published by Bookboon. This book was released on with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computer Aided Control Systems Design written by Cheng Siong Chin and published by CRC Press. This book was released on 2012-12-12 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer-Aided Control Systems Design: Practical Applications Using MATLAB® and Simulink® supplies a solid foundation in applied control to help you bridge the gap between control theory and its real-world applications. Working from basic principles, the book delves into control systems design through the practical examples of the ALSTOM gasifier system in power stations and underwater robotic vehicles in the marine industry. It also shows how powerful software such as MATLAB® and Simulink® can aid in control systems design. Make Control Engineering Come Alive with Computer-Aided Software Emphasizing key aspects of the design process, the book covers the dynamic modeling, control structure design, controller design, implementation, and testing of control systems. It begins with the essential ideas of applied control engineering and a hands-on introduction to MATLAB and Simulink. It then discusses the analysis, model order reduction, and controller design for a power plant and the modeling, simulation, and control of a remotely operated vehicle (ROV) for pipeline tracking. The author explains how to obtain the ROV model and verify it by using computational fluid dynamic software before designing and implementing the control system. In addition, the book details the nonlinear subsystem modeling and linearization of the ROV at vertical plane equilibrium points. Throughout, the author delineates areas for further study. Appendices provide additional information on various simulation models and their results. Learn How to Perform Simulations on Real Industry Systems A step-by-step guide to computer-aided applied control design, this book supplies the knowledge to help you deal with control problems in industry. It is a valuable reference for anyone who wants a better understanding of the theory and practice of basic control systems design, analysis, and implementation.
Download or read book An Introduction to Control Systems written by K Warwick and published by World Scientific Publishing Company. This book was released on 1996-01-31 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: This significantly revised edition presents a broad introduction to Control Systems and balances new, modern methods with the more classical. It is an excellent text for use as a first course in Control Systems by undergraduate students in all branches of engineering and applied mathematics. The book contains: A comprehensive coverage of automatic control, integrating digital and computer control techniques and their implementations, the practical issues and problems in Control System design; the three-term PID controller, the most widely used controller in industry today; numerous in-chapter worked examples and end-of-chapter exercises. This second edition also includes an introductory guide to some more recent developments, namely fuzzy logic control and neural networks.
Download or read book Real Time Computer Control An Introduction 2 E written by Sturt Bennett and published by Pearson Education India. This book was released on 1994 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Real Time Computer Control an Introduction written by Stuart Bennett and published by . This book was released on 1987 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Intelligent Control Systems written by Katalin M. Hangos and published by Springer Science & Business Media. This book was released on 2001 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: For advanced undergraduates and graduate engineering students, an introductory text to a rapidly developing, interdisciplinary field. It covers the fundamentals of designing, implementing, and operating intelligent control systems, which emerged from artificial intelligence and computer-controlled systems. It summarizes the basics of knowledge representation, reasoning expert systems, and real-time control systems and describes special tools and techniques applied in intelligent control, such as qualitative modeling, Petri nets, and fuzzy controllers. Annotation copyrighted by Book News Inc., Portland, OR.
Download or read book Computer Based Industrial Control 2 e written by Kant and published by PHI Learning Pvt. Ltd.. This book was released on 2011-07-30 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its second edition, this text presents the fundamentals of computer-based control of industrial processes. Intended primarily for undergraduate and postgraduate students of instrumentation and electronics engineering, the book will also be useful for professionals and researchers in these fields.
Download or read book Computer Aided Design of Control Systems written by Michel A. Cuénod and published by Pergamon. This book was released on 1980 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and analysis methods for plants, controllers and control systems; Program packages and programming languages for design purposes; Computer assisted planning; CAD in research, development and instruction; Applications; Lata papers; Survey papers; Round table discussions.
Download or read book Digital Computer Control Systems written by Gurvinder S. Virk and published by . This book was released on 1991 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital control methods are replacing most conventional analogue systems. The aim of this book is to present an up-to-date introduction to these systems, and to instruct and assist readers so that they are able to connect computers to real systems for control and/or analysis purposes.
Download or read book Introduction to Control System Technology written by Robert Bateson and published by Merrill Publishing Company. This book was released on 1980 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Digital Control Systems written by Ioan Doré Landau and published by Springer Science & Business Media. This book was released on 2007-05-11 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: The extraordinary development of digital computers (microprocessors, microcontrollers) and their extensive use in control systems in all fields of applications has brought about important changes in the design of control systems. Their performance and their low cost make them suitable for use in control systems of various kinds which demand far better capabilities and performances than those provided by analog controllers. However, in order really to take advantage of the capabilities of microprocessors, it is not enough to reproduce the behavior of analog (PID) controllers. One needs to implement specific and high-performance model based control techniques developed for computer-controlled systems (techniques that have been extensively tested in practice). In this context identification of a plant dynamic model from data is a fundamental step in the design of the control system. The book takes into account the fact that the association of books with software and on-line material is radically changing the teaching methods of the control discipline. Despite its interactive character, computer-aided control design software requires the understanding of a number of concepts in order to be used efficiently. The use of software for illustrating the various concepts and algorithms helps understanding and rapidly gives a feeling of the various phenomena.
Download or read book Feedback Control for Computer Systems written by Philipp K. Janert and published by "O'Reilly Media, Inc.". This book was released on 2013-09-19 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: How can you take advantage of feedback control for enterprise programming? With this book, author Philipp K. Janert demonstrates how the same principles that govern cruise control in your car also apply to data center management and other enterprise systems. Through case studies and hands-on simulations, you’ll learn methods to solve several control issues, including mechanisms to spin up more servers automatically when web traffic spikes. Feedback is ideal for controlling large, complex systems, but its use in software engineering raises unique issues. This book provides basic theory and lots of practical advice for programmers with no previous background in feedback control. Learn feedback concepts and controller design Get practical techniques for implementing and tuning controllers Use feedback “design patterns” for common control scenarios Maintain a cache’s “hit rate” by automatically adjusting its size Respond to web traffic by scaling server instances automatically Explore ways to use feedback principles with queueing systems Learn how to control memory consumption in a game engine Take a deep dive into feedback control theory
Download or read book Distributed Computer Control Systems in Industrial Automation written by VijayP. Bhatkar and published by Routledge. This book was released on 2017-11-22 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: A reference guide for professionals or text for graduate and postgraduate students, this volume emphasizes practical designs and applications of distributed computer control systems. It demonstrates how to improve plant productivity, enhance product quality, and increase the safety, reliability, and
Download or read book Safety of Computer Control Systems 1983 Safecomp 83 written by J. A. Baylis and published by Elsevier. This book was released on 2014-05-17 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety of Computer Control Systems 1983: Achieving Safe Real Time Computer Systems contains the proceedings of the Third IFAC/IFIP Workshop held at Cambridge, UK on September 20-22, 1983. Composed of 36 chapters, separated into the eight sessions of the workshop, this book begins with a discussion of the safety and reliability of computer control systems. Subsequent chapters explore the systems design for safety and reliability; fault tolerance, recovery, and use of redundancy; and aspects of fault tolerance for system reliability. Other chapters detail specification techniques; system development and quality assurance; verifications and validations; case studies; as well as scheduling, networks, and communications.
Download or read book Microprocessor Based Control Systems written by N.K. Sinha and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent advances in LSI technology and the consequent availability of inexpensive but powerful microprocessors have already affected the process control industry in a significant manner. Microprocessors are being increasingly utilized for improving the performance of control systems and making them more sophisticated as well as reliable. Many concepts of adaptive and learning control theory which were considered impractical only 20 years ago are now being implemented. With these developments there has been a steady growth in hardware and software tools to support the microprocessor in its complex tasks. With the current trend of using several microprocessors for performing the complex tasks in a modern control system, a great deal of emphasis is being given to the topic of the transfer and sharing of information between them. Thus the subject of local area networking in the industrial environment has become assumed great importance. The object of this book is to present both hardware and software concepts that are important in the development of microprocessor-based control systems. An attempt has been made to obtain a balance between theory and practice, with emphasis on practical applications. It should be useful for both practicing engineers and students who are interested in learning the practical details of the implementation of microprocessor-based control systems. As some of the related material has been published in the earlier volumes of this series, duplication has been avoided as far as possible.
Download or read book Computer Aided Control System Design Methods Tools And Related Topics written by Mietek A Brdys and published by World Scientific. This book was released on 1994-04-20 with total page 559 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is about Computer Aided Control System Design (CACSD) of the direct process controller. Various methods and tools, representing an up-to-date level of development, are presented by leading experts. Several articles describe main principles and problems associated with modern direct control and with CACSD. Existing tools are presented, including packages for stability analysis of nonlinear systems, adaptive control design and integrated analysis, and simulation and tuning of controllers. The reader can observe that it is possible to develop CACSD tools by using open general packages such as Matlab or Simulab, or by providing specialised software. He can then compare both approaches and get an improved understanding of their respective advantages and disadvantages. The leading article by the editors presents CACSD Methods and tools in a broader context. There is also detailed material on upper control layers, hierarchical control, and real-time systems.
Download or read book Safety of Computer Control Systems 1985 Safecomp 85 written by W. J. Quirk and published by Elsevier. This book was released on 2016-06-03 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety of Computer Control Systems 1985 (Safecomp '85): Achieving Safe Real Time Computer Systems presents the proceedings of the Fourth IFAC Workshop, held in Como, Italy, on October 1–3, 1985. This book discusses a wide range of topics ranging from direct process control through robotics to operator assistance. Organized into 28 chapters, this compilation of papers begins with an overview of the implementation of atomic actions by means of concurrent programming constructs. This text then examines the safety-related applications that usually demand the provision of redundant resources within the system. Other chapters consider the safe performance of an industrial robot system that relies on several factors. This book discusses as well the increasing demand for Computer Assisted Decision Making (CADM) both in engineering and service industries. The final chapter deals with the ways of reducing the effects of an error introduced during the design of a program. This book is a valuable resource for software engineers.
