Download or read book Interstitial Intermetallic Alloys written by F. Grandjean and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is well known that the density of molecular hydrogen can be increased by compression and/or cooling, the ultimate limit in density being that of liquid hydrogen. It is less well known that hydrogen densities of twice that of liquid hydrogen can be obtained by intercalating hydrogen gas into metals. The explanation of this unusual paradox is that the absorption of molecular hydrogen, which in TiFe and LaNis is reversible and occurs at ambient temperature and pressure, involves the formation of hydrogen atoms at the surface of a metal. The adsorbed hydrogen atom then donates its electron to the metal conduction band and migrates into the metal as the much smaller proton. These protons are easily accomodated in interstitial sites in the metal lattice, and the resulting metal hydrides can be thought of as compounds formed by the reaction of hydrogen with metals, alloys, and intermetallic compounds. The practical applications of metal hydrides span a wide range of technologies, a range which may be subdivided on the basis of the hydride property on which the application is based. The capacity of the metal hydrides for hydrogen absorption is the basis for batteries as well as for hydrogen storage, gettering, and purification. The temperature-pressure characteristics of metal hydrides are the basis for hydrogen compressors, sensors, and actuators. The latent heat of the hydride formation is the basis for heat storage, heat pumps, and refrigerators.
Download or read book Interstitial Alloys written by H. J. Goldschmidt and published by Elsevier. This book was released on 2016-01-22 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interstitial Alloys covers the significant progress in the development and understanding of the principles and applications of interstitial alloys. Interstitial alloy refers to the existence of a pure metal lattice, which the metal-metal atom bond remains the dominant one, and the non-metal atoms are sufficiently small to be accommodated within the metal lattice without, or with only a limited degree of, distortion from metal-type symmetry. This book contains 10 chapters and begins with a brief introduction to the basic principles of interstitial alloys. The next two chapters describe the physical properties of these alloys, along with their behavior in solid solutions. The remaining chapters deal with a specific interstitial alloy, its structure, physico-chemical properties, preparation, and application. This work specifically considers carbide, nitride, boride, silicide, oxide, hydride, and mixed interstitial alloys. This book will be of value to chemists and physicists.
Download or read book Constitution and Magnetism of Iron and its Alloys written by Werner Pepperhoff and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the foundations of understanding the physical nature of iron and its alloys. Basics and recent developments concerning its constitution and magnetism are presented as well as its thermal properties.
Download or read book Intermetallic Compounds Principles written by Jack Hall Westbrook and published by . This book was released on 1995 with total page 1178 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Interstitial and Substitutional Solute Effects in Intermetallics written by Ian Baker and published by Minerals, Metals, & Materials Society. This book was released on 1998 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume from the 1998 TMS Fall Meeting addresses recent developments in the effects of interstitial and substitutional solute atoms on the physical and mechanical properties of intermetallic compounds. Topics discussed include the theory, modeling, and experimental verification of such effects as static and dynamic strain aging, the Portevin-le Chatelier effect, solid solution hardening behavior, and dislocation-solute interactions.
Download or read book Alloys and Intermetallic Compounds written by Cristina Artini and published by CRC Press. This book was released on 2017-07-12 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the role of modeling in the design of alloys and intermetallic compounds. It includes an introduction to the most important and most used modeling techniques, such as CALPHAD and ab-initio methods, as well as a section devoted to the latest developments in applications of alloys. The book emphasizes the correlation between modeling and technological developments while discussing topics such as wettability of Ultra High Temperature Ceramics by metals, active brazing of diamonds to metals in cutting tools, surface issues in medicine, novel Fe-based superconductors, metallic glasses, high entropy alloys, and thermoelectric materials.
Download or read book High Entropy Alloys written by B.S. Murty and published by Elsevier. This book was released on 2019-03-16 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-Entropy Alloys, Second Edition provides a complete review of the current state of the field of high entropy alloys (HEA). Building upon the first edition, this fully updated release includes new theoretical understandings of these materials, highlighting recent developments on modeling and new classes of HEAs, such as Eutectic HEAs and Dual phase HEAs. Due to their unique properties, high entropy alloys have attracted considerable attention from both academics and technologists. This book presents the fundamental knowledge, the spectrum of various alloy systems and their characteristics, key focus areas, and the future scope of the field in terms of research and technological applications. Provides an up-to-date, comprehensive understanding on the current status of HEAs in terms of theoretical understanding and modeling efforts Gives a complete idea on alloy design criteria of various classes of HEAs developed so far Discusses the microstructure property correlations in HEAs in terms of structural and functional properties Presents a comparison of HEAs with other multicomponent systems, like intermetallics and bulk metallic glasses
Download or read book Interstitial Alloys written by Harvey J. Goldschmid and published by . This book was released on 2014-09-01 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Properties And Applications Of Complex Intermetallics written by Esther Belin-ferre and published by World Scientific. This book was released on 2009-08-11 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complex metal alloys (CMAs) comprise a huge group of largely unknown alloys and compounds, where many phases are formed with crystal structures based on giant unit cells containing atom clusters, ranging from tens of to more than thousand atoms per unit cell. In these phases, for many phenomena, the physical length scales are substantially smaller than the unit-cell dimension. Hence, these materials offer unique combinations of properties which are mutually exclusive in conventional materials, such as metallic electric conductivity combined with low thermal conductivity, good light absorption with high-temperature stability, high metallic hardness with reduced wetting by liquids, etc.This book is the second of a series of books issued yearly as a deliverable to the European Community of the School established within the European Network of Excellence CMA. Written by reputed experts in the fields of metal physics, surface physics, surface chemistry, metallurgy, and process engineering, this book brings together expertise found inside as well as outside the network to provide a comprehensive overview of the current state of knowledge in CMAs.
Download or read book The Structures of Alloys of Iron written by W. Hume-Rothery and published by Elsevier. This book was released on 2016-01-26 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Structures of Alloys of Iron: An Elementary Introduction provides an elementary review of some of the factors affecting the structures of alloys of iron, with examples illustrating points of interest. In view of the existence of books dealing with the technology and properties of iron alloys it was decided that the present book should be concerned only with the structures, and not with the properties of the alloys. In connection with steels it was thought best, in the space available, to deal only with those based on iron-carbon alloys. The book begins with chapters on the metal iron, the crystal structures of iron, the diffusion of iron and its alloys, and the intermetallic chemistry of iron. Subsequent chapters deal with the structure of steels, plain carbon steels, the structure of alloy steels, and cast irons. This book is intended for those wanting to make a general survey of the subject before undertaking a detailed study. The reader must understand clearly that much further work will be necessary before he can hope to understand properly even one class of the alloys of industry .
Download or read book Fundamentals of Creep in Metals and Alloys written by Michael E. Kassner and published by Elsevier. This book was released on 2004-04-06 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Numerous line drawings with consistent format and units allow easy comparison of the behavior of a very wide range of materials * Transmission electron micrographs provide a direct insight in the basic microstructure of metals deforming at high temperatures * Extensive literature review of over 1000 references provide an excellent reference document, and a very balanced discussion Understanding the strength of materials at a range of temperatures is critically important to a huge number of researchers and practitioners from a wide range of fields and industry sectors including metallurgists, industrial designers, aerospace R&D personnel, and structural engineers. The most up-to date and comprehensive book in the field, Fundamentals of Creep in Metals and Alloys discusses the fundamentals of time-dependent plasticity or creep plasticity in metals, alloys and metallic compounds. This is the first book of its kind that provides broad coverage of a range of materials not just a sub-group such as metallic compounds, superalloys or crystals. As such it presents the most balanced view of creep for all materials scientists. The theory of all of these phenomena are extensively reviewed and analysed in view of an extensive bibliography that includes the most recent publications in the field. All sections of the book have undergone extensive peer review and therefore the reader can be sure they have access to the most up-to-date research, fully interrogated, from the world’s leading investigators. · Numerous line drawings with consistent format and units allow easy comparison of the behavior of a very wide range of materials· Transmission electron micrographs provide a direct insight in the basic microstructure of metals deforming at high temperatures· Extensive literature review of over 1000 references provide an excellent reference document, and a very balanced discussion
Download or read book High Entropy Alloys written by Michael C. Gao and published by Springer. This book was released on 2016-04-27 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a systematic and comprehensive description of high-entropy alloys (HEAs). The authors summarize key properties of HEAs from the perspective of both fundamental understanding and applications, which are supported by in-depth analyses. The book also contains computational modeling in tackling HEAs, which help elucidate the formation mechanisms and properties of HEAs from various length and time scales.
Download or read book Structure Induced Anelasticity in Iron Intermetallic Compounds and Alloys written by Igor S. Golovin and published by Materials Research Forum LLC. This book was released on 2018-04-01 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Different anelastic phenomena are discussed in this book with respect to iron-based binary and ternary alloys and intermetallic compounds of Fe3Me type, where Me are α-stabilizing elements Al, Ga, or Ge. An introduction into anelastic behavior of metallic materials is given, and methods of mechanical spectroscopy and neutron diffraction are introduced for the better understanding of structure-related relaxation and hysteretic phenomena. To characterize structure and phase transitions - both first and second order - in the studied alloys XRD, TEM, SEM, MFM, VSM, PAS, DSC techniques were used. Considerable emphasis is placed on in situ neutron diffraction tests that were performed with the same heating and cooling rates as the internal friction measurements. Different types of mechanical spectroscopy techniques were used to study mainly, but not exclusively, Fe-Al, Fe-Ga and Fe-Ge based alloys: from subresonance “low” frequency forced bending and torsion vibrations (0.00001 to 200 Hz) to “high” frequency resonance (above ~200 Hz) free decay bending vibrations. We discuss (1) thermally activated effects like Snoek-type relaxation, caused by interstitial atom jumps in alloyed ferrite, (2) Zener relaxation, caused by reorientation of pairs of substitute atoms in iron, (3) different transient effects due to phase transitions of the first and second order, and (4) amplitude dependent magneto-mechanical damping; especially with respect to structure, ordering of substitutional solid solution and phase transitions. Special attention is paid to magnetostriction of the alloys - the result of magneto-mechanical elastic coupling.
Download or read book Vacancies and Interstitials in Metals and Alloys written by Christian Abromeit and published by . This book was released on 1987 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Alloys written by Daniel Klempner and published by Springer. This book was released on 2012-02-17 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: Alloy is a term commonly associated with metals and implies a composite which may be sinqle phase (solid solution) or heterophase. Whichever the case, metallic alloys generally exist because they exhibit improved properties over the base metal. There are numer ous types of metallic alloys, including interstitial solid solutions, substitutional solid solutions, and multiphase combinations of these with intermetallic compounds, valency compounds, electron compounds, etc. A similar situation exists with polymers. There are numerous types of composites, or "alloys" of polymers in existence today with new ones being created continuously. Polyblends are simple physical mixtures of the constituent polymers with no covalent bonds occuring between them. As with metals, these may be homogeneous (single phase) solid solytions or heterogeneous (multiple phase) mixtures. With polymers, the latter case is by far the most prevalent situation due to the thermodynamic incompatibility of most polymers. This is due to the relatively small gain in entropy upon mixing the polymers due to contiguity restrictions imposed by their large chain length.
Download or read book Oxidation of Intermetallics written by Hans Jürgen Grabke and published by John Wiley & Sons. This book was released on 2008-07-11 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last ten years vast efforts were made in the research and development of intermetallic compounds to attain improved high temperature strength and low temperature ductility. These new structural materials are used in several high-temperature applications like engines and turbines. Oxidation and corrosion resistance are as important for the current applications of these materials as mechanical properties. This book gives a sound review of the present knowledge of the oxidation kinetics and mechanisms of intermetallics. Especially Ti-, Ni- and Fe-aluminides are treated in detail by experts from Europe, USA and Japan. The information provided will be of wealth for any engineer and scientist- materials scientist, physicist or chemist - involved in the development of new intermetallic materials and their applications.
Download or read book Intermetallic Compounds Basic Mechanical Properties and Lattice Defects of written by J. H. Westbrook and published by Wiley. This book was released on 2000-06-15 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is one of four, each of which consists of reprinted chapters from the highly acclaimed, comprehensive two-volume set Intermetallic Compounds: Principles and Practice, published in 1995. In some cases the author or authors have added a brief addendum to bring their chapter up to date and in other cases more recent references have been added. Chapters have been selected and grouped in subject areas to provide more easily accessible and user-friendly volumes for individual researchers. The other titles in this four-volume set are: Crystal Structures of Intermetallic Compounds Structural Applications of Intermetallic Compounds Magnetic, Electrical and Optical Properties and Applications of Intermetallic Compounds
