Download or read book Interpretation of Constraint Effects Under PTS Conditions Based on J Q Fracture Methodology written by DKM Shum and published by . This book was released on 1995 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study explores the possibility of using J-Q-related constraint concepts to describe the nature of the crack-tip loading in a reactor pressure vessel (RPV) under pressurized thermal shock (PTS) conditions. The fracture response of an RPV subjected to three postulated PTS transients that incorporate effects of loading, unloading and reloading (via repressurization) of the crack tip has been examined. Analysis results indicate that minimal loss of constraint relative to conditions of K-dominant small-scale yielding (SSY) is observed during the monotonic-loading phase of the transients. The extent of constraint loss upon reloading is sensitive to the time of repressurization, with minimal (significant) loss of constraint observed for the transient with "early" ("late") repressurization. The nature of the constraint loss, when it occurs, corresponds to a spatially varying hydrostatic field relative to K-dominant SSY conditions. Based on an assumed correlation between loss of crack-tip constraint and fracture toughness, preliminary analysis results indicate that inclusion of constraint effects could provide significant reduction in the value of the calculated conditional probability of vessel failure relative to their exclusion.
Download or read book Constraint Effects in Fracture Theory and Applications written by Mark Kirk and published by ASTM International. This book was released on 1995 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fracture Mechanics written by John D. Landes and published by ASTM International. This book was released on 1994 with total page 805 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 3 D Constraint Effects on Models for Transferability of Cleavage Fracture Toughness written by RH. Dodds and published by . This book was released on 1997 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the late 1980s there has been renewed interest and progress in understanding the effects of constraint on transgranular cleavage in ferritic steels. Research efforts to characterize the complex interaction of crack tip separation processes with geometry, loading mode and material flow properties proceed along essentially two major lines of investigation: (1) multi-parameter descriptions of stationary crack-tip fields under large-scale yielding conditions, and (2) rational micromechanics models for the description of cleavage fracture which also reflect the observed scatter in the ductile-to-brittle transition (DBT) region. This article reviews the essential features of a specific example representing each approach: the J-Q extension to correlative fracture mechanics and a local approach based on the Weibull stress. Discussions focus on the growing body of 3-D numerical solutions for common fracture specimens which, in certain cases, prove significantly different from long-established plane-strain results.
Download or read book Interpretation of Warm Prestress Induced Fracture Toughness Based on Crack Tip Constraint written by DKM Shum and published by . This book was released on 1995 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study explores the possibility of using J-Q-related crack-tip constraint concepts to provide a basis for both the interpretation of warm prestress (WPS)-induced fracture toughness and its transferability to structural applications. A finite-element boundary-layer formulation based on small-scale yielding (SSY), remote mode I K-dominant assumptions is adopted. Effects of WPS-induced crack-tip constraint are quantified in terms of deviation in either the opening-mode or the mean stress component of the WPS crack-tip fields relative to the reference K-dominant SSY state associated with monotonic-loading conditions. Over the range of WPS load-paths considered the WPS-induced crack-tip constraint closely resembles a spatially varying hydrostatic stress field. Interpretation and transferability of WPS fracture toughness under SSY conditions are specified in terms of the unload and reload ratio.
Download or read book Basketball Sports Medicine and Science written by Lior Laver and published by Springer Nature. This book was released on 2020-10-05 with total page 1018 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is designed as a comprehensive educational resource not only for basketball medical caregivers and scientists but for all basketball personnel. Written by a multidisciplinary team of leading experts in their fields, it provides information and guidance on injury prevention, injury management, and rehabilitation for physicians, physical therapists, athletic trainers, rehabilitation specialists, conditioning trainers, and coaches. All commonly encountered injuries and a variety of situations and scenarios specific to basketball are covered with the aid of more than 200 color photos and illustrations. Basketball Sports Medicine and Science is published in collaboration with ESSKA and will represent a superb, comprehensive educational resource. It is further hoped that the book will serve as a link between the different disciplines and modalities involved in basketball care, creating a common language and improving communication within the team staff and environment.
Download or read book Analysis and Performance of Fiber Composites written by Bhagwan D. Agarwal and published by Wiley-Interscience. This book was released on 1990-10-08 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Having fully established themselves as workable engineering materials, composite materials are now increasingly commonplace around the world. Serves as both a text and reference guide to the behavior of composite materials in different engineering applications. Revised for this Second Edition, the text includes a general discussion of composites as material, practical aspects of design and performance, and further analysis that will be helpful to those engaged in research on composites. Each chapter closes with references for further reading and a set of problems that will be useful in developing a better understanding of the subject.
Download or read book Nutrition Diagnosis written by American Dietetic Association and published by . This book was released on 2006 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rules of Thumb for Mechanical Engineers written by J. Edward Pope and published by Gulf Professional Publishing. This book was released on 1997 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluids -- Heat transfer -- Thermodynamics -- Mechanical seals -- Pumps and compressors -- Drivers -- Gears -- Bearings -- Piping and pressure vessels -- Tribology -- Vibration -- Materials -- Stress and strain -- Fatigue -- Instrumentation -- Engineering economics.
Download or read book Heterostructured Materials written by Xiaolei Wu and published by CRC Press. This book was released on 2021-11-24 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heterostructured (HS) materials represent an emerging class of materials that are expected to become a major research field for the communities of materials, mechanics, and physics in the next couple of decades. One of the biggest advantages of HS materials is that they can be produced by large-scale industrial facilities and technologies and therefore can be commercialized without the scaling up and high-cost barriers that are often encountered by other advanced materials. This book collects recent papers on the progress in the field of HS materials, especially their fundamental physics. The papers are arranged in a sequence of chapters that will help new researchers entering the field to have a quick and comprehensive understanding of HS materials, including the fundamentals and recent progress in their processing, characterization, and properties.
Download or read book Active Protective Coatings written by Anthony E. Hughes and published by Springer. This book was released on 2016-03-01 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a broad range of materials science that has been brought to bear on providing solutions to the challenges of developing self-healing and protective coatings for a range of metals. The book has a strong emphasis on characterisation techniques, particularly new techniques that are beginning to be used in the coatings area. It features many contributions written by experts from various industrial sectors which examine the needs of the sectors and the state of the art. The development of self-healing and protective coatings has been an expanding field in recent years and applies a lot of new knowledge gained from other fields as well as other areas of materials science to the development of coatings. It has borrowed from fields such as the food and pharmaceutical industries who have used, polymer techniques, sol-gel science and colloidosome technology for a range encapsulation techniques. It has also borrowed from fields like hydrogen storage such as from the development of hierarchical and other materials based on organic templating as “nanocontainers” for the delivery of inhibitors. In materials science, recent developments in high throughput and other characterisation techniques, such as those available from synchrotrons, are being increasing used for novel characterisation – one only needs to look at the application of these techniques in self healing polymers to gauge wealth of new information that has been gained from these techniques. This work is largely driven by the need to replace environmental pollutants and hazardous chemicals that represent risk to humans such as chromate inhibitors which are still used in some applications.
Download or read book Musculoskeletal Infection written by John L. Esterhai and published by . This book was released on 1992 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text provides a guide to understanding the mechanisms involved in the pathogenesis of muscoskeletal sepsis. It covers areas such as bone, cartilage, soft tissue, and biomaterial interaction in the face of infection.
Download or read book Aerospace Materials and Applications written by Biliyar N. Bhat and published by . This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The present volume is focused on documenting the novel processing, fabrication, characterization, and testing approaches that are unique to aerospace materials/structures/systems"--Preface.
Download or read book Facial Palsy written by Chieh-Han John Tzou and published by Springer Nature. This book was released on 2021-05-27 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive overview of the surgical techniques available in reconstruction of the paralyzed face. It is divided into six parts. The first part introduces the topic of facial palsy, and the following parts provide detailed information on facial nerve reconstruction techniques, management of eye closure and smile reanimation. The book highlights symmetrization techniques and synkinesis and presents innovations and new frontiers in facial palsy.Written by an international group of experts who are committed to maintaining high standards and service in treating this condition and improving outcomes, it is a valuable source of information for clinicians and practitioners in plastic and reconstructive surgery, neurosurgeons and oral-and-maxillofacial surgeons, but also useful for researchers in this field.
Download or read book Military Injury Biomechanics written by Melanie Franklyn and published by CRC Press. This book was released on 2017-06-12 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: Military Injury Biomechanics: The Cause and Prevention of Impact Injuries is a reference manual where information and data from a large number of sources, focussing on injuries related to military events, has been critically reviewed and discussed. The book covers the cause and prevention of impact injuries to all the major body regions, while topics such as the historical background of military impact biomechanics, the history and use of anthropomorphic test devices for military applications and the medical management of injuries are also discussed. An international team of experts have been brought together to examine and review the topics. The book is intended for researchers, postgraduate students and others working or studying defence and impact injuries.
Download or read book Biaxial Fatigue of Metals written by Jaap Schijve and published by Springer. This book was released on 2015-08-25 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: Problems of fatigue under multiaxial fatigue loads have been addressed in a very large number of research publications. The present publication is primarily a survey of biaxial fatigue under constant amplitude loading on metal specimens. It starts with the physical understanding of the fatigue phenomenon under biaxial fatigue loads. Various types of proportional and non-proportional biaxial fatigue loads and biaxial stress distributions in a material are specified. Attention is paid to the fatigue limit, crack nucleation, initial micro crack growth and subsequent macro-crack in different modes of crack growth. The interference between the upper and lower surfaces of a fatigue crack is discussed. Possibilities for predictions of biaxial fatigue properties are analysed with reference to the similarity concept. The significance of the present understanding for structural design problems is considered. The book is completed with a summary of major observations.
Download or read book Principles of Heat Transfer in Porous Media written by M. Kaviany and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although the empirical treatment of fluid flow and heat transfer in porous media is over a century old, only in the last three decades has the transport in these heterogeneous systems been addressed in detail. So far, single-phase flows in porous media have been treated or at least formulated satisfactorily, while the subject of two-phase flow and the related heat-transfer in porous media is still in its infancy. This book identifies the principles of transport in porous media and compares the avalaible predictions based on theoretical treatments of various transport mechanisms with the existing experimental results. The theoretical treatment is based on the volume-averaging of the momentum and energy equations with the closure conditions necessary for obtaining solutions. While emphasizing a basic understanding of heat transfer in porous media, this book does not ignore the need for predictive tools; whenever a rigorous theoretical treatment of a phenomena is not avaliable, semi-empirical and empirical treatments are given.
