Download or read book Gas Flow and Chemical Lasers written by Salman Rosenwaks and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Sixth International Symposium on Gas Flow and Chemical Lasers (GCL) was held in Jerusalem, Israel, on September 8-12, 1986. The charm and beauty of Jerusalem and the unique blending of ancient and modern made this Symposium an enjoyable experience for the 165 participants and the accompanying persons. Yet, it seems that the invited and contributed papers presented at the Symposium were equally attractive so that most of the participants attended most sessions, resisting the temptations outside the session hall. Indeed, many speakers presented up-to-date results that were obtained, or cleared, just a few days before the Symposium. This volume is a compi lation of 19 invited and 61 contributed papers and of a panel discussion on the prospects for short wavelength chemical lasers held at the closing session of the Symposium. This discussion is presented as recorded in order to re tain the flavour of spontaneous presentation at the risk - or advantage - of presenting some venturous ideas, and the danger of misquoting. In editing the book, a deductive approach has been attempted. The book starts with some fundamental issues, namely fluid dynamics and optics, and then deals with the design, diagnostics, propagation and applications of various gas laser systems, covering the wavelength spectrum from XUV to infrared. Then follow recent developments of general interest to the laser community and the book concludes with an eye to the future, i.e., with a section on short wavelength chemical lasers.
Download or read book Gas Flow and Chemical Lasers written by Michele Onorato and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains eight invited papers and seventy-three contributed papers presented at the Fourth International Symposium on Gas Flow and Chemical Lasers. which was held in Stresa. Italy. from September 13 to 17. 1984. The purpose of the Symposium was to record and discuss current research developments and applications related to high power lasers. Papers were solicited from the entire spectrum of activities, includ ing basic physics, aerothermodynamics, new laser media, laser design, diagnostic techniques, laser propagation. interaction phenom ena, applications. The Symposium was an opportunity for scientists and engineers representing all these disciplines to come together to report their recent work, to exchange ideas and to provide an up-to-date account of international progress in these fields. The contributed papers were reviewed by the members of the Scientific Advisory CoEmittee. who also took responsibility for formulating the program of invited lectures. As editor I wish to express my appreciation and my gratitude to people and organizations that made this Symposium a success: the Members of the Scientific Advisory Committee, the Members of the Local Organizing Committee, the Sponsors and the Symposium Secretary. A grateful acknowledgement is expressed to Dr. M. Sandra Oggiano for assistance in the organization of the Symposium and publication of these proceedings.
Download or read book International Symposium on Gas Flow and Chemical Lasers written by and published by . This book was released on 2001 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book XIII International Symposium on Gas Flow and Chemical Lasers written by and published by . This book was released on 2001 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Seventh International Symposium on Gas Flow and Chemical Lasers 22 26 August 1988 Vienna Austria written by Dieter Schuöcker and published by SPIE-International Society for Optical Engineering. This book was released on 1989 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book International Symposium on Gas Flow Chemical Lasers and High Power Lasers written by and published by . This book was released on 2004 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gas Flow and Chemical Lasers 1984 written by A. S. Kaye and published by . This book was released on 1985 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gas Lasers written by Masamori Endo and published by CRC Press. This book was released on 2018-10-03 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lasers with a gaseous active medium offer high flexibility, wide tunability, and advantages in cost, beam quality, and power scalability. Gas lasers have tended to become overshadowed by the recent popularity and proliferation of semiconductor lasers. As a result of this shift in focus, details on modern developments in gas lasers are difficult to find. In addition, different types of gas lasers have unique properties that are not well-described in other references. Collecting expert contributions from authorities dealing with specific types of lasers, Gas Lasers examines the fundamentals, current research, and applications of this important class of laser. It is important to understand all types of lasers, from solid-state to gaseous, before making a decision for any application. This book fills in the gaps by discussing the definition and properties of gaseous media along with its fluid dynamics, electric excitation circuits, and optical resonators. From this foundation, the discussion launches into the basic physics, characteristics, applications, and current research efforts for specific types of gas lasers: CO lasers, CO2 lasers, HF/DF lasers, excimer lasers, iodine lasers, and metal vapor lasers. The final chapter discusses miscellaneous lasers not covered in the previous chapters. Collecting hard-to-find material into a single, convenient source, Gas Lasers offers an encyclopedic survey that helps you approach new applications with a more complete inventory of laser options.
Download or read book XIII International Symposium on Gas Flow and Chemical Lasers written by and published by . This book was released on 2001 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book XI International Symposium on Gas Flow and Chemical Lasers and High power Laser Conference written by Denis R. Hall and published by Society of Photo Optical. This book was released on 1997 with total page 788 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Meetings written by United States. Department of Energy. Technical Information Center and published by . This book was released on 1986 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt: A listing of forthcoming meetings, conventions, etc.
Download or read book Future Energy Conferences and Symposia written by and published by . This book was released on 1990 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Power Lasers In Production Engineering written by Dieter Schuocker and published by World Scientific Publishing Company. This book was released on 1999-03-03 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: High power lasers of either the gas or solid state type can be used to generate a focal spot with a diameter of about a tenth of a millimetre and a power density of up to 100 Mio W/cm2. With these intensities all materials can be heated up rapidly, leading to fast melting, violent evaporation or even plasma formation. So laser beams can be utilized for various processing tasks, such as transformation hardening, cutting and ablation or welding and cladding or even rapid prototyping. With these processes, important advantages are achieved compared to conventional tools such as high processing speed due to the high concentration of energy and high quality of the processed workpiece without deformations due to the small overall heat input to the workpiece that corresponds to the small spot diameter. All these advantages finally result in strongly reduced production costs, which is the main reason for a world-wide substitution of conventional processes and other beam tools by laser technology.This monograph offers a great insight into the operation principles of high power laser sources, the phenomena of interaction of laser beams and materials and the mechanisms of the various production processes with lasers — thus enabling production engineers and others to make optimum use of the benefits of laser technology and to understand the technical properties and the physical limitations of this most recent technology (especially in comparison to conventional tools and other beam tools), and providing a sufficient basis for the understanding and use of future developments in this area.
Download or read book High Power Lasers in Production Engineering written by Dieter Schucker and published by World Scientific. This book was released on 1999 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: High power lasers of either the gas or solid state type can be used to generate a focal spot with a diameter of about a tenth of a millimetre and a power density of up to 100 Mio W/cm2. With these intensities all materials can be heated up rapidly, leading to fast melting, violent evaporation or even plasma formation. So laser beams can be utilized for various processing tasks, such as transformation hardening, cutting and ablation or welding and cladding or even rapid prototyping. With these processes, important advantages are achieved compared to conventional tools such as high processing speed due to the high concentration of energy and high quality of the processed workpiece without deformations due to the small overall heat input to the workpiece that corresponds to the small spot diameter. All these advantages finally result in strongly reduced production costs, which is the main reason for a world-wide substitution of conventional processes and other beam tools by laser technology.This monograph offers a great insight into the operation principles of high power laser sources, the phenomena of interaction of laser beams and materials and the mechanisms of the various production processes with lasers ? thus enabling production engineers and others to make optimum use of the benefits of laser technology and to understand the technical properties and the physical limitations of this most recent technology (especially in comparison to conventional tools and other beam tools), and providing a sufficient basis for the understanding and use of future developments in this area.
Download or read book The Theory of Laser Materials Processing written by John Dowden and published by Springer. This book was released on 2017-06-16 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: The revised edition of this important reference volume presents an expanded overview of the analytical and numerical approaches employed when exploring and developing modern laser materials processing techniques. The book shows how general principles can be used to obtain insight into laser processes, whether derived from fundamental physical theory or from direct observation of experimental results. The book gives readers an understanding of the strengths and limitations of simple numerical and analytical models that can then be used as the starting-point for more elaborate models of specific practical, theoretical or commercial value. Following an introduction to the mathematical formulation of some relevant classes of physical ideas, the core of the book consists of chapters addressing key applications in detail: cutting, keyhole welding, drilling, arc and hybrid laser-arc welding, hardening, cladding and forming. The second edition includes a new a chapter on glass cutting with lasers, as employed in the display industry. A further addition is a chapter on meta-modelling, whose purpose is to construct fast, simple and reliable models based on appropriate sources of information. It then makes it easy to explore data visually and is a convenient interactive tool for scientists to improve the quality of their models and for developers when designing their processes. As in the first edition, the book ends with an updated introduction to comprehensive numerical simulation. Although the book focuses on laser interactions with materials, many of the principles and methods explored can be applied to thermal modelling in a variety of different fields and at different power levels. It is aimed principally however at academic and industrial researchers and developers in the field of laser technology.
Download or read book Laser Surface Engineering written by Jonathan R. Lawrence and published by Elsevier. This book was released on 2014-10-02 with total page 719 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lasers can alter the surface composition and properties of materials in a highly controllable way, which makes them efficient and cost-effective tools for surface engineering. This book provides an overview of the different techniques, the laser-material interactions and the advantages and disadvantages for different applications. Part one looks at laser heat treatment, part two covers laser additive manufacturing such as laser-enhanced electroplating, and part three discusses laser micromachining, structuring and surface modification. Chemical and biological applications of laser surface engineering are explored in part four, including ways to improve the surface corrosion properties of metals. - Provides an overview of thermal surface treatments using lasers, including the treatment of steels, light metal alloys, polycrystalline silicon and technical ceramics - Addresses the development of new metallic materials, innovations in laser cladding and direct metal deposition, and the fabrication of tuneable micro- and nano-scale surface structures - Chapters also cover laser structuring, surface modification, and the chemical and biological applications of laser surface engineering
Download or read book Energy Research Abstracts written by and published by . This book was released on 1994-05 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt:
