Download or read book The Second Half Century of Rock Mechanics Three Volume Set written by Luis Ribeiro e Sousa and published by CRC Press. This book was released on 2007-08-05 with total page 1356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Forty one years ago, the International Society for Rock Mechanics (ISRM) held its 1st International Congress in Lisbon, Portugal. In July 2007, the 11th ISRM Congress returned to Lisbon, where the Portuguese Geotechnical Society (SPG), the Portuguese National Group of the ISRM, hosted the meeting. The Second Half Century of Rock Mechanics comprises

Download or read book Rock Mechanics for Natural Resources and Infrastructure Development Full Papers written by Sergio A.B. Fontoura and published by CRC Press. This book was released on 2019-09-03 with total page 3791 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock Mechanics for Natural Resources and Infrastructure Development contains the proceedings of the 14th ISRM International Congress (ISRM 2019, Foz do Iguaçu, Brazil, 13-19 September 2019). Starting in 1966 in Lisbon, Portugal, the International Society for Rock Mechanics and Rock Engineering (ISRM) holds its Congress every four years. At this 14th occasion, the Congress brings together researchers, professors, engineers and students around contemporary themes relevant to rock mechanics and rock engineering. Rock Mechanics for Natural Resources and Infrastructure Development contains 7 Keynote Lectures and 449 papers in ten chapters, covering topics ranging from fundamental research in rock mechanics, laboratory and experimental field studies, and petroleum, mining and civil engineering applications. Also included are the prestigious ISRM Award Lectures, the Leopold Muller Award Lecture by professor Peter K. Kaiser. and the Manuel Rocha Award Lecture by Dr. Quinghua Lei. Rock Mechanics for Natural Resources and Infrastructure Development is a must-read for academics, engineers and students involved in rock mechanics and engineering. Proceedings in Earth and geosciences - Volume 6 The ‘Proceedings in Earth and geosciences’ series contains proceedings of peer-reviewed international conferences dealing in earth and geosciences. The main topics covered by the series include: geotechnical engineering, underground construction, mining, rock mechanics, soil mechanics and hydrogeology.

Download or read book The ISRM Suggested Methods for Rock Characterization Testing and Monitoring 2007 2014 written by R. Ulusay and published by Springer. This book was released on 2014-07-25 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of ISRM suggested methods for testing or measuring properties of rocks and rock masses both in the laboratory and in situ, as well as for monitoring the performance of rock engineering structures. The first collection (Yellow Book) has been published in 1981. In order to provide access to all the Suggested Methods in one volume, the ISRM Blue Book was published in 2007 (by the ISRM via the Turkish National Group) and contains the complete set of Suggested Methods from 1974 to 2006 inclusive. The papers in this most recent volume have been published during the last seven years in international journals, mainly in Rock Mechanics and Rock Engineering. They offer guidance for rock characterization procedures and laboratory and field testing and monitoring in rock engineering. These methods provide a definitive procedure for the identification, measurement and evaluation of one or more qualities, characteristics or properties of rocks or rock systems that produces a test result.

Download or read book Rock Mechanics and Engineering Volume 2 written by Xia-Ting Feng and published by CRC Press. This book was released on 2017-07-12 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laboratory and Field Testing is the second volume of the five-volume set Rock Mechanics and Engineering and contains nineteen chapters from key experts in the following fields: - Triaxial or True-triaxial Tests under Condition of Loading and Unloading; - Joint Tests; - Dynamic and Creep Tests; - Physical Modeling Tests; - Field Testing and URLs. The five-volume set “Comprehensive Rock Engineering”, which was published in 1993, has had an important influence on the development of rock mechanics and rock engineering. Significant and extensive advances and achievements in these fields over the last 20 years now justify the publishing of a comparable, new compilation. Rock Mechanics and Engineering represents a highly prestigious, multi-volume work edited by Professor Xia-Ting Feng, with the editorial advice of Professor John A. Hudson. This new compilation offers an extremely wideranging and comprehensive overview of the state-of-the-art in rock mechanics and rock engineering and is composed of peer-reviewed, dedicated contributions by all the key experts worldwide. Key features of this set are that it provides a systematic, global summary of new developments in rock mechanics and rock engineering practices as well as looking ahead to future developments in the fields. Contributors are worldrenowned experts in the fields of rock mechanics and rock engineering, though younger, talented researchers have also been included. The individual volumes cover an extremely wide array of topics grouped under five overarching themes: Principles (Vol. 1), Laboratory and Field Testing (Vol. 2), Analysis, Modelling and Design (Vol. 3), Excavation, Support and Monitoring (Vol. 4) and Surface and Underground Projects (Vol. 5). This multi-volume work sets a new standard for rock mechanics and engineering compendia and will be the go-to resource for all engineering professionals and academics involved in rock mechanics and engineering for years to come.

Download or read book Rock Dynamics and Applications 3 written by Charlie C. Li and published by CRC Press. This book was released on 2018-06-18 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock Dynamics – Experiments, Theories and Applications is a collection of scientific and technical papers presented at the Third International Conference on Rock Dynamics and Applications (RocDyn-3, Trondheim, Norway, 26-27 June 2018). The papers in the book reflect the recent developments in experiment and theory as well as engineering applications of rock dynamics. Rock dynamics studies the response of rock and rock masses under dynamic loading and during the state transition from static loading to kinetic movement. It also includes the study of engineering countermeasures to dynamic instability of rock and rock masses. The topics in the book include: - Dynamic theories - Numerical simulation - Propagation of stress waves - Dynamic tests of rock - Stability of underground openings under dynamic loading - Rockburst - Seismic monitoring - Dynamic rock support - Blasting - Earthquake-related rock structure damage, etc. Applications, such as rockburst, dynamic rock support, seismic monitoring, blasting and earthquake-related rock structure damage, are paid special attention in Rock Dynamics – Experiments, Theories and Applications. The papers, from specialists both from mining and tunnelling branches, discuss commonly interested dynamic issues. Their experience and knowledge in the application of rock dynamics are extremely valuable for all academics, engineers and professionals who work with rock dynamics.

Download or read book Rock Characterisation Modelling and Engineering Design Methods written by Xia-Ting Feng and published by CRC Press. This book was released on 2013-05-17 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock Characterisation, Modelling and Engineering Design Methods contains the contributions presented at the 3rd ISRM SINOROCK Symposium (Shanghai, China, 1820 June 2013). The papers contribute to the further development of the overall rock engineering design process through the sequential linkage of the three themes of rock characterisation, model

Download or read book Rock Mechanics and Engineering Volume 4 written by Xia-Ting Feng and published by CRC Press. This book was released on 2017-05-18 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excavation, Support and Monitoring is the fourth volume of the five-volume set Rock Mechanics and Engineering and contains twenty-three chapters from key experts in the following fields - Excavation Methods; - Support Technology; - Monitoring Technology; - Integrated Engineering Monitoring and Analysis. The five-volume set “Comprehensive Rock Engineering”, which was published in 1993, has had an important influence on the development of rock mechanics and rock engineering. Significant and extensive advances and achievements in these fields over the last 20 years now justify the publishing of a comparable, new compilation. Rock Mechanics and Engineering represents a highly prestigious, multi-volume work edited by Professor Xia-Ting Feng, with the editorial advice of Professor John A. Hudson. This new compilation offers an extremely wide-ranging and comprehensive overview of the state-of-the-art in rock mechanics and rock engineering and is composed of peer-reviewed, dedicated contributions by all the key experts worldwide. Key features of this set are that it provides a systematic, global summary of new developments in rock mechanics and rock engineering practices as well as looking ahead to future developments in the fields. Contributors are world-renowned experts in the fields of rock mechanics and rock engineering, though younger, talented researchers have also been included. The individual volumes cover an extremely wide array of topics grouped under five overarching themes: Principles (Vol. 1), Laboratory and Field Testing (Vol. 2), Analysis, Modelling and Design (Vol. 3), Excavation, Support and Monitoring (Vol. 4) and Surface and Underground Projects (Vol. 5). This multi-volume work sets a new standard for rock mechanics and engineering compendia and will be the go-to resource for all engineering professionals and academics involved in rock mechanics and engineering for years to come.

Download or read book Assessment and Prevention of Failure Phenomena in Rock Engineering written by O. Aydan and published by Routledge. This book was released on 2022-04-26 with total page 1005 pages. Available in PDF, EPUB and Kindle. Book excerpt: First published in 1993. This volume is a collection of papers addressing the issue of the failure of rock engineering structures. This phenomenon occurs in different forms depending on the geometry of structure, material properties of intact rock, structure of rock mass, environmental conditions and initial state of stress.

Download or read book Mine Planning and Equipment Selection 1997 written by R. Farana and published by CRC Press. This book was released on 2020-12-18 with total page 1046 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting current and emerging technologies in the field of mine planning and equipment, this volume also covers control and automation for surface and underground mining. A wide range of papers from professionals in Europe, South America, Africa and Australia are featured.

Download or read book Engineering Properties of Rocks written by Lianyang Zhang and published by Butterworth-Heinemann. This book was released on 2016-09-06 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: More often than not, it is difficult or even impossible to obtain directly the specific rock parameters of interest using in situ methods. The procedures for measuring most rock properties are also time consuming and expensive. Engineering Properties of Rocks, Second Edition, explores the use of typical values and/or empirical correlations of similar rocks to determine the specific parameters needed. The book is based on the author's extensive experience and offers a single source of information for the evaluation of rock properties. It systematically describes the classification and characterization of intact rock, rock discontinuities, and rock masses, and presents the various indirect methods for estimating the deformability, strength, and permeability of these components as well as the in situ rock stresses. - Presents a single source for the correlations on rock properties - Saves time and resources invested on in situ testing procedures - Fully updated with current literature - Expanded coverage of rock types and geographical locations

Download or read book Rock Mechanics and Engineering Volume 3 written by Xia-Ting Feng and published by CRC Press. This book was released on 2017-04-21 with total page 916 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis, Modeling & Design is the third volume of the five-volume set Rock Mechanics and Engineering and contains twenty-eight chapters from key experts in the following fields: - Numerical Modeling Methods; - Back Analysis; - Risk Analysis; - Design and Stability Analysis: Overviews; - Design and Stability Analysis: Coupling Process Analysis; - Design and Stability Analysis: Blast Analysis and Design; - Rock Slope Stability Analysis and Design; - Analysis and Design of Tunnels, Caverns and Stopes. The five-volume set “Comprehensive Rock Engineering”, which was published in 1993, has had an important influence on the development of rock mechanics and rock engineering. Significant and extensive advances and achievements in these fields over the last 20 years now justify the publishing of a comparable, new compilation. Rock Mechanics and Engineering represents a highly prestigious, multi-volume work edited by Professor Xia-Ting Feng, with the editorial advice of Professor John A. Hudson. This new compilation offers an extremely wideranging and comprehensive overview of the state-of-the-art in rock mechanics and rock engineering and is composed of peer-reviewed, dedicated contributions by all the key experts worldwide. Key features of this set are that it provides a systematic, global summary of new developments in rock mechanics and rock engineering practices as well as looking ahead to future developments in the fields. Contributors are worldrenowned experts in the fields of rock mechanics and rock engineering, though younger, talented researchers have also been included. The individual volumes cover an extremely wide array of topics grouped under five overarching themes: Principles (Vol. 1), Laboratory and Field Testing (Vol. 2), Analysis, Modelling and Design (Vol. 3), Excavation, Support and Monitoring (Vol. 4) and Surface and Underground Projects (Vol. 5). This multi-volume work sets a new standard for rock mechanics and engineering compendia and will be the go-to resource for all engineering professionals and academics involved in rock mechanics and engineering for years to come.

Download or read book Rock Mass Stability Around Underground Excavations in a Mine written by Yan Xing and published by CRC Press. This book was released on 2019-11-20 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stability of underground excavations is of great importance to an operating mine because it ensures the safety of the working people and operating equipment, and successful ore production. Due to the complex geological conditions and mine constructions, and variability and uncertainty in estimating rock mass mechanical properties, the assessment of rock mass stability for an underground mine is extremely challenging and difficult. Tackling of this difficult problem is not covered in detail in any of the textbooks currently available in the rock mechanics literature. This monograph aims to cover this gap in the rock mechanics and rock engineering field. This monograph provides detailed procedures for the stability assessment and support design for an underground mine case study. It covers the background of the mine site including the monitored deformation data, the state-of-art methodologies for the stability analysis of rock masses around underground excavations, performed laboratory tests, estimation of the rock mass properties, a brief theory and background of the 3-D Distinct Element Code (3DEC), and numerical modeling of underground rock mass stability including investigation of the effectiveness of rock supports. The monograph is an excellent reference for the senior undergraduates, graduate students, researchers and practitioners who work in the Underground Rock Mechanics and Rock Engineering area in the Mining Engineering, Civil Geotechnical Engineering and DEM (Distinct Element Method) Numerical modeling.

Download or read book Rock Dynamics written by Omer Aydan and published by CRC Press. This book was released on 2017-05-30 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock dynamics has become one of the most important topics in the field of rock mechanics and rock engineering. The spectrum of rock dynamics is very wide and it includes the failure of rocks, rock masses and rock engineering structures such as rockbursting, spalling, popping, collapse, toppling, sliding, blasting, non-destructive testing, geophysical explorations, science and engineering of rocks and impacts. The book specifically covers fundamentals of rock dynamics, constitutive models, numerical analysis techniques, dynamic testing procedures, the multi-parameter responses and motions of rocks during fracturing or slippage in laboratory experiments, earthquakes and their strong motion characteristics and their effect on various rock structures such as foundations, underground structures, slopes, dynamic simulation of loading and excavation, blasting and its positive utilization in rock engineering, the phenomenon of rockburst in rock excavations, non-destructive testing of rockbolts and rock anchors and impacts by meteors or projectiles. The main goal of this book is to present a unified and complete treatise on Rock Dynamics and to represent a milestone in advancing the knowledge in this field and in leading to new techniques for experiments, analytical and numerical modelling as well as monitoring of dynamics of rocks and rock engineering structures.

Download or read book Rock Engineering and Rock Mechanics Structures in and on Rock Masses written by R. Alejano and published by CRC Press. This book was released on 2014-05-12 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock Engineering and Rock Mechanics: Structures in and on Rock Masses covers the most important topics and state-of-the-art in the area of rock mechanics, with an emphasis on structures in and on rock masses. The 255 contributions (including 6 keynote lectures) from the 2014 ISRM European Rock Mechanics Symposium (EUROCK 2014, Vigo, Spain, 27-29 Ma

Download or read book Ground Characterization and Structural Analyses for Tunnel Design written by Benjamín Celada and published by CRC Press. This book was released on 2019-08-06 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical and design-oriented book focuses on ground characterization and structural calculation, as part of the active structural design methodology. With a focus on rock tunnelling it offers a comprehensive rather than a topic-based perspective, deriving sound tunnel design criteria and methods from basic principles. Ground characterization includes excavations, site investigation, and in situ stress determination, culminating in geotechnical classifications. The book then deals with various construction methods and their appropriate calculations, which range from constitutive models for the stress-strain behaviour of an excavation and tunnel support elements to a full stress–strain analysis methodology. The heavily practical approach of the book draws on the authors’ twenty years of tunnelling experience in Spain and South America. It will help any young or established professional who wants to develop a career in the underground field across both civil engineering and geology. As it incorporates the very fundamentals of tunneling design, it can be used as a support for tunneling courses or as a textbook for master’s and PhD courses. Benjamín Celada was Chief Tunnel Engineer at Hunosa and Potasas de Navarra S.A. before founding Geocontrol S.A. He has also worked for twenty years as Professor of Underground Works at the Polytechnic Mining University in Madrid, Spain. Z. T. Bieniawski directed the Rock Mechanics Department of the Council for Scientific and Industrial Research in Pretoria, then taught at the Pennsylvania State University for twenty years.

Download or read book Geomechanics and Geodynamics of Rock Masses Volume 2 written by Vladimir Litvinenko and published by CRC Press. This book was released on 2018-05-20 with total page 764 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is Volume 2 of the EUROCK 2018 proceedings. Geomechanics and Geodynamics of Rock Masses contains contributions presented at EUROCK 2018, the 2018 International Symposium of the International Society for Rock Mechanics (ISRM 2018, Saint Petersburg, Russia, 22-26 May 2018). Dedicated to recent advances and achievements in the fields of geomechanics and geotechnology, the main topics of the book include: - Physical and mechanical properties of fractured rock (laboratory testing and rock properties, field measurements and site investigations) - Geophysics in rock mechanics - Rock mass strength and failure - Nonlinear problems in rock mechanics - Effect of joint water on the behavior of rock foundation - Numerical modeling and back analysis - Mineral resources development: methods and rock mechanics problems - Rock mechanics and underground construction in mining, hydropower industry and civil engineering - Rock mechanics in petroleum engineering - Geodynamics and monitoring of rock mass behavior - Risks and hazards - Geomechanics of technogenic deposits Geomechanics and Geodynamics of Rock Masses will be of interest to researchers and professionals involved in the various branches of rock mechanics and rock engineering. EUROCK 2018, organized by the Saint Petersburg Mining University, is a continuation of the successful series of ISRM symposia in Europe, which began in 1992 in Chester, UK.

Download or read book Rock Engineering Risk written by John A. Hudson and published by CRC Press. This book was released on 2015-05-05 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a new, necessary and valuable approach to the consideration of risk in underground engineering projects constructed within rock masses. There are Chapters on uncertainty and risk, rock engineering systems, rock fractures and rock stress, the design of a repository for radioactive waste, plus two major case examples relating to th