Download or read book International Conference on Calibration Methods and Automotive Data Analytics written by Karsten Röpke and published by expert verlag. This book was released on 2019-05-20 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discussions on electrification, air pollution control and driving bans in inner cities bring major challenges for powertrain development. Real Driving Emissions (RDE), Worldwide Harmonized Light-Duty Test Procedures (WLTP) and the next level of CO2 reduction enforce new development methods. At the same time, new measurement technology and better IT infrastructure mean that ever larger amounts of data are available. Thereby, methods of digitization, e.g. Machine Learning, may be used in automotive development. Another challenge arises from the ever-increasing number of vehicle variants. Many OEMs reduce the number of their engines to reduce costs. However, the basic engines are then installed with little hardware customization in numerous vehicle models. As a result, the application of derivatives and the systematic validation of an application play an important role.

Download or read book International Conference on Calibration Methods and Automotive Data Analytics written by Karsten Röpke and published by . This book was released on 2019-05-20 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Automotive Data Analytics Methods DoE written by Karsten Röpke and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Automotive Data Analytics Methods and Design of Experiments DoE written by Clemens Gühmann and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book ICWIM 5 Proceedings of the International Conference on Heavy Vehicles written by Bernard Jacob and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: Weigh-in-motion (WIM) is a process of measuring the dynamic tire forces of a moving vehicle and estimating the corresponding tire loads of the static vehicle. This collection of lectures from the International Conference on Weigh-in-Motion details applications such as: collection of statistical traffic data, support of commercial vehicle enforcement, roadway and bridge cost allocation, and traffic management.

Download or read book Proceedings of the 4th International Conference on Big Data Analytics for Cyber Physical System in Smart City Volume 1 written by Mohammed Atiquzzaman and published by Springer Nature. This book was released on 2023-07-04 with total page 823 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers a selection of peer-reviewed papers presented at the 4th Big Data Analytics for Cyber-Physical System in Smart City (BDCPS 2022) conference, held in Bangkok, Thailand, on December 16–17. The contributions, prepared by an international team of scientists and engineers, cover the latest advances and challenges made in the field of big data analytics methods and approaches for the data-driven co-design of communication, computing, and control for smart cities. Given its scope, it offers a valuable resource for all researchers and professionals interested in big data, smart cities, and cyber-physical systems.

Download or read book International Conference on Statistics and Analytical Methods in Automotive Engineering written by IMechE (Institution of Mechanical Engineers) and published by John Wiley & Sons. This book was released on 2002-11-22 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: These IMechE conference transactions examine how major improvements have been made in product delivery processes by the effective use of both statistical and analytical methods, as well as examining the problems that can occur as a result of under utilization of information. This volume will be of great interest to managers, engineers, and statisticians at all levels, engaged in project management or the design and development of motor vehicles, their subsystems, and components. CONTENTS INCLUDE Applications of advanced modelling methods in engine development Application of adaptive online DoE techniques for engine ECU calibration Radial basis functions for engine modelling Designing for Six Sigma reliability Dimensional variation analysis for automotive hybrid aluminium body structures Reliability-based multidisciplinary design optimization of vehicle structures

Download or read book Internal Combustion Engines and Powertrain Systems for Future Transport 2019 written by IMECHE and published by CRC Press. This book was released on 2020-03-09 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the changing landscape of the transport sector, there are also alternative powertrain systems on offer that can run independently of or in conjunction with the internal combustion (IC) engine. This shift has actually helped the industry gain traction with the IC Engine market projected to grow at 4.67% CAGR during the forecast period 2019-2025. It continues to meet both requirements and challenges through continual technology advancement and innovation from the latest research. With this in mind, the contributions in Internal Combustion Engines and Powertrain Systems for Future Transport 2019 not only cover the particular issues for the IC engine market but also reflect the impact of alternative powertrains on the propulsion industry. The main topics include: • Engines for hybrid powertrains and electrification • IC engines • Fuel cells • E-machines • Air-path and other technologies achieving performance and fuel economy benefits • Advances and improvements in combustion and ignition systems • Emissions regulation and their control by engine and after-treatment • Developments in real-world driving cycles • Advanced boosting systems • Connected powertrains (AI) • Electrification opportunities • Energy conversion and recovery systems • Modified or novel engine cycles • IC engines for heavy duty and off highway Internal Combustion Engines and Powertrain Systems for Future Transport 2019 provides a forum for IC engine, fuels and powertrain experts, and looks closely at developments in powertrain technology required to meet the demands of the low carbon economy and global competition in all sectors of the transportation, off-highway and stationary power industries.

Download or read book Optimization of adaptive test design methods for the determination of steady state data driven models in terms of combustion engine calibration written by Sandmeier, Nino and published by Universitätsverlag der TU Berlin. This book was released on 2022-12-01 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis deals with the development of a model-based adaptive test design strategy with a focus on steady-state combustion engine calibration. The first research topic investigates the question how to handle limits in the input domain during an adaptive test design procedure. The second area of scope aims at identifying the test design method providing the best model quality improvement in terms of overall model prediction error. To consider restricted areas in the input domain, a convex hull-based solution involving a convex cone algorithm is developed, the outcome of which serves as a boundary model for a test point search. A solution is derived to enable the application of the boundary model to high-dimensional problems without calculating the exact convex hull and cones. Furthermore, different data-driven engine modeling methods are compared, resulting in the Gaussian process model as the most suitable one for a model-based calibration. To determine an appropriate test design method for a Gaussian process model application, two new strategies are developed and compared to state-of-the-art methods. A simulation-based study shows the most benefit applying a modified mutual information test design, followed by a newly developed relevance-based test design with less computational effort. The boundary model and the relevance-based test design are integrated into a multicriterial test design strategy that is tailored to match the requirements of combustion engine test bench measurements. A simulation-based study with seven and nine input parameters and four outputs each offered an average model quality improvement of 36 % and an average measured input area volume increase of 65 % compared to a non-adaptive space-filling test design. The multicriterial test design was applied to a test bench measurement with seven inputs for verification. Compared to a space-filling test design measurement, the improvement could be confirmed with an average model quality increase of 17 % over eight outputs and a 34 % larger measured input area. Diese Arbeit befasst sich mit der Entwicklung einer modellbasierten adaptiven Versuchsplanungsstrategie für die Anwendung in der Applikation des Stationärverhaltens von Verbrennungsmotoren. Der erste Forschungsteil untersucht, wie sich Grenzen im Eingangsraum in die Versuchsplanung eines adaptiven Prozesses einbinden lassen. Ein weiterer Fokus liegt auf der Identifikation einer modellbasierten Versuchsplanung, die eine bestmögliche Verbesserung der globalen Modellqualität hinsichtlich des Prädiktionsfehlers ermöglicht. Es wird ein Grenzraummodell auf Basis der konvexen Hülle unter Zuhilfenahme eines Algorithmus zur Bestimmung eines konvexen Konus entwickelt, das als Grundlage für eine Versuchsplanung in beschränkten Eingangsräumen verwendet wird. Um die Anwendbarkeit bei hochdimensionalen Problemstellungen zu gewährleisten, wird ein Verfahren vorgestellt, das eine Berechnung auch ohne die Bestimmung der exakten konvexen Hülle und konvexen Konen ermöglicht. Des Weiteren werden verschiedene Methoden zur datengetriebenen Modellbildung des Verbrennungsmotors verglichen, wobei das Gauß-Prozess Modell als die geeignetste Modellierungsmethode hervorgeht. Um die bestmögliche Versuchsplanungsmethode bei der Anwendung des Gauß-Prozess Modells zu ermitteln, werden zwei neue Strategien entwickelt und mit verfügbaren Methoden aus der Literatur verglichen. Eine simulationsbasierte Studie zeigt, dass eine angepasste Mutual Information Methode die besten Ergebnisse liefert. Ein neu entwickeltes relevanzbasiertes Verfahren erreicht die zweitbesten Ergebnisse, bietet aber einen geringeren Berechnungsaufwand als das Mutual Information Verfahren. Das Grenzmodell und das relevanzbasierte Verfahren werden in einem multikriteriellen Versuchsplanungsverfahren zusammengeführt, das an die Anforderungen von Messungen an einem Verbrennungsmotorenprüfstand angepasst ist. In einer simulationsbasierten Studie mit sieben bzw. neun Eingangsparametern und jeweils vier Ausgängen konnte eine durchschnittliche Modellqualitätsverbesserung von 36 % und eine mittlere Vergrößerung des vermessenen Eingangsraumvolumens von 65 % im Vergleich zu einer nichtadaptiven raumfüllenden Versuchsplanung gezeigt werden. Das multikriterielle Versuchsplanungsverfahren wurde anhand von Prüfstandsmessungen mit sieben Eingangsparametern verifiziert. Im Vergleich zu einer raumfüllenden Versuchsplanung konnte eine mittlere Modellqualitätsverbesserung über alle acht Ausgänge von 17 % und ein um 34 % vergrößertes vermessenes Eingangsraumvolumen erreicht werden, wodurch die Ergebnisse der Simulationen bestätigt werden konnten.

Download or read book International Conference on Applications and Techniques in Cyber Security and Intelligence written by Jemal Abawajy and published by Springer. This book was released on 2017-10-20 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the outcomes of the 2017 International Conference on Applications and Techniques in Cyber Security and Intelligence, which focused on all aspects of techniques and applications in cyber and electronic security and intelligence research. The conference provides a forum for presenting and discussing innovative ideas, cutting-edge research findings, and novel techniques, methods and applications on all aspects of cyber and electronic security and intelligence.

Download or read book Proceedings of the 2011 International Conference on Informatics Cybernetics and Computer Engineering ICCE2011 November 19 20 2011 Melbourne Australia written by Liangzhong Jiang and published by Springer Science & Business Media. This book was released on 2011-11-24 with total page 689 pages. Available in PDF, EPUB and Kindle. Book excerpt: The volume includes a set of selected papers extended and revised from the International Conference on Informatics, Cybernetics, and Computer Engineering. Intelligent control is a class of control techniques, that use various AI computing approaches like neural networks, Bayesian probability, fuzzy logic, machine learning, evolutionary computation and genetic algorithms. Intelligent control can be divided into the following major sub-domains: Neural network control Bayesian control Fuzzy (logic) control Neuro-fuzzy control Expert Systems Genetic control Intelligent agents (Cognitive/Conscious control) New control techniques are created continuously as new models of intelligent behavior are created and computational methods developed to support them. Networks may be classified according to a wide variety of characteristics such as medium used to transport the data, communications protocol used, scale, topology, organizational scope, etc. ICCE 2011 Volume 1 is to provide a forum for researchers, educators, engineers, and government officials involved in the general areas of Intelligent Control and Network Communication to disseminate their latest research results and exchange views on the future research directions of these fields. 90 high-quality papers are included in the volume. Each paper has been peer-reviewed by at least 2 program committee members and selected by the volume editor Special thanks to editors, staff of association and every participants of the conference. It’s you make the conference a success. We look forward to meeting you next year.

Download or read book Big Data Analytics for Cyber Physical Systems written by Shiyan Hu and published by Springer Nature. This book was released on 2020-06-25 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights research and survey articles dedicated to big data techniques for cyber-physical system (CPS), which addresses the close interactions and feedback controls between cyber components and physical components. The book first discusses some fundamental big data problems and solutions in large scale distributed CPSs. The book then addresses the design and control challenges in multiple CPS domains such as vehicular system, smart city, smart building, and digital microfluidic biochips. This book also presents the recent advances and trends in the maritime simulation system and the flood defence system.

Download or read book Nonlinear System Identification written by Oliver Nelles and published by Springer Nature. This book was released on 2020-09-09 with total page 1235 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides engineers and scientists in academia and industry with a thorough understanding of the underlying principles of nonlinear system identification. It equips them to apply the models and methods discussed to real problems with confidence, while also making them aware of potential difficulties that may arise in practice. Moreover, the book is self-contained, requiring only a basic grasp of matrix algebra, signals and systems, and statistics. Accordingly, it can also serve as an introduction to linear system identification, and provides a practical overview of the major optimization methods used in engineering. The focus is on gaining an intuitive understanding of the subject and the practical application of the techniques discussed. The book is not written in a theorem/proof style; instead, the mathematics is kept to a minimum, and the ideas covered are illustrated with numerous figures, examples, and real-world applications. In the past, nonlinear system identification was a field characterized by a variety of ad-hoc approaches, each applicable only to a very limited class of systems. With the advent of neural networks, fuzzy models, Gaussian process models, and modern structure optimization techniques, a much broader class of systems can now be handled. Although one major aspect of nonlinear systems is that virtually every one is unique, tools have since been developed that allow each approach to be applied to a wide variety of systems.

Download or read book 8th International Conference on Practical Applications of Computational Biology Bioinformatics PACBB 2014 written by Julio Saez-Rodriguez and published by Springer. This book was released on 2014-05-21 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biological and biomedical research are increasingly driven by experimental techniques that challenge our ability to analyse, process and extract meaningful knowledge from the underlying data. The impressive capabilities of next generation sequencing technologies, together with novel and ever evolving distinct types of omics data technologies, have put an increasingly complex set of challenges for the growing fields of Bioinformatics and Computational Biology. The analysis of the datasets produced and their integration call for new algorithms and approaches from fields such as Databases, Statistics, Data Mining, Machine Learning, Optimization, Computer Science and Artificial Intelligence. Clearly, Biology is more and more a science of information requiring tools from the computational sciences. In the last few years, we have seen the surge of a new generation of interdisciplinary scientists that have a strong background in the biological and computational sciences. In this context, the interaction of researchers from different scientific fields is, more than ever, of foremost importance boosting the research efforts in the field and contributing to the education of a new generation of Bioinformatics scientists. PACBB‘14 contributes to this effort promoting this fruitful interaction. PACBB'14 technical program included 34 papers spanning many different sub-fields in Bioinformatics and Computational Biology. Therefore, the conference promotes the interaction of scientists from diverse research groups and with a distinct background such as computer scientists, mathematicians or biologists.

Download or read book Proceedings of the 6th International Conference on Electrical Engineering and Information Technologies for Rail Transportation EITRT 2023 written by Jianwei Yang and published by Springer Nature. This book was released on 2024-01-08 with total page 709 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reflects the latest research trends, methods, and experimental results in the field of electrical and information technologies for rail transportation, which covers abundant state-of-the-art research theories and ideas. As a vital field of research that is highly relevant to current developments in a number of technological domains, the subjects it covered include intelligent computing, information processing, communication technology, automatic control, etc. The objective of the proceedings is to provide a major interdisciplinary forum for researchers, engineers, academicians, and industrial professionals to present the most innovative research and development in the field of rail transportation electrical and information technologies. Engineers and researchers in academia, industry, and government will also explore an insightful view of the solutions that combine ideas from multiple disciplines in this field. The volumes serve as an excellent reference work for researchers and graduate students working on rail transportation and electrical and information technologies.

Download or read book Energy And Mechanical Engineering Proceedings Of 2015 International Conference written by Steven Y Liang and published by World Scientific. This book was released on 2016-03-03 with total page 1329 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Conference on Energy and Mechanical Engineering brought together scientists and engineers from energy and engineering sectors to share and compare notes on the latest development in energy science, automation, control and mechanical engineering. This proceedings compiled and selected 156 articles organized into Energy Science and Technology; Mechanical Engineering; Automation and Control Engineering. Amongst them, are the results and development of Government sponsored research projects undertaken both in universities, research institutes, and across industry, reflecting the state-of-art technological know-how of Chinese scientists.

Download or read book Cognitive Social Mining Applications in Data Analytics and Forensics written by Haldorai, Anandakumar and published by IGI Global. This book was released on 2018-12-14 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recently, there has been a rapid increase in interest regarding social network analysis in the data mining community. Cognitive radios are expected to play a major role in meeting this exploding traffic demand on social networks due to their ability to sense the environment, analyze outdoor parameters, and then make decisions for dynamic time, frequency, space, resource allocation, and management to improve the utilization of mining the social data. Cognitive Social Mining Applications in Data Analytics and Forensics is an essential reference source that reviews cognitive radio concepts and examines their applications to social mining using a machine learning approach so that an adaptive and intelligent mining is achieved. Featuring research on topics such as data mining, real-time ubiquitous social mining services, and cognitive computing, this book is ideally designed for social network analysts, researchers, academicians, and industry professionals.