Download or read book Forms of International Production and Home industry Characteristics written by Thomas G. Parry and published by . This book was released on 1975 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Manufacturing and Investment Around the World written by Industrial Systems Research and published by . This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing and Investment around the World: An International Survey of Modernization and Development This book is a comprehensive cross national examination of modernization and development in manufacturing. The focus is on the nature and sources of the important variations that occur internationally in growth, competitiveness, and attractiveness to foreign direct investors. The study begins with an overview of existing published research on general manufacturing development before turning to particular key aspects. It compares production and investment in a range of Western and non-Western countries. It also presents case studies of growth and performance in major industries and sectors. Contents: 1. Manufacturing and Investment Around the World: Introduction and Overview 2. Manufacturing Growth and Performance: a Review of Research Findings 3. Manufacturing in Western Countries: International Comparisons 4. Manufacturing in Non-Western Countries: International Comparisons 5. International Trade, Markets, and Demand Trends 6. Finance and Investment in Manufacturing 7. Industrial Manufacturing Facilities and Services
Download or read book Information Technology for Manufacturing written by National Research Council and published by National Academies Press. This book was released on 1995-02-27 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes a vision of manufacturing in the twenty-first century that maximizes efficiencies and improvements by exploiting the full power of information and provides a research agenda for information technology and manufacturing that is necessary for success in achieving such a vision. Research on information technology to support product and process design, shop-floor operations, and flexible manufacturing is described. Roles for virtual manufacturing and the information infrastructure are also addressed. A final chapter is devoted to nontechnical research issues.
Download or read book International Manufacturing Strategy in a Time of Great Flux written by Louis Brennan and published by Springer. This book was released on 2016-09-02 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book assesses the state of international manufacturing strategy and clarifies how recent developments, for example regarding configuration, technology, and the environment, are impacting on its content and direction and on its relationship to manufacturing performance. In providing up-to-date coverage of the consequences of such forces and factors for international manufacturing, this book aims to expand the debate concerning international manufacturing strategy and cast light on its current evolution. International manufacturing is operating within a time of great flux. While offshoring of activities has dominated over recent decades, nearshoring and reshoring are increasingly being considered and observed in practice. At the same time, technologies such as 3D-printing are gaining traction and the role of ICT and data analytics is increasingly important in the international manufacturing landscape while digitization becomes more prevalent and the embrace of the Internet of Things (IOT) accelerates. Furthermore, issues related to the environment are figuring more prominently in international manufacturing considerations, and assumptions regarding the long-term cost of energy are being called into question. International manufacturing is also experiencing greater servitization.
Download or read book Global Manufacturing Management written by Thomas Friedli and published by Springer Nature. This book was released on 2021-09-28 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: Using site-specific optimization approaches in international manufacturing networks is increasingly proving insufficient. To solve this problem, several holistic and integrated alternatives have been developed to reflect a global perspective. This book presents advances in the St. Gallen Global Manufacturing Network Model and its application in numerous industry-, benchmarking- and research projects. The contents combine data-driven solutions with qualitative management frameworks for the strategic optimization of international manufacturing networks. In the first part, the book addresses the foundation of manufacturing network management and further describes the St. Gallen Operational Excellence approaches to manage plant performance. On this basis, the authors show how plant- and network-level performance can be enhanced via key improvement domains (e.g., strategy, configuration, coordination, performance management, digitalization). In turn, the second part demonstrates the application of the constructs in manufacturing companies from various industries. By combining research and practice, the book offers unique perspectives on the management of global production striving toward higher performance on manufacturing site and network level.
Download or read book Comparison of the Characteristic Aspects of Production in Europe and the United States of America written by International Chamber of Commerce and published by . This book was released on 1931 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Smaller Manufacturing Enterprises in an International Context written by George Tesar and published by World Scientific. This book was released on 2010 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of approaches to internationalization as experienced by smaller manufacturing enterprises over a relatively long period of time ? the 35-year period from 1974 to 2009. The original research on which this study is based dates back to the mid-1970s, when academic interest in export studies, market entry modes, and internationalization approaches, among others, have their origins. With practical examples of companies from both inside and outside the USA, readers will be able to understand how smaller manufacturing enterprises approach the world of international commerce, how they prepare themselves for it, and what really draws them into the world of international commerce.
Download or read book Advances in Ergonomics of Manufacturing Managing the Enterprise of the Future written by Christopher Schlick and published by Springer. This book was released on 2016-07-26 with total page 609 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the latest advances in people-centered design, operation, and management of broadly defined advanced manufacturing systems and processes. It reports on human factors issues related to various research areas such as intelligent manufacturing technologies, web-based manufacturing services, digital manufacturing worlds, and manufacturing knowledge support systems, as well as other contemporary manufacturing environments. The book covers an extensive range of applications of human factors in the manufacturing industry: from work design, supply chains, evaluation of work systems, and social and organization design, to manufacturing systems, simulation and visualization, automation in manufacturing, and many others. Special emphasis is given to computer aided manufacturing technologies supporting enterprises, both in general and in the manufacturing industry in particular, such as knowledge-based systems, virtual reality, artificial intelligence methods, and many more. Based on the AHFE 2016 International Conference on Human Aspects of Advanced Manufacturing, held on July 27-31, 2016, in Walt Disney World®, Florida, USA, the book provides readers with a timely snapshot of the enterprises of the future and a set of cutting-edge technologies and methods for building innovative, human-centered, and computer-integrated manufacturing systems.
Download or read book Integrating Human Aspects in Production Management written by Gert Zülch and published by Springer Science & Business Media. This book was released on 2004-11-09 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years the situation of production enterprises has been aggravated by the change from a vendors' market to a buyers' market, the globaHsation of competition, a severe market segmentation and rapid progress in product and process technologies. Beside cost and quality, time has taken on an increasingly important role, forcing enterprises to become ever more dynamic and versatile. Therefore, in all areas of production management, novel, effective concepts, procedures and tools have been developed in order to meet these new requirements. But beyond these more technical, organisational and information technology related aspects there is certainly another one which has to be considered more closely than ever before, namely that of human resources. Is not group technology also related to group work? Do partners in a global network only operate according to predefined process schemes with no personal contact? Are the mental process models of the programmers of ERP-systems the same as those of the users? What is the impact of human behaviour and what consequences are to be expected if organisational and individual objectives are separated? And finally, how do necessary technological changes affect the workforce and the individual needs and wishes of the employees.
Download or read book How Nations Succeed Manufacturing Trade Industrial Policy and Economic Development written by Murat A. Yülek and published by Springer. This book was released on 2018-08-02 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book assesses developmental experience in different countries as well as British expansion following the industrial revolution from a developmental perspective. It explains why some nations are rich and others are poor, and discusses how manufacturing made economies flourish and spur economic development. It explains how today’s governments can design and implement industrial policy, and how they can determine economically strategic sectors to break out of Low and Middle Income Traps. Closely linked to global trade and (im)balances, industrialization was never an accident. Industrialization explains how some countries experience export-led growth and others import-led slowdowns. Many confuse industrialization with the construction of factory buildings rather than a capacity and skill building process through certain stages. Industrial policy helps countries advance through those stages. Explaining technical concepts in understandable terms, the book discusses the capacity and limits of the developmental state in industrialization and in general in economic development, demonstrating how picking-the-winner type focused industrial policy has worked in different countries. It also discusses how industrial policy and science, technology and innovation policies should be sequenced for best results.
Download or read book Advances in Production Management Systems Towards Smart and Digital Manufacturing written by Bojan Lalic and published by Springer Nature. This book was released on 2020-08-25 with total page 783 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two-volume set IFIP AICT 591 and 592 constitutes the refereed proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2020, held in Novi Sad, Serbia, in August/September 2020. The 164 papers presented were carefully reviewed and selected from 199 submissions. They discuss globally pressing issues in smart manufacturing, operations management, supply chain management, and Industry 4.0. The papers are organized in the following topical sections: Part I: advanced modelling, simulation and data analytics in production and supply networks; advanced, digital and smart manufacturing; digital and virtual quality management systems; cloud-manufacturing; cyber-physical production systems and digital twins; IIOT interoperability; supply chain planning and optimization; digital and smart supply chain management; intelligent logistics networks management; artificial intelligence and blockchain technologies in logistics and DSN; novel production planning and control approaches; machine learning and artificial intelligence; connected, smart factories of the future; manufacturing systems engineering: agile, flexible, reconfigurable; digital assistance systems: augmented reality and virtual reality; circular products design and engineering; circular, green, sustainable manufacturing; environmental and social lifecycle assessments; socio-cultural aspects in production systems; data-driven manufacturing and services operations management; product-service systems in DSN; and collaborative design and engineering Part II: the Operator 4.0: new physical and cognitive evolutionary paths; digital transformation approaches in production management; digital transformation for more sustainable supply chains; data-driven applications in smart manufacturing and logistics systems; data-driven services: characteristics, trends and applications; the future of lean thinking and practice; digital lean manufacturing and its emerging practices; new reconfigurable, flexible or agile production systems in the era of industry 4.0; operations management in engineer-to-order manufacturing; production management in food supply chains; gastronomic service system design; product and asset life cycle management in the circular economy; and production ramp-up strategies for product
Download or read book Unit Manufacturing Processes written by National Research Council and published by National Academies Press. This book was released on 1995-01-03 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing, reduced to its simplest form, involves the sequencing of product forms through a number of different processes. Each individual step, known as an unit manufacturing process, can be viewed as the fundamental building block of a nation's manufacturing capability. A committee of the National Research Council has prepared a report to help define national priorities for research in unit processes. It contains an organizing framework for unit process families, criteria for determining the criticality of a process or manufacturing technology, examples of research opportunities, and a prioritized list of enabling technologies that can lead to the manufacture of products of superior quality at competitive costs. The study was performed under the sponsorship of the National Science Foundation and the Defense Department's Manufacturing Technology Program.
Download or read book Human Aspects of Advanced Manufacturing written by Waldemar Karwowski and Stefan Trzcielinski and published by AHFE International. This book was released on 2022-07-24 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt: Human Aspects of Advanced Manufacturing Proceedings of the 13th International Conference on Applied Human Factors and Ergonomics (AHFE 2022), July 24–28, 2022, New York, USA
Download or read book Additive Manufacturing written by Manu Srivastava and published by CRC Press. This book was released on 2019-09-16 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a growing need for manufacturing optimization all over the world. The immense market of Additive Manufacturing (AM) technologies dictates a need for a book that will provide knowledge of the various aspects of AM for anyone interested in learning about this fast-growing topic. This book disseminates knowledge of AM amongst scholars at graduate level, post graduate level, doctoral level, as well as industry personnel. The objective is to offer a state-of-the-art book which covers all aspects of AM and incorporates all information regarding trends, historical developments, classifications, materials, tooling, software issues, dynamic design, principles, limitations, and communication interfaces in a one-stop resource. Features: Breaks down systematic coverage of various aspects of AM within four distinct sections Contains details of various AM techniques based on ASTM guidelines Discusses many AM applications with suitable illustrations Includes recent trends in the field of AM Covers engineering materials utilized as raw materials in AM Compares AM techniques with different traditional manufacturing methods
Download or read book International Journal of Manufacturing Materials and Mechanical Engineering Issue 1 written by J. Paulo Davim and published by IGI Publishing. This book was released on 2011 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Journal of Manufacturing, Materials, and Mechanical Engineering (IJMMME) is a refereed, interdisciplinary journal that publishes high quality articles with special emphasis on research and development in manufacturing, materials and mechanical engineering. IJMMME provides discussion and the exchange of information on all important aspects of classical and modern mechanical engineering. In addition, IJMMME covers all sustainable development aspects related with manufacturing, materials, and mechanical engineering.
Download or read book Advances in Manufacturing III written by Justyna Trojanowska and published by Springer Nature. This book was released on 2022-03-25 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on cutting-edge research and technology aimed at increasing the efficiency of production processes and to foster the implementation of Industry 4.0 solutions in manufacturing. Gathering peer-review contributions to the 7th International Scientific Technical Conference MANUFACTURING 2022, held in Poznan, Poland on May 16-19, 2022, it describes advanced engineering methods to optimize different stages and aspects of the production process, including product design, production scheduling, equipment maintenance and safety. It discusses the applications of augmented/virtual and mixed reality within the manufacturing industry and for education and training purposes, and highlights cutting-edge solutions for green and sustainable production. Offering a timely, practice-oriented reference guide for both researchers and practitioners in manufacturing, this book is also intended to contribute bridging the gap between university and industry, fostering a closer communication and cooperation between them.
Download or read book Agricultural Problems in Their International Aspect written by International Institute of Agriculture and published by Rome : International Institute of Agriculture. This book was released on 1926 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt:
