Download or read book Internal Glazing written by NHS Estates and published by The Stationery Office. This book was released on 2005 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supersedes 1st edition (1995, ISBN 0113217609)
Download or read book Internal Components written by Alan Blanc and published by Routledge. This book was released on 2014-10-29 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book and its companion volume External Components encourage an evaluation of alternative methods for putting components together. Both use contemporary case studies to relate component design to real building.
Download or read book Materials written by Alan Everett and published by Routledge. This book was released on 2014-05-12 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: A well-known and respected standard reference, this fifth edition provides a thorough treatment of the properties of building materials and their manufacture, both on-site and in the factory.
Download or read book Manual J Residential Load Calculation written by Hank Rutkowski and published by ACCA. This book was released on 2011-11-01 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manual J 8th Edition is the national ANSI-recognized standard for producing HVAC equipment sizing loads for single-family detached homes, small multi-unit structures, condominiums, town houses, and manufactured homes. This new version incorporates the complete Abridged Edition of Manual J. The manual provides quick supplemental details as well as supporting reference tables and appendices. A proper load calculation, performed in accordance with the Manual J 8th Edition procedure, is required by national building codes and most state and local jurisdictions.
Download or read book Building Energy Simulation written by Vishal Garg and published by CRC Press. This book was released on 2020-08-17 with total page 741 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Building Energy Simulation includes studies of various components and systems of buildings and their effect on energy consumption, with the help of DesignBuilderTM, a front-end for the EnergyPlus simulation engine, supported by examples and exercises. The book employs a "learning by doing" methodology. It explains simulation-input parameters and how-to-do analysis of the simulation output, in the process explaining building physics and energy simulation. Divided into three sections, it covers the fundamentals of energy simulation followed by advanced topics in energy simulation and simulation for compliance with building codes and detailed case studies for comprehensive building energy simulation. Features: Focuses on learning building energy simulation while being interactive through examples and exercises. Explains the building physics and the science behind the energy performance of buildings. Encourages an integrated design approach by explaining the interactions between various building systems and their effect on energy performance of building. Discusses a how-to model for building energy code compliance including three projects to practice whole building simulation. Provides hands-on training of building energy simulation tools: DesignBuilderTM and EnergyPlus. Includes practical projects problems, appendices and CAD files in the e-resources section. Building Energy Simulation is intended for students and researchers in building energy courses, energy simulation professionals, and architects.
Download or read book written by and published by . This book was released on 2005 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes "special issues" and "extra issues."
Download or read book Building Systems for Interior Designers written by Corky Binggeli and published by John Wiley & Sons. This book was released on 2003-01-21 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first desk reference on technical building systems for interior designers Building Systems for Interior Designers is the first book to explain technical building systems and engineering issues in a clear and accessible way to interior designers. The technical knowledge and vocabulary presented here allow interior designers to communicate more effectively with architects, engineers, and contractors while collaborating on projects, leading to more accurate solutions for problems related to a broad range of other building considerations with an impact on interior design. Information on sustainable design is integrated throughout the book, making it a relevant tool for current and emerging trends in building design. Written in a straightforward, nontechnical style that maintains depth and accuracy, this book is the first complete text applicable to interior design courses and provides thorough preparation for the NCIDQ exam. Engaging, clear illustrations support the text, which is accessible to those without a math or physics background. Topics covered include: Heating and air conditioning systems Environmental issues Water and waste Thermal comfort HVAC systems Electricity Lighting Security and communications systems Fire safety Transportation systems With numerous case examples illustrating how interior designers apply this material in the real world, Building Systems for Interior Designers is a valuable book for students, as well as a practical desktop reference for professionals. Content from this book is available as an online continuing professional education course at http://www.wiley.com/WileyCDA/Section/id-320255.html#fire_safety. WileyCPE courses are available on demand, 24 hours a day, and are approved by the American Institute of Architects.
Download or read book Research in Building Physics and Building Engineering written by Paul Fazio and published by CRC Press. This book was released on 2020-11-26 with total page 1017 pages. Available in PDF, EPUB and Kindle. Book excerpt: Buildings influence people. They account for one third of energy consumption across the globe and represent an annual capital expenditure of 7%-10% of GNP in industrialized countries. Their lifetime operation costs can exceed capital investment. Building Engineering aims to make buildings more efficient, safe and economical. One branch of this discipline, Building Physics/Science, has gained prominence, with a heightened awareness of such phenomena as sick buildings, the energy crisis and sustainability, and considering the performance of buildings in terms of climatic loads and indoor conditions. The book reflects the advanced level and high quality of research which Building Engineering, and Building Physics/Science in particular, have reached at the beginning of the twenty-first century. It will be a valuable resource to: engineers, architects, building scientists, consultants on the building envelope, researchers and graduate students.
Download or read book Architecture in the Digital Age written by Branko Kolarevic and published by Taylor & Francis. This book was released on 2004-03 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt: Architecture in the Digital Age addresses contemporary architectural practice in which digital technologies are radically changing how buildings are conceived, designed and produced. It discusses the digitally-driven changes, their origins, and their effects by grounding them in actual practices already taking place, while simultaneously speculating about their wider implications for the future. The book offers a diverse set of ideas as to what is relevant today and what will be relevant tomorrow for emerging architectural practices of the digital age.
Download or read book Barry s Introduction to Construction of Buildings written by Stephen Emmitt and published by John Wiley & Sons. This book was released on 2018-09-10 with total page 764 pages. Available in PDF, EPUB and Kindle. Book excerpt: An authoritative, well-established, comprehensive, practical, and highly illustrated guide to construction practice Based mainly on domestic and residential buildings—and filled with extensive illustrations throughout—this concise text is the ideal introduction to the subject of building construction. It provides the basic material that readers need in order to understand the construction process for the majority of low rise buildings. The book explains construction technology through the key functional and performance requirements for the main elements common to all buildings. With a strong focus on building efficiency and meeting the challenges posed by limiting the environmental impact of buildings, and new “at a glance” summaries allowing you to grasp the salient points of each chapter, readers will find the text fully up to date with the latest building regulations and construction technology. Barry’s Introduction to Construction of Buildings, Fourth Edition starts by taking an in-depth look at the construction process and general principles of construction. It then offers comprehensive chapter coverage of site analysis, set-up, drainage and scaffolding; ground stability and foundations; floors, walls, doors, windows, roofs, stairs, and ramps; surface finishes; internal environment and energy supply; and water supply and sanitation. Deals with design, technology, site assembly, and environmental issues of domestic and residential buildings Thoroughly updated, with particular attention paid to the concept of building efficiency and improved integration of the topics covered to match current student needs New “at a glance” summaries at the beginning of each chapter A companion to Barry's Advanced Construction of Buildings, Fourth Edition Barry’s Introduction to Construction of Buildings is an excellent source of information for undergraduate students and those working towards similar NQF level 5 and 6 qualifications in building and construction.
Download or read book Energy and Environmental Issues for the Practising Architect written by Ian C. Ward and published by Thomas Telford. This book was released on 2004 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Producing an energy efficient and environmentally friendly building can be a daunting task for the every day architect, who may only be commissioned infrequently to produce such a building. This book aims to remove the mystery and complexity from this process by helping the architect understand and put into practice the many issues involved in generating an energy efficient and environmentally friendly design.
Download or read book Carpentry and Joinery written by Peter Brett and published by Nelson Thornes. This book was released on 2004 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by best-selling author Peter Breet, this new full-colour edition has been updated to match the revised carpentry and joinery qualifications.
Download or read book Building Construction Handbook written by Roy Chudley and published by Routledge. This book was released on 2013-05-07 with total page 914 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building Construction Handbook is an authoritative reference for all construction students and professionals. It is full of detailed drawings that clearly illustrate the construction of building elements. The principles and processes of construction are explained with the concepts of design included where appropriate. Extensive coverage of building construction practice and techniques, representing both traditional procedures and modern developments, are also included to provide the most comprehensive and easy to understand guide to building construction. This new edition has been updated to reflect the 2011 changes to the building regulations, as well as new material on energy performance, and substantial revisions of the section on structures.
Download or read book The Studio SOS Book written by Paul White and published by Taylor & Francis. This book was released on 2013-05-29 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advice and expertise from the guys who have seen it all in small studios, visiting dozens of project and home studios all over the world A structured look at the problems that most often plague small studios, with individual studio case studies addressing each issue Real solutions that you can both afford and implement; no thousand-dollar investments or idealized studio designs that don’t work with your space! Case studies that look at small studios’ specific problems, with additional break-outs tips that address quick fixes to common problems
Download or read book Building Thermal Envelope written by Jorge de Brito and published by MDPI. This book was released on 2020-03-27 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book results from a Special Issue published in Energies, entitled “Building Thermal Envelope". Its intent is to identify emerging research areas within the field of building thermal envelope solutions and contribute to the increased use of more energy-efficient solutions in new and refurbished buildings. Its contents are organized in the following sections: Building envelope materials and systems envisaging indoor comfort and energy efficiency; Building thermal and energy modelling and simulation; Lab test procedures and methods of field measurement to assess the performance of materials and building solutions; Smart materials and renewable energy in building envelope; Adaptive and intelligent building envelope; and Integrated building envelope technologies for high performance buildings and cities.
Download or read book Public School Emergency Preparedness written by Don Philpott and published by Rowman & Littlefield. This book was released on 2019-10-30 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt: In response to the ever-present threats facing our school systems, Public School Emergency Preparedness helps schools and institutions develop a comprehensive emergency response plan. This book outlines programs and procedures that can be applied to any school system which addresses hazard mitigation and prevention, emergency preparedness and response, and recovery and restoration to an effective learning environment. It describes specific actions and assigns responsibilities and response roles to district and individual school staff emergency teams, cooperating agencies, and community response partners as described in this plan. In the event of an emergency involving response by fire and/or law enforcement, this book also outlines the district/school site personnel who should establish an Incident Command System-based response organization in accordance with procedures outlined in the National Incident Management System. In addition, the author predetermines, to the extent possible, operational procedures across any U.S. school system and cooperating governmental, private, and volunteer agencies for responding to and recovering from any and all types of natural, human, or technology-based emergencies that may occur within school system operations or outside the jurisdiction of the school system but nonetheless cause/could cause collateral impact to school system operations.
Download or read book The Vertical City written by K. Al-Kodmany and published by WIT Press. This book was released on 2018-06-25 with total page 753 pages. Available in PDF, EPUB and Kindle. Book excerpt: Each century has its own unique approach toward addressing the problem of high density and the 21st century is no exception. As cities try to cope with rapid population growth - adding 2.5 billion dwellers by 2050 - and grapple with destructive sprawl, politicians, planners and architects have become increasingly interested in the vertical city paradigm. Unfortunately, cities all over the world are grossly unprepared for integrating tall buildings, as these buildings may aggravate multidimensional sustainability challenges resulting in a “vertical sprawl” that could have worse consequences than “horizontal” sprawl. By using extensive data and numerous illustrations this book provides a comprehensive guide to the successful and sustainable integration of tall buildings into cities. A new crop of skyscrapers that employ passive design strategies, green technologies, energy-saving systems and innovative renewable energy offers significant architectural improvements. At the urban scale, the book argues that planners must integrate tall buildings with efficient mass transit, walkable neighbourhoods, cycling networks, vibrant mixed-use activities, iconic transit stations, attractive plazas, well-landscaped streets, spacious parks and engaging public art. Particularly, it proposes the Tall Building and Transit Oriented Development (TB-TOD) model as one of the sustainable options for large cities going forward. Building on the work of leaders in the fields of ecological and sustainable design, this book will open readers’ eyes to a wider range of possibilities for utilizing green, resilient, smart, and sustainable features in architecture and urban planning projects. The 20 chapters offer comprehensive reading for all those interested in the planning, design, and construction of sustainable cities.