Download or read book Intermodulation Distortion Modelling and Measurement Techniques for GaN HEMT Characterization written by and published by kassel university press GmbH. This book was released on with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Intermodulation Distortion in GaN HEMT written by Ibrahim Khalil and published by Cuvillier Verlag. This book was released on 2010-01-03 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work treats intermodulation distortion performance of GaN-HEMT high-power transistors. A detailed study on the physical parameters influencing third-order intermodulation distortions is carried out, based on the large-signal model and on physical device simulation. Devices are characterized in terms of linearity by setting up a sophisticated measurement system. Among others, an electronic fuse is used at the drain side to avoid catastrophic failure during measurement. The bias-dependent transconductance characteristic is identified as the dominating source for intermodulation distortion in GaN HEMTs, while drain-source capacitance and access resistances have only minor influence. The corresponding physical parameters governing the transconductance behavior are determined and optimized structures for high linearity are proposed. Besides characterization and analysis of conventional designs, a novel device architecture for very high linearity is presented. Finally, performance of GaN HEMTs within a hybrid amplifier configuration is shown and the combination of high power, high linearity, and low-noise characteristics is highlighted.
Download or read book Parameter Extraction and Complex Nonlinear Transistor Models written by Gunter Kompa and published by Artech House. This book was released on 2019-12-31 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: All model parameters are fundamentally coupled together, so that directly measured individual parameters, although widely used and accepted, may initially only serve as good estimates. This comprehensive resource presents all aspects concerning the modeling of semiconductor field-effect device parameters based on gallium-arsenide (GaAs) and gallium nitride (GaN) technology. Metal-semiconductor field-effect transistors (MESFETs), high electron mobility transistors (HEMTs) and heterojunction bipolar transistors (HBTs), their structures and functions, and existing transistor models are also classified. The Shockley model is presented in order to give insight into semiconductor field-effect transistor (FET) device physics and explain the relationship between geometric and material parameters and device performance. Extraction of trapping and thermal time constants is discussed. A special section is devoted to standard nonlinear FET models applied to large-signal measurements, including static-/pulsed-DC and single-/two-tone stimulation. High power measurement setups for signal waveform measurement, wideband source-/load-pull measurement (including envelope source-/load pull) are also included, along with high-power intermodulation distortion (IMD) measurement setup (including envelope load-pull). Written by a world-renowned expert in the field, this book is the first to cover of all aspects of semiconductor FET device modeling in a single volume.
Download or read book Large signal Modeling of GaN HEMTs for Linear Power Amplifier Design written by Endalkachew Shewarega Mengistu and published by kassel university press GmbH. This book was released on 2008 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Basic Properties of III V Devices Understanding Mysterious Trapping Phenomena written by Kompa, Günter and published by kassel university press GmbH. This book was released on 2014 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt: Trapping effects in III-V devices pose a great challenge to any microwave device modeler. Understanding their physical origins is of prime importance to create physics-related reliable device models. The treatment of trapping phenomena is commonly beyond the classical higher-education level of communication engineers. This book provides any basic material needed to understand trapping effects occurring primarily in GaAs and GaN power HEMT devices. As the text material covers interdisciplinary topics such as crystal defects and localized charges, trap centers and trap dynamics, deep-level transient spectroscopy, and trap centers in passivation layers, the book will be of interest to graduate students of electrical engineering, communication engineering, and physics as well as materials, device, and circuit engineers in research and industry.
Download or read book Large Signal Modeling of GaN Device for High Power Amplifier Design written by Anwar Hasan Jarndal and published by kassel university press GmbH. This book was released on 2006 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modern RF and Microwave Measurement Techniques written by Valeria Teppati and published by Cambridge University Press. This book was released on 2013-06-20 with total page 475 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive, hands-on review of the most up-to-date techniques in RF and microwave measurement combines microwave circuit theory and metrology, in-depth analysis of advanced modern instrumentation, methods and systems, and practical advice for professional RF and microwave engineers and researchers. Topics covered include microwave instrumentation, such as network analyzers, real-time spectrum analyzers and microwave synthesizers; linear measurements, such as VNA calibrations, noise figure measurements, time domain reflectometry and multiport measurements; and non-linear measurements, such as load- and source-pull techniques, broadband signal measurements, and non-linear NVAs. Each technique is discussed in detail and accompanied by state-of-the-art solutions to the unique technical challenges associated with its use. With each chapter written by internationally recognised experts in the field, this is an invaluable resource for researchers and professionals involved with microwave measurements.
Download or read book Advances in Microelectronics Reviews Vol 1 written by Sergey Yurish and published by Lulu.com. This book was released on 2018-01-12 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 1st volume of 'Advances in Microelectronics: Reviews' Book Series contains 19 chapters written by 72 authors from academia and industry from 16 countries. With unique combination of information in each volume, the 'Advances in Microelectronics: Reviews' Book Series will be of value for scientists and engineers in industry and at universities. In order to offer a fast and easy reading of the state of the art of each topic, every chapter in this book is independent and self-contained. All chapters have the same structure: first an introduction to specific topic under study; second particular field description including sensing applications. Each of chapter is ending by well selected list of references with books, journals, conference proceedings and web sites. This book ensures that readers will stay at the cutting edge of the field and get the right and effective start point and road map for the further researches and developments.
Download or read book Control Components Using Si GaAs and GaN Technologies written by Inder J. Bahl and published by Artech House. This book was released on 2014-09-01 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control circuits are important parts of RF and microwave systems. Their compact size, high performance, and low cost have played a vital role in the development of cost effective solutions and new applications during the past quarter century. This book provides a comprehensive treatment of such circuits, including device operation and their models, basic circuit theory and designs, and applications. The unique features of this book include in-depth and comprehensive study of control circuits, extensive design equations and figures, treatment of practical aspect of circuits and description of fabrication technologies. It provides you with a broad view of solid state control circuits including various technologies and their comparison and up to date information.
Download or read book Neural Information Processing written by Tingwen Huang and published by Springer. This book was released on 2012-11-05 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt: The five volume set LNCS 7663, LNCS 7664, LNCS 7665, LNCS 7666 and LNCS 7667 constitutes the proceedings of the 19th International Conference on Neural Information Processing, ICONIP 2012, held in Doha, Qatar, in November 2012. The 423 regular session papers presented were carefully reviewed and selected from numerous submissions. These papers cover all major topics of theoretical research, empirical study and applications of neural information processing research. The 5 volumes represent 5 topical sections containing articles on theoretical analysis, neural modeling, algorithms, applications, as well as simulation and synthesis.
Download or read book Nonlinear Circuit Simulation and Modeling written by José Carlos Pedro and published by Cambridge University Press. This book was released on 2018-06-14 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover the nonlinear methods and tools needed to design real-world microwave circuits with this tutorial guide. Balancing theoretical background with practical tools and applications, it covers everything from the basic properties of nonlinear systems such as gain compression, intermodulation and harmonic distortion, to nonlinear circuit analysis and simulation algorithms, and state-of-the-art equivalent circuit and behavioral modeling techniques. Model formulations discussed in detail include time-domain transistor compact models and frequency-domain linear and nonlinear scattering models. Learn how to apply these tools to designing real circuits with the help of a power amplifier design example, which covers all stages from active device model extraction and the selection of bias and terminations, through to performance verification. Realistic examples, illustrative insights and clearly conveyed mathematical formalism make this an essential learning aid for both professionals working in microwave and RF engineering and graduate students looking for a hands-on guide to microwave circuit design.
Download or read book Fundamentals of Terahertz Devices and Applications written by Dimitris Pavlidis and published by John Wiley & Sons. This book was released on 2021-07-19 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: An authoritative and comprehensive guide to the devices and applications of Terahertz technology Terahertz (THz) technology relates to applications that span in frequency from a few hundred GHz to more than 1000 GHz. Fundamentals of Terahertz Devices and Applications offers a comprehensive review of the devices and applications of Terahertz technology. With contributions from a range of experts on the topic, this book contains in a single volume an inclusive review of THz devices for signal generation, detection and treatment. Fundamentals of Terahertz Devices and Applications offers an exploration and addresses key categories and aspects of Terahertz Technology such as: sources, detectors, transmission, electronic considerations and applications, optical (photonic) considerations and applications. Worked examples—based on the contributors' extensive experience— highlight the chapter material presented. The text is designed for use by novices and professionals who want a better understanding of device operation and use, and is suitable for instructional purposes This important book: Offers the most relevant up-to-date research information and insight into the future developments in the technology Addresses a wide-range of categories and aspects of Terahertz technology Includes material to support courses on Terahertz Technology and more Contains illustrative worked examples Written for researchers, students, and professional engineers, Fundamentals of Terahertz Devices and Applications offers an in-depth exploration of the topic that is designed for both novices and professionals and can be adopted for instructional purposes.
Download or read book GaN HEMT Modeling Including Trapping Effects Based on Chalmers Model and Pulsed S Parameter Measurements written by Peng Luo and published by Cuvillier Verlag. This book was released on 2019-01-09 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: GaN HEMTs are regarded as one of the most promising RF power transistor technologies thanks to their high-voltage high-speed characteristics. However, they are still known to be prone to trapping effects, which hamper achievable output power and linearity. Hence, accurately and efficiently modeling the trapping effects is crucial in nonlinear large-signal modeling for GaN HEMTs. This work proposes a trap model based on Chalmers model, an industry standard large-signal model. Instead of a complex nonlinear trap description, only four constant parameters of the proposed trap model need to be determined to accurately describe the significant impacts of the trapping effects, e.g., drain-source current slump, typical kink observed in pulsed I/V characteristics, and degradation of the output power. Moreover, the extraction procedure of the trap model parameters is based on pulsed S-parameter measurements, which allow to freeze traps and isolate the trapping effects from self-heating. The model validity is tested through small- and large-signal model verification procedures. Particularly, it is shown that the use of this trap model enables to dramatically improve the large-signal simulation results.
Download or read book Characteristics Optimization and Integrated Circuit Applications of Aluminum Gallium Nitride gallium Nitride High Electron Mobility Transistors written by Bruce McRae Green and published by . This book was released on 2001 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Abstracts written by and published by . This book was released on 2002 with total page 2616 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Reliability for Industry 3 written by Abdelkhalak El Hami and published by John Wiley & Sons. This book was released on 2023-04-03 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Reliability for Industry 3 illustrates the multidisciplinary state-of-the-art science of operational reliability. Many experts are now convinced that reliability is not limited to statistical sciences. In fact, many different disciplines interact in order to bring a product to its highest possible level of reliability, made available through today’s technologies, developments and production methods. These three books, of which this is the third, propose new methods for analyzing the lifecycle of a system, enabling us to record the development phases according to development time and levels of complexity for its integration. Operational reliability, as presented in Applied Reliability for Industry 3, verifies the reliability performance of the mechatronic system in real life through an analysis of field data.
Download or read book Intermodulation Distortion in Microwave and Wireless Circuits written by José Carlos Pedro and published by Artech House. This book was released on 2003 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique new book is your single resource for all issues related to intermodulation and multi-tone distortion in microwave and wireless circuits. Beginning with an overview of the general concepts of distortion in microwave and wireless devices, it delves into the theory and practical aspects of nonlinear distortion, tools for nonlinear analysis, mathematical representations of wireless circuits and devices, and design methods for minimizing distortion.
