Download or read book Intermediate Solid Mechanics written by Marko V. Lubarda and published by Cambridge University Press. This book was released on 2020-01-09 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on class-tested material, this concise yet comprehensive treatment of the fundamentals of solid mechanics is ideal for those taking single-semester courses on the subject. It provides interdisciplinary coverage of the key topics, combining solid mechanics with structural design applications, mechanical behavior of materials, and the finite element method. Part I covers basic theory, including the analysis of stress and strain, Hooke's law, and the formulation of boundary-value problems in Cartesian and cylindrical coordinates. Part II covers applications, from solving boundary-value problems, to energy methods and failure criteria, two-dimensional plane stress and strain problems, antiplane shear, contact problems, and much more. With a wealth of solved examples, assigned exercises, and 130 homework problems, and a solutions manual available online, this is ideal for senior undergraduates studying solid mechanics, and graduates taking introductory courses in solid mechanics and theory of elasticity, across aerospace, civil and mechanical engineering, and materials science.
Download or read book Intermediate Mechanics of Materials written by J. R. Barber and published by Springer Science & Business Media. This book was released on 2010-11-02 with total page 629 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the essential topics for a second-level course in strength of materials or mechanics of materials, with an emphasis on techniques that are useful for mechanical design. Design typically involves an initial conceptual stage during which many options are considered. At this stage, quick approximate analytical methods are crucial in determining which of the initial proposals are feasible. The ideal would be to get within 30% with a few lines of calculation. The designer also needs to develop experience as to the kinds of features in the geometry or the loading that are most likely to lead to critical conditions. With this in mind, the author tries wherever possible to give a physical and even an intuitive interpretation to the problems under investigation. For example, students are encouraged to estimate the location of weak and strong bending axes and the resulting neutral axis of bending before performing calculations, and the author discusses ways of getting good accuracy with a simple one degree of freedom Rayleigh-Ritz approximation. Students are also encouraged to develop a feeling for structural deformation by performing simple experiments in their outside environment, such as estimating the radius to which an initially straight bar can be bent without producing permanent deformation, or convincing themselves of the dramatic difference between torsional and bending stiffness for a thin-walled open beam section by trying to bend and then twist a structural steel beam by hand-applied loads at one end. In choosing dimensions for mechanical components, designers will expect to be guided by criteria of minimum weight, which with elementary calculations, generally leads to a thin-walled structure as an optimal solution. This consideration motivates the emphasis on thin-walled structures, but also demands that students be introduced to the limits imposed by structural instability. Emphasis is also placed on the effect of manufacturing errors on such highly-designed structures - for example, the effect of load misalignment on a beam with a large ratio between principal stiffness and the large magnification of initial alignment or loading errors in a strut below, but not too far below the buckling load. Additional material can be found on http://extras.springer.com/ .
Download or read book Intermediate Solid Mechanics written by Marko V. Lubarda and published by Cambridge University Press. This book was released on 2020-01-09 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt: A concise yet comprehensive treatment of the fundamentals of solid mechanics, including solved examples, exercises, and homework problems.
Download or read book Advanced Solid Mechanics written by Farzad Hejazi and published by CRC Press. This book was released on 2021-05-09 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main aim of this book is to demonstrate the fundamental theory of advanced solid mechanics through simplified derivations with details illustrations to deliver the principal concepts. It covers all conceptual principals on two- and three-dimensional stresses, strains, stress-strain relations, theory of elasticity and theory of plasticity in any type of solid materials including anisotropic, orthotropic, homogenous and isotropic. Detailed explanation and clear diagrams and drawings are accompanied with the use of proper jargons and notations to present the ideas and appropriate guide the readers to explore the core of the advanced solid mechanics backed by case studies and examples. Aimed at undergraduate, senior undergraduate students in advanced solid mechanics, solid mechanics, strength of materials, civil/mechanical engineering, this book Provides simplified explanation and detailed derivation of correlation and formula implemented in advanced solid mechanics Covers state of two and three-dimensional stresses and strains in solid materials in various conditions Describes principal constitutive models for various type of materials include of anisotropic, orthotropic, homogenous and isotropic materials. Includes stress-strain relation and theory of elasticity for solid materials. Explores inelastic behaviour of material, theory of plasticity and yielding criteria.
Download or read book Solid Mechanics written by William F. Hosford and published by Cambridge University Press. This book was released on 2010-03-22 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a textbook for courses in civil and mechanical engineering that are commonly called Strength of Materials or Mechanics of Materials. The intent of this book is to provide a background in the mechanics of solids for students of mechanical engineering, while limiting the information on why materials behave as they do. It is assumed that the students have already had courses covering materials science and basic statics. Much of the material is drawn from another book by the author, Mechanical Behavior of Materials. To make the text suitable for mechanical engineers, the chapters on slip, dislocations, twinning, residual stresses, and hardening mechanisms have been eliminated and the treatment of ductility viscoelasticity, creep, ceramics, and polymers has been simplified.
Download or read book Advanced Solid Mechanics written by Philip Roy Lancaster and published by Palgrave. This book was released on 1980 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Mechanics of Materials written by Roman Solecki and published by Oxford University Press on Demand. This book was released on 2003 with total page 764 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an advanced mechanics of materials textbook dedicated to senior undergraduate or beginning graduate students in mechanical, civil, and aeronautical engineering departments. The text covers subject matter generally referred to as advanced mechanics of materials or advanced strength of materials. The course is commonly called Intermediate/Advanced Strength of Materials, Advanced Mechanics of Materials, or Advanced Mechanics of Solids. This course follows an elementary Solid Mechanics (Vable OUP 2002) course and is taken by most structural engineering majors and aero majors. Unique features of Solecki/Conant include introduction to model topics such as fracture mechanics and viscoelasticity. Unlike the competition, the textbook introduces more applications to contemporary practice, as well as modern computer tools such as MATLAB.
Download or read book Advanced Mechanics of Materials written by Arthur P. Boresi and published by John Wiley & Sons. This book was released on 2002-10-22 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated and reorganized, each of the topics covered in this text is thoroughly developed from fundamental principles. The assumptions, applicability and limitations of the methods are clearly discussed.
Download or read book Solid Mechanics in Engineering written by Raymond Parnes and published by . This book was released on 2001-11-28 with total page 758 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a systematic, modern introduction to solid mechanics that is carefully motivated by realistic Engineering applications. Based on 25 years of teaching experience, Raymond Parnes uses a wealth of examples and a rich set of problems to build the reader's understanding of the scientific principles, without requiring 'higher mathematics'. Highlights of the book include The use of modern SI units throughout A thorough presentation of the subject stressing basic unifying concepts Comprehensive coverage, including topics such as the behaviour of materials on a phenomenological level Over 600 problems, many of which are designed for solving with MATLAB, MAPLE or MATHEMATICA. Solid Mechanics in Engineering is designed for 2-semester courses in Solid Mechanics or Strength of Materials taken by students in Mechanical, Civil or Aeronautical Engineering and Materials Science and may also be used for a first-year graduate program.
Download or read book Engineering Solid Mechanics written by Abdel-Rahman A. Ragab and published by Routledge. This book was released on 2018-02-06 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Solid Mechanics bridges the gap between elementary approaches to strength of materials and more advanced, specialized versions on the subject. The book provides a basic understanding of the fundamentals of elasticity and plasticity, applies these fundamentals to solve analytically a spectrum of engineering problems, and introduces advanced topics of mechanics of materials - including fracture mechanics, creep, superplasticity, fiber reinforced composites, powder compacts, and porous solids. Text includes: stress and strain, equilibrium, and compatibility elastic stress-strain relations the elastic problem and the stress function approach to solving plane elastic problems applications of the stress function solution in Cartesian and polar coordinates Problems of elastic rods, plates, and shells through formulating a strain compatibility function as well as applying energy methods Elastic and elastic-plastic fracture mechanics Plastic and creep deformation Inelastic deformation and its applications This book presents the material in an instructive manner, suitable for individual self-study. It emphasizes analytical treatment of the subject, which is essential for handling modern numerical methods as well as assessing and creating software packages. The authors provide generous explanations, systematic derivations, and detailed discussions, supplemented by a vast variety of problems and solved examples. Primarily written for professionals and students in mechanical engineering, Engineering Solid Mechanics also serves persons in other fields of engineering, such as aerospace, civil, and material engineering.
Download or read book Multiscale Solid Mechanics written by Holm Altenbach and published by Springer Nature. This book was released on 2020-11-09 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of the current of the state of the art in the multiscale mechanics of solids and structures. It comprehensively discusses new materials, including theoretical and experimental investigations their durability and strength, as well as fractures and damage
Download or read book Non Linear Mechanics of Materials written by Jacques Besson and published by Springer Science & Business Media. This book was released on 2009-11-25 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: In mechanical engineering and structural analysis there is a significant gap between the material models currently used by engineers for industry applications and those already available in research laboratories. This is especially apparent with the huge progress of computational possibilities and the corresponding dissemination of numerical tools in engineering practice, which essentially deliver linear solutions. Future improvements of design and life assessment methods necessarily involve non-linear solutions for inelastic responses, in plasticity or viscoplasticity, as well as damage and fracture analyses. The dissemination of knowledge can be improved by software developments, data base completion and generalization, but also by information and training. With such a perspective Non-Linear Mechanics of Materials proposes a knowledge actualization, in order to better understand and use recent material constitutive and damage modeling methods in the context of structural analysis or multiscale material microstructure computations.
Download or read book Mechanics and Strength of Materials written by Vitor Dias da Silva and published by Springer Science & Business Media. This book was released on 2006-01-16 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gives a clear and thorough presentation of the fundamental principles of mechanics and strength of materials. Provides both the theory and applications of mechanics of materials on an intermediate theoretical level. Useful as a reference tool by postgraduates and researchers in the fields of solid mechanics as well as practicing engineers.
Download or read book Solid Mechanics written by William F. Hosford and published by Cambridge University Press. This book was released on 2010-03-22 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a background in the mechanics of solids for students of mechanical engineering, while limiting the information on why materials behave as they do. It is assumed that the students have already had courses covering materials science and basic statics. Much of the material is drawn from another book by the author, Mechanical Behavior of Materials. To make the text suitable for mechanical engineers, the chapters on slip, dislocations, twinning, residual stresses, and hardening mechanisms have been eliminated and the treatment of ductility, viscoelasticity, creep, ceramics, and polymers has been simplified.
Download or read book Foundations of Nanomechanics written by Andrew N. Cleland and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text provides an introduction, at the level of an advanced student in engineering or physics, to the field of nanomechanics and nanomechanical devices. It provides a unified discussion of solid mechanics, transducer applications, and sources of noise and nonlinearity in such devices. Demonstrated applications of these devices, as well as an introduction to fabrication techniques, are also discussed. The text concludes with an overview of future technologies, including the potential use of carbon nanotubes and other molecular assemblies.
Download or read book Intermediate Mechanics of Materials written by J. R. Barber and published by McGraw-Hill Europe. This book was released on 2001 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: Class-tested by the author in its early versions, this book provides a fresh, modern approach to a topic often considered dry and difficult."--Jacket.
Download or read book Mechanics of Solids and Materials written by Robert Asaro and published by Cambridge University Press. This book was released on 2006-01-16 with total page 888 pages. Available in PDF, EPUB and Kindle. Book excerpt: This 2006 book combines modern and traditional solid mechanics topics in a coherent theoretical framework.
