Download or read book Interlaboratory Study of Adhesion Using Voltage Contrast XPS written by JD. Miller and published by . This book was released on 1996 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: An interlaboratory study (ILS) was conducted to determine the utility and precision of a test method for measuring fiber/matrix adhesion of carbon fiber-reinforced polymer matrix composites. The test method is based on voltage contrast X-ray photoelectron spectroscopy (VCXPS). The technique provides a quantitative measure of the relative amount of exposed fiber and exposed matrix at the fracture surface of a failed composite specimen. Eleven laboratories participated in two rounds of interlaboratory testing. The first round or pilot run was conducted to familiarize laboratories with the technique. Each laboratory collected data on one of eight material variants to compare with data from the host laboratory. In the second round each laboratory analyzed different coupons from the same composite laminate. Repeatability and reproducibility statistics were calculated and demonstrated that the method has interlaboratory utility. Precision statistics were influenced by the heterogeneity of samples generated from a single-carbon fiber-reinforced polymer matrix composite laminate.
Download or read book Fiber Matrix and Interface Properties written by Christopher J. Spragg and published by ASTM International. This book was released on 1996 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emphasizing fiber-matrix adhesion and its characterization in composite materials, reports results from applying the most commonly used test methods, such as fragmentation, pull-out, and indentation, to high-performance composites and their constituents. The 13 papers were presented at a symposium i
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1997 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials and Process Affordability written by Howard S. Kliger and published by Advancement of Materials and Process Engineering. This book was released on 1998 with total page 1168 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Combined Effects of Moisture Temperature Fiber Architecture and Sustained Load on the Mechanical and Microstructural Properties of Notched and Unnotched E glass vinyl Ester Composite Materials written by Stephanie Elizabeth Buck and published by . This book was released on 1999 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Surface and Thin Film Analysis written by Gernot Friedbacher and published by Wiley-VCH. This book was released on 2011-06-07 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surveying and comparing all techniques relevant for practical applications in surface and thin film analysis, this second edition of a bestseller is a vital guide to this hot topic in nano- and surface technology. This new book has been revised and updated and is divided into four parts - electron, ion, and photon detection, as well as scanning probe microscopy. New chapters have been added to cover such techniques as SNOM, FIM, atom probe (AP),and sum frequency generation (SFG). Appendices with a summary and comparison of techniques and a list of equipment suppliers make this book a rapid reference for materials scientists, analytical chemists, and those working in the biotechnological industry. From a Review of the First Edition (edited by Bubert and Jenett) "... a useful resource..." (Journal of the American Chemical Society)
Download or read book ASTM Standardization News written by American Society for Testing and Materials and published by . This book was released on 1994 with total page 1080 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Adhesive Technology Revised and Expanded written by Antonio Pizzi and published by CRC Press. This book was released on 2003-08-06 with total page 1060 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Adhesive Technology, Second Edition exceeds the ambition of its bestselling forerunner by reexamining the mechanisms driving adhesion, categories of adhesives, techniques for bond formation and evaluation, and major industrial applications. Integrating modern technological innovations into adhesive preparation and application, this greatly expanded and updated edition comprises a total of 26 different adhesive groupings, including three new classes. The second edition features ten new chapters, a 40-page list of resources on adhesives, and abundant figures, tables, equations.
Download or read book Surface Analysis Methods in Materials Science written by D.J. O'Connor and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: The idea for this book stemmed from a remark by Philip Jennings of Murdoch University in a discussion session following a regular meeting of the Australian Surface Science group. He observed that a text on surface analysis and applica tions to materials suitable for final year undergraduate and postgraduate science students was not currently available. Furthermore, the members of the Australian Surface Science group had the research experience and range of coverage of sur face analytical techniques and applications to provide a text for this purpose. A of techniques and applications to be included was agreed at that meeting. The list intended readership of the book has been broadened since the early discussions, particularly to encompass industrial users, but there has been no significant alter ation in content. The editors, in consultation with the contributors, have agreed that the book should be prepared for four major groups of readers: - senior undergraduate students in chemistry, physics, metallurgy, materials science and materials engineering; - postgraduate students undertaking research that involves the use of analytical techniques; - groups of scientists and engineers attending training courses and workshops on the application of surface analytical techniques in materials science; - industrial scientists and engineers in research and development seeking a description of available surface analytical techniques and guidance on the most appropriate techniques for particular applications. The contributors mostly come from Australia, with the notable exception of Ray Browning from Stanford University.
Download or read book Surface Analysis written by John C. Vickerman and published by John Wiley & Sons. This book was released on 2011-08-10 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: This completely updated and revised second edition of Surface Analysis: The Principal Techniques, deals with the characterisation and understanding of the outer layers of substrates, how they react, look and function which are all of interest to surface scientists. Within this comprehensive text, experts in each analysis area introduce the theory and practice of the principal techniques that have shown themselves to be effective in both basic research and in applied surface analysis. Examples of analysis are provided to facilitate the understanding of this topic and to show readers how they can overcome problems within this area of study.
Download or read book Advanced Techniques for Surface Engineering written by W. Gissler and published by . This book was released on 2014-01-15 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Practical Surface Analysis Auger and X ray Photoelectron Spectroscopy written by D. Briggs and published by Wiley. This book was released on 1996-07-25 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an updated manual covering the theory and practice of X-ray photoelectron spectroscopy (XPS) and Auger electron spectroscopy (AES) techniques for surface analysis. Topics covered include historical development; all relevant theory for data interpretation and a description of instrumentation; the major fields of applications, such as metallurgy, polymers, semiconductors, and corrosion science; catalysis; and many appendices of essential data for day-to-day use. This new edition also takes into account improvements in equipment, experimental procedures and data interpretation over the last seven years.
Download or read book Surface Chemical Analysis written by and published by . This book was released on 2010 with total page 27 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book National Semiconductor Metrology Program written by National Institute of Standards and Technology (U.S.) and published by . This book was released on 1995 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Molecule Metal Interface written by Norbert Koch and published by John Wiley & Sons. This book was released on 2013-02-08 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviewing recent progress in the fundamental understanding of the molecule-metal interface, this useful addition to the literature focuses on experimental studies and introduces the latest analytical techniques as applied to this interface. The first part covers basic theory and initial principle studies, while the second part introduces readers to photoemission, STM, and synchrotron techniques to examine the atomic structure of the interfaces. The third part presents photoelectron spectroscopy, high-resolution UV photoelectron spectroscopy and electron spin resonance to study the electronic structure of the molecule-metal interface. In the closing chapter the editors discuss future perspectives. Written as a senior graduate or senior undergraduate textbook for students in physics, chemistry, materials science or engineering, the book's interdisciplinary approach makes it equally relevant for researchers working in the field of organic and molecular electronics.
Download or read book Surface Analysis by Auger and X ray Photoelectron Spectroscopy written by David Briggs and published by Im Publications. This book was released on 2003-01-01 with total page 899 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Introduction to Surface Analysis by XPS and AES written by John F. Watts and published by John Wiley & Sons. This book was released on 2019-08-27 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a concise yet comprehensive introduction to XPS and AES techniques in surface analysis This accessible second edition of the bestselling book, An Introduction to Surface Analysis by XPS and AES, 2nd Edition explores the basic principles and applications of X-ray Photoelectron Spectroscopy (XPS) and Auger Electron Spectroscopy (AES) techniques. It starts with an examination of the basic concepts of electron spectroscopy and electron spectrometer design, followed by a qualitative and quantitative interpretation of the electron spectrum. Chapters examine recent innovations in instrument design and key applications in metallurgy, biomaterials, and electronics. Practical and concise, it includes compositional depth profiling; multi-technique analysis; and everything about samples—including their handling, preparation, stability, and more. Topics discussed in more depth include peak fitting, energy loss background analysis, multi-technique analysis, and multi-technique profiling. The book finishes with chapters on applications of electron spectroscopy in materials science and the comparison of XPS and AES with other analytical techniques. Extensively revised and updated with new material on NAPXPS, twin anode monochromators, gas cluster ion sources, valence band spectra, hydrogen detection, and quantification Explores key spectroscopic techniques in surface analysis Provides descriptions of latest instruments and techniques Includes a detailed glossary of key surface analysis terms Features an extensive bibliography of key references and additional reading Uses a non-theoretical style to appeal to industrial surface analysis sectors An Introduction to Surface Analysis by XPS and AES, 2nd Edition is an excellent introductory text for undergraduates, first-year postgraduates, and industrial users of XPS and AES.
