Download or read book Interference Suppression in Multiple Access Communications Using M Ary Phase Shift Keying Generated Via Spectral Encoding written by Abel S. Nunez and published by . This book was released on 2004-03-01 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt: A conceptual transform domain communication system (TDCS) is shown capable of operating successfully using M-Ary phase shift keying (MPSK) data modulation in a multiple access environment. Using spectral encoding, the conceptual TDCS provides an effective means for mitigating interference affects while achieving multiple access communications. The use of transform domain processing with MPSK data modulation (TD-MPSK) provides higher spectral efficiency relative to other modulation techniques (antipodal signaling and cyclic shift keying) considered previously for TDCS applications. The proposed TD-MPSK technique uses spectral encoding for both data and multiple access phase modulations. Demodulation of the spectrally encoded TD-MPSK communication symbols is accomplished using conventional, multi-channel time domain correlation techniques. Analytic expressions for TD-MPSK probability of symbol error (PE) and probability of bit error (PB) are derived and validated using simulated results over the range of signal-to-noise ratios typically considered for communications. This validation includes scenarios with: 1) multiple access interference, 2) spectral notching, 3) jamming present and 4) combinations of all three. For a J/S of 3.14 dB and a Eb/N0 of 6 dB, PB dropped by up to a factor of 3 for TD-QPSK in a MA environment for the case when spectral notching was present versus the case when spectral notching wasn't present. The cross- correlation between communication symbols of different synchronous users can be made identically zero through proper selection of multiple access phase codes (orthogonal signaling). For a synchronous network containing orthogonal users, PE and PB are unaffected as the number of orthogonal network users increases. For a J/S of 3.14 dB and a Eb/N0 of 6 dB, PB dropped by a factor of 12 for TD- QPSK in a MA environment for the case when spectral notching was present versus the case when spectral notching wasn't present.

Download or read book Electrical Electronics Abstracts written by and published by . This book was released on 1997 with total page 1904 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Introduction to Communication Systems written by Upamanyu Madhow and published by Cambridge University Press. This book was released on 2014-11-24 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: An accessible undergraduate textbook introducing key fundamental principles behind modern communication systems, supported by exercises, software problems and lab exercises.

Download or read book Fundamentals of Wireless Communication written by David Tse and published by Cambridge University Press. This book was released on 2005-05-26 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook takes a unified view of the fundamentals of wireless communication and explains cutting-edge concepts in a simple and intuitive way. An abundant supply of exercises make it ideal for graduate courses in electrical and computer engineering and it will also be of great interest to practising engineers.

Download or read book Modulation and Coding Techniques in Wireless Communications written by Evgenii Krouk and published by John Wiley & Sons. This book was released on 2011-02-21 with total page 691 pages. Available in PDF, EPUB and Kindle. Book excerpt: The high level of technical detail included in standards specifications can make it difficult to find the correlation between the standard specifications and the theoretical results. This book aims to cover both of these elements to give accessible information and support to readers. It explains the current and future trends on communication theory and shows how these developments are implemented in contemporary wireless communication standards. Examining modulation, coding and multiple access techniques, the book is divided into two major sections to cover these functions. The two-stage approach first treats the basics of modulation and coding theory before highlighting how these concepts are defined and implemented in modern wireless communication systems. Part 1 is devoted to the presentation of main L1 procedures and methods including modulation, coding, channel equalization and multiple access techniques. In Part 2, the uses of these procedures and methods in the wide range of wireless communication standards including WLAN, WiMax, WCDMA, HSPA, LTE and cdma2000 are considered. An essential study of the implementation of modulation and coding techniques in modern standards of wireless communication Bridges the gap between the modulation coding theory and the wireless communications standards material Divided into two parts to systematically tackle the topic - the first part develops techniques which are then applied and tailored to real world systems in the second part Covers special aspects of coding theory and how these can be effectively applied to improve the performance of wireless communications systems

Download or read book International Aerospace Abstracts written by and published by . This book was released on 1984 with total page 922 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Wireless Communications written by Andreas F. Molisch and published by John Wiley & Sons. This book was released on 2012-02-06 with total page 883 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Professor Andreas F. Molisch, renowned researcher and educator, has put together the comprehensive book, Wireless Communications. The second edition, which includes a wealth of new material on important topics, ensures the role of the text as the key resource for every student, researcher, and practitioner in the field." —Professor Moe Win, MIT, USA Wireless communications has grown rapidly over the past decade from a niche market into one of the most important, fast moving industries. Fully updated to incorporate the latest research and developments, Wireless Communications, Second Edition provides an authoritative overview of the principles and applications of mobile communication technology. The author provides an in-depth analysis of current treatment of the area, addressing both the traditional elements, such as Rayleigh fading, BER in flat fading channels, and equalisation, and more recently emerging topics such as multi-user detection in CDMA systems, MIMO systems, and cognitive radio. The dominant wireless standards; including cellular, cordless and wireless LANs; are discussed. Topics featured include: wireless propagation channels, transceivers and signal processing, multiple access and advanced transceiver schemes, and standardised wireless systems. Combines mathematical descriptions with intuitive explanations of the physical facts, enabling readers to acquire a deep understanding of the subject. Includes new chapters on cognitive radio, cooperative communications and relaying, video coding, 3GPP Long Term Evolution, and WiMax; plus significant new sections on multi-user MIMO, 802.11n, and information theory. Companion website featuring: supplementary material on 'DECT', solutions manual and presentation slides for instructors, appendices, list of abbreviations and other useful resources.

Download or read book Synchronization in Digital Communication Systems written by Fuyun Ling and published by Cambridge University Press. This book was released on 2017-06-22 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical guide helps readers to learn how to develop and implement synchronization functions in digital communication systems.

Download or read book Cellular Internet of Things written by Olof Liberg and published by Academic Press. This book was released on 2019-11-28 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cellular Internet of Things: From Massive Deployments to Critical 5G Applications, Second Edition, gives insights into the recent and rapid work performed by the 3rd Generation Partnership Project (3GPP) and the Multefire Alliance (MFA) to develop systems for the Cellular IoT. Beyond the technologies, readers will learn what the mMTC and cMTC market segments look like, deployment options and expected performance in terms of system capacity, expected battery lifetime, data throughput, access delay time and device cost, regulations for operation in unlicensed frequency bands, and how they impact system design and performance. This new edition contains updated content on the latest EC-GSM IoT, LTE-M and NB-IoT features in 3GPP Release 15, critical communication, i.e. URLLC, specified in 3GPP Release 15 for both LTE and NR, LTE-M and NB-IoT for unlicensed frequency bands specified in the Multefire Alliance (MFA), and an updated outlook of what the future holds in Industrial IoT and drone communications, amongst other topics. - Provides ubiquitous wireless connectivity for a diverse range of services and applications, describing their performance and how their specifications were developed to meet the most demanding requirements - Describes licensed and unlicensed technologies based on 2G, 4G and 5G technologies and how they have evolved towards the Cellular IoT - Presents the Narrowband Internet of Things technology and how GSM, LTE and NR have been designed to provide Cellular Internet of Things services - Provides use cases that cover ultra-low complex systems connecting billions of devices (massive MTC, mMTC), critical MTC and cMTC based on Ultra-Reliable and Low Latency Communications (URLLC) to meet strict latency and reliability requirements

Download or read book Software Defined Radio for Engineers written by Alexander M. Wyglinski and published by Artech House. This book was released on 2018-04-30 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the popular Artech House classic, Digital Communication Systems Engineering with Software-Defined Radio, this book provides a practical approach to quickly learning the software-defined radio (SDR) concepts needed for work in the field. This up-to-date volume guides readers on how to quickly prototype wireless designs using SDR for real-world testing and experimentation. This book explores advanced wireless communication techniques such as OFDM, LTE, WLA, and hardware targeting. Readers will gain an understanding of the core concepts behind wireless hardware, such as the radio frequency front-end, analog-to-digital and digital-to-analog converters, as well as various processing technologies. Moreover, this volume includes chapters on timing estimation, matched filtering, frame synchronization message decoding, and source coding. The orthogonal frequency division multiplexing is explained and details about HDL code generation and deployment are provided. The book concludes with coverage of the WLAN toolbox with OFDM beacon reception and the LTE toolbox with downlink reception. Multiple case studies are provided throughout the book. Both MATLAB and Simulink source code are included to assist readers with their projects in the field.

Download or read book Digital Communications written by John G. Proakis and published by . This book was released on 2008-01 with total page 1150 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital Communications is a classic book in the area that is designed to be used as a senior or graduate level text. The text is flexible and can easily be used in a one semester course or there is enough depth to cover two semesters. Its comprehensive nature makes it a great book for students to keep for reference in their professional careers. This all-inclusive guide delivers an outstanding introduction to the analysis and design of digital communication systems. Includes expert coverage of new topics: Turbocodes, Turboequalization, Antenna Arrays, Digital Cellular Systems, and Iterative Detection. Convenient, sequential organization begins with a look at the history and classification of channel models and builds from there.

Download or read book Deep Space Telecommunications Systems Engineering written by Joseph H. Yuen and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 615 pages. Available in PDF, EPUB and Kindle. Book excerpt: The challenge of communication in planetary exploration has been unusual. The guidance and control of spacecraft depend on reliable communication. Scientific data returned to earth are irreplaceable, or replaceable only at the cost of another mission. In deep space, communications propagation is good, relative to terrestrial communications, and there is an opportunity to press toward the mathematical limit of microwave communication. Yet the limits must be approached warily, with reliability as well as channel capacity in mind. Further, the effects of small changes in the earth's atmosphere and the interplanetary plasma have small but important effects on propagation time and hence on the measurement of distance. Advances are almost incredible. Communication capability measured in 18 bits per second at a given range rose by a factor of 10 in the 19 years from Explorer I of 1958 to Voyager of 1977. This improvement was attained through ingenious design based on the sort of penetrating analysis set forth in this book by engineers who took part in a highly detailed and amazingly successful pro gram. Careful observation and analysis have told us much about limitations on the accurate measurement of distance. It is not easy to get busy people to tell others clearly and in detail how they have solved important problems. Joseph H. Yuen and the other contribu tors to this book are to be commended for the time and care they have devoted to explicating one vital aspect of a great adventure of mankind.

Download or read book Digital Modulation Techniques written by Fuqin Xiong and published by Artech House Publishers. This book was released on 2006 with total page 1056 pages. Available in PDF, EPUB and Kindle. Book excerpt: This newly revised and expanded edition of an Artech House classic builds on its success as far and away the most comprehensive guide to digital modulation techniques used in communications today. The second edition adds a wealth of up-to-date, critical material, including: Five new chapters devoted to orthogonal frequency division multiplexing (OFDM) covering its basics and practical implementation issues: peak-to-average power ratio (PAPR) reduction, synchronization, fading channel performance, and mitigation methods, as well as the newest developments such as wavelet OFDM schemes; New modulations for optical communications; Enhanced coverage of M-ary amplitude shift keying (ASK); More accurate bit error rate (BER) equations for quaternary phase shift keying (QPSK) and quadrature amplitude modulation (QAM); Enhanced coverage of fading channel mitigation methods such as channel estimate and diversity techniques; Fast-access comparison of all modulation schemes; New appendixes covering trigonometry identities, Fourier transform pairs and properties, and Q-function and error function values.

Download or read book OFDM and MC CDMA written by Lajos Hanzo and published by John Wiley & Sons. This book was released on 2007-01-11 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wireless communications has witnessed a tremendous growth during the past decade and further spectacular enabling technology advances are expected in an effort to render ubiquitous wireless connectivity a reality. Currently, a technical in-depth book on this subject is unavailable, which has a similar detailed exposure of OFDM, MIMO-OFDM and MC-CDMA. A further attraction of the joint treatment of these topics is that it allows the reader to view their design trade-offs in a comparative context. Divided into three main parts: Part I provides a detailed exposure of OFDM designed for employment in various applications Part II is another design alternative applicable in the context of OFDM systems where the channel quality fluctuations observed are averaged out with the aid of frequency-domain spreading codes, which leads to the concept of MC-CDMA Part III discusses how to employ multiple antennas at the base station for the sake of supporting multiple users in the uplink By providing an all-encompassing self-contained treatment this volume will appeal to a wide readership, as it is both an easy-reading textbook and a high-level research monograph.

Download or read book Advanced Antenna Systems for 5G Network Deployments written by Henrik Asplund and published by Academic Press. This book was released on 2020-06-24 with total page 747 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Antenna Systems for 5G Network Deployments: Bridging the Gap between Theory and Practice provides a comprehensive understanding of the field of advanced antenna systems (AAS) and how they can be deployed in 5G networks. The book gives a thorough understanding of the basic technology components, the state-of-the-art multi-antenna solutions, what support 3GPP has standardized together with the reasoning, AAS performance in real networks, and how AAS can be used to enhance network deployments. - Explains how AAS features impact network performance and how AAS can be effectively used in a 5G network, based on either NR and/or LTE - Shows what AAS configurations and features to use in different network deployment scenarios, focusing on mobile broadband, but also including fixed wireless access - Presents the latest developments in multi-antenna technologies, including Beamforming, MIMO and cell shaping, along with the potential of different technologies in a commercial network context - Provides a deep understanding of the differences between mid-band and mm-Wave solutions

Download or read book MIMO OFDM Wireless Communications with MATLAB written by Yong Soo Cho and published by John Wiley & Sons. This book was released on 2010-08-20 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: MIMO-OFDM is a key technology for next-generation cellular communications (3GPP-LTE, Mobile WiMAX, IMT-Advanced) as well as wireless LAN (IEEE 802.11a, IEEE 802.11n), wireless PAN (MB-OFDM), and broadcasting (DAB, DVB, DMB). In MIMO-OFDM Wireless Communications with MATLAB®, the authors provide a comprehensive introduction to the theory and practice of wireless channel modeling, OFDM, and MIMO, using MATLAB® programs to simulate the various techniques on MIMO-OFDM systems. One of the only books in the area dedicated to explaining simulation aspects Covers implementation to help cement the key concepts Uses materials that have been classroom-tested in numerous universities Provides the analytic solutions and practical examples with downloadable MATLAB® codes Simulation examples based on actual industry and research projects Presentation slides with key equations and figures for instructor use MIMO-OFDM Wireless Communications with MATLAB® is a key text for graduate students in wireless communications. Professionals and technicians in wireless communication fields, graduate students in signal processing, as well as senior undergraduates majoring in wireless communications will find this book a practical introduction to the MIMO-OFDM techniques. Instructor materials and MATLAB® code examples available for download at www.wiley.com/go/chomimo

Download or read book Broadband Wireless Communications written by Marco Luise and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: Broadband Wireless Access is a highly challenging and fast changing area of multimedia radio communications. These papers on the subject are the proceedings of the 9th Tyrrhenian Workshop, held in Lerici, Italy, September 1997. They provide a prospect on the state of the art and future development, with a sufficiently wide focus to cover technological, architectural and regulatory issues. Emphasis is given to those advances of digital signal processing techniques, microwave mono lithic integrated circuits and smart antennae that will allow the design of low cost user terminals with advanced capabilities. Specific attention is also devoted to the protocols these new terminals will use to access the radio medium, and to the kind of services that will eventually be provided to the end-user in the future. With contributions from worldwide experts, the material presented here is a timely and high-level overview of the field, and as well as being informative is a useful tool for promoting further investigation into the area of multimedia radio communications.