Download or read book Interfacing Defect Qubits with Nanophotonics in Silicon Carbide written by Gregory Richard William Calusine and published by . This book was released on 2014 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: Defect based qubit systems like the nitrogen vacancy center in diamond have recently emerged as promising candidates for quantum technologies due to their combination of long coherence times, room temperature operation, and robust optical interface. In order to realize many of their proposed applications, defect qubits must be incorporated into scalable devices architectures consisting of photonic, mechanical, or electrical degrees of freedom. Despite much recent progress, many challenges remain for diamond growth and device fabrication. As an alternate approach, we engaged in a search for nitrogen vacancy center analogues in alternative materials with the hope of obtaining a greater degree of control over defect and material properties. Ultimately, we discovered that divacancy-related point defects in all three of the most common forms of silicon carbide- termed 4H, 6H, and 3C- act as analogues to the nitrogen vacancy center in diamond. We chose to focus our research primarily on defects in 3C silicon carbide (termed 'Ky5' defects) because of its availability as a single crystal heteroepitaxial thin film grown on silicon, an advantage that greatly facilitates the fabrication of functional devices. We characterized the spin and optical properties of Ky5 defects in thin film geometries and observed many similarities to the nitrogen vacancy center. We performed the first measurements of spin dynamics in 3C silicon carbide and demonstrate coherent control of defect spins up to room temperature and observe coherence times of up to 22 microseconds.

Download or read book Nanophotonic Integration and Engineering of Defect Qubits in Diamond written by Srivatsa Chakravarthi and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid-state defect qubits are emerging as a promising candidate for quantum information processing. A fundamental resource for quantum information is entanglement between distant qubit nodes. Several quantum platforms have demonstrated entanglement generation between two physically separated qubits. However, a scalable platform to efficiently entangle multiple qubits remains elusive. Optically addressable defect qubits in diamond such as the nitrogen-vacancy (NV) and the silicon-vacancy (SiV) centers serve as the foundation of this thesis. The crucial components of optically interfaced defect qubit platforms are high-fidelity initialization, manipulation and readout of the qubit spin state accomplished using photoluminescence on an optical cycling transition. Here, we demonstrate significant steps towards realizing these components with a gallium phosphide (GaP) on diamond hybrid photonic platform. Utilizing individual defect qubits created by targeted defect formation process, experimental results on various defect-photonic coupling geometries are presented. Enhanced photon collection efficiency is measured for implanted NV centers coupled to disk-resonators and inverse-designed photon extraction devices. One of the main challenges encountered with coupled NV devices is the significant spectral instability. By performing large-scale automated resonant spectroscopy on the implanted NV centers, we determine that defect-surface interaction are the dominant source of the observed spectral instability. This leads us to consider the SiV center in diamond, which exhibits inherent protection from electric field fluctuations arising by its inversion symmetry within the diamond lattice. We demonstrate coupling of SiV centers to 1-D photonic crystal cavities (PhC) fabricated in GaP. To avoid perturbation of the diamond surface, we fabricate the PhCs on a separate chip and integrate with SiV centers in diamond by a stamp-transfer technique. Ancillary components for a single chip architecture such as single photon detectors, coherent frequency-conversion and passive photonics utilizing GaP are also demonstrated. These results establish GaP-on-diamond as a suitable platform for efficiently interfacing defects qubits with nanophotonic devices for scalable entanglement generation.

Download or read book Advances in Atomic Molecular and Optical Physics written by and published by Academic Press. This book was released on 2017-06-07 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Atomic, Molecular, and Optical Physics, Volume 66 provides a comprehensive compilation of recent developments in a field that is in a state of rapid growth. New to this volume are chapters devoted to 2D Coherent Spectroscopy of Electronic Transitions, Nonlinear and Quantum Optical Properties and Applications of Intense Twin-Beams, Non-classical Light Generation from III-V and Group-IV Solid-State Cavity Quantum Systems, Trapping Atoms with Radio Frequency Adiabatic Potentials, Quantum Control of Optomechanical Systems, and Efficient Description of Bose–Einstein Condensates in Time-Dependent Rotating Traps. With timely articles written by distinguished experts that contain relevant review materials and detailed descriptions of important developments in the field, this series is a must have for those interested in the variety of topics covered. Presents the work of international experts in the field Contains comprehensive articles that compile recent developments in a field that is experiencing rapid growth, with new experimental and theoretical techniques emerging Ideal for users interested in optics, excitons, plasmas, and thermodynamics Topics covered include atmospheric science, astrophysics, surface physics, and laser physics, amongst others

Download or read book Femtosecond Laser Micromachining written by Roberto Osellame and published by Springer Science & Business Media. This book was released on 2012-03-05 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Femtosecond laser micromachining of transparent material is a powerful and versatile technology. In fact, it can be applied to several materials. It is a maskless technology that allows rapid device prototyping, has intrinsic three-dimensional capabilities and can produce both photonic and microfluidic devices. For these reasons it is ideally suited for the fabrication of complex microsystems with unprecedented functionalities. The book is mainly focused on micromachining of transparent materials which, due to the nonlinear absorption mechanism of ultrashort pulses, allows unique three-dimensional capabilities and can be exploited for the fabrication of complex microsystems with unprecedented functionalities.This book presents an overview of the state of the art of this rapidly emerging topic with contributions from leading experts in the field, ranging from principles of nonlinear material modification to fabrication techniques and applications to photonics and optofluidics.

Download or read book Quantum Photonics Pioneering Advances and Emerging Applications written by Robert W. Boyd and published by Springer. This book was released on 2019-02-27 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together reviews by internationally renowed experts on quantum optics and photonics. It describes novel experiments at the limit of single photons, and presents advances in this emerging research area. It also includes reprints and historical descriptions of some of the first pioneering experiments at a single-photon level and nonlinear optics, performed before the inception of lasers and modern light detectors, often with the human eye serving as a single-photon detector. The book comprises 19 chapters, 10 of which describe modern quantum photonics results, including single-photon sources, direct measurement of the photon's spatial wave function, nonlinear interactions and non-classical light, nanophotonics for room-temperature single-photon sources, time-multiplexed methods for optical quantum information processing, the role of photon statistics in visual perception, light-by-light coherent control using metamaterials, nonlinear nanoplasmonics, nonlinear polarization optics, and ultrafast nonlinear optics in the mid-infrared.

Download or read book Quantum Computing written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2019-04-27 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quantum mechanics, the subfield of physics that describes the behavior of very small (quantum) particles, provides the basis for a new paradigm of computing. First proposed in the 1980s as a way to improve computational modeling of quantum systems, the field of quantum computing has recently garnered significant attention due to progress in building small-scale devices. However, significant technical advances will be required before a large-scale, practical quantum computer can be achieved. Quantum Computing: Progress and Prospects provides an introduction to the field, including the unique characteristics and constraints of the technology, and assesses the feasibility and implications of creating a functional quantum computer capable of addressing real-world problems. This report considers hardware and software requirements, quantum algorithms, drivers of advances in quantum computing and quantum devices, benchmarks associated with relevant use cases, the time and resources required, and how to assess the probability of success.

Download or read book Fluorescent Nanodiamonds written by Huan-Cheng Chang and published by John Wiley & Sons. This book was released on 2018-11-12 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: The most comprehensive reference on fluorescent nanodiamond physical and chemical properties and contemporary applications Fluorescent nanodiamonds (FNDs) have drawn a great deal of attention over the past several years, and their applications and development potential are proving to be manifold and vast. The first and only book of its kind, Fluorescent Nanodiamonds is a comprehensive guide to the basic science and technical information needed to fully understand the fundamentals of FNDs and their potential applications across an array of domains. In demonstrating the importance of FNDs in biological applications, the authors bring together all relevant chemistry, physics, materials science and biology. Nanodiamonds are produced by powerful cataclysmic events such as explosions, volcanic eruptions and meteorite impacts. They also can be created in the lab by high-pressure high-temperature treatment of graphite or detonating an explosive in a reactor vessel. A single imperfection can give a nanodiamond a specific, isolated color center which allows it to function as a single, trapped atom. Much smaller than the thickness of a human hair, a nanodiamond can have a huge surface area that allows it to bond with a variety of other materials. Because of their non-toxicity, nanodiamonds may be useful in biomedical applications, such as drug delivery and gene therapy. The most comprehensive reference on a topic of rapidly increasing interest among academic and industrial researchers across an array of fields Includes numerous case studies and practical examples from many areas of research and industrial applications, as well as fascinating and instructive historical perspectives Each chapter addresses, in-depth, a single integral topic including the fundamental properties, synthesis, mechanisms and functionalisation of FNDs The first book published by the key patent holder with his research group in the field of FNDs Fluorescent Nanodiamonds is an important working resource for a broad range of scientists and engineers in industry and academia. It will also be a welcome reference for instructors in chemistry, physics, materials science, biology and related fields.

Download or read book Advanced Silicon Carbide Devices and Processing written by Stephen Saddow and published by BoD – Books on Demand. This book was released on 2015-09-17 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the production of the first commercially available blue LED in the late 1980s, silicon carbide technology has grown into a billion-dollar industry world-wide in the area of solid-state lighting and power electronics. With this in mind we organized this book to bring to the attention of those well versed in SiC technology some new developments in the field with a particular emphasis on particularly promising technologies such as SiC-based solar cells and optoelectronics. We have balanced this with the more traditional subjects such as power electronics and some new developments in the improvement of the MOS system for SiC MOSFETS. Given the importance of advanced microsystems and sensors based on SiC, we also included a review on 3C-SiC for both microsystem and electronic applications.

Download or read book Molecular Nanomagnets written by Dante Gatteschi and published by OUP Oxford. This book was released on 2011-04-14 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanomagnetism is a rapidly expanding area of research which appears to be able to provide novel applications. Magnetic molecules are at the very bottom of the possible size of nanomagnets and they provide a unique opportunity to observe the coexistence of classical and quantum properties. The discovery in the early 90's that a cluster comprising twelve manganese ions shows hysteresis of molecular origin, and later proved evidence of quantum effects, opened a new research area which is still flourishing through the collaboration of chemists and physicists. This book is the first attempt to cover in detail the new area of molecular nanomagnetism, for which no other book is available. In fact research and review articles, and book chapters are the only tools available for newcomers and the experts in the field. It is written by the chemists originators and by a theorist who has been one of the protagonists of the development of the field, and is explicitly addressed to an audience of chemists and physicists, aiming to use a language suitable for the two communities.

Download or read book Experimental Aspects of Quantum Computing written by Henry O. Everitt and published by Springer Science & Business Media. This book was released on 2007-04-03 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical quantum computing still seems more than a decade away, and researchers have not even identified what the best physical implementation of a quantum bit will be. There is a real need in the scientific literature for a dialogue on the topic of lessons learned and looming roadblocks. This reprint from Quantum Information Processing is dedicated to the experimental aspects of quantum computing and includes articles that 1) highlight the lessons learned over the last 10 years, and 2) outline the challenges over the next 10 years. The special issue includes a series of invited articles that discuss the most promising physical implementations of quantum computing. The invited articles were to draw grand conclusions about the past and speculate about the future, not just report results from the present.

Download or read book Quantum Confined Excitons in 2 Dimensional Materials written by Carmen Palacios-Berraquero and published by Springer. This book was released on 2018-11-02 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the first established experimental results of an emergent field: 2-dimensional materials as platforms for quantum technologies, specifically through the optics of quantum-confined excitons. It also provides an extensive review of the literature from a number of disciplines that informed the research, and introduces the materials of focus – 2d Transition Metal Dichalcogenides (2d-TMDs) – in detail, discussing electronic and chemical structure, excitonic behaviour and response to strain. This is followed by a brief overview of quantum information technologies, including concepts such as single-photon sources and quantum networks. The methods chapter addresses quantum optics techniques and 2d-material processing, while the results section shows the development of a method to deterministically create quantum dots (QDs) in the 2d-TMDs, which can trap single-excitons; the fabrication of atomically thin quantum light-emitting diodes to induce all-electrical single-photon emission from the QDs, and lastly, the use of devices to controllably trap single-spins in the QDs –the first step towards their use as optically-addressable matter qubits.

Download or read book Oxide Electronics written by Asim K. Ray and published by John Wiley & Sons. This book was released on 2021-04-12 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oxide Electronics Multiple disciplines converge in this insightful exploration of complex metal oxides and their functions and properties Oxide Electronics delivers a broad and comprehensive exploration of complex metal oxides designed to meet the multidisciplinary needs of electrical and electronic engineers, physicists, and material scientists. The distinguished author eschews complex mathematics whenever possible and focuses on the physical and functional properties of metal oxides in each chapter. Each of the sixteen chapters featured within the book begins with an abstract and an introduction to the topic, clear explanations are presented with graphical illustrations and relevant equations throughout the book. Numerous supporting references are included, and each chapter is self-contained, making them perfect for use both as a reference and as study material. Readers will learn how and why the field of oxide electronics is a key area of research and exploitation in materials science, electrical engineering, and semiconductor physics. The book encompasses every application area where the functional and electronic properties of various genres of oxides are exploited. Readers will also learn from topics like: Thorough discussions of High-k gate oxide for silicon heterostructure MOSFET devices and semiconductor-dielectric interfaces An exploration of printable high-mobility transparent amorphous oxide semiconductors Treatments of graphene oxide electronics, magnetic oxides, ferroelectric oxides, and materials for spin electronics Examinations of the calcium aluminate binary compound, perovoksites for photovoltaics, and oxide 2Degs Analyses of various applications for oxide electronics, including data storage, microprocessors, biomedical devices, LCDs, photovoltaic cells, TFTs, and sensors Suitable for researchers in semiconductor technology or working in materials science, electrical engineering, and physics, Oxide Electronics will also earn a place in the libraries of private industry researchers like device engineers working on electronic applications of oxide electronics. Engineers working on photovoltaics, sensors, or consumer electronics will also benefit from this book.

Download or read book Self Assembled Quantum Dots written by Zhiming M Wang and published by Springer Science & Business Media. This book was released on 2007-11-29 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: This multidisciplinary book provides up-to-date coverage of carrier and spin dynamics and energy transfer and structural interaction among nanostructures. Coverage also includes current device applications such as quantum dot lasers and detectors, as well as future applications to quantum information processing. The book will serve as a reference for anyone working with or planning to work with quantum dots.

Download or read book 2D Monoelemental Materials Xenes and Related Technologies written by Zongyu Huang and published by CRC Press. This book was released on 2022-04-19 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: Monoelemental 2D materials called Xenes have a graphene-like structure, intra-layer covalent bond, and weak van der Waals forces between layers. Materials composed of different groups of elements have different structures and rich properties, making Xenes materials a potential candidate for the next generation of 2D materials. 2D Monoelemental Materials (Xenes) and Related Technologies: Beyond Graphene describes the structure, properties, and applications of Xenes by classification and section. The first section covers the structure and classification of single-element 2D materials, according to the different main groups of monoelemental materials of different components and includes the properties and applications with detailed description. The second section discusses the structure, properties, and applications of advanced 2D Xenes materials, which are composed of heterogeneous structures, produced by defects, and regulated by the field. Features include: Systematically detailed single element materials according to the main groups of the constituent elements Classification of the most effective and widely studied 2D Xenes materials Expounding upon changes in properties and improvements in applications by different regulation mechanisms Discussion of the significance of 2D single-element materials where structural characteristics are closely combined with different preparation methods and the relevant theoretical properties complement each other with practical applications Aimed at researchers and advanced students in materials science and engineering, this book offers a broad view of current knowledge in the emerging and promising field of 2D monoelemental materials.

Download or read book Symmetry and Spectroscopy written by Daniel C. Harris and published by Courier Corporation. This book was released on 1989-01-01 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Informal, effective undergraduate-level text introduces vibrational and electronic spectroscopy, presenting applications of group theory to the interpretation of UV, visible, and infrared spectra without assuming a high level of background knowledge. 200 problems with solutions. Numerous illustrations. "A uniform and consistent treatment of the subject matter." — Journal of Chemical Education.

Download or read book Cavity Optomechanics written by Markus Aspelmeyer and published by Springer. This book was released on 2014-07-05 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last few years cavity-optomechanics has emerged as a new field of research. This highly interdisciplinary field studies the interaction between micro and nano mechanical systems and light. Possible applications range from novel high-bandwidth mechanical sensing devices through the generation of squeezed optical or mechanical states to even tests of quantum theory itself. This is one of the first books in this relatively young field. It is aimed at scientists, engineers and students who want to obtain a concise introduction to the state of the art in the field of cavity optomechanics. It is valuable to researchers in nano science, quantum optics, quantum information, gravitational wave detection and other cutting edge fields. Possible applications include biological sensing, frequency comb applications, silicon photonics etc. The technical content will be accessible to those who have familiarity with basic undergraduate physics.

Download or read book Digital Think written by Nora Paul and published by QOOP, Inc.. This book was released on 2005-11 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: