Download or read book Interfacial Stability of Silicon Carbide Coated Boron Filament Reinforced Metals written by M. Basche and published by . This book was released on 1969 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt: The degradation of boron filament reinforced aluminum composites at temperatures over 400 C severely limits this material to relatively low-temperature applications. In order to extend the elevated temperature usefulness of such composites boron filament was coated with a diffusion and oxidation inhibiting coating of ?-silicon carbide. The coating was applied by thermally decomposing a halogenated silane compound on the surface of previously prepared boron filaments. Electron microprobe analysis showed that the boron had diffused part way through the silicon carbide layer during the deposition process at approximately 1200 C. The ultimate tensile strengths of the coated fibers, however, were found to be approximately the same as the uncoated fibers, namely, 450,000 to 550,000 psi.
Download or read book Interfacial Properties of Silicon Carbide Fiber Reinforced Reaction formed Silicon Carbide Matrix Composites written by Paula Jeanne Holmes and published by . This book was released on 1995 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Evaluation of Interfacial Properties in Silicon Carbide filament reinforced Glass Matrix Composites Using Pushout and Pullout Tests written by Jeffrey D. Bright and published by . This book was released on 1990 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Interface Control and Mechanical Property Improvements in Silicon Carbide titanium Composites written by William D. Brewer and published by . This book was released on 1982 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Investigation of diffusion barrier materials on silicon carbide filaments and their incorporation into metal matrix composites written by Steven Ray Nutt and published by . This book was released on 1982 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Interface Control and Mechnanical Property Improvements in Silicon Carbide titanium Composites written by William D. Brewer and published by . This book was released on 1982 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Interfacial Studies in Silicon Carbide Reinforced Aluminum Alloy Composites written by K. Kannikeswaran and published by . This book was released on 1986 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The interfacial characterization of discontinous silicon carbide and continuous graphite fiber reinforced aluminum composites written by Li-Jiuan Fu and published by . This book was released on 1983 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Effect of Interfaces in Metal Matrix Composites on Mechanical Properties written by Mark J. Klein and published by . This book was released on 1971 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: A study was made of the effect of the interface in aluminum (6061)/boron and aluminum (6061)/silicon carbide coated boron (Borsic) on selected mechanical properties. The object of the study was to determine the relationship of the interface condition to mechanical properties and to control interface effects so that composite properties can be optimized.
Download or read book Effects of Reaction Layer on Interfacial Shear Properties and Strength of Fiber in Silicon Carbide SiC Fiber Reinforced Titanium Alloy Composite written by C. Fujiwara and published by . This book was released on 1996 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt: The effect of the interfacial thickness of the reaction layer on the interfacial shear properties and the tensile strength of double carbon-coated SCS-6 SiC fiber in Ti-15Mo-5Zr-3Al alloy matrix composite was examined. The major reaction layer thickness, that is, titanium-carbide (TiC) layer thickness, varied with heat-exposure temperature and time, respectively, and the resultant mean thickness of the reaction layer of the composite ranged from 0.4 to 1.7 ?m. The critical interfacial toughness, Gic, and the mean shear sliding resistance, ?s were evaluated by the thin specimen pushout technique. Tensile strength of the silicon-carbide (SiC) fiber extracted from the titanium alloy matrix before and after the heat exposure was determined in relationship to the thickness of the reaction layer. The critical interface toughness, Gic, for the failure of the root of the reaction layer was ?4 J/m2, and the average shear sliding resistance of the interface, ?s, was 102 to 118 MPa. The interfacial shear mechanical properties were adequate to prevent failure of the fiber due to the stress concentration caused by cracks that formed first in the reaction layer. The results showed that when the growth of reaction layer was within 1.7 ?m, the mean strength of the extracted fiber was unaffected by the existence of the reaction layer because of weak bonding between it and the fiber. However, with the increase of the reaction layer thickness, the strength distribution of the extracted fiber tended to Weibull bimodal distribution.
Download or read book Interfacial Shear Stresses in Silicon Carbide and Sapphire Fiber reinforced Glasses written by Richard William Goettler and published by . This book was released on 1988 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Interfaces in Composites written by and published by ASTM International. This book was released on 1969 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Interfaces in Metal Matrix Composites written by Arthur G. Metcalfe and published by Elsevier. This book was released on 2016-06-15 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interfaces in Metal Matrix Composites, Volume 1 presents the position of the science of interfaces, as well as the necessary background for the effort in progress to apply these materials. The book discusses the mechanical and physical aspects of the interface; the effect of the interface on longitudinal tensile properties; and the effect of the filament-matrix interface on off-axis tensile strength. The text also describes the role of the interface on elastic-plastic composite behavior; the effect of interface on fracture; and the interfaces in oxide reinforced metals and in directionally solidified eutectics. The effect of impurity on reinforcement-matrix compatibility is also considered. Metallurgical engineers and people involved in the study of materials science will find the book invaluable.
Download or read book ASTM Special Technical Publication written by and published by . This book was released on 1969 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bibliography on Fibers and Composite Materials 1969 1972 written by J. N. Fleck and published by . This book was released on 1972 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: The bibliography contains over 3000 references, including translated items from Japan, West Germany, U.S.S.R., and other countries as well as references of original English language publications of the United States and United Kingdom. The references are categorized by specific fiber and matrix materials. In addition, many references are grouped in the general categories of compatibility studies, theory and design, testing and evaluation, application, and fabrication. A group of references to general review articles is included. The references represent the holdings of the former Defense Ceramic Information Center (DCIC) plus those of the Fibers and Composites Center (FCIC) at Battelle's Columbus Laboratories and MCIC. (Author).
Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1975 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Properties of Textile and Technical Fibres written by A. R. Bunsell and published by Woodhead Publishing. This book was released on 2018-01-02 with total page 1054 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Properties of Textile and Technical Fibres, Second Edition introduces tensile properties and failure and testing of fibers, also examining tensile properties and the failure of natural fibers, such as cotton, hemp, flax, agave, wool and silk. Next, the book discusses the tensile properties and failure of synthetic fibers, ranging from polyamide, polyester, polyethylene and carbon fibers. Chapters provide a general background of the fiber, including its manufacture, microstructure, factors that affect tensile properties and methods to improve tensile failure. With its distinguished editor and international contributors, this book is an important reference for fiber scientists, textile technologists, engineers and academics. Offers up-to-date coverage of new and advanced materials for the fiber and textile industries Reviews structure-property relationships of high-performance natural, synthetic polymer and inorganic fibers Offers a range of perspectives on the tensile properties of fibers from an international team of authors with diverse expertise in academic research and in textile development and manufacture
