Download or read book Surfaces and Interfaces II written by John Burke and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Army Materials and Mechanics Research Center has conducted the Sagamore Army Materials Research Conferences, in cooperation with the Metallurgical Research Laboratories of the Department of Chemical Engineering and Metallurgy of Syracuse University, since 1954. The purpose of the conferences has been to gather together scientists and engineers from academic institutions, industry, and government who are uniquely qualified to explore in depth a subject of importance to the Army, the Department of Defense and the scientific corr.munity. This volume, Surfaces and Interfaces ll: Physical and Mechanical Properties, can be considered a continuation, or perhaps an extension, of the information contained in Surfaces and Interfaces I: Chemical and Physical Characteristics. The emphasis in this volume is focused on: the technological significance of surfaces and interfaces; surface sensitive mechanical properties; environment-sensitive properties; control of grain structure; and composite materials. It is felt that the rather ambitious undertaking of the program committee to place the role of "surfaces and interfaces" in its proper context has been achieved. The balance between basic research findings and more applied research allows the reader a certain degree of latitude in the use of the two volumes. The continued active interest and support of these conferences by Col. C. T. Riordan, Commanding Officer, Dr. E. Scala, Technical Di rector, and J. F. Sullivan, Deputy Technical Director, of the Army Materials and Mechanics Research Center is appreciated.
Download or read book Science of Ceramic Interfaces II written by J. Nowotny and published by Newnes. This book was released on 1995-01-13 with total page 707 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection of papers arose from the Proceedings of the International Workshop on Interfaces of Ceramic Materials held in Australia, 1993 and is a continuation of the previous book published under the same title. The objective of the Workshop was to discuss research progress on the chemistry of ceramic interfaces and related industrial aspects. Due to the multidisciplinary character of ceramic interfaces the book contains articles covering several areas of expertise, including ceramics, surface science, solid state electrochemistry, metallurgy and high temperature chemistry. Some technical papers are also included in this volume. Scientists and engineers working in these areas, as well as students in materials science and engineering, will find this book of particular significance.
Download or read book Advanced Ceramic Coatings and Interfaces II Volume 28 Issue 3 written by Uwe Schulz and published by John Wiley & Sons. This book was released on 2007-11-16 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Papers from The American Ceramic Society's 31st International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 21-26, 2007. Focuses on recent advances in coating development, processing, structural design, microstructure and property characterization, and life prediction.
Download or read book Polymer Surfaces and Interfaces II written by W. J. Feast and published by John Wiley & Sons. This book was released on 1993-04-28 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: A collection of review papers which give an up-to-date interdisciplinary view of current technology and research on polymer surfaces. Contributors are drawn from both academia and industry, and represent a cross-section of subject interests.
Download or read book Fundamentals of Interface and Colloid Science written by J. Lyklema and published by Elsevier. This book was released on 2005-03-30 with total page 692 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume IV (2005) covers preparation, characterization of colloids, stability and interaction between pairs of particles, and in concentrated systems, their rheology and dynamics. This volume contains two chapters written, or co-authored by J. Lyklema and edited contributions by A.P.Philipse, H.P. van Leeuwen, M. Minor, A. Vrij, R.Tuinier and T. van Vliet. The volume is logically followed by Vol V, but is equally valuable as a stand alone reference. * Combined with part V, this volume completes the prestigious series Fundamentals of Interface and Colloid Science * Together with volume V this book provides a general physical chemical background to colloid science * Covers all aspects of particle colloids
Download or read book Fluid Mechanics at Interfaces 2 written by Roger Prudhomme and published by John Wiley & Sons. This book was released on 2022-03-04 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interfaces are present in most fluid mechanics problems. They not only denote phase separations and boundary conditions, but also thin flames and discontinuity waves. Fluid Mechanics at Interfaces 2 examines cases that involve one-dimensional or bi-dimensional manifolds, not only in gaseous and liquid physical states but also in subcritical fluids and in single- and multi-phase systems that may be pure or mixed. Chapter 1 addresses certain aspects of turbulence in discrete mechanics, briefly describing the physical model associated with discrete primal and dual geometric topologies before focusing on channel flow simulations at turbulence-inducing Reynolds numbers. Chapter 2 centers on atomization in an accelerating domain. In one case, an initial Kelvin–Helmholtz instability generates an acceleration field, in turn creating a Rayleigh–Taylor instability which ultimately determines the size of the droplets formed. Chapter 3 explores numerical studies of pipes with sudden contraction using OpenFOAM, and focuses on modeling that will be useful for engines and automobiles. Chapters 4 and 5 study the evaporation of droplets that are subject to high-frequency perturbations, a possible cause of instabilities in injection engines. The Heidmann model, which replaces the droplets in motion in a combustion chamber with a single continuously-fed droplet, is made more complex by considering the finite conduction heat transfer phenomenon. Finally, Chapter 6 is devoted to a study of the rotor blade surface of a Savonius wind turbine, considering both a non-stationary and a three-dimensional flow.
Download or read book Designing Social Interfaces written by Christian Crumlish and published by "O'Reilly Media, Inc.". This book was released on 2015-08-13 with total page 619 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents a set of design principles, patterns, and best practices that can be used to create user interfaces for new social websites or to improve existing social sites, along with advice for common challenges faced when designing social interfaces.
Download or read book Journal of the Chemical Society written by Chemical Society (Great Britain) and published by . This book was released on 1925 with total page 1772 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Titles of chemical papers in British and foreign journals" included in Quarterly journal, v. 1-12.
Download or read book Electrokinetics in Microfluidics written by Dongqing Li and published by Elsevier. This book was released on 2004-08-20 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: A lab-on-a-chip device is a microscale laboratory on a credit-card sized glass or plastic chip with a network of microchannels, electrodes, sensors and electronic circuits. These labs on a chip can duplicate the specialized functions as performed by their room-sized counterparts, such as clinical diagnoses, PCR and electrophoretic separation. The advantages of these labs on a chip include significant reduction in the amounts of samples and reagents, very short reaction and analysis time, high throughput and portability. Generally, a lab-on-a-chip device must perform a number of microfluidic functions: pumping, mixing, thermal cycling/incubating, dispensing, and separating. Precise manipulation of these microfluidic processes is key to the operation and performance of labs on a chip. The objective of this book is to provide a fundamental understanding of the interfacial electrokinetic phenomena in several key microfluidic processes, and to show how these phenomena can be utilised to control the microfluidic processes. For this purpose, this book emphasises the theoretical modelling and the numerical simulation of these electrokinetic phenomena in microfluidics. However, experimental studies of the electrokinetic microfluidic processes are also highlighted in sufficient detail. The first book which systematically reviews electrokinetic microfluidics processes for lab-on-a chip applications Covers modelling and numerical simulation of the electrokinetic microfluidics processes Providing information on experimental studies and details of experimental techniques, which are essential for those who are new to this field
Download or read book Proteins at Interfaces II written by and published by . This book was released on 1995 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Journal of the American Ceramic Society written by American Ceramic Society and published by . This book was released on 1927 with total page 1228 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Liquid Surfaces and Interfaces written by Peter S. Pershan and published by Cambridge University Press. This book was released on 2012-08-02 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical guide for graduate students and researchers on all aspects of x-ray scattering experiments on liquid surfaces and interfaces.
Download or read book Reactor Safety Study written by U.S. Nuclear Regulatory Commission and published by . This book was released on 1975 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Specimen Preparation for Transmission Electron Microscopy of Materials II written by Ron M. Anderson and published by . This book was released on 1990 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Third Earth Resources Technology Satellite 1 Symposium written by Stanley C. Freden and published by . This book was released on 1974 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Spacecraft Valve Technology Compilation Volume 2 Nonmechanical Controls written by and published by . This book was released on 1970 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computational Modelling of Free and Moving Boundary Problems II written by Luiz C. Wrobel and published by . This book was released on 1993 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt:
