Download or read book Assessment of the Performance of Engineered Waste Containment Barriers written by National Research Council and published by National Academies Press. This book was released on 2007-09-22 with total page 135 pages. Available in PDF, EPUB and Kindle. Book excerpt: President Carter's 1980 declaration of a state of emergency at Love Canal, New York, recognized that residents' health had been affected by nearby chemical waste sites. The Resource Conservation and Recovery Act, enacted in 1976, ushered in a new era of waste management disposal designed to protect the public from harm. It required that modern waste containment systems use "engineered" barriers designed to isolate hazardous and toxic wastes and prevent them from seeping into the environment. These containment systems are now employed at thousands of waste sites around the United States, and their effectiveness must be continually monitored. Assessment of the Performance of Engineered Waste Containment Barriers assesses the performance of waste containment barriers to date. Existing data suggest that waste containment systems with liners and covers, when constructed and maintained in accordance with current regulations, are performing well thus far. However, they have not been in existence long enough to assess long-term (postclosure) performance, which may extend for hundreds of years. The book makes recommendations on how to improve future assessments and increase confidence in predictions of barrier system performance which will be of interest to policy makers, environmental interest groups, industrial waste producers, and industrial waste management industry.

Download or read book Clay Polymer Nanocomposites written by Khouloud Jlassi and published by Elsevier. This book was released on 2017-07-26 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clay–Polymer Nanocomposites is a complete summary of the existing knowledge on this topic, from the basic concepts of synthesis and design to their applications in timely topics such as high-performance composites, environment, and energy issues. This book covers many aspects of synthesis such as in- situ polymerization within the interlamellar spacing of the clays or by reaction of pristine or pre-modified clays with reactive polymers and prepolymers. Indeed, nanocomposites can be prepared at industrial scale by melt mixing. Regardless the synthesis method, much is said in this book about the importance of theclay pre-modification step, which is demonstrated to be effective, on many occasions, in obtaining exfoliated nanocomposites. Clay–Polymer Nanocomposites reports the background to numerous characterization methods including solid state NMR, neutron scattering, diffraction and vibrational techniques as well as surface analytical methods, namely XPS, inverse gas chromatography and nitrogen adsorption to probe surface composition, wetting and textural/structural properties. Although not described in dedicated chapters, numerous X-ray diffraction patterns of clay–polymer nanocomposites and reference materials are displayed to account for the effects of intercalation and exfoliations of layered aluminosilicates. Finally, multiscale molecular simulation protocols are presenting for predicting morphologies and properties of nanostructured polymer systems with industrial relevance. As far as applications are concerned, Clay–Polymer Nanocomposites examines structural composites such as clay–epoxy and clay–biopolymers, the use of clay–polymer nanocomposites as reactive nanocomposite fillers, catalytic clay-(conductive) polymers and similar nanocomposites for the uptake of hazardous compounds or for controlled drug release, antibacterial applications, energy storage, and more. - The most comprehensive coverage of the state of the art in clay–polymer nanocomposites, from synthesis and design to opportunities and applications - Covers the various methods of characterization of clay–polymer nanocomposites - including spectroscopy, thermal analyses, and X-ray diffraction - Includes a discussion of a range of application areas, including biomedicine, energy storage, biofouling resistance, and more

Download or read book Geoenvironmental Engineering written by Raymond N. Yong and published by CRC Press. This book was released on 2000-09-25 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Why do some contaminants remain in soils indefinitely? How much of a threat do they pose to human health or the environment? The need for effective and economic site decontamination arises daily. Geoenvironmental Engineering: Contaminated Soils, Pollutant Fate, and Mitigation discusses why soils remain contaminated, focusing on the development of the factors, properties, characteristics, and parameters of soils and individual contaminants. Subjects covered include the basic properties of soils affecting accumulation of contaminants, long-term retention of contaminants and their fate, including the development of intermediate products. The author emphasizes the factors, interactions, and mechanisms important in the bonding and partitioning process. He provides the groundwork for determining the fate of pollutants in soils and sediments and their mitigation. Geoenvironmental Engineering: Contaminated Soils, Pollutant Fate, and Mitigation focuses on why soils and sediments remain contaminated, not how they became contaminated in the first place. You will understand why specific contaminants remain in soils and sediments, how much of a threat they pose to human health and the environment, and what steps to take for mitigation. With this information you can determine the extent of the contamination of soils and sediments, how long they will remain a threat, and what methods to use for their remediation.

Download or read book Multicomponent Polymeric Materials written by Jin Kuk Kim and published by Springer. This book was released on 2016-08-26 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book offers an in-depth review of the materials design and manufacturing processes employed in the development of multi-component or multiphase polymer material systems. This field has seen rapid growth in both academic and industrial research, as multiphase materials are increasingly replacing traditional single-component materials in commercial applications. Many obstacles can be overcome by processing and using multiphase materials in automobile, construction, aerospace, food processing, and other chemical industry applications. The comprehensive description of the processing, characterization, and application of multiphase materials presented in this book offers a world of new ideas and potential technological advantages for academics, researchers, students, and industrial manufacturers from diverse fields including rubber engineering, polymer chemistry, materials processing and chemical science. From the commercial point of view it will be of great value to those involved in processing, optimizing and manufacturing new materials for novel end-use applications. The book takes a detailed approach to the description of process parameters, process optimization, mold design, and other core manufacturing information. Details of injection, extrusion, and compression molding processes have been provided based on the most recent advances in the field. Over two comprehensive sections the book covers the entire field of multiphase polymer materials, from a detailed description of material design and processing to the cutting-edge applications of such multiphase materials. It provides both precise guidelines and general concepts for the present and future leaders in academic and industrial sectors.

Download or read book Advances in Environmental Geotechnics written by Yunmin Chen and published by Springer Science & Business Media. This book was released on 2011-02-04 with total page 944 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Advances in Environmental Geotechnics" presents the latest developments in this interdisciplinary field. The topics covered include basic and advanced theories for modeling of geoenvironmental phenomena, testing and monitoring for geoenvironmental engineering, municipal solid wastes and landfill engineering, sludge and dredged soils, geotechnical reuse of industrial wastes, contaminated land and remediation technology, applications of geosynthetics in geoenvironmental engineering, geoenvironmental risk assessment, management and sustainability, ecological techniques and case histories. This proceedings includes papers authored by core members of ISSMGE TC5 (International Society of Soil Mechanics and Geotechnical Engineering---Environmental Geotechnics) and geoenvironmental researchers from more than 20 countries and regions. It is a valuable reference for geoenvironmental and geotechnical engineers as well as civil engineers. Yunmin Chen, Xiaowu Tang, and Liangtong Zhan are Professors at the Department of Civil Engineering of Zhejiang University, China.

Download or read book Engineering and Design written by Us Army Corps Of Engineers and published by Military Bookshop. This book was released on 2002-06-01 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual provides practical guidance for the design and operation of soil vapor extraction (SVE) and bioventing (BV) systems. It is intended for use by engineers, geologists, hydrogeologists, and soil scientists, chemists, project managers, and others who possess a technical education and some design experience but only the broadest familiarity with SVE or BV systems.

Download or read book Infrared Spectroscopy in Conservation Science written by Michele R. Derrick and published by Getty Publications. This book was released on 2000-03-16 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides practical information on the use of infrared (IR) spectroscopy for the analysis of materials found in cultural objects. Designed for scientists and students in the fields of archaeology, art conservation, microscopy, forensics, chemistry, and optics, the book discusses techniques for examining the microscopic amounts of complex, aged components in objects such as paintings, sculptures, and archaeological fragments. Chapters include the history of infrared spectroscopy, the basic parameters of infrared absorption theory, IR instrumentation, analysis methods, sample collection and preparation, and spectra interpretation. The authors cite several case studies, such as examinations of Chumash Indian paints and the Dead Sea Scrolls. The Institute’s Tools for Conservation series provides practical scientific procedures and methodologies for the practice of conservation. The series is specifically directed to conservation scientists, conservators, and technical experts in related fields.

Download or read book Government Reports Announcements Index written by and published by . This book was released on 1994-03 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Permeable Barriers for Groundwater Remediation written by Arun R. Gavaskar and published by . This book was released on 1998 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of the limitations of conventional pump-and-treat systems in treating groundwater contaminants, permeable barriers are potentially more cost-effective than pump-and-treat systems for treating dissolved chlorinated solvent plumes, which may persist in the saturated zone for several decades. Other contaminants, such as chromium or other soluble heavy metals, can also be treated with this technology. Permeable Barriers for Groundwater Remediation discusses the types of permeable barriers, their design and construction, and how they can be monitored to evaluate compliance. It provides practical guidance on reactive media selection, treatability testing, hydrogeologic and geochemical modeling, and innovative installation techniques for the evaluation and application of this promising new technology. The types of permeable barriers discussed include: trench-type and caisson-based reactive cells; innovative emplacements, such as horizontal trenching and jetting; and continuous reactive barriers versus funnel-and-gate systems.

Download or read book Clay Geosynthetic Barriers written by H. Zanzinger and published by CRC Press. This book was released on 2022-01-27 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clay geosynthetic barriers are most frequently used in environmental areas, such as landfill cover systems. This work discusses the durability and lifetime aspects of clay geosynthetic barriers related to the synthetic yarns and fibres.

Download or read book Contaminants in the Subsurface written by National Research Council and published by National Academies Press. This book was released on 2005-04-23 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: At hundreds of thousands of commercial, industrial, and military sites across the country, subsurface materials including groundwater are contaminated with chemical waste. The last decade has seen growing interest in using aggressive source remediation technologies to remove contaminants from the subsurface, but there is limited understanding of (1) the effectiveness of these technologies and (2) the overall effect of mass removal on groundwater quality. This report reviews the suite of technologies available for source remediation and their ability to reach a variety of cleanup goals, from meeting regulatory standards for groundwater to reducing costs. The report proposes elements of a protocol for accomplishing source remediation that should enable project managers to decide whether and how to pursue source remediation at their sites.

Download or read book Nano and Bio Based Technologies for Wastewater Treatment written by Elvis Fosso-Kankeu and published by John Wiley & Sons. This book was released on 2019-05-21 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents recent challenges related to new forms of pollution from industries and discusses adequate state-of-the-art technologies capable to remediate such forms of pollution. Over the past few decades the boom in the industrial sector has contributed to the release in the environment of pollutants that have no regulatory status and which may have significant impact on the health of humans and animals. These pollutants also referred to as "emerging pollutants", are mostly aromatic compounds which derive from excretion of pharmaceutical, industrial effluents and municipal discharge. It is recurrent these days to find water treatment plants which no longer produce water that fits the purpose of domestic consumption based on newly established guidelines. This situation has prompted water authorities and researchers to develop tools for proper prediction and control of the dispersion of pollutants in the environment to ensure that appropriate measures are taken to prevent the occurrence of outbreaks due to sudden load of these pollutants in the water system. The chapters in this book cover a wide range of nano and bio-based techniques that have been designed for the real time detection of emerging contaminants in environmental water sources, geochemical models that are continuously improved for the prediction of inorganic contaminants migration from the mine solid wastes into ground and surface waters. Remediation strategies are also discussed and include effective techniques based on nanotechnology, advanced membrane filtration, oxidative and bio-degradation processes using various types of nanocatalysts, biocatalysts or supporting polymer matrices which are under advanced investigations for their implementation at large scale for the removal of recalcitrant pollutants from polluted water. Nano and Bio-Based Technologies for Wastewater Treatment: Prediction and Control Tools for the Dispersion of Pollutants in the Environment is divided is two sections. The first section covers the occurrence of emerging pollutants in environmental water while the second section covers state-of-the-art research on the removal of emerging pollutants from water using sustainable technologies. A total of 13 chapters addressing various topics related to the two sections are essentially based on recent developments in the respective field which could have a significant impact on the enhancement of the performance of wastewater treatment plants around the world, and especially in developing countries where access to clean and safe water remains a daily challenge.

Download or read book Natural Microporous Materials in Environmental Technology written by P. Misaelides and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the NATO Advanced Research Workshop on the Application of Natural Microporous Materials for Environmental Technology, Smolenice Castle, Slovakia, 26-30 October 1998

Download or read book Unsaturated Soil Mechanics in Engineering Practice written by Delwyn G. Fredlund and published by John Wiley & Sons. This book was released on 2012-07-30 with total page 946 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive guide to unsaturated soil— from the world's experts on the subject This book builds upon and substantially updates Fredlund and Rahardjo's publication, Soil Mechanics for Unsaturated Soils, the current standard in the field of unsaturated soils. It provides readers with more thorough coverage of the state of the art of unsaturated soil behavior and better reflects the manner in which practical unsaturated soil engineering problems are solved. Retaining the fundamental physics of unsaturated soil behavior presented in the earlier book, this new publication places greater emphasis on the importance of the "soil-water characteristic curve" in solving practical engineering problems, as well as the quantification of thermal and moisture boundary conditions based on the use of weather data. Topics covered include: Theory to Practice of Unsaturated Soil Mechanics Nature and Phase Properties of Unsaturated Soil State Variables for Unsaturated Soils Measurement and Estimation of State Variables Soil-Water Characteristic Curves for Unsaturated Soils Ground Surface Moisture Flux Boundary Conditions Theory of Water Flow through Unsaturated Soils Solving Saturated/Unsaturated Water Flow Problems Air Flow through Unsaturated Soils Heat Flow Analysis for Unsaturated Soils Shear Strength of Unsaturated Soils Shear Strength Applications in Plastic and Limit Equilibrium Stress-Deformation Analysis for Unsaturated Soils Solving Stress-Deformation Problems with Unsaturated Soils Compressibility and Pore Pressure Parameters Consolidation and Swelling Processes in Unsaturated Soils Unsaturated Soil Mechanics in Engineering Practice is essential reading for geotechnical engineers, civil engineers, and undergraduate- and graduate-level civil engineering students with a focus on soil mechanics.

Download or read book DNAPL Site Evaluation written by James W. Mercer and published by CRC-Press. This book was released on 1993-04-29 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: DNAPL Site Evaluation covers long-term contamination of ground water by DNAPL (dense non-aqueous phase liquids) chemicals. The book develops a framework for planning and implementing DNAPL site characterization activities. It provides detailed methods to identify, characterize, and monitor sites and analyzes their utility, limitations, risks, availability, and cost. Methods to interpret contaminant fate and transport are identified, and new site characterization methods are assessed. DNAPL Site Evaluation will maximize the cost-effectiveness of site investigation/remediation by providing the best information available to describe and evaluate methods to be used for determining the presence, fate, and transport of subsurface DNAPL contamination. The book will be a useful reference for groundwater professionals and environmental regulatory personnel.

Download or read book Geotechnical and Geoenvironmental Engineering Handbook written by R. Kerry Rowe and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1130 pages. Available in PDF, EPUB and Kindle. Book excerpt: Preface. Dedication. List of Figures. List of Tables. List of Contributors. Basic Behavior and Site Characterization. 1. Introduction; R.K. Rowe. 2. Basic Soil Mechanics; P.V. Lade. 3. Engineering Properties of Soils and Typical Correlations; P.V. Lade. 4. Site Characterization; D.E. Becker. 5. Unsaturated Soil Mechanics and Property Assessment; D.G. Fredlund, et al. 6. Basic Rocks Mechanics and Testing; K.Y. Lo, A.M. Hefny. 7. Geosynthetics: Characteristics and Testing; R.M. Koerner, Y.G. Hsuan. 8. Seepage, Drainage and Dewatering; R.W. Loughney. Foundations and Pavements. 9. Shallo.

Download or read book Geoenvironmental Engineering written by Lakshmi Reddi and published by CRC Press. This book was released on 2000-04-18 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applies science and engineering principles to the analysis, design, and implementation of technical schemes to characterize, treat, modify, and reuse/store waste and contaminated media. Includes site remediation.