Download or read book Interface Engineering of Natural Fibre Composites for Maximum Performance written by Nikolaos E Zafeiropoulos and published by Elsevier. This book was released on 2011-02-26 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the major reasons for composite failure is a breakdown of the bond between the reinforcement fibres and the matrix. When this happens, the composite loses strength and fails. By engineering the interface between the natural fibres and the matrix, the properties of the composite can be manipulated to give maximum performance. Interface engineering of natural fibre composites for maximum performance looks at natural (sustainable) fibre composites and the growing trend towards their use as reinforcements in composites.Part one focuses on processing and surface treatments to engineer the interface in natural fibre composites and looks in detail at modifying cellulose fibre surfaces in the manufacture of natural fibre composites, interface tuning through matrix modification and preparation of cellulose nanocomposites. It also looks at the characterisation of fibre surface treatments by infrared and raman spectroscopy and the effects of processing and surface treatment on the interfacial adhesion and mechanical properties of natural fibre composites. Testing interfacial properties in natural fibre composites is the topic of part two which discusses the electrochemical characterisation of the interfacial properties of natural fibres, assesses the mechanical and thermochemical properties and moisture uptake behaviour of natural fibres and studies the fatigue and delamination of natural fibre composites before finishing with a look at Raman spectroscopy and x-ray scattering for assessing the interface in natural fibre compositesWith its distinguished editor and international team of contributors Interface engineering of natural fibre composites for maximum performance is an invaluable resource to composite manufacturers and developers, materials scientists and engineers and anyone involved in designing and formulating composites or in industries that use natural fibre composites. - Examines characterisation of fibre surface treatments by infrared and raman spectroscopy and the effects of processing and surface treatment - Reviews testing interfacial properties in natural fibre composites including the electrochemical characterisation of the interfacial properties of natural fibres - Assesses the mechanical and thermochemical properties and moisture uptake behaviour of natural fibres and studies the fatigue and delamination of natural fibre composites

Download or read book Interface Engineering of Natural Fibre Composites for Maximum Performance written by Nikolaos E Zafeiropoulos and published by Woodhead Publishing. This book was released on 2016-08-19 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the major reasons for composite failure is a breakdown of the bond between the reinforcement fibres and the matrix. When this happens, the composite loses strength and fails. By engineering the interface between the natural fibres and the matrix, the properties of the composite can be manipulated to give maximum performance. Interface engineering of natural fibre composites for maximum performance looks at natural (sustainable) fibre composites and the growing trend towards their use as reinforcements in composites. Part one focuses on processing and surface treatments to engineer the interface in natural fibre composites and looks in detail at modifying cellulose fibre surfaces in the manufacture of natural fibre composites, interface tuning through matrix modification and preparation of cellulose nanocomposites. It also looks at the characterisation of fibre surface treatments by infrared and raman spectroscopy and the effects of processing and surface treatment on the interfacial adhesion and mechanical properties of natural fibre composites. Testing interfacial properties in natural fibre composites is the topic of part two which discusses the electrochemical characterisation of the interfacial properties of natural fibres, assesses the mechanical and thermochemical properties and moisture uptake behaviour of natural fibres and studies the fatigue and delamination of natural fibre composites before finishing with a look at Raman spectroscopy and x-ray scattering for assessing the interface in natural fibre composites With its distinguished editor and international team of contributors Interface engineering of natural fibre composites for maximum performance is an invaluable resource to composite manufacturers and developers, materials scientists and engineers and anyone involved in designing and formulating composites or in industries that use natural fibre composites.

Download or read book Properties and Performance of Natural Fibre Composites written by Kim Pickering and published by Elsevier. This book was released on 2008-06-23 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concern about global warming has led to renewed interest in the more sustainable use of natural fibres in composite materials. This important book reviews the wealth of recent research into improving the mechanical properties of natural-fibre thermoplastic composites so that they can be more widely used.The first part of the book provides an overview of the main types of natural fibres used in composites, how they are processed and, in particular, the way the fibre-matrix interface can be engineered to improve performance. Part two discusses the increasing use of natural-fibre composites in such areas as automotive and structural engineering, packaging and the energy sector. The final part of the book discusses ways of assessing the mechanical performance of natural-fibre composites.With its distinguished editor and team of contributors, Properties and performance of natural-fibre composites is a valuable reference for all those using these important materials in such areas as automotive and structural engineering. - Provides an overview of the types of natural fibres used in composites - Discusses fibre-matrix interface and how it can be engineered to improve performance - Examines the increasing use of natural-fibre composites in automotive and structural engineering and the packaging and energy sector

Download or read book Advanced High Strength Natural Fibre Composites in Construction written by Mizi Fan and published by Woodhead Publishing. This book was released on 2016-10-04 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced High Strength Natural Fibre Composites in Construction provides the basic framework and knowledge required for the efficient and sustainable use of natural fiber composites as a structural and building material, along with information on the ongoing efforts to improve the efficiency of use and competitiveness of these composites. Areas of particular interest include understanding the nature and behavior of raw materials and their functional contributions to the advanced architectures of high strength composites (Part 1), discussing both traditional and novel manufacturing technologies for various advanced natural fiber construction materials (Part 2), examining the parameters and performance of the composites (Part 3), and finally commenting on the associated codes, standards, and sustainable development of advanced high strength natural fiber composites for construction. This exposition will be based on well understood environmental science as it applies to construction (Part 4). The book is aimed at academics, research scholars, and engineers, and will serve as a most valuable text or reference book that challenges undergraduate and postgraduate students to think beyond standard practices when designing and creating novel construction materials. - Presents the first comprehensive review on the efficient and sustainable use of natural fiber composites in construction and building materials - Contains detailed information on the structure, chemical composition, and physical and mechanical properties of natural fibers - Covers both traditional and novel manufacturing technologies for high strength natural fiber composites - Includes material parameters and performance in use, as well as associated codes, standards, and applied case studies - Presents contributions from leading international experts in the field

Download or read book Cellulose Fibre Reinforced Composites written by R. Arun Ramnath and published by Woodhead Publishing. This book was released on 2022-10-29 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cellulose Fibre Reinforced Composites: Interface Engineering, Processing and Performance provides an up-to-date review of current research in cellulose fiber reinforced polymer composites. Key emphasis is placed on interface engineering, modern technologies needed for processing and materials performance in industrial applications. Novel techniques for interfacial adhesion, characterization and assessment of cellulose fiber reinforced composites are also discussed, along with current trends and future directions. With contributions from leading researchers in industry, academic, government and private research institutions from across the globe, the book will be an essential reference resource for all those working in the field of cellulose fibers and their composites. - Reviews advances in recent research towards enhancing the mechanical properties of cellulose fiber composites - Discusses interface engineering and modern technologies needed for processing cellulose fiber composites - Includes case studies of problems with interfaces and practical industrial applications

Download or read book Composite Reinforcements for Optimum Performance written by Philippe Boisse and published by Elsevier. This book was released on 2011-09-28 with total page 705 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reinforcements are an integral part of all composites and the quality and performance of the composite can be optimised by modelling the type and structure of the reinforcement before moulding. Composite reinforcements for optimum performance reviews the materials, properties and modelling techniques used in composite production and highlights their uses in optimising performance.Part one covers materials for reinforcements in composites, including chapters on fibres, carbon nanotubes and ceramics as reinforcement materials. In part two, different types of structures for reinforcements are discussed, with chapters covering woven and braided reinforcements, three-dimensional fibre structures and two methods of modelling the geometry of textile reinforcements: WiseTex and TexGen. Part three focuses on the properties of composite reinforcements, with chapters on topics such as in-plane shear properties, transverse compression, bending and permeability properties. Finally, part four covers characterising and modelling of reinforcements in composites, with chapters focusing on such topics as microscopic and mesoscopic approaches, X-ray tomography analysis and modelling reinforcement forming processes.With its distinguished editor and international team of contributors, Composite reinforcements for optimum performance is an essential reference for designers and engineers in the composite and composite reinforcement manufacturing industry, as well as all those with an academic research interest in the subject. - Reviews the materials, properties and modelling techniques used in composite production and highlights their uses in performance optimisation - Covers materials for reinforcements in composites, including fibres, carbon nanotubes and ceramics - Discusses characterising and modelling of reinforcements in composites, focusing on such topics as microscopic and mesoscopic approaches, X-ray tomography analysis and modelling reinforcement forming processes

Download or read book Natural Fibre Composites written by Alma THULE and published by Woodhead Publishing. This book was released on 2014-02-13 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of natural fibres as reinforcements in composites has grown in importance in recent years. Natural Fibre Composites summarises the wealth of significant recent research in this area. Chapters in part one introduce and explore the structure, properties, processing, and applications of natural fibre reinforcements, including those made from wood and cellulosic fibres. Part two describes and illustrates the processing of natural fibre composites. Chapters discuss ethical practices in the processing of green composites, manufacturing methods and compression and injection molding techniques for natural fibre composites, and thermoset matrix natural fibre-reinforced composites. Part three highlights and interprets the testing and properties of natural fibre composites including, non-destructive and high strain rate testing. The performance of natural fibre composites is examined under dynamic loading, the response of natural fibre composites to impact damage is appraised, and the response of natural fibre composites in a marine environment is assessed. Natural Fibre Composites is a technical guide for professionals requiring an understanding of natural fibre composite materials. It offers reviews, applications and evaluations of the subject for researchers and engineers. - Introduces and explores the structure, properties, processing, and applications of natural fibre reinforcements, including those made from wood and cellulosic fibres - Highlights and interprets the testing and properties of natural fibre composites, including non-destructive and high strain rate testing - Examines performance of natural fibre composites under dynamic loading, the response of natural fibre composites to impact damage, and the response of natural fibre composites in a marine environment

Download or read book Composite Joints and Connections written by P Camanho and published by Elsevier. This book was released on 2011-10-12 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growing use of composites over metals for structural applications has made a thorough understanding of the behaviour of composite joints in various applications essential for engineers, but has also presented them with a new set of problems. Composite joints and connections addresses these differences and explores the design, modelling and testing of bonded and bolted joints and connections.Part one discusses bolted joints whilst part two examines bonded joints. Chapters review reinforcement techniques and applications for composite bolted and bonded joints and investigate the causes and effects of fatigue and stress on both types of joint in various applications and environments. Topics in part one include metal hybridization, glass-reinforced aluminium (GLARE), hybrid fibre metal laminates (FML), glass fibre reinforced polymer (GFRP) and carbon fibre reinforced polymer (CFRP) composites. Topics in part two include calculation of strain energy release rates, simulating fracture and fatigue failure using cohesive zone models, marine and aerospace applications, advanced modelling, stress analysis of bonded patches and scarf repairs.Composite joints and connections is a valuable reference for composite manufacturers and composite component fabricators, the aerospace, automotive, shipbuilding and civil engineering industries and for anyone involved in the joining and repair of composite structures. - Explores the design, modelling and testing of bonded and bolted joints and connections - Reviews reinforcement techniques and applications for composite bolted and bonded joints - Investigates the causes and effects of fatigue and stress on bolted and bonded joints in various applications and environments

Download or read book Aging Effects on Natural Fiber Reinforced Polymer Composites written by Chandrasekar Muthukumar and published by Springer Nature. This book was released on 2022-01-31 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the topic of degradation phenomenon of natural fiber-based composites (NFC) under various aging conditions and proposes suitable solutions to improve the response of natural fiber-reinforced composite to aging conditions such as moisture, seawater, hygrothermal, and natural and accelerated weathering. The information provided by the book plays a vital role in the durability and shelf life of the composites as well as broadening the scope of outdoor application for natural fiber-based composites. The book will be appropriate for researchers and scientist who are interested in the application of natural fiber composites in various fields.

Download or read book Biocomposites Design and Mechanical Performance written by Manjusri Misra and published by Woodhead Publishing. This book was released on 2015-08-07 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biocomposites: Design and Mechanical Performance describes recent research on cost-effective ways to improve the mechanical toughness and durability of biocomposites, while also reducing their weight. Beginning with an introduction to commercially competitive natural fiber-based composites, chapters then move on to explore the mechanical properties of a wide range of biocomposite materials, including polylactic, polyethylene, polycarbonate, oil palm, natural fiber epoxy, polyhydroxyalkanoate, polyvinyl acetate, polyurethane, starch, flax, poly (propylene carbonate)-based biocomposites, and biocomposites from biodegradable polymer blends, natural fibers, and green plastics, giving the reader a deep understanding of the potential of these materials. - Describes recent research to improve the mechanical properties and performance of a wide range of biocomposite materials - Explores the mechanical properties of a wide range of biocomposite materials, including polylactic, polyethylene, polycarbonate, oil palm, natural fiber epoxy, polyhydroxyalkanoate, polyvinyl acetate, and polyurethane - Evaluates the potential of biocomposites as substitutes for petroleum-based plastics in industries such as packaging, electronic, automotive, aerospace and construction - Includes contributions from leading experts in this field

Download or read book Surface Treatment Methods of Natural Fibres and their Effects on Biocomposites written by Asim Shahzad and published by Woodhead Publishing. This book was released on 2022-03-25 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural fiber composites have experienced a renaissance over the last two decades as a response to societal demands for developing eco-friendly, biodegradable and recyclable materials. They are now being extensively used in everyday products as well as in automotive, packaging, sports and the construction industries. These fibers require surface treatments in order to improve their properties and interfacial bonding with polymer matrices, and to reduce their hydrophilic character. These methods can be grouped into three major categories: chemical, physical and biological. Chemical methods use chemical reagents to reduce fibers' hydrophilic tendency and thus improve compatibility with the matrix. They also expose more reactive groups on the fibre surface to facilitate efficient coupling with the matrix. Physical methods change structural and surface properties of the fiber and thereby influence the interfacial bonding with matrices, without extensively changing the chemical composition of the fibers. They are cleaner and simpler than the chemical methods. Biological methods use biological agents like fungi, enzymes and bacteria to modify the fiber surface properties. These methods are not toxic like chemical methods and are not energy-intensive like physical methods.Surface Treatment Methods of Natural Fibers and their Effects on Biocomposites presents an overview and recent developments of these methods. All the major methods are reviewed, explaining the science and methodology behind each method. The effects of these methods on various properties of fibers and the biocomposites made from these fibers are analyzed in detail.The book will be an essential reference for academic researchers, materials scientists and engineers, postgraduate students and industrial researchers and development scientists and engineers working on natural fibers and biocomposites. - Extensive coverage of all the surface modification methods (chemical, physical, biological) of natural fibers and its effect on properties of produced composites - The chemical mechanisms which are utilized in surface treatments are discussed in detail and how these affect the interfacial properties and characteristics - Systematic and comprehensive review on surface modifications of natural fibres, and explains how the effect of the surface treatment can be characterized and measured, as well as the effect on properties

Download or read book Advanced Composite Materials for Aerospace Engineering written by Sohel Rana and published by Woodhead Publishing. This book was released on 2016-04-26 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Composite Materials for Aerospace Engineering: Processing, Properties and Applications predominately focuses on the use of advanced composite materials in aerospace engineering. It discusses both the basic and advanced requirements of these materials for various applications in the aerospace sector, and includes discussions on all the main types of commercial composites that are reviewed and compared to those of metals. Various aspects, including the type of fibre, matrix, structure, properties, modeling, and testing are considered, as well as mechanical and structural behavior, along with recent developments. There are several new types of composite materials that have huge potential for various applications in the aerospace sector, including nanocomposites, multiscale and auxetic composites, and self-sensing and self-healing composites, each of which is discussed in detail. The book's main strength is its coverage of all aspects of the topics, including materials, design, processing, properties, modeling and applications for both existing commercial composites and those currently under research or development. Valuable case studies provide relevant examples of various product designs to enhance learning. - Contains contributions from leading experts in the field - Provides a comprehensive resource on the use of advanced composite materials in the aerospace industry - Discusses both existing commercial composite materials and those currently under research or development

Download or read book Biocomposites for High Performance Applications written by Dipa Ray and published by Woodhead Publishing. This book was released on 2017-05-15 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biocomposites for High-Performance Applications: Current Barriers and Future Needs Towards Industrial Development focuses on future research directions that will make biocomposites a successful player in the field of high-strength structural applications. With contributions from eminent academic researchers and industrial experts who have first-hand experience on the advantages/disadvantages of biocomposites in their daily lives, the book examines the industrial development of biocomposite products, identifying the current barriers and their future industrial needs Topics covered include: recent research activities from academia in the biocomposite research field, valuable thoughts and insights from biocomposite manufacturing industries, the strength and weaknesses of biocomposite products, and the practical issues that need to be addressed to reach the next level. - Highlights the practical issues involved in biocomposites research - Contains contributions from eminent academic researchers and industrial experts - Discusses recent research activities from academia in the biocomposite research field, along with valuable thoughts and insights from biocomposite manufacturing industries

Download or read book Polymer Modified Bitumen written by Tony McNally and published by Elsevier. This book was released on 2011-09-15 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: The addition of polymers to bitumen allows the modification of certain physical properties, such as softening point, brittleness and ductility, of the bitumen. Polymer modified bitumen: Properties and characterisation provides a valuable and in-depth coverage of the science and technology of polymer modified bitumen.After an initial introduction to bitumen and polymer modified bitumen, the book is divided into two parts. Chapters in part one focus on the preparation and properties of a range of polymer modified bitumen, including polymer bitumen emulsions, modification of bitumen with poly (urethanes), waste rubber and plastic and polypropylene fibres. Part two addresses the characterisation and properties of polymer modified bitumen. Chapter topics covered include rheology, simulated and actual long term ageing studies; the solubility of bituminous binders in fuels and the use of Fourier transform infrared spectroscopy to study ageing/oxidation of polymer modified bitumen.Polymer modified bitumen is an essential reference for scientists and engineers, from both academia and the civil engineering and transport industries, interested in the properties and characterisation of polymer modified bitumen. - Provides a comprehensive and in-depth coverage of the science and technology of polymer modified bitumen - Focuses on the preparation and properties of a range of polymer modified bitumen, including emulsions, modification of bitumen with poly(urethanes), waste rubber and plastic as well as polypropylene fibres - Addresses the characterization and properties of polymer modified bitumen, including rheology, simulated and actual long term ageing studies, and the solubility of bituminous binders in fuels

Download or read book Green Composites for Automotive Applications written by Georgios Koronis and published by Woodhead Publishing. This book was released on 2018-11-10 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Green Composites for Automotive Applications presents cutting-edge, comprehensive reviews on the industrial applications of green composites. The book provides an elaborative assessment of both academic and industrial research on eco-design, durability issues, environmental performance, and future trends. Particular emphasis is placed on the processing and characterization of green composites, specific types of materials, such as thermoset and thermoplastic, nanocomposites, sandwich, and polymer biofoams. Additional sections cover lifecycle and risk analysis. As such, this book is an essential reference resource for R&D specialists working in materials science, automotive, chemical, and environmental engineering, as well as R&D managers in industry. - Contains contributions from leading experts in the field - Covers experimental, analytical and numerical analysis - Deals with most important automotive aspects - Provides a special section dedicated to lifecycle assessment

Download or read book Annual Plant Sources of Fibres Nanocellulose and Cellulosic Derivatives written by Ramzi Khiari and published by Springer Nature. This book was released on 2023-07-01 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives an overview of the processing, properties, and applications of fibers and cellulose derivatives obtained from annual plant materials in the formation of non-wood source of pulp. The book comprises illustrations and tables summarizing the latest research on the production of fibers and cellulose derivatives using several key methods and/or characterization techniques. This book collates the information and knowledge of new ways to prepare cellulosic derivatives and describe the concepts and architecture of fibers obtained from annual plants. This book caters to researchers, policymakers, and industrial practitioners who are interested in natural fibers as a way to preserve the forest resource and to satisfy the increasing demand in pulps.

Download or read book Advances in Composites Manufacturing and Process Design written by Philippe Boisse and published by Woodhead Publishing. This book was released on 2015-07-29 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: The manufacturing processes of composite materials are numerous and often complex. Continuous research into the subject area has made it hugely relevant with new advances enriching our understanding and helping us overcome design and manufacturing challenges. Advances in Composites Manufacturing and Process Design provides comprehensive coverage of all processing techniques in the field with a strong emphasis on recent advances, modeling and simulation of the design process. Part One reviews the advances in composite manufacturing processes and includes detailed coverage of braiding, knitting, weaving, fibre placement, draping, machining and drilling, and 3D composite processes. There are also highly informative chapters on thermoplastic and ceramic composite manufacturing processes, and repairing composites. The mechanical behaviour of reinforcements and the numerical simulation of composite manufacturing processes are examined in Part Two. Chapters examine the properties and behaviour of textile reinforcements and resins. The final chapters of the book investigate finite element analysis of composite forming, numerical simulation of flow processes, pultrusion processes and modeling of chemical vapour infiltration processes. - Outlines the advances in the different methods of composite manufacturing processes - Provides extensive information on the thermo-mechanical behavior of reinforcements and composite prepregs - Reviews numerical simulations of forming and flow processes, as well as pultrusion processes and modeling chemical vapor infiltration