EBookClubs

Read Books & Download eBooks Full Online

EBookClubs

Read Books & Download eBooks Full Online

Book Interface engineered Ge MOSFETs for Future High Performance CMOS Applications

Download or read book Interface engineered Ge MOSFETs for Future High Performance CMOS Applications written by Duygu Kuzum and published by Stanford University. This book was released on 2009 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the semiconductor industry approaches the limits of traditional silicon CMOS scaling, introduction of performance boosters like novel materials and innovative device structures has become necessary for the future of CMOS. High mobility materials are being considered to replace Si in the channel to achieve higher drive currents and switching speeds. Ge has particularly become of great interest as a channel material, owing to its high bulk hole and electron mobilities. However, replacement of Si channel by Ge requires several critical issues to be addressed in Ge MOS technology. High quality gate dielectric for surface passivation, low parasitic source/drain resistance and performance improvement in Ge NMOS are among the major challenges in realizing Ge CMOS. Detailed characterization of gate dielectric/channel interface and a deeper understanding of mobility degradation mechanisms are needed to address the Ge NMOS performance problem and to improve PMOS performance. In the first part of this dissertation, the electrical characterization results on Ge NMOS and PMOS devices fabricated with GeON gate dielectric are presented. Carrier scattering mechanisms are studied through low temperature mobility measurements. For the first time, the effect of substrate crystallographic orientation on inversion electron and hole mobilities is investigated. Direct formation of a high-k dielectric on Ge has not given good results in the past. A good quality interface layer is required before the deposition of a high-K dielectric. In the second part of this dissertation, ozone-oxidation process is introduced to engineer Ge/insulator interface. Electrical and structural characterizations and stability analysis are carried out and high quality Ge/dielectric interface with low interface trap density is demonstrated. Detailed extraction of interface trap density distribution across the bandgap and close to band edges of Ge, using low temperature conductance and capacitance measurements is presented. Ge N-MOSFETs have exhibited poor drive currents and low mobility, as reported by several different research groups worldwide. In spite of the increasing interest in Ge, the major mechanisms behind poor Ge NMOS performance have not been completely understood yet. In the last part of this dissertation, the results on Ge NMOS devices fabricated with the ozone-oxidation and the low temperature source/drain activation processes are discussed. These devices achieve the highest electron mobility to-date, about 1.5 times the universal Si mobility. Detailed interface characterizations, trapping analyses and gated Hall device measurements are performed to identify the mechanisms behind poor Ge NMOS performance in the past.

Book Design and Process for Three dimensional Heterogeneous Integration

Download or read book Design and Process for Three dimensional Heterogeneous Integration written by Shulu Chen and published by Stanford University. This book was released on 2010 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the invention of the integrated circuit (IC) in the late 1950s, the semiconductor industry has experienced dramatic growth driven by both technology and manufacturing improvements. Over the past 40 years, the industry's growth trend has been predicted by Moore's law, and driven by the constant electrical field scaling design methodology. While the intrinsic performance of each device improves over generations, the corresponding interconnects do not. To alleviate this interconnect issue, a three-dimensional (3D) integration concept of transforming longer side to side interconnects into shorter vertical vias by using multiple active layers has attracted much attention. The focus of this thesis is on providing the foundation for 3D heterogeneous integration by investigating methods of growing single crystal materials on the silicon platform and the subsequent low-temperature process flow, through experimental demonstration, theoretical modeling and device structure simplification. First, thin film single crystal GaAs and GaSb were grown on dielectric layers on bulk silicon substrates by the rapid melt growth (RMG) method, using both rapid thermal annealing (RTA) and laser annealing. The relationship between stoichiometry and the crystal structure is discussed according to the theoretical phase diagram and the experimental results. A modified RMG structure is also proposed and demonstrated to solve the potential issue involved in integrating the RMG method into a three-dimensional integrated circuits (3D-IC) process with thick isolation layers. In order to estimate the outcome of the crystallization and to provide further understanding of the physics behind this RMG process, compact models are derived based on classical crystallization theory. Mathematical models including the geometry, the thermal environment and the outcome of the crystallization are built. The initial cooling rate is identified as the key factor for the RMG process. With the ability of integrating multiple materials on silicon substrates, the subsequent process flows using low-temperature-fabrication or simplified device structures are proposed and evaluated to achieve high density 3D integration. A "bonding substrate/monolithic contact" approach is proposed to relieve the thermal constraint from getting the starting single crystal layer without sacrificing the interconnect performance. A low-temperature process using germanium as the channel material is also discussed. Finally, gated thin film resistor structures are designed and compared to the conventional MOSFET structure with a focus on their relative performance and process complexity trade-off for future 3D-IC implementation.

Book Strain Engineered MOSFETs

Download or read book Strain Engineered MOSFETs written by C.K. Maiti and published by CRC Press. This book was released on 2018-10-03 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Currently strain engineering is the main technique used to enhance the performance of advanced silicon-based metal-oxide-semiconductor field-effect transistors (MOSFETs). Written from an engineering application standpoint, Strain-Engineered MOSFETs introduces promising strain techniques to fabricate strain-engineered MOSFETs and to methods to assess the applications of these techniques. The book provides the background and physical insight needed to understand new and future developments in the modeling and design of n- and p-MOSFETs at nanoscale. This book focuses on recent developments in strain-engineered MOSFETS implemented in high-mobility substrates such as, Ge, SiGe, strained-Si, ultrathin germanium-on-insulator platforms, combined with high-k insulators and metal-gate. It covers the materials aspects, principles, and design of advanced devices, fabrication, and applications. It also presents a full technology computer aided design (TCAD) methodology for strain-engineering in Si-CMOS technology involving data flow from process simulation to process variability simulation via device simulation and generation of SPICE process compact models for manufacturing for yield optimization. Microelectronics fabrication is facing serious challenges due to the introduction of new materials in manufacturing and fundamental limitations of nanoscale devices that result in increasing unpredictability in the characteristics of the devices. The down scaling of CMOS technologies has brought about the increased variability of key parameters affecting the performance of integrated circuits. This book provides a single text that combines coverage of the strain-engineered MOSFETS and their modeling using TCAD, making it a tool for process technology development and the design of strain-engineered MOSFETs.

Book High Mobility Materials for CMOS Applications

Download or read book High Mobility Materials for CMOS Applications written by Nadine Collaert and published by Woodhead Publishing. This book was released on 2018-06-29 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Mobility Materials for CMOS Applications provides a comprehensive overview of recent developments in the field of (Si)Ge and III-V materials and their integration on Si. The book covers material growth and integration on Si, going all the way from device to circuit design. While the book's focus is on digital applications, a number of chapters also address the use of III-V for RF and analog applications, and in optoelectronics. With CMOS technology moving to the 10nm node and beyond, however, severe concerns with power dissipation and performance are arising, hence the need for this timely work on the advantages and challenges of the technology. Addresses each of the challenges of utilizing high mobility materials for CMOS applications, presenting possible solutions and the latest innovations Covers the latest advances in research on heterogeneous integration, gate stack, device design and scalability Provides a broad overview of the topic, from materials integration to circuits

Book Dielectrics in Nanosystems  and  Graphene  Ge III V  Nanowires and Emerging Materials for Post CMOS Applications 3

Download or read book Dielectrics in Nanosystems and Graphene Ge III V Nanowires and Emerging Materials for Post CMOS Applications 3 written by Zia Karim and published by The Electrochemical Society. This book was released on 2011-04-25 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: This issue of ECS Transactions will cover the following topics in (a) Graphene Material Properties, Preparation, Synthesis and Growth; (b) Metrology and Characterization of Graphene; (c) Graphene Devices and Integration; (d) Graphene Transport and mobility enhancement; (e) Thermal Behavior of Graphene and Graphene Based Devices; (f) Ge & III-V devices for CMOS mobility enhancement; (g) III.V Heterostructures on Si substrates; (h) Nano-wires devices and modeling; (i) Simulation of devices based on Ge, III-V, nano-wires and Graphene; (j) Nanotechnology applications in information technology, biotechnology and renewable energy (k) Beyond CMOS device structures and properties of semiconductor nano-devices such as nanowires; (l) Nanosystem fabrication and processing; (m) nanostructures in chemical and biological sensing system for healthcare and security; and (n) Characterization of nanosystems; (f) Nanosystem modeling.

Book Sinep 2009  1st International Workshop on Si Based Nano Electronics and  Photonics

Download or read book Sinep 2009 1st International Workshop on Si Based Nano Electronics and Photonics written by Steafno Chiussi and published by Netbiblo. This book was released on 2009-06 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main objective of this International Workshop in Vigo is to target this major problem by bringing together scientists and engineers specialized on various different topics related to group IV semiconductors. In five consecutive sessions dedicated to - Group IV materials: CMOS and further extension of the roadmap - Group IV materials: Nano-photonics - Material aspects and characterization on nano-scale - Nanostructures and material processing on atomic scale

Book High k Gate Dielectrics for CMOS Technology

Download or read book High k Gate Dielectrics for CMOS Technology written by Gang He and published by John Wiley & Sons. This book was released on 2012-08-10 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: A state-of-the-art overview of high-k dielectric materials for advanced field-effect transistors, from both a fundamental and a technological viewpoint, summarizing the latest research results and development solutions. As such, the book clearly discusses the advantages of these materials over conventional materials and also addresses the issues that accompany their integration into existing production technologies. Aimed at academia and industry alike, this monograph combines introductory parts for newcomers to the field as well as advanced sections with directly applicable solutions for experienced researchers and developers in materials science, physics and electrical engineering.

Book Frontiers In Electronics  Selected Papers From The Workshop On Frontiers In Electronics 2013  Wofe 2013

Download or read book Frontiers In Electronics Selected Papers From The Workshop On Frontiers In Electronics 2013 Wofe 2013 written by Sorin Cristoloveanu and published by World Scientific. This book was released on 2014-12-15 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together 11 invited papers from the Workshop on Frontiers in Electronics (WOFE) 2013 that took place at San Juan, Puerto Rico, in December 2013. These articles present the ground-breaking works by world leading experts from CMOS and SOI, to wide-bandgap semiconductor technology, terahertz technology, and bioelectronics.WOFE is a bi-annual gathering of leading researchers from around the world, across multiple disciplines, to share their results and discuss key issues in the future development of microelectronics, photonics, and nanoelectronics.The focus of this volume includes topics ranging from advanced transistors: TFT, FinFET, TFET, HEMT to Nitride devices, as well as emerging technologies, devices and materials.This book will be a useful reference for scientists, engineers, researchers, and inventors looking for the future research and development direction of microelectronics, and the trends and technology underpinning these developments.

Book Semiconductor Wafer Bonding 11  Science  Technology  and Applications   In Honor of Ulrich G  sele

Download or read book Semiconductor Wafer Bonding 11 Science Technology and Applications In Honor of Ulrich G sele written by C. Colinge and published by The Electrochemical Society. This book was released on 2010-10 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductor wafer bonding continues to evolve as a crucial technology extending new integration schemes and disseminating new product architectures in such diverse areas as high quality silicon-on-insulator (SOI) materials for electronic applications, Si-Ge strained layers, Germanium-on-Insulator (GeOI), 3D device integration, Si on quartz or glass for thin film displays, compound semiconductor-on-Si heterostructures and Micro-Electro-Mechanical Systems.

Book Semiconductors  Dielectrics  and Metals for Nanoelectronics 12

Download or read book Semiconductors Dielectrics and Metals for Nanoelectronics 12 written by S. Kar and published by The Electrochemical Society. This book was released on 2014 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Future Trends in Microelectronics

Download or read book Future Trends in Microelectronics written by Serge Luryi and published by John Wiley & Sons. This book was released on 2010-08-03 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the summer of 2009, leading professionals from industry, government, and academia gathered for a free-spirited debate on the future trends of microelectronics. This volume represents the summary of their valuable contributions. Providing a cohesive exploration and holistic vision of semiconductor microelectronics, this text answers such questions as: What is the future beyond shrinking silicon devices and the field-effect transistor principle? Are there green pastures beyond the traditional semiconductor technologies? This resource also identifies the direction the field is taking, enabling microelectronics professionals and students to conduct research in an informed, profitable, and forward-looking fashion.

Book Semiconductor On Insulator Materials for Nanoelectronics Applications

Download or read book Semiconductor On Insulator Materials for Nanoelectronics Applications written by Alexei Nazarov and published by Springer Science & Business Media. This book was released on 2011-03-03 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Semiconductor-On-Insulator Materials for NanoElectronics Applications” is devoted to the fast evolving field of modern nanoelectronics, and more particularly to the physics and technology of nanoelectronic devices built on semiconductor-on-insulator (SemOI) systems. The book contains the achievements in this field from leading companies and universities in Europe, USA, Brazil and Russia. It is articulated around four main topics: 1. New semiconductor-on-insulator materials; 2. Physics of modern SemOI devices; 3. Advanced characterization of SemOI devices; 4. Sensors and MEMS on SOI. "Semiconductor-On-Insulator Materials for NanoElectonics Applications” is useful not only to specialists in nano- and microelectronics but also to students and to the wider audience of readers who are interested in new directions in modern electronics and optoelectronics.

Book Reliability of High Mobility Sige Channel Mosfets for Future CMOS Applications

Download or read book Reliability of High Mobility Sige Channel Mosfets for Future CMOS Applications written by Jacopo Franco and published by . This book was released on 2013-11-30 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Selected Semiconductor Research

Download or read book Selected Semiconductor Research written by Ming-Fu Li and published by World Scientific. This book was released on 2011 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book on solid state physics has been written with an emphasis on recent developments in quantum many-body physics approaches. It starts by covering the classical theory of solids and electrons and describes how this classical model has failed. The authors then present the quantum mechanical model of electrons in a lattice and they also discuss the theory of conductivity. Extensive reviews on the topic are provided in a compact manner so that any non-specialist can follow from the beginning.The authors cover the system of magnetism in a similar way and various problems in magnetic materials are discussed. The book also discusses the Ising chain, the Heisenberg model, the Kondo effect and superconductivity, amongst other relevant topics.In the final chapter, the authors present some works related to contemporary research topics, such as quantum entanglement in many-body systems and quantum simulations. They also include a short review of some of the possible applications of solid state quantum information in biological systems.

Book Fundamentals of III V Semiconductor MOSFETs

Download or read book Fundamentals of III V Semiconductor MOSFETs written by Serge Oktyabrsky and published by Springer Science & Business Media. This book was released on 2010-03-16 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of III-V Semiconductor MOSFETs presents the fundamentals and current status of research of compound semiconductor metal-oxide-semiconductor field-effect transistors (MOSFETs) that are envisioned as a future replacement of silicon in digital circuits. The material covered begins with a review of specific properties of III-V semiconductors and available technologies making them attractive to MOSFET technology, such as band-engineered heterostructures, effect of strain, nanoscale control during epitaxial growth. Due to the lack of thermodynamically stable native oxides on III-V's (such as SiO2 on Si), high-k oxides are the natural choice of dielectrics for III-V MOSFETs. The key challenge of the III-V MOSFET technology is a high-quality, thermodynamically stable gate dielectric that passivates the interface states, similar to SiO2 on Si. Several chapters give a detailed description of materials science and electronic behavior of various dielectrics and related interfaces, as well as physics of fabricated devices and MOSFET fabrication technologies. Topics also include recent progress and understanding of various materials systems; specific issues for electrical measurement of gate stacks and FETs with low and wide bandgap channels and high interface trap density; possible paths of integration of different semiconductor materials on Si platform.

Book Silicon Nitride  Silicon Dioxide  and Emerging Dielectrics 10

Download or read book Silicon Nitride Silicon Dioxide and Emerging Dielectrics 10 written by R. Ekwal Sah and published by The Electrochemical Society. This book was released on 2009 with total page 871 pages. Available in PDF, EPUB and Kindle. Book excerpt: The issue of ECS Transactions contains papers presented at the Tenth International Symposium on Silicon Nitride, Silicon Dioxide, and Alternate Emerging Dielectrics held in San Francisco on May 24-29, 2009. The papers address a very wide range of fabrication and characterization techniques, and applications of thin dielectric films in microelectronic and optoelectronic devices. More specific topics addressed by the papers include reliability, interface states, gate oxides, passivation, and dielctric breakdown.

Book Advanced Gate Stack  Source Drain  and Channel Engineering for Si Based CMOS 5  New Materials  Processes  and Equipment

Download or read book Advanced Gate Stack Source Drain and Channel Engineering for Si Based CMOS 5 New Materials Processes and Equipment written by V. Narayanan and published by The Electrochemical Society. This book was released on 2009-05 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: This issue of ¿ECS Transactions¿ describes processing, materials and equipment for CMOS front-end integration including gate stack, source/drain and channel engineering. Topics include strained Si/SiGe and Si/SiGe on insulator; high-mobility channels including III-V¿s, etc.; nanowires and carbon nanotubes; high-k dielectrics, metal and FUSI gate electrodes; doping/annealing for ultra-shallow junctions; low-resistivity contacts; advanced deposition (e.g. ALD, CVD, MBE), RTP, UV, plasma and laser-assisted processes.