Download or read book Interconnected Manufacturing Systems written by Harold Nicholson and published by Institution of Electrical Engineers. This book was released on 1991 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of the processes in discrete-event manufacturing systems, and emphasizes concepts relating to the interconnection of the wide range of activities involved. It highlights, particularly, the hierarchical structural properties of interconnection and the existence of forward (command) and reverse (monitoring) flows of information and activities which are encountered in most physical, biological and socio-economic systems.
Download or read book Handbook of Manufacturing Systems and Design written by Uzair Khaleeq uz Zaman and published by CRC Press. This book was released on 2023-08-24 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of manufacturing systems, their role in product/process design, and their interconnection with an Industry 4.0 perspective, especially related to design, manufacturing, and operations. Handbook of Manufacturing Systems and Design: An Industry 4.0 Perspective provides the knowledge related to the theories and concepts of Industry 4.0. It focuses on the different types of manufacturing systems in Industry 4.0 along with associated design, and control strategies. It concentrates on the operations in Industry 4.0 with a particular focus on supply chain, logistics, risk management, and reverse engineering perspectives. Offering basic concepts and applications through to advanced topics, the handbook feeds into the goal of being a source of knowledge as well as a vehicle to explore the future possibilities of design, techniques, methods, and operations associated with Industry 4.0. Concepts with practical applications in the form of case studies are added to each chapter to round out the many attributes this handbook offers. This handbook targets students, engineers, managers, designers, and manufacturers, and will assist in their understanding of the core concepts of manufacturing systems in connection with Industry 4.0 and optimize alignment between supply and demand in real time for effective implementation of the design concepts.
Download or read book Service Oriented Holonic and Multi agent Manufacturing Systems for Industry of the Future written by Theodor Borangiu and published by . This book was released on 2020 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings book presents selected peer-reviewed papers from the 9th International Workshop on 'Service Oriented, Holonic and Multi-agent Manufacturing Systems for the Industry of the Future organized by Universitat Politècnica de València, Spain, and held on October 3–4, 2019. The SOHOMA 2019 Workshop aimed to foster innovation in the digital transformation of manufacturing and logistics by promoting new concepts and methods and solutions through service orientation in holonic and agent-based control with distributed intelligence. The book provides insights into the theme of the SOHOMA19 Workshop – 'Smart anything everywhere – the vertical and horizontal manufacturing integration, addressing 'Industry of the Future (IoF), a term used to describe the 4th industrial revolution initiated by a new generation of adaptive, fully connected, analytical and highly efficient robotized manufacturing systems. This global IoF model describes a new stage of manufacturing, that is fully automatized and uses advanced information, communication and control technologies such as industrial IoT, cyber-physical production systems, cloud manufacturing, resource virtualization, product intelligence, and digital twin, edge and fog computing. It presents the IoF interconnection of distributed manufacturing entities using a 'system-of-systems approach, discussing new types of highly interconnected and self-organizing production resources in the entire value chain; and new types of intelligent decision-making support based on from real-time production data collected from resources, products and machine learning processing. This book is intended for researchers and engineers working in the manufacturing value chain, and specialists developing computer-based control and robotics solutions for the 'Industry of the Future. It is also a valuable resource for masters and Ph.D. students in engineering sciences programs.
Download or read book Scheduling in Industry 4 0 and Cloud Manufacturing written by Boris Sokolov and published by Springer Nature. This book was released on 2020-06-08 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has resulted from the activities of IFAC TC 5.2 “Manufacturing Modelling for Management and Control”. The book offers an introduction and advanced techniques of scheduling applications to cloud manufacturing and Industry 4.0 systems for larger audience. This book uncovers fundamental principles and recent developments in the theory and application of scheduling methodology to cloud manufacturing and Industry 4.0. The purpose of this book is to present recent developments in scheduling in cloud manufacturing and Industry 4.0 and to systemize these developments in new taxonomies and methodological principles to shape this new research domain. This book addresses the needs of both researchers and practitioners to uncover the challenges and opportunities of scheduling techniques’ applications to cloud manufacturing and Industry 4.0. For the first time, it comprehensively conceptualizes scheduling in cloud manufacturing and Industry 4.0 systems as a new research domain. The chapters of the book are written by the leading international experts and utilize methods of operations research, industrial engineering and computer science. Such a multi-disciplinary combination is unique and comprehensively deciphers major problem taxonomies, methodologies, and applications to scheduling in cloud manufacturing and Industry 4.0.
Download or read book The Fourth Industrial Revolution written by Klaus Schwab and published by Currency. This book was released on 2017-01-03 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: World-renowned economist Klaus Schwab, Founder and Executive Chairman of the World Economic Forum, explains that we have an opportunity to shape the fourth industrial revolution, which will fundamentally alter how we live and work. Schwab argues that this revolution is different in scale, scope and complexity from any that have come before. Characterized by a range of new technologies that are fusing the physical, digital and biological worlds, the developments are affecting all disciplines, economies, industries and governments, and even challenging ideas about what it means to be human. Artificial intelligence is already all around us, from supercomputers, drones and virtual assistants to 3D printing, DNA sequencing, smart thermostats, wearable sensors and microchips smaller than a grain of sand. But this is just the beginning: nanomaterials 200 times stronger than steel and a million times thinner than a strand of hair and the first transplant of a 3D printed liver are already in development. Imagine “smart factories” in which global systems of manufacturing are coordinated virtually, or implantable mobile phones made of biosynthetic materials. The fourth industrial revolution, says Schwab, is more significant, and its ramifications more profound, than in any prior period of human history. He outlines the key technologies driving this revolution and discusses the major impacts expected on government, business, civil society and individuals. Schwab also offers bold ideas on how to harness these changes and shape a better future—one in which technology empowers people rather than replaces them; progress serves society rather than disrupts it; and in which innovators respect moral and ethical boundaries rather than cross them. We all have the opportunity to contribute to developing new frameworks that advance progress.
Download or read book Supply Chain Management in Manufacturing and Service Systems written by Sharan Srinivas and published by Springer Nature. This book was released on 2021-06-25 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Management of supply chains has been evolving rapidly over the last few years due to the inception of Industry 4.0, where businesses adopt automation technologies and data exchanges leading to dynamic and interconnected supply chain systems. Emphasizing on analytical approaches such as predictive and prescriptive modeling, this book presents state-of-the-art original research work dealing with advanced analytical models for the design, planning, and operation of the supply chain to provide faster and smarter decisions in the era of digitization. In particular, the book integrates machine learning and operations research models for faster and smarter decisions, presents prescriptive analytics models for strategic, tactical, and operational decision making in the supply chain, and addresses recent challenges such as sustainability in the supply chain, supply chain visibility, and supply chain digitalization. Key concepts are illustrated using real-life case studies, making the book a valuable reference for researchers, technical professionals, and students.
Download or read book Smart Manufacturing Innovation and Transformation Interconnection and Intelligence written by Luo, ZongWei and published by IGI Global. This book was released on 2014-03-31 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fast advances in information technology have led to a smarter world vision with ubiquitous interconnection and intelligence. Smart Manufacturing Innovation and Transformation: Interconnection and Intelligence covers both theoretical perspectives and practical approaches to smart manufacturing research and development triggered by ubiquitous interconnection and intelligence. This reference work discusses the transformation of manufacturing, the latest developments in smart manufacturing innovation, current and emerging technology opportunities, and market imperatives that enable manufacturing innovation and transformation, useful tools for readers in industry, academia, and government.
Download or read book Industrial Internet of Things written by Sabina Jeschke and published by Springer. This book was released on 2016-10-12 with total page 714 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book develops the core system science needed to enable the development of a complex industrial internet of things/manufacturing cyber-physical systems (IIoT/M-CPS). Gathering contributions from leading experts in the field with years of experience in advancing manufacturing, it fosters a research community committed to advancing research and education in IIoT/M-CPS and to translating applicable science and technology into engineering practice. Presenting the current state of IIoT and the concept of cybermanufacturing, this book is at the nexus of research advances from the engineering and computer and information science domains. Readers will acquire the core system science needed to transform to cybermanufacturing that spans the full spectrum from ideation to physical realization.
Download or read book Integrated Manufacturing Systems written by and published by . This book was released on 2002 with total page 77 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Linkages written by National Research Council and published by National Academies Press. This book was released on 2006-01-19 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past two decades, the Department of Defense has been moving toward commercial-military integration for manufacturing, while at the same time, the printed circuit board industry has been moving steadily offshore. Today, many in DoD, the U.S. Congress, and the federal government lack a clear understanding of the importance of high-quality, trustworthy printed circuit boards (PrCBs) for properly functioning weapons and other defense systems and components. To help develop this understanding, DOD requested the NRC to identify and assess the key issues affecting PrCBs for military use. This report presents a discussion of how to ensure DOD's access to reliable printed circuits; an assessment of its vulnerability to the global printed circuit supply chain; and suggestions about ways to secure the design and manufacture of printed circuits. In addition, this report offers recommendations to help DoD (1) preserve existing systems' capabilities, (2) improve the military's access to currently available PrCBs, and (3) ensure access to future PrCB technology. The recommendations reflect the need to achieve these goals at reasonable cost and in concert with evolving environmental regulations.
Download or read book Encyclopedia of Production and Manufacturing Management written by Paul M. Swamidass and published by Springer Science & Business Media. This book was released on 2000-06-30 with total page 833 pages. Available in PDF, EPUB and Kindle. Book excerpt: Production and manufacturing management since the 1980s has absorbed in rapid succession several new production management concepts: manufacturing strategy, focused factory, just-in-time manufacturing, concurrent engineering, total quality management, supply chain management, flexible manufacturing systems, lean production, mass customization, and more. With the increasing globalization of manufacturing, the field will continue to expand. This encyclopedia's audience includes anyone concerned with manufacturing techniques, methods, and manufacturing decisions.
Download or read book Engineering Systems and Networks written by Marlene Amorim and published by Springer. This book was released on 2016-12-18 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers a selection of the best papers presented at the joint international conference ICIEOM-CIO-IIE 2015, offering recent research on industrial engineering, management and operations from an international and interdisciplinary perspective. It includes contributions from different fields, such as operations research, modeling and simulation, production and service management and logistics, information systems and quality, and as such is of interest to both researchers and practitioners. Reflecting the interconnected nature of today’s production systems, characterized by intense flows of goods, information and individuals between companies and nations, it is a valuable resource for anyone wanting an in-depth understanding of the field to guide managerial practice in order to take full advantage of existing opportunities.
Download or read book Information Technology for Manufacturing written by National Research Council and published by National Academies Press. This book was released on 1995-02-27 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes a vision of manufacturing in the twenty-first century that maximizes efficiencies and improvements by exploiting the full power of information and provides a research agenda for information technology and manufacturing that is necessary for success in achieving such a vision. Research on information technology to support product and process design, shop-floor operations, and flexible manufacturing is described. Roles for virtual manufacturing and the information infrastructure are also addressed. A final chapter is devoted to nontechnical research issues.
Download or read book Integrated Reconfigurable Manufacturing Systems and Smart Value Chain written by M. Reza Abdi and published by Springer. This book was released on 2018-05-30 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book develops manufacturing concepts and applications beyond physical production and towards a wider manufacturing value chain incorporating external stakeholders that include suppliers of raw materials and parts, customers, collaborating manufacturing companies, manufacturing service providers, and environmental organisations. The focal point of the value chain remains as a manufacturing system and its operations whiles flows of parts/materials and information and services across the supply/value chain tiers are taken into account. The book emphasises on the two innovative paradigms of Reconfigurable Manufacturing Systems (RMS) and the 4th industrial revolution (Industry 4.0) along with their incorporated development. RMS, as a relatively new paradigm, has been introduced to meet the requirements of ‘the factories of the future’, which is aimed by Industry 4.0, though introducing greater responsiveness and customised flexibility into production systems, in which changes in product volumes and types occur regularly. Manufacturing responsiveness can be achieved by RMS through reconfiguring the production facilities according to changing demands of products and new market conditions. The book addresses challenges of mass-customisation and dynamic changes in the supply-chain environment by focusing on developing new techniques related to integrability, scalability and re-configurability at a system level and manufacturing readiness in terms of financial and technical feasibility of RMS. It demonstrate the expected impacts of an RMS design on operational performance and its supply/value chain in the current/future manufacturing environment facing dynamic changes in the internal/external circumstances. In order to establish a circular economy through the RMS value chain, an integrated data-based reconfiguration link is introduced to incorporate information sharing amongst the value chain stakeholders and facilitate grouping products into families with allocation of the product families to the corresponding system configurations with optimal product-process allocation. Decision support systems such as multi criteria decision making tools are developed and applied for the selection of product families and optimising product-process configuration. The proposed models are illustrated through real case studies in applicable manufacturing firms.
Download or read book Closing the Gap Between Practice and Research in Industrial Engineering written by Elisabeth Viles and published by Springer. This book was released on 2017-08-17 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the XXII International Conference on Industrial Engineering and Operations Management, International IIE Conference 2016, and International AIM Conference 2016. This joint conference is a result of an agreement between ADINGOR (Asociación para el Desarrollo de la Ingeniería de Organización), ABEPRO (Associação Brasileira de Engenharia de Produção), AIM (European Academy for Industrial Management) and the IIE (Institute of Industrial Engineers), and took place at TECNUN-School of Engineering (San Sebastián, Spain) from July 13th to 15th, 2016. The book includes the latest research advances and cutting-edge analyses of real case studies in Industrial Engineering and Operations Management from diverse international contexts, while also identifying concrete business applications for the latest findings and innovations in operations management and the decisions sciences.
Download or read book Industry 4 0 for SMEs written by Dominik T. Matt and published by Springer Nature. This book was released on 2020-01-03 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book explores the concept of Industry 4.0, which presents a considerable challenge for the production and service sectors. While digitization initiatives are usually integrated into the central corporate strategy of larger companies, smaller firms often have problems putting Industry 4.0 paradigms into practice. Small and medium-sized enterprises (SMEs) possess neither the human nor financial resources to systematically investigate the potential and risks of introducing Industry 4.0. Addressing this obstacle, the international team of authors focuses on the development of smart manufacturing concepts, logistics solutions and managerial models specifically for SMEs. Aiming to provide methodological frameworks and pilot solutions for SMEs during their digital transformation, this innovative and timely book will be of great use to scholars researching technology management, digitization and small business, as well as practitioners within manufacturing companies.
Download or read book Design of Interconnection Networks for Programmable Logic written by Guy Lemieux and published by Springer Science & Business Media. This book was released on 2003-11-30 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: Programmable Logic Devices (PLDs) have become the key implementation medium for the vast majority of digital circuits designed today. While the highest-volume devices are still built with full-fabrication rather than field programmability, the trend towards ever fewer ASICs and more FPGAs is clear. This makes the field of PLD architecture ever more important, as there is stronger demand for faster, smaller, cheaper and lower-power programmable logic. PLDs are 90% routing and 10% logic. This book focuses on that 90% that is the programmable routing: the manner in which the programmable wires are connected and the circuit design of the programmable switches themselves. Anyone seeking to understand the design of an FPGA needs to become lit erate in the complexities of programmable routing architecture. This book builds on the state-of-the-art of programmable interconnect by providing new methods of investigating and measuring interconnect structures, as well as new programmable switch basic circuits. The early portion of this book provides an excellent survey of interconnec tion structures and circuits as they exist today. Lemieux and Lewis then provide a new way to design sparse crossbars as they are used in PLDs, and show that the method works with an empirical validation. This is one of a few routing architecture works that employ analytical methods to deal with the routing archi tecture design. The analysis permits interesting insights not typically possible with the standard empirical approach.
