Download or read book Intelligent Technologies for Scientific Research and Engineering written by S. Kannadhasan and published by Bentham Science Publishers. This book was released on 2023-07-11 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference is a compilation of work from different technology groups that give an insight into strategies used for technology optimization and technical R&D. Each of the 14 chapters presented in the book are contributed by engineering experts and focus on different aspects of smart technologies. The chapters cover a wide range of technical disciplines with a list of references for further reading. The compilation demonstrates methods that are useful to apprentices and researchers involved in the development of technologies in different fields: · Wireless networking · Signal processing · Control and machine engineering · SOC design · Materials science and nanotechnology · Biomedical engineering · Power electronics The contributions in this book provide interesting examples for product development such as custom nanomaterials, digital electronics, smart devices and antennas. The content also serves as a reference for designing special components used for complex systems like wireless communication systems, automated control systems and organic waste processing systems. The content is structured in a format suitable for both learners and advanced researchers, making this reference essential to engineers at all levels.

Download or read book Intelligent Technologies for Research and Engineering written by S. Kannadhasan and published by Bentham Science Publishers. This book was released on 2024-06-07 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume covers a wide array of topics related to research, technology and sustainability for technology researchers and educators. Chapter 1 explores the detection of fake news in a distributed environment. Material science is covered in Chapter 2, which explains the influence of MOS2, B4C, and graphite on the mechanical and dry sliding wear behavior of aluminum 7075 hybrid matrix composites. Chapter 3 focuses on sensors and antennas for smart sensor networks. Chapters 4 to 8 delve into various aspects of electrical and computer engineering, including induction motor condition monitoring, automatic conversion of building plans to graphs for robot navigation, and analysis of defects in microscopic and electroluminescent images using AI and image processing algorithms. Chapters 9 to 16 cover topics such as missing data prediction techniques, breast cancer diagnosis on mammography, groundwater contamination, biofertilizers, organic farming, and remediation using organisms. Sustainable development is a key theme in Chapters 17 to 26, addressing issues like sensor-based vehicle fuel theft detection, waste management techniques, bioremediation of soil contaminated with heavy metals, sustainable agriculture practices, and novel approaches in bioplastics and nanoremediation. Finally, Chapters 27 to 29 touch upon renewable energy and Industrial IoT, discussing research challenges in renewable energy sources, recent trends, and the transformation brought about by the Industrial Internet of Things.

Download or read book Intelligent Techniques and Applications in Science and Technology written by Subhojit Dawn and published by Springer Nature. This book was released on 2020-03-02 with total page 1126 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides innovative ideas on achieving sustainable development and using green technologies to conserve our ecosystem. Innovation is the successful exploitation of a new idea. Through innovation, we can achieve MORE while using LESS. Innovations in science & technology will not only help mankind as a whole, but also contribute to the economic growth of individual countries. It is essential that the global problem of environmental degradation be addressed immediately, and thus, we need to rethink the concept of sustainable development. Indeed, new environmentally friendly technologies are fundamental to attaining sustainable development. The book shares a wealth of innovative green technological ideas on how to preserve and improve the quality of the environment, and how to establish a more resource-efficient and sustainable society. The book provides an interdisciplinary approach to addressing various technical issues and capitalizing on advances in computing & optimization for scientific & technological development, smart information, communication, bio-monitoring, smart cities, food quality assessment, waste management, environmental aspects, alternative energies, sustainable infrastructure development, etc. In short, it offers valuable information and insights for budding engineers, researchers, upcoming young minds and industry professionals, promoting awareness for recent advances in the various fields mentioned above.

Download or read book Intelligent Technologies for Research and Engineering written by S. Kannadhasan and published by Bentham Science Publishers. This book was released on 2024-07-12 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume explores diverse applications for automated machine learning and predictive analytics. The content provides use cases for machine learning in different industries such as healthcare, agriculture, cybersecurity, computing and transportation. Key highlights of this volume include topics on engineering for underwater navigation, and computer vision for healthcare and biometric applications. Chapters 1-4 delve into innovative signal detection, biometric authentication, underwater AUV localization, and COVID-19 face mask detection. Chapters 5-9 focus on wireless pH sensing, differential pattern identification, economic considerations in off-grid hybrid power, high optimization of image transmission, and ANN-based IoT-bot traffic detection. Chapters 10-12 cover mixed-signal VLSI design, pre-placement 3D floor planning, and bio-mimic robotic fish. Finally, Chapters 13 and 14 explore underwater robotic fish and IoT-based automatic irrigation systems, providing a comprehensive overview of cutting-edge technological advancements. The book is a resource for academics, researchers, educators and professionals in the technology sector who want to learn about current trends in intelligent technologies.

Download or read book Intelligent Technologies and Engineering Systems written by Jengnan Juang and published by Springer Science & Business Media. This book was released on 2013-05-21 with total page 1006 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book concentrates on intelligent technologies as it relates to engineering systems. The book covers the following topics: networking, signal processing, artificial intelligence, control and software engineering, intelligent electronic circuits and systems, communications, and materials and mechanical engineering. The book is a collection of original papers that have been reviewed by technical editors. These papers were presented at the International Conference on Intelligent Technologies and Engineering Systems, held Dec. 13-15, 2012.

Download or read book Emerging Intelligent Technologies in Industry written by Dominik Ryżko and published by Springer Science & Business Media. This book was released on 2011-08-20 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intelligent technologies are the essential factors of innovation, and enable the industry to overcome technological limitations and explore the new frontiers. Therefore it is necessary for scientists and practitioners to cooperate and inspire each other, and use the latest research results in creating new designs and products. The idea of this book came out with the industrial workshop organized at the ISMIS conference in Warsaw, 2011. The book covers several applications of emerging, intelligent technologies in various branches of the industry. The contributions describe modern intelligent tools, algorithms and architectures, which have the potential to solve real problems, experienced by practitioners in various industry sectors. We hope this volume will show new directions for cooperation between science and industry and will facilitate efficient transfer of knowledge in the area of intelligent information systems.

Download or read book Intelligent Information Technologies Concepts Methodologies Tools and Applications written by Sugumaran, Vijayan and published by IGI Global. This book was released on 2007-11-30 with total page 2614 pages. Available in PDF, EPUB and Kindle. Book excerpt: This set compiles more than 240 chapters from the world's leading experts to provide a foundational body of research to drive further evolution and innovation of these next-generation technologies and their applications, of which scientific, technological, and commercial communities have only begun to scratch the surface.

Download or read book Developments and Trends in Intelligent Technologies and Smart Systems written by Sugumaran, Vijayan and published by IGI Global. This book was released on 2017-09-13 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to the exponential rise of emerging technology, there have been significant developments in intelligent systems. This has facilitated increasing opportunities for new applications and improvements. Developments and Trends in Intelligent Technologies and Smart Systems is a critical source of scholarly material on the design, implementation, and integration of intelligent applications across numerous industries. Highlighting a range of innovative topics such as enterprise modeling, remote patient monitoring, and service-oriented architecture, this book is ideally designed for researchers, engineers, computer scientists, academics, students, and professionals interested in the latest applications of intelligent technologies.

Download or read book Intelligent Technologies for Internet of Vehicles written by Naercio Magaia and published by Springer Nature. This book was released on 2021-06-09 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers recent research works in emerging Artificial Intelligence (AI) methods for the convergence of communication, caching, control, and computing resources in cloud-based Internet of Vehicles (IoV) infrastructures. In this context, the book's major subjects cover the analysis and the development of AI-powered mechanisms in future IoV applications and architectures. It addresses the major new technological developments in the field and reflects current research trends and industry needs. It comprises a good balance between theoretical and practical issues, covering case studies, experience and evaluation reports, and best practices in utilizing AI applications in IoV networks. It also provides technical/scientific information about various aspects of AI technologies, ranging from basic concepts to research-grade material, including future directions. This book is intended for researchers, practitioners, engineers, and scientists involved in designing and developing protocols and AI applications and services for IoV-related devices.

Download or read book Computational Intelligence in Emerging Technologies for Engineering Applications written by Orestes Llanes Santiago and published by Springer Nature. This book was released on 2020-02-14 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores applications of computational intelligence in key and emerging fields of engineering, especially with regard to condition monitoring and fault diagnosis, inverse problems, decision support systems and optimization. These applications can be beneficial in a broad range of contexts, including: water distribution networks, manufacturing systems, production and storage of electrical energy, heat transfer, acoustic levitation, uncertainty and robustness of infinite-dimensional objects, fatigue failure prediction, autonomous navigation, nanotechnology, and the analysis of technological development indexes. All applications, mathematical and computational tools, and original results are presented using rigorous mathematical procedures. Further, the book gathers contributions by respected experts from 22 different research centers and eight countries: Brazil, Cuba, France, Hungary, India, Japan, Romania and Spain. The book is intended for use in graduate courses on applied computation, applied mathematics, and engineering, where tools like computational intelligence and numerical methods are applied to the solution of real-world problems in emerging areas of engineering.

Download or read book Intelligent Techniques and Soft Computing for Nuclear Science and Engineering written by Da Ruan and published by World Scientific. This book was released on 2000 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is divided into three parts. The first part, ?Mathematical Tools and New Developments?, provides basic tools to treat fuzzy set theory, rough set theory, fuzzy control, fuzzy modelling, decision support systems, and related applications. The second part, ?Intelligent Engineering Applications?, reports on engineering problems such as man-machine interface, risk analysis, image processing, robotics, knowledge-based engineering, expert systems, process control integration, diagnosis, measurements and interpretation by intelligent techniques and soft computing used for general engineering applications. The third part, ?Nuclear Engineering Applications?, concentrates on nuclear applications and covers several topics such as nuclear energy, nuclear safety assessment, radioactive waste management, nuclear measurements, nuclear safeguards, nuclear reactor operation, reactor controller design, fuel reload pattern design, signal validation, nuclear power plants, and optimizations in nuclear applications.

Download or read book Advanced Intelligent Technologies for Industry written by Kazumi Nakamatsu and published by Springer Nature. This book was released on 2022-05-18 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book includes new research results of scholars from the Second International Conference on Advanced Intelligent Technologies (ICAIT 2021) subtitled Intelligent Technology and Industry organized by IRNet International Academic Communication Center, held during October 15–17, 2021. The book covers research work from active researchers who are working on collaboration of industry and various intelligent technologies such as intelligent technologies applicable/applied to manufacturing and distribution of industrial products, factory automation, business, etc. The book focuses on theory, design, development, testing, and evaluation of all intelligent technologies applicable/applied to various parts of industry and its infrastructure. The topics included are all computational intelligence techniques applicable/applied to industry, intelligent techniques in data science applicable/applied to business and management, intelligent network systems applicable/applied to industrial production, intelligent technologies applicable to smart agriculture, and intelligent information systems for agriculture.

Download or read book Data Science and Knowledge Engineering for Sensing Decision Support written by Jun Liu and published by World Scientific. This book was released on 2018-07-26 with total page 1624 pages. Available in PDF, EPUB and Kindle. Book excerpt: FLINS, originally an acronym for Fuzzy Logic and Intelligent Technologies in Nuclear Science, is now extended to include Computational Intelligence for applied research. The contributions of the FLINS conference cover state-of-the-art research, development, and technology for computational intelligence systems, with special focuses on data science and knowledge engineering for sensing decision support, both from the foundations and the applications points-of-view.

Download or read book Developments Of Artificial Intelligence Technologies In Computation And Robotics Proceedings Of The 14th International Flins Conference Flins 2020 written by Zhong Li and published by World Scientific. This book was released on 2020-08-04 with total page 1588 pages. Available in PDF, EPUB and Kindle. Book excerpt: FLINS, an acronym introduced in 1994 and originally for Fuzzy Logic and Intelligent Technologies in Nuclear Science, is now extended into a well-established international research forum to advance the foundations and applications of computational intelligence for applied research in general and for complex engineering and decision support systems.The principal mission of FLINS is bridging the gap between machine intelligence and real complex systems via joint research between universities and international research institutions, encouraging interdisciplinary research and bringing multidiscipline researchers together.FLINS 2020 is the fourteenth in a series of conferences on computational intelligence systems.

Download or read book Intelligent Systems for Engineers and Scientists written by Adrian A. Hopgood and published by CRC Press. This book was released on 2012-02-02 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third edition of this bestseller examines the principles of artificial intelligence and their application to engineering and science, as well as techniques for developing intelligent systems to solve practical problems. Covering the full spectrum of intelligent systems techniques, it incorporates knowledge-based systems, computational intelligence, and their hybrids. Using clear and concise language, Intelligent Systems for Engineers and Scientists, Third Edition features updates and improvements throughout all chapters. It includes expanded and separated chapters on genetic algorithms and single-candidate optimization techniques, while the chapter on neural networks now covers spiking networks and a range of recurrent networks. The book also provides extended coverage of fuzzy logic, including type-2 and fuzzy control systems. Example programs using rules and uncertainty are presented in an industry-standard format, so that you can run them yourself. The first part of the book describes key techniques of artificial intelligence—including rule-based systems, Bayesian updating, certainty theory, fuzzy logic (types 1 and 2), frames, objects, agents, symbolic learning, case-based reasoning, genetic algorithms, optimization algorithms, neural networks, hybrids, and the Lisp and Prolog languages. The second part describes a wide range of practical applications in interpretation and diagnosis, design and selection, planning, and control. The author provides sufficient detail to help you develop your own intelligent systems for real applications. Whether you are building intelligent systems or you simply want to know more about them, this book provides you with detailed and up-to-date guidance. Check out the significantly expanded set of free web-based resources that support the book at: http://www.adrianhopgood.com/aitoolkit/

Download or read book Advanced Computing and Intelligent Technologies written by Rabindra Nath Shaw and published by Springer Nature. This book was released on with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Applications of Artificial Intelligence for Smart Technology written by Swarnalatha, P. and published by IGI Global. This book was released on 2020-10-30 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: As global communities are attempting to transform into more efficient and technologically-advanced metropolises, artificial intelligence (AI) has taken a firm grasp on various professional fields. Technology used in these industries is transforming by introducing intelligent techniques including machine learning, cognitive computing, and computer vision. This has raised significant attention among researchers and practitioners on the specific impact that these smart technologies have and what challenges remain. Applications of Artificial Intelligence for Smart Technology is a pivotal reference source that provides vital research on the implementation of advanced technological techniques in professional industries through the use of AI. While highlighting topics such as pattern recognition, computational imaging, and machine learning, this publication explores challenges that various fields currently face when applying these technologies and examines the future uses of AI. This book is ideally designed for researchers, developers, managers, academicians, analysts, students, and practitioners seeking current research on the involvement of AI in professional practices.