Download or read book Intelligent Optimization of Mold Design and Process Parameters in Injection Molding written by Mehdi Moayyedian and published by Springer. This book was released on 2018-11-02 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes an effective framework for setting the right process parameters and new mold design to reduce the current plastic defects in injection molding. It presents a new approach for the optimization of injection molding process via (i) a new mold runner design which leads to 20 percent reduction in scrap rate, 2.5 percent reduction in manufacturing time, and easier ejection of injected part, (ii) a new mold gate design which leads to less plastic defects; and (iii) the introduction of a number of promising alternatives with high moldability indices. Besides presenting important developments of relevance academic research, the book also includes useful information for people working in the injection molding industry, especially in the green manufacturing field.
Download or read book Injection Molding Process Modelling written by Tien-Chien Jen and published by CRC Press. This book was released on 2024-09-11 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt: Injection Molding Process Modelling presents the application of CAE, statistics and AI in defect identification, control, and optimization of injection molding process for quality production. It showcases CAE in determining the optimal placement of injection points, designing cooling channels, and ensuring that the mold will produce parts with the desired specifications. The book illustrates the capability of the CAE tools to simulate molten plastic flow within a mold during the injection molding process. Explaining how the use of CAE, statistical tools and AI enhances efficiency, accuracy, and collaboration, the book explores the contributions to injection molding in product design and visualization; prototyping and testing; mold design; and analysis and simulation. It emphasizes the integration of statistical tools for optimized efficiency and waste reduction, including statistical process control (SPC), Design of Experiments (DOE), Regression Analysis, Capability Indices, Interaction effects, and many more. The book also illustrates the predictive modelling of typical injection molded product defects using intelligent algorithms. The book will interest industry professionals and engineers working in manufacturing, production, automation, and quality control.
Download or read book Injection Mold Design Engineering written by David Kazmer and published by . This book was released on 2007 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book provides a vision and structure to finally synergize all the engineering disciplines that converge in the mold design process. The topics are presented in a top-down manner, beginning with introductory definitions and the”big picture“before proceeding to layout and detailed design of molds. The book provides very pragmatic analysis with worked examples that can be readily adapted to”real world“mold design-applications. It should help students and practitioners to understand the inner workings of injection molds and encourage them to think”outside the box“in developing innovative and highly functional mold designs."--Jacket.
Download or read book Computer Modeling for Injection Molding written by Huamin Zhou and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a wide range of applications and uses of simulation and modeling techniques in polymer injection molding, filling a noticeable gap in the literature of design, manufacturing, and the use of plastics injection molding. The authors help readers solve problems in the advanced control, simulation, monitoring, and optimization of injection molding processes. The book provides a tool for researchers and engineers to calculate the mold filling, optimization of processing control, and quality estimation before prototype molding.
Download or read book Innovations in Mechatronics Engineering II written by José Machado and published by Springer Nature. This book was released on 2022-06-20 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a variety of topics in the field of mechatronics engineering, with a special focus on innovative control systems and automation concepts for a wide range of applications. Based on a set of papers presented at the 2nd International Conference “Innovation in Engineering”, ICIE, held in Minho, Portugal, on June 28-30, 2022, the chapters report on cutting-edge control algorithms for mobile robots, automatic monitoring systems and intelligent predictive maintenance techniques. They cover advanced scheduling, risk-assessment and decision-making strategies, and their applications in industrial production, training and education, and service organizations. This volume, which belongs to a three-volume set, provides engineering researchers and professionals with a timely overview and extensive information on trends and technologies behind the future developments of mechatronics systems in the era of Industry 4.0.
Download or read book Innovations in Mechanical Engineering II written by José Machado and published by Springer Nature. This book was released on 2022-06-17 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a variety of topics in the field of mechanical engineering, with a special focus on methods and technologies for modeling, simulation, and design of mechanical systems. Based on a set of papers presented at the 2nd International Conference “Innovation in Engineering”, ICIE, held in Minho, Portugal, on June 28–30, 2022, it focuses on innovation in mechanical engineering, spanning from advanced materials and composites, optimization of manufacturing and production processes, and converging issues and technologies in additive manufacturing and industry 4.0. It covers applications in the transport and automotive, and medical and education sector, among others. This book, which belongs to a three-volume set, provides engineering researchers and professionals with extensive and timely information on new technologies and developments in the field of mechanical engineering and materials.
Download or read book Computer Aided Injection Mold Design and Manufacture written by J.Y.H. Fuh and published by CRC Press. This book was released on 2004-08-02 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examining processes that affect more than 70 percent of consumer products ranging from computers to medical devices and automobiles, this reference presents the latest research in automated plastic injection and die casting mold design and manufacture. It analyzes many industrial examples and methodologies while focusing on the algorithms, implementation procedures, and system architectures that will lead to a fully automated or semi-automated computer-aided injection mold design system (CADIMDS). This invaluable guide in this challenging area of precision engineering summarizes key findings and innovations from the authors' many years of research on intelligent mold design technologies.
Download or read book Intelligent Mold design Tool for Plastic Injection Molding written by Jagannath S. Yammada and published by . This book was released on 2002 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Injection Molding Handbook written by D.V. Rosato and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1484 pages. Available in PDF, EPUB and Kindle. Book excerpt: This third edition has been written to thoroughly update the coverage of injection molding in the World of Plastics. There have been changes, including extensive additions, to over 50% of the content of the second edition. Many examples are provided of processing different plastics and relating the results to critiCal factors, which range from product design to meeting performance requirements to reducing costs to zero-defect targets. Changes have not been made that concern what is basic to injection molding. However, more basic information has been added concerning present and future developments, resulting in the book being more useful for a long time to come. Detailed explanations and interpretation of individual subjects (more than 1500) are provided, using a total of 914 figures and 209 tables. Throughout the book there is extensive information on problems and solutions as well as extensive cross referencing on its many different subjects. This book represents the ENCYCLOPEDIA on IM, as is evident from its extensive and detailed text that follows from its lengthy Table of CONTENTS and INDEX with over 5200 entries. The worldwide industry encompasses many hundreds of useful plastic-related computer programs. This book lists these programs (ranging from operational training to product design to molding to marketing) and explains them briefly, but no program or series of programs can provide the details obtained and the extent of information contained in this single sourcebook.
Download or read book Intelligent Manufacturing and Mechatronics written by Zamberi Jamaludin and published by Springer. This book was released on 2019-07-03 with total page 613 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of SympoSIMM 2019, the 2nd edition of the Symposium on Intelligent Manufacturing and Mechatronics. Focusing on “Strengthening Innovations Towards Industry 4.0”, the book presents studies on the details of Industry 4.0’s current trends. Divided into five parts covering various areas of manufacturing engineering and mechatronics stream, namely, artificial intelligence, instrumentation and controls, intelligent manufacturing, modelling and simulation, and robotics., the book is a valuable resource for readers wishing to embrace the new era of Industry 4.0.
Download or read book Injection Molding Process Control Monitoring and Optimization written by Yi Yang and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2017-04-10 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: Improvement of injection molding processes remains a topic of great interest in both industry and research institutions. This book introduces the analysis of the molding process from a systems technology point of view. It is divided into four parts: the first part provides general background to introduce the injection molding process, the second covers the control of the process, the third is on the monitoring technology, and the fourth is concerned with the optimization of the process. Most the results within are from real engineering implementations and experimental tests.
Download or read book Advanced Manufacturing and Information Engineering Intelligent Instrumentation and Industry Development written by J.Z. Ma and published by Trans Tech Publications Ltd. This book was released on 2014-08-11 with total page 4066 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of selected, peer reviewed papers from the 2014 2nd International Conference on Precision Mechanical Instruments and Measurement Technology (ICPMIMT 2014), May 30-31, 2014, Chongqing, China. The 885 papers are grouped as follows: Chapter 1: Mechanics and Dynamics, Applied Mechanics, Advanced Development in Manufacturing and Industry Engineering, Chapter 2: Mechatronics, Automation and Control, Intelligent Algorithms for Automation and Control, Chapter 3: Measurement and Instrumentation, Monitoring, Testing, Detection, Recognition and Identification Technologies, Chapter 4: Power and Electric Research, Electronics and Microelectronics, Embedded and Integrated Systems, Chapter 5: Algorithms, Computation and Information Technologies
Download or read book Intelligent Manufacturing and Mechatronics written by Mohd Najib Ali Mokhtar and published by Springer Nature. This book was released on 2022-01-24 with total page 579 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of SympoSIMM 2021, the 4th edition of the Symposium on Intelligent Manufacturing and Mechatronics. Focusing on “Strengthening Innovations Towards Industry 4.0”, the book is divided into five parts covering various areas of manufacturing engineering and mechatronics stream, namely, intelligent manufacturing and artificial intelligence, Instrumentation and control, design modelling and simulation, process and machining technology, and smart material. The book will be a valuable resource for readers wishing to embrace the new era of Industry 4.0.
Download or read book Intelligent Identification of Mold Cooling Parameters for Plastic Injection Molding written by Scott E. Everett and published by . This book was released on 2011 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Flexible Automation and Intelligent Manufacturing Establishing Bridges for More Sustainable Manufacturing Systems written by Francisco J. G. Silva and published by Springer Nature. This book was released on 2023-08-23 with total page 954 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on cutting-edge research and developments in manufacturing, giving a special emphasis to solutions fostering automation and sustainability. Topics cover manufacturing process optimization, remanufacturing, machines and mechanical design, CAD/CAM/CAE, materials characterization and processing, measurement and predictive maintenance techniques. Further topics include artificial intelligence and IoT in manufacturing, robotics, and cutting-edge issues in Industry 4.0/5.0. Based on proceedings of the 32nd edition of the International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2023, held on June 18 – 22, 2023, in Porto, Portugal, this first volume of a 2-volume set provides academics and professionals with extensive, technical information on trends and technologies in manufacturing, yet it also discusses challenges and practice-oriented experience in all the above-mentioned areas.
Download or read book Robust Process Development and Scientific Molding written by Suhas Kulkarni and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2017-01-16 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book introduces the reader to the concepts of Scientific Molding and Scientific Processing for Injection Molding, geared towards developing a robust, repeatable, and reproducible (3Rs) molding process. The effects of polymer morphology, thermal transitions, drying, and rheology on the injection molding process are explained in detail. The development of a robust molding process is broken down into two sections and is described as the Cosmetic Process and the Dimensional Process. Scientific molding procedures to establish a 3R process are provided. The concept of Design of Experiments (DOEs) for and in injection molding is explained, providing an insight into the cosmetic and dimensional process windows. A plan to release qualified molds into production with troubleshooting tips is also provided. Topics that impact a robust process such as the use of regrind, mold cooling, and venting are also described. Readers will be able to utilize the knowledge gained from the book in their day-to-day operations immediately. The second edition includes a completely new chapter on Quality Concepts, as well as much additional material throughout the book, covering fountain flow, factors affecting post mold shrinkage, and factor selections for DOEs. There are also further explanations on several topics, such as in-mold rheology curves, cavity imbalances, intensification ratios, gate seal studies, holding time optimization of hot runner molds, valve gated molds, and parts with large gates. A troubleshooting guide for common molded defects is also provided.
Download or read book Injection Mold Design Handbook written by Bruce Catoen and published by . This book was released on 2021-10-15 with total page 820 pages. Available in PDF, EPUB and Kindle. Book excerpt: An injection mold is the heart of any plastics molding workcell. Understanding the principles of an injection mold design and its importance is fundamental to the success of the product. This book takes the reader through the process of conceptualizing and designing an injection mold that will produce the desired plastic part.
