Download or read book Intelligent Fixtures for the Manufacturing of Low Rigidity Components written by Hans Christian Moehring and published by Springer. This book was released on 2017-08-28 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book summarizes the results of the European research project "Intelligent fixtures for the manufacturing of low rigidity components" (INTEFIX). The structure of the book follows the sub-projects which are dedicated to case studies within the scenarios "vibrations", "deformations" and "positioning". The INTEFIX project deals with the development and analysis of several exemplary types of intelligent, sensor and actuator integrated fixtures for the clamping of sensitive workpieces in cutting machine tools. Thus, the book gives a representative overview about this innovative field of technology. The demands of the case studies are described and the technological approaches and solutions are introduced. Furthermore, innovative methods for the design and optimization of intelligent fixtures are presented.
Download or read book Italian Manufacturing Association Conference written by Luigi Maria Galantucci and published by Materials Research Forum LLC. This book was released on 2023-10-15 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents new advances in the field of manufacturing technologies. It focuses on the design and engineering of manufacturing processes; additive manufacturing and reverse engineering; assembly, disassembly and circular processes; system simulation, optimization and digital manufacturing; and materials processing technology. Keywords: Human Robot, Short Term Production Planning, Thermoplastic Composite Components, Compostable Materials, Diffusion Bonding, Superplastic Forming, Hardening Technologies, Physical Simulation Tests, Numerical Model, Dissimilar Material Welding, Additive Manufacturing, Laser Powder Bed Fusion, Fused Deposition Modeling, Laser Sintering, Fused Filament Fabrication, Manufacturing System Laser Welding, Wind Blades, Bandsaw Machine, PVC Tubes, Submerged Arc Welding, Multi-Layered Coatings, Cryogenics, Metal Piercing, Picosecond Laser Processing, Carbon Nanotube; Fiber Reinforced Composites, Tools With Complex Geometry. Carbon/Epoxy Composite, Rheological Additives, PP/flax Fibers, Human Well-being, Extruded Rods & Pipes, Laser Welding, E-mobility, WAAM Process, Glass Fiber.
Download or read book Twin Control written by Mikel Armendia and published by Springer. This book was released on 2019-01-05 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book summarizes the results of the European research project “Twin-model based virtual manufacturing for machine tool-process simulation and control” (Twin-Control). The first part reviews the applications of ICTs in machine tools and manufacturing, from a scientific and industrial point of view, and introduces the Twin-Control approach, while Part 2 discusses the development of a digital twin of machine tools. The third part addresses the monitoring and data management infrastructure of machines and manufacturing processes and numerous applications of energy monitoring. Part 4 then highlights various features developed in the project by combining the developments covered in Parts 3 and 4 to control the manufacturing processes applying the so-called CPSs. Lastly, Part 5 presents a complete validation of Twin-Control features in two key industrial sectors: aerospace and automotive. The book offers a representative overview of the latest trends in the manufacturing industry, with a focus on machine tools.
Download or read book Proceedings of ICDMC 2019 written by Lung-Jieh Yang and published by Springer Nature. This book was released on 2020-06-01 with total page 641 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select proceedings of the International Conference on Design, Materials, Cryogenics and Constructions (ICDMC 2019). The chapters cover latest research in different areas of mechanical engineering such as additive manufacturing, automation in industry and agriculture, combustion and emission control, CFD, finite element analysis, and engineering design. The book also focuses on cryogenic systems and low-temperature materials for cost-effective and energy-efficient solutions to current challenges in the manufacturing sector. Given its contents, the book can be useful for students, academics, and practitioners.
Download or read book Computer Aided Fixture Design written by Yiming (Kevin) Rong and published by CRC Press. This book was released on 1999-04-20 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: Illustrates recently developed fixture design and verification technology, focusing on their central role in manufacturing processes. The text uses up-to-date computer technology to minimize costs, increase productivity and assure product quality. It presents advanced data and analysis that is directly applicable to development of comprehensive com
Download or read book Manufacturing Automation written by Yusuf Altintas and published by Cambridge University Press. This book was released on 2012-01-16 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal cutting is widely used in producing manufactured products. The technology has advanced considerably along with new materials, computers and sensors. This new edition considers the scientific principles of metal cutting and their practical application to manufacturing problems. It begins with metal cutting mechanics, principles of vibration and experimental modal analysis applied to solving shop floor problems. There is in-depth coverage of chatter vibrations, a problem experienced daily by manufacturing engineers. Programming, design and automation of CNC (computer numerical control) machine tools, NC (numerical control) programming and CAD/CAM technology are discussed. The text also covers the selection of drive actuators, feedback sensors, modelling and control of feed drives, the design of real time trajectory generation and interpolation algorithms and CNC-oriented error analysis in detail. Each chapter includes examples drawn from industry, design projects and homework problems. This is ideal for advanced undergraduate and graduate students and also practising engineers.
Download or read book Fundamentals of Digital Manufacturing Science written by Zude Zhou and published by Springer Science & Business Media. This book was released on 2011-10-22 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: The manufacturing industry will reap significant benefits from encouraging the development of digital manufacturing science and technology. Digital Manufacturing Science uses theorems, illustrations and tables to introduce the definition, theory architecture, main content, and key technologies of digital manufacturing science. Readers will be able to develop an in-depth understanding of the emergence and the development, the theoretical background, and the techniques and methods of digital manufacturing science. Furthermore, they will also be able to use the basic theories and key technologies described in Digital Manufacturing Science to solve practical engineering problems in modern manufacturing processes. Digital Manufacturing Science is aimed at advanced undergraduate and postgraduate students, academic researchers and researchers in the manufacturing industry. It allows readers to integrate the theories and technologies described with their own research works, and to propose new ideas and new methods to improve the theory and application of digital manufacturing science.
Download or read book Annals of Scientific Society for Assembly Handling and Industrial Robotics 2021 written by Thorsten Schüppstuhl and published by Springer Nature. This book was released on 2021 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Open Access proceedings presents a good overview of the current research landscape of assembly, handling and industrial robotics. The objective of MHI Colloquium is the successful networking at both academic and management level. Thereby, the colloquium focuses an academic exchange at a high level in order to distribute the obtained research results, to determine synergy effects and trends, to connect the actors in person and in conclusion, to strengthen the research field as well as the MHI community. In addition, there is the possibility to become acquatined with the organizing institute. Primary audience is formed by members of the scientific society for assembly, handling and industrial robotics (WGMHI). The Editors Prof. Dr.-Ing. Thorsten Schüppstuhl is head of the Institute of Aircraft Production Technology (IFPT) at the Hamburg University of Technology. Prof. Dr.-Ing. Kirsten Tracht is head of the Bremen Institute for Mechanical Engineering (bime) at the University of Bremen. Prof. Dr.-Ing. Annika Raatz is head of the Institute of Assembly Technology (match) at the Leibniz University Hannover.
Download or read book Iron Trade Review written by and published by . This book was released on 1902 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Program and Abstracts of Papers Annual Meeting written by American Society of Mechanical Engineers and published by . This book was released on 1933 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Production written by and published by . This book was released on 1963 with total page 996 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering written by and published by . This book was released on 1902 with total page 1104 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Industry 4 1 written by Fan-Tien Cheng and published by John Wiley & Sons. This book was released on 2021-10-26 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industry 4.1 Intelligent Manufacturing with Zero Defects Discover the future of manufacturing with this comprehensive introduction to Industry 4.0 technologies from a celebrated expert in the field Industry 4.1: Intelligent Manufacturing with Zero Defects delivers an in-depth exploration of the functions of intelligent manufacturing and its applications and implementations through the Intelligent Factory Automation (iFA) System Platform. The book’s distinguished editor offers readers a broad range of resources that educate and enlighten on topics as diverse as the Internet of Things, edge computing, cloud computing, and cyber-physical systems. You’ll learn about three different advanced prediction technologies: Automatic Virtual Metrology (AVM), Intelligent Yield Management (IYM), and Intelligent Predictive Maintenance (IPM). Different use cases in a variety of manufacturing industries are covered, including both high-tech and traditional areas. In addition to providing a broad view of intelligent manufacturing and covering fundamental technologies like sensors, communication standards, and container technologies, the book offers access to experimental data through the IEEE DataPort. Finally, it shows readers how to build an intelligent manufacturing platform called an Advanced Manufacturing Cloud of Things (AMCoT). Readers will also learn from: An introduction to the evolution of automation and development strategy of intelligent manufacturing A comprehensive discussion of foundational concepts in sensors, communication standards, and container technologies An exploration of the applications of the Internet of Things, edge computing, and cloud computing The Intelligent Factory Automation (iFA) System Platform and its applications and implementations A variety of use cases of intelligent manufacturing, from industries like flat-panel, semiconductor, solar cell, automotive, aerospace, chemical, and blow molding machine Perfect for researchers, engineers, scientists, professionals, and students who are interested in the ongoing evolution of Industry 4.0 and beyond, Industry 4.1: Intelligent Manufacturing with Zero Defects will also win a place in the library of laypersons interested in intelligent manufacturing applications and concepts. Completely unique, this book shows readers how Industry 4.0 technologies can be applied to achieve the goal of Zero Defects for all product
Download or read book Advanced Design and Manufacturing Based on STEP written by Xun Xu and published by Springer Science & Business Media. This book was released on 2009-09-29 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and manufacturing is the essential element in any product development lifecycle. Industry vendors and users have been seeking a common language to be used for the entire product development lifecycle that can describe design, manufacturing and other data pertaining to the product. Many solutions were proposed, the most successful being the Stadndard for Exchange of Product model (STEP). STEP provides a mechanism that is capable of describing product data, independent from any particular system. The nature of this description makes it suitable not only for neutral file exchange, but also as a basis for implementing, sharing and archiving product databases. ISO 10303-AP203 is the first and perhaps the most successful AP developed to exchange design data between different CAD systems. Going from geometric data (as in AP203) to features (as in AP224) represents an important step towards having the right type of data in a STEP-based CAD/CAM system. Of particular significance is the publication of STEP-NC, as an extension of STEP to NC, utilising feature-based concepts for CNC machining purposes. The aim of this book is to provide a snapshot of the recent research outcomes and implementation cases in the field of design and manufacturing where STEP is used as the primary data representation protocol. The 20 chapters are contributed by authors from most of the top research teams in the world. These research teams are based in national research institutes, industries as well as universities.
Download or read book Global Design to Gain a Competitive Edge written by Xiu-Tian Yan and published by Springer Science & Business Media. This book was released on 2008-07-30 with total page 870 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent rapid globalisation of manufacturing industries leads to a drive and thirst for rapid advancements in technological development and expertise in the fields of advanced design and manufacturing, especially at their interfaces. This development results in many economical benefits to and improvement of quality of life for many people all over the world. Technically speaking, this rapid development also create many opportunities and challenges for both industrialists and academics, as the design requirements and constraints have completely changed in this global design and manufacture environment. Consequently the way to design, manufacture and realise products have changed as well. The days of designing for a local market and using local suppliers in manufacturing have gone, if enterprises aim to maintain their competitiveness and global expansion leading to further success. In this global context and scenario, both industry and the academia have an urgent need to equip themselves with the latest knowledge, technology and methods developed for engineering design and manufacture. To address this shift in engineering design and manufacture, supported by the European Commission under the Asia Link Programme with a project title FASTAHEAD (A Framework Approach to Strengthening Asian Higher Education in Advanced Design and Manufacture), three key project partners, namely the University of Strathclyde of the United Kingdom, Northwestern Polytechncial University of China, and the Troyes University of Technology of France organised a third international conference.
Download or read book American Machinist Automated Manufacturing written by and published by . This book was released on 1952-11 with total page 2342 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metal Worker Plumber and Steam Fitter written by and published by . This book was released on 1876 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt:
