Download or read book Fault Diagnosis and Reconfiguration in Flight Control Systems written by C. Hajiyev and published by Springer Science & Business Media. This book was released on 2013-12-01 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: The problem of fault diagnosis and reconfigurable control is a new and actually developing field of science and engineering. The subject becomes more interesting since there is an increasing demand for the navigation and control systems of aerospace vehicles, automated actuators etc. to be more safe and reliable. Nowadays, the problems of fault detection and isolation and reconfigurable control attract the attention the scientists in the world. The subject is emphasized in the recent international congresses such as IF AC World Congresses (San Francisco-1996, Beijing-1999, and Barcelona-2002) and lMEKO World Congresses (Tampere-1997, Osaka-1999, Vienna-2000), and also in the international conferences on fault diagnosis such as SAFEPROCESS Conferences (Hull-1997, Budapest-2000). The presented methods in the book are based on linear and nonlinear dynamic mathematical models of the systems. Technical objects and systems stated by these models are very large, and include various control systems, actuators, sensors, computer systems, communication systems, and mechanical, hydraulic, pneumatic, electrical and electronic devices. The analytical fault diagnosis techniques of these objects have been developed for several decades. Many of those techniques are based on the use of the results of modem control theory. This is natural, because it is known that fault diagnosis process in control systems is considered as a part of general control process. xxii In organization of fault diagnosis of control systems, the use of the concepts and methods of modem control theory including concepts of state space, modeling, controllability, observability, estimation, identification, and filtering is very efficient.
Download or read book Fault Diagnosis and Fault Tolerant Control and Guidance for Aerospace Vehicles written by Ali Zolghadri and published by Springer Science & Business Media. This book was released on 2013-10-07 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fault Diagnosis and Fault-Tolerant Control and Guidance for Aerospace demonstrates the attractive potential of recent developments in control for resolving such issues as flight performance, self protection and extended-life structures. Importantly, the text deals with a number of practically significant considerations: tuning, complexity of design, real-time capability, evaluation of worst-case performance, robustness in harsh environments, and extensibility when development or adaptation is required. Coverage of such issues helps to draw the advanced concepts arising from academic research back towards the technological concerns of industry. Initial coverage of basic definitions and ideas and a literature review gives way to a treatment of electrical flight control system failures: oscillatory failure, runaway, and jamming. Advanced fault detection and diagnosis for linear and linear-parameter-varying systems are described. Lastly recovery strategies appropriate to remaining actuator/sensor/communications resources are developed. The authors exploit experience gained in research collaboration with academic and major industrial partners to validate advanced fault diagnosis and fault-tolerant control techniques with realistic benchmarks or real-world aeronautical and space systems. Consequently, the results presented in Fault Diagnosis and Fault-Tolerant Control and Guidance for Aerospace, will be of interest in both academic and aerospatial-industrial milieux.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1993 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Intelligent Fault Diagnosis and Accommodation Control written by Sunan Huang and published by CRC Press. This book was released on 2020-03-17 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control systems include many components, such as transducers, sensors, actuators and mechanical parts. These components are required to be operated under some specific conditions. However, due to prolonged operations or harsh operating environment, the properties of these devices may degrade to an unacceptable level, causing more regular fault occurrences. It is therefore necessary to diagnose faults and provide the fault-accommodation control which compensates for the fault of the component by substituting a configuration of redundant elements so that the system continues to operate satisfactorily. In this book, we present a result of several years of work in the area of fault diagnosis and fault-accommodation control. It aims at information estimate methods when faults occur. The book uses the model built from the plant or process, to detect and isolate failures, in contrast to traditional hardware or statistical technologies dealing with failures. It presents model-based learning and design technologies for fault detection, isolation and identification as well as fault-tolerant control. These models are also used to analyse the fault detectability and isolability conditions and discuss the stability of the closed-loop system. It is intended to report new technologies in the area of fault diagnosis, covering fault analysis and control strategies of design for various applications. The book addresses four main schemes: modelling of actuator or sensor faults; fault detection and isolation; fault identification, and fault reconfiguration (accommodation) control. It also covers application issues in the monitoring control of actuators, providing several interesting case studies for more application-oriented readers.
Download or read book Monthly Catalogue United States Public Documents written by and published by . This book was released on 1994 with total page 1064 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Monthly Catalog of United States Government Publications written by and published by . This book was released on 1994 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fault Diagnosis and Reconfiguration in Flight Control Systems written by Chingiz Hajiyev and published by . This book was released on 2014-09-01 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fault Tolerant Flight Control written by Christopher Edwards and published by Springer Science & Business Media. This book was released on 2010-06-29 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by leading experts in the field, this book provides the state-of-the-art in terms of fault tolerant control applicable to civil aircraft. The book consists of five parts and includes online material.
Download or read book Fault Diagnosis and Fault Tolerant Control and Guidance for Aerospace Vehicles written by ali Zolghadri and published by Springer. This book was released on 2013-11-27 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fault Diagnosis and Fault-Tolerant Control and Guidance for Aerospace demonstrates the attractive potential of recent developments in control for resolving such issues as flight performance, self protection and extended-life structures. Importantly, the text deals with a number of practically significant considerations: tuning, complexity of design, real-time capability, evaluation of worst-case performance, robustness in harsh environments, and extensibility when development or adaptation is required. Coverage of such issues helps to draw the advanced concepts arising from academic research back towards the technological concerns of industry. Initial coverage of basic definitions and ideas and a literature review gives way to a treatment of electrical flight control system failures: oscillatory failure, runaway, and jamming. Advanced fault detection and diagnosis for linear and linear-parameter-varying systems are described. Lastly recovery strategies appropriate to remaining actuator/sensor/communications resources are developed. The authors exploit experience gained in research collaboration with academic and major industrial partners to validate advanced fault diagnosis and fault-tolerant control techniques with realistic benchmarks or real-world aeronautical and space systems. Consequently, the results presented in Fault Diagnosis and Fault-Tolerant Control and Guidance for Aerospace, will be of interest in both academic and aerospatial-industrial milieux.
Download or read book Electro Mechanical Actuators for the More Electric Aircraft written by Mirko Mazzoleni and published by Springer Nature. This book was released on 2021-01-19 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent results on fault diagnosis and condition monitoring of airborne electromechanical actuators, illustrating both algorithmic and hardware design solutions to enhance the reliability of onboard more electric aircraft. The book begins with an introduction to the current trends in the development of electrically powered actuation systems for aerospace applications. Practical examples are proposed to help present approaches to reliability, availability, maintainability and safety analysis of airborne equipment. The terminology and main strategies for fault diagnosis and condition monitoring are then reviewed. The core of the book focuses on the presentation of relevant case studies of fault diagnosis and monitoring design for airborne electromechanical actuators, using different techniques. The last part of the book is devoted to a summary of lessons learned and practical suggestions for the design of fault diagnosis solutions of complex airborne systems. The book is written with the idea of providing practical guidelines on the development of fault diagnosis and monitoring algorithms for airborne electromechanical actuators. It will be of interest to practitioners in aerospace, mechanical, electronic, reliability and systems engineering, as well as researchers and postgraduates interested in dynamical systems, automatic control and safety-critical systems. Advances in Industrial Control reports and encourages the transfer of technology in control engineering. The rapid development of control technology has an impact on all areas of the control discipline. The series offers an opportunity for researchers to present an extended exposition of new work in all aspects of industrial control.
Download or read book Fault tolerant Flight Control and Guidance Systems written by Guillaume J. J. Ducard and published by Springer Science & Business Media. This book was released on 2009-05-14 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a complete overview of fault-tolerant flight control techniques. Discussion covers the necessary equations for the modeling of small UAVs, a complete system based on extended Kalman filters, and a nonlinear flight control and guidance system.
Download or read book Government Reports Annual Index written by and published by . This book was released on 1989 with total page 1148 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fault Diagnosis and Fault Tolerance for Mechatronic Systems Recent Advances written by Fabrizio Caccavale and published by Springer Science & Business Media. This book was released on 2002-10-09 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will play a central role in ensuring safe and reliable behaviour of intelligent and autonomous systems. It collects some of the most recent results in fault diagnosis and fault tolerant systems, with particular emphasis on mechatronic systems.
Download or read book Fault Tolerant Control of Large Civil Aircraft written by Xingjian Wang and published by Springer Nature. This book was released on with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Government Reports Announcements Index written by and published by . This book was released on 1989 with total page 1106 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aeronautical Engineering written by and published by . This book was released on 1991 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fault Identification for Real Time Flight Controller Reconfiguration written by Jayalakshmi Nagam and published by . This book was released on 2023-01-14 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fault Identification for Real Time Flight Controller Reconfiguration refers to the process of detecting, diagnosing, and mitigating faults in a flight control system in real-time. This is crucial for ensuring the safety and performance of aircraft. The process involves monitoring sensor data and analyzing it to detect any anomalies or failures in the system. Once a fault is detected, a diagnosis is performed to determine the cause of the fault and the appropriate reconfiguration strategy is implemented to mitigate its effects. This can include switching to redundant systems, adjusting control parameters, or other adaptive control techniques. The goal is to maintain the safe and stable operation of the aircraft while minimizing any impact on performance. Flight controller reconfiguration refers to the process of adapting the control system of an aircraft to changing conditions or system failures. The goal is to maintain the safe and stable operation of the aircraft while minimizing any impact on performance. This can be achieved through a variety of methods such as switching to redundant systems, adjusting control parameters, or implementing other adaptive control techniques. The process of reconfiguration may be triggered by a variety of factors, including system failures, changes in flight conditions, or the need to optimize performance. The reconfiguration process is typically performed in real-time and can be based on both model-based and data-driven approaches. A key aspect of flight controller reconfiguration is the ability to detect and diagnose faults in the system and to implement the appropriate reconfiguration strategy to mitigate their effects. Fault Tolerant Flight Control (FTFC) systems deal with the detection and diagnosis of faults and look at the task of regaining control in the presence of the fault. Some faults are difficult to detect with the onboard monitoring systems, with the result that these faults endanger the safety and reliability of an aircraft. The study of improvement in safety, redundancy, and adapting the Flight Control Laws (FCL) after the occurrence of faults has fascinated several investigators in the previous two decades. The literature study illustrates different fault diagnosis and FTFC approaches. The main research direction is to detect and isolate fault reliably, carry out real-time identification of the plant, and real-time control law (CLAW) reconfiguration. The main contribution of this thesis is towards these aspects. In this chapter, the basic terminologies are explained. The research work carried out in this thesis is in the area of FTFC systems.
