Download or read book Intelligent Fault Diagnosis and Accommodation Control written by Sunan Huang and published by CRC Press. This book was released on 2020-03-17 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control systems include many components, such as transducers, sensors, actuators and mechanical parts. These components are required to be operated under some specific conditions. However, due to prolonged operations or harsh operating environment, the properties of these devices may degrade to an unacceptable level, causing more regular fault occurrences. It is therefore necessary to diagnose faults and provide the fault-accommodation control which compensates for the fault of the component by substituting a configuration of redundant elements so that the system continues to operate satisfactorily. In this book, we present a result of several years of work in the area of fault diagnosis and fault-accommodation control. It aims at information estimate methods when faults occur. The book uses the model built from the plant or process, to detect and isolate failures, in contrast to traditional hardware or statistical technologies dealing with failures. It presents model-based learning and design technologies for fault detection, isolation and identification as well as fault-tolerant control. These models are also used to analyse the fault detectability and isolability conditions and discuss the stability of the closed-loop system. It is intended to report new technologies in the area of fault diagnosis, covering fault analysis and control strategies of design for various applications. The book addresses four main schemes: modelling of actuator or sensor faults; fault detection and isolation; fault identification, and fault reconfiguration (accommodation) control. It also covers application issues in the monitoring control of actuators, providing several interesting case studies for more application-oriented readers.

Download or read book Intelligent Fault Diagnosis and Accommodation Control written by Sunan Huang and published by CRC Press. This book was released on 2020-03-17 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control systems include many components, such as transducers, sensors, actuators and mechanical parts. These components are required to be operated under some specific conditions. However, due to prolonged operations or harsh operating environment, the properties of these devices may degrade to an unacceptable level, causing more regular fault occurrences. It is therefore necessary to diagnose faults and provide the fault-accommodation control which compensates for the fault of the component by substituting a configuration of redundant elements so that the system continues to operate satisfactorily. In this book, we present a result of several years of work in the area of fault diagnosis and fault-accommodation control. It aims at information estimate methods when faults occur. The book uses the model built from the plant or process, to detect and isolate failures, in contrast to traditional hardware or statistical technologies dealing with failures. It presents model-based learning and design technologies for fault detection, isolation and identification as well as fault-tolerant control. These models are also used to analyse the fault detectability and isolability conditions and discuss the stability of the closed-loop system. It is intended to report new technologies in the area of fault diagnosis, covering fault analysis and control strategies of design for various applications. The book addresses four main schemes: modelling of actuator or sensor faults; fault detection and isolation; fault identification, and fault reconfiguration (accommodation) control. It also covers application issues in the monitoring control of actuators, providing several interesting case studies for more application-oriented readers.

Download or read book The Electrical Engineering Handbook written by Wai Kai Chen and published by Elsevier. This book was released on 2004-11-16 with total page 1227 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Electrical Engineer's Handbook is an invaluable reference source for all practicing electrical engineers and students. Encompassing 79 chapters, this book is intended to enlighten and refresh knowledge of the practicing engineer or to help educate engineering students. This text will most likely be the engineer’s first choice in looking for a solution; extensive, complete references to other sources are provided throughout. No other book has the breadth and depth of coverage available here. This is a must-have for all practitioners and students! The Electrical Engineer's Handbook provides the most up-to-date information in: Circuits and Networks, Electric Power Systems, Electronics, Computer-Aided Design and Optimization, VLSI Systems, Signal Processing, Digital Systems and Computer Engineering, Digital Communication and Communication Networks, Electromagnetics and Control and Systems. About the Editor-in-Chief... Wai-Kai Chen is Professor and Head Emeritus of the Department of Electrical Engineering and Computer Science at the University of Illinois at Chicago. He has extensive experience in education and industry and is very active professionally in the fields of circuits and systems. He was Editor-in-Chief of the IEEE Transactions on Circuits and Systems, Series I and II, President of the IEEE Circuits and Systems Society and is the Founding Editor and Editor-in-Chief of the Journal of Circuits, Systems and Computers. He is the recipient of the Golden Jubilee Medal, the Education Award, and the Meritorious Service Award from the IEEE Circuits and Systems Society, and the Third Millennium Medal from the IEEE. Professor Chen is a fellow of the IEEE and the American Association for the Advancement of Science. * 77 chapters encompass the entire field of electrical engineering. * THOUSANDS of valuable figures, tables, formulas, and definitions. * Extensive bibliographic references.

Download or read book Fault Diagnosis and Fault Tolerant Control Strategies for Non Linear Systems written by Marcin Witczak and published by Springer Science & Business Media. This book was released on 2013-12-11 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected fault diagnosis and fault-tolerant control strategies for non-linear systems in a unified framework. In particular, starting from advanced state estimation strategies up to modern soft computing, the discrete-time description of the system is employed Part I of the book presents original research results regarding state estimation and neural networks for robust fault diagnosis. Part II is devoted to the presentation of integrated fault diagnosis and fault-tolerant systems. It starts with a general fault-tolerant control framework, which is then extended by introducing robustness with respect to various uncertainties. Finally, it is shown how to implement the proposed framework for fuzzy systems described by the well-known Takagi–Sugeno models. This research monograph is intended for researchers, engineers, and advanced postgraduate students in control and electrical engineering, computer science, as well as mechanical and chemical engineering.

Download or read book Maneuverable Formation Control in Constrained Space written by Dongyu Li and published by CRC Press. This book was released on 2024-05-14 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: Inspired by the community behaviors of animals and humans, cooperative control has been intensively studied by numerous researchers in recent years. Cooperative control aims to build a network system collectively driven by a global objective function in a distributed or centralized communication network and shows great application potential in a wide domain. From the perspective of cybernetics in network system cooperation, one of the main tasks is to design the formation control scheme for multiple intelligent unmanned systems, facilitating the achievements of hazardous missions – e.g., deep space exploration, cooperative military operation, and collaborative transportation. Various challenges in such real-world applications are driving the proposal of advanced formation control design, which is to be addressed to bring academic achievements into real industrial scenarios. This book extends the performance of formation control beyond classical dynamic or stationary geometric configurations, focusing on formation maneuverability that enables cooperative systems to keep suitable spacial configurations during agile maneuvers. This book embarks on an adventurous journey of maneuverable formation control in constrained space with limited resources, to accomplish the exploration of an unknown environment. The investigation of the real-world challenges, including model uncertainties, measurement inaccuracy, input saturation, output constraints, and spatial collision avoidance, brings the value of this book into the practical industry, rather than being limited to academics.

Download or read book Variable Gain Control and Its Applications in Energy Conversion written by Chenghui Zhang and published by CRC Press. This book was released on 2023-02-22 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: The variable gain control method is a new construction technique for the control of nonlinear systems. By properly conducting state transformation that depends on the variable gains, the control design problem of nonlinear systems can be transformed into a gain construction problem, thus effectively avoiding the tedious iterative design procedure. Different from the classical backstepping method and forwarding design method, the structure of variable gain control is simpler in the sense that fewer design parameters are required, facilitating the improvement of system control performance. To highlight the learning, research, and promotion of variable gain control, Variable Gain Control and Its Applications in Energy Conversion is written based on the research results of peers at home and abroad and combining our latest research. This book presents innovative technologies for designing variable gain controllers for nonlinear systems. It systematically describes the origin and principles of variable gain control for nonlinear systems, focuses on the controller design and stability analysis, and reflects the latest research. In addition, variable gain control methods applied to energy conversion are also included. Discussion remarks are provided in each chapter highlighting new approaches and contributions to emphasize the novelty of the presented design and analysis methods. In addition, simulation results are given in each chapter to show the effectiveness of these methods. It can be used as a reference book or a textbook for students with some background in feedback control systems. Researchers, graduate students, and engineers in the fields of control, information, renewable energy generation, electrical engineering, mechanical engineering, applied mathematics, and others will benefit from this book.

Download or read book Control of Nonlinear Systems written by Yongduan Song and published by CRC Press. This book was released on 2024-08-14 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book Control of Nonlinear Systems–Stability and Performance fills a crucial gap in the field of nonlinear control systems by providing a comprehensive yet accessible treatment of the subject. Unlike many existing texts that are either too complex for beginners or omit essential topics, this book strikes the right balance of mathematical rigor and practicality. The main objective of the book is to simplify and unify the existing techniques for designing and analyzing control systems for nonlinear systems. It aims to alleviate confusion and difficulty in understanding these methods, making it an invaluable resource for students, researchers, and practitioners in the field. By presenting the material in a tutorial manner, the book enhances the reader's understanding of the design and analysis of a wide range of control methods for nonlinear systems. The emphasis on stability and performance highlights the practical relevance of the concepts discussed in the book. Overall, Control of Nonlinear Systems–Stability and Performance is a valuable contribution to the field of nonlinear control systems. Its emphasis on practical applications and its accessible presentation make it an indispensable resource for engineers seeking to enhance their knowledge and skills in this important area of control theory.

Download or read book Nonlinear Pinning Control of Complex Dynamical Networks written by Edgar N. Sanchez and published by CRC Press. This book was released on 2021-08-19 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents two nonlinear control strategies for complex dynamical networks. First, sliding-mode control is used, and then the inverse optimal control approach is employed. For both cases, model-based is considered in Chapter 3 and Chapter 5; then, Chapter 4 and Chapter 6 are based on determining a model for the unknow system using a recurrent neural network, using on-line extended Kalman filtering for learning. The book is organized in four sections. The first one covers mathematical preliminaries, with a brief review for complex networks, and the pinning methodology. Additionally, sliding-mode control and inverse optimal control are introduced. Neural network structures are also discussed along with a description of the high-order ones. The second section presents the analysis and simulation results for sliding-mode control for identical as well as non-identical nodes. The third section describes analysis and simulation results for inverse optimal control considering identical or non-identical nodes. Finally, the last section presents applications of these schemes, using gene regulatory networks and microgrids as examples.

Download or read book Optimal Event Triggered Control Using Adaptive Dynamic Programming written by Sarangapani Jagannathan and published by CRC Press. This book was released on 2024-06-21 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimal Event-triggered Control using Adaptive Dynamic Programming discusses event triggered controller design which includes optimal control and event sampling design for linear and nonlinear dynamic systems including networked control systems (NCS) when the system dynamics are both known and uncertain. The NCS are a first step to realize cyber-physical systems (CPS) or industry 4.0 vision. The authors apply several powerful modern control techniques to the design of event-triggered controllers and derive event-trigger condition and demonstrate closed-loop stability. Detailed derivations, rigorous stability proofs, computer simulation examples, and downloadable MATLAB® codes are included for each case. The book begins by providing background on linear and nonlinear systems, NCS, networked imperfections, distributed systems, adaptive dynamic programming and optimal control, stability theory, and optimal adaptive event-triggered controller design in continuous-time and discrete-time for linear, nonlinear and distributed systems. It lays the foundation for reinforcement learning-based optimal adaptive controller use for infinite horizons. The text then: Introduces event triggered control of linear and nonlinear systems, describing the design of adaptive controllers for them Presents neural network-based optimal adaptive control and game theoretic formulation of linear and nonlinear systems enclosed by a communication network Addresses the stochastic optimal control of linear and nonlinear NCS by using neuro dynamic programming Explores optimal adaptive design for nonlinear two-player zero-sum games under communication constraints to solve optimal policy and event trigger condition Treats an event-sampled distributed linear and nonlinear systems to minimize transmission of state and control signals within the feedback loop via the communication network Covers several examples along the way and provides applications of event triggered control of robot manipulators, UAV and distributed joint optimal network scheduling and control design for wireless NCS/CPS in order to realize industry 4.0 vision An ideal textbook for senior undergraduate students, graduate students, university researchers, and practicing engineers, Optimal Event Triggered Control Design using Adaptive Dynamic Programming instills a solid understanding of neural network-based optimal controllers under event-sampling and how to build them so as to attain CPS or Industry 4.0 vision.

Download or read book Distributed Adaptive Consensus Control of Uncertain Multi Agent Systems written by Wei Wang and published by CRC Press. This book was released on 2024-08-15 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multi-agent systems are special networked systems full of research interest and practical sense, which are abundant in real life, ranging from mobile robot networks, intelligent transportation management, to multiple spacecraft, surveillance and monitoring. Consensus control is one of the most typical and hot research issues for multi-agent systems. Distributed Adaptive Consensus Control of Uncertain Multi-agent Systems provides innovative technologies to design and analyze distributed adaptive consensus for multi-agent systems with model uncertainties. Based on the basic graph theory and adaptive backstepping control, this monograph: · Describes the state of the art on distributed adaptive control, finite-time consensus control and event-triggered consensus control · Studies distributed adaptive consensus under directed communication graph condition: the methods with linearly parametric reference, hierarchical decomposition, and design of auxiliary filers · Explores adaptive finite-time consensus for uncertain nonlinear systems · Considers distributed adaptive consensus with event-triggered communication via state feedback and output feedback · Investigates distributed adaptive formation control of nonholonomic mobile robots with experimental verification · Provides distributed adaptive attitude synchronization control schemes for multiple spacecraft with event-triggered communication Distributed Adaptive Consensus Control of Uncertain Multi-agent Systems can help engineering students and professionals to efficiently learn distributed adaptive control design tool for handling uncertain multi-agent systems with directed communication graph, guaranteeing finite-time convergence and saving communication resources.

Download or read book Adaptive Control of Dynamic Systems with Uncertainty and Quantization written by Jing Zhou and published by CRC Press. This book was released on 2021-12-15 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a series of innovative technologies and research results on adaptive control of dynamic systems with quantization, uncertainty, and nonlinearity, including the theoretical success and practical development such as the approaches for stability analysis, the compensation of quantization, the treatment of subsystem interactions, and the improvement of system tracking and transient performance. Novel solutions by adopting backstepping design tools to a number of hotspots and challenging problems in the area of adaptive control are provided. In the first three chapters, the general design procedures and stability analysis of backstepping controllers and the basic descriptions and properties of quantizers are introduced as preliminary knowledge for this book. In the remainder of this book, adaptive control schemes are introduced to compensate for the effects of input quantization, state quantization, both input and state/output quantization for uncertain nonlinear systems and are applied to helicopter systems and DC Microgrid. Discussion remarks are provided in each chapter highlighting new approaches and contributions to emphasize the novelty of the presented design and analysis methods. Simulation results are also given in each chapter to show the effectiveness of these methods. This book is helpful to learn and understand the fundamental backstepping schemes for state feedback control and output feedback control. It can be used as a reference book or a textbook on adaptive quantized control for students with some background in feedback control systems. Researchers, graduate students, and engineers in the fields of control, information, and communication, electrical engineering, mechanical engineering, computer science, and others will benefit from this book.

Download or read book Robust Formation Control for Multiple Unmanned Aerial Vehicles written by Hao Liu and published by CRC Press. This book was released on 2022-12-01 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on the authors’ recent research results on formation control problems, including time-varying formation, communication delays, fault-tolerant formation for multiple UAV systems with highly nonlinear and coupled, parameter uncertainties, and external disturbances. Differentiating from existing works, this book presents a robust optimal formation approach to designing distributed cooperative control laws for a group of UAVs, based on the linear quadratic regulator control method and the robust compensation theory. The proposed control method is composed of two parts: the nominal part to achieve desired tracking performance and the robust compensation part to restrain the influence of highly nonlinear and strongly coupled parameter uncertainties, and external disturbances on the global closed-loop control system. Furthermore, this book gives proof of their robust properties. The influence of communication delays and actuator fault tolerance can be restrained by the proposed robust formation control protocol, and the formation tracking errors can converge into a neighborhood of the origin bounded by a given constant in a finite time. Moreover, the book provides details about the practical application of the proposed method to design formation control systems for multiple quadrotors and tail-sitters. Additional features include a robust control method that is proposed to address the formation control problem for UAVs and theoretical and experimental research for the cooperative flight of the quadrotor UAV group and the tail-sitter UAV group. Robust Formation Control for Multiple Unmanned Aerial Vehicles is suitable for graduate students, researchers, and engineers in the system and control community, especially those engaged in the areas of robust control, UAV swarming, and multi-agent systems.

Download or read book 2001 IEEE International Symposium on Intelligent Control written by IEEE Control Systems Society Staff and published by . This book was released on 2001-09 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Computational Intelligence written by De-Shuang Huang and published by Springer Science & Business Media. This book was released on 2006-08-04 with total page 1363 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the proceedings of the International Conference on Intelligent Computing, ICIC 2006, Kunming, China, August 2006. The book presents 165 revised full papers, carefully chosen and reviewed, organized in topical sections on fuzzy systems, fuzzy-neuro-evolutionary hybrids, supervised, unsupervised and reinforcement learning, intelligent agent and Web applications, intelligent fault diagnosis, natural language processing and expert systems, natural language human-machine interface using artificial neural networks, and intelligent financial engineering.

Download or read book Fault Detection Supervision and Safety for Technical Processes 1991 written by B. Freyermuth and published by Elsevier. This book was released on 2014-05-23 with total page 647 pages. Available in PDF, EPUB and Kindle. Book excerpt: These Proceedings provide a general overview as well as detailed information on the developing field of reliability and safety of technical processes in automatically controlled processes. The plenary papers present the state-of-the-art and an overview in the areas of aircraft and nuclear power stations, because these safety-critical system domains possess the most highly developed fault management and supervision schemes. Additional plenary papers covered the recent developments in analytical redundancy. In total there are 95 papers presented in these Proceedings.

Download or read book Intelligent Fault Diagnosis and Failure Management of Flight Control Actuation Systems written by and published by . This book was released on 1988 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Computational Intelligence in Fault Diagnosis written by Vasile Palade and published by Springer Science & Business Media. This book was released on 2006-12-22 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the most recent concerns and research results in industrial fault diagnosis using intelligent techniques. It focuses on computational intelligence applications to fault diagnosis with real-world applications used in different chapters to validate the different diagnosis methods. The book includes one chapter dealing with a novel coherent fault diagnosis distributed methodology for complex systems.