Download or read book Intelligent Control Filtering and Model Reduction Analysis for Fuzzy Model Based Systems written by Xiaojie Su and published by Springer Nature. This book was released on 2021-08-17 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to introduce the state-of-the-art research of stability/performance analysis and optimal synthesis methods for fuzzy-model-based systems. A series of problems are solved with new approaches of design, analysis and synthesis of fuzzy systems, including stabilization control and stability analysis, dynamic output feedback control, fault detection filter design, and reduced-order model approximation. Some efficient techniques, such as Lyapunov stability theory, linear matrix inequality, reciprocally convex approach, and cone complementary linearization method, are utilized in the approaches. This book is a comprehensive reference for researchers and practitioners working on intelligent control, model reduction, and fault detection of fuzzy systems, and is also a useful source of information for senior undergraduates and graduates in these areas. The readers will benefit from some new concepts and methodologies with theoretical and practical significance in system analysis and control synthesis.

Download or read book Analysis and Synthesis of Fuzzy Control Systems written by Gang Feng and published by CRC Press. This book was released on 2018-09-03 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuzzy logic control (FLC) has proven to be a popular control methodology for many complex systems in industry, and is often used with great success as an alternative to conventional control techniques. However, because it is fundamentally model free, conventional FLC suffers from a lack of tools for systematic stability analysis and controller design. To address this problem, many model-based fuzzy control approaches have been developed, with the fuzzy dynamic model or the Takagi and Sugeno (T–S) fuzzy model-based approaches receiving the greatest attention. Analysis and Synthesis of Fuzzy Control Systems: A Model-Based Approach offers a unique reference devoted to the systematic analysis and synthesis of model-based fuzzy control systems. After giving a brief review of the varieties of FLC, including the T–S fuzzy model-based control, it fully explains the fundamental concepts of fuzzy sets, fuzzy logic, and fuzzy systems. This enables the book to be self-contained and provides a basis for later chapters, which cover: T–S fuzzy modeling and identification via nonlinear models or data Stability analysis of T–S fuzzy systems Stabilization controller synthesis as well as robust H∞ and observer and output feedback controller synthesis Robust controller synthesis of uncertain T–S fuzzy systems Time-delay T–S fuzzy systems Fuzzy model predictive control Robust fuzzy filtering Adaptive control of T–S fuzzy systems A reference for scientists and engineers in systems and control, the book also serves the needs of graduate students exploring fuzzy logic control. It readily demonstrates that conventional control technology and fuzzy logic control can be elegantly combined and further developed so that disadvantages of conventional FLC can be avoided and the horizon of conventional control technology greatly extended. Many chapters feature application simulation examples and practical numerical examples based on MATLAB®.

Download or read book Control and Filtering of Fuzzy Systems with Switched Parameters written by Shanling Dong and published by Springer Nature. This book was released on 2019-11-25 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent advances in control and filter design for Takagi-Sugeno (T-S) fuzzy systems with switched parameters. Thanks to its powerful ability in transforming complicated nonlinear systems into a set of linear subsystems, the T-S fuzzy model has received considerable attention from those the field of control science and engineering. Typical applications of T-S fuzzy systems include communication networks, and mechanical and power electronics systems. Practical systems often experience abrupt variations in their parameters or structures due to outside disturbances or component failures, and random switching mechanisms have been used to model these stochastic changes, such as the Markov jump principle. There are three general types of controller/filter for fuzzy Markov jump systems: mode-independent, mode-dependent and asynchronous. Mode-independence does not focus on whether modes are accessible and ignores partially useful mode information, which results in some conservatism. The mode-dependent design approach relies on timely, complete and correct information regarding the mode of the studied plant. Factors like component failures and data dropouts often make it difficult to obtain exact mode messages, which further make the mode-dependent controllers/filters less useful. Recently, to overcome these issues, researchers have focused on asynchronous techniques. Asynchronous modes are accessed by observing the original systems based on certain probabilities. The book investigates the problems associated with controller/filter design for all three types. It also considers various networked constraints, such as data dropouts and time delays, and analyzes the performances of the systems based on Lyapunov function and matrix inequality techniques, including the stochastic stability, dissipativity, and $H_\infty$. The book not only shows how these approaches solve the control and filtering problems effectively, but also offers potential meaningful research directions and ideas. Covering a variety of fields, including continuous-time and discrete-time Markov processes, fuzzy systems, robust control, and filter design problems, the book is primarily intended for researchers in system and control theory, and is also a valuable reference resource for graduate and undergraduate students. Further, it provides cases of fuzzy control problems that are of interest to scientists, engineers and researchers in the field of intelligent control. Lastly it is useful for advanced courses focusing on fuzzy modeling, analysis, and control.

Download or read book Analysis and Synthesis for Interval Type 2 Fuzzy Model Based Systems written by Hongyi Li and published by Springer. This book was released on 2016-02-29 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book develops a set of reference methods capable of modeling uncertainties existing in membership functions, and analyzing and synthesizing the interval type-2 fuzzy systems with desired performances. It also provides numerous simulation results for various examples, which fill certain gaps in this area of research and may serve as benchmark solutions for the readers. Interval type-2 T-S fuzzy models provide a convenient and flexible method for analysis and synthesis of complex nonlinear systems with uncertainties.

Download or read book Fuzzy Control Systems Design and Analysis written by Kazuo Tanaka and published by John Wiley & Sons. This book was released on 2004-04-07 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive treatment of model-based fuzzy control systems This volume offers full coverage of the systematic framework for the stability and design of nonlinear fuzzy control systems. Building on the Takagi-Sugeno fuzzy model, authors Tanaka and Wang address a number of important issues in fuzzy control systems, including stability analysis, systematic design procedures, incorporation of performance specifications, numerical implementations, and practical applications. Issues that have not been fully treated in existing texts, such as stability analysis, systematic design, and performance analysis, are crucial to the validity and applicability of fuzzy control methodology. Fuzzy Control Systems Design and Analysis addresses these issues in the framework of parallel distributed compensation, a controller structure devised in accordance with the fuzzy model. This balanced treatment features an overview of fuzzy control, modeling, and stability analysis, as well as a section on the use of linear matrix inequalities (LMI) as an approach to fuzzy design and control. It also covers advanced topics in model-based fuzzy control systems, including modeling and control of chaotic systems. Later sections offer practical examples in the form of detailed theoretical and experimental studies of fuzzy control in robotic systems and a discussion of future directions in the field. Fuzzy Control Systems Design and Analysis offers an advanced treatment of fuzzy control that makes a useful reference for researchers and a reliable text for advanced graduate students in the field.

Download or read book Advances In Intelligent Control written by C J Harris and published by CRC Press. This book was released on 1994-03-11 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Advances in intelligent Control" is a collection of essays covering the latest research in the field. Based on a special issue of "The International Journal of Control", the book is arranged in two parts. Part one contains recent contributions of artificial neural networks to modelling and control. Part two concerns itself primarily with aspects of fuzzy logic in intelligent control, guidance and estimation, although some of the contributions either make direct equivalence relationships to neural networks or use hybrid methods where a neural network is used to develop the fuzzy rule base.

Download or read book Fuzzy Modeling and Fuzzy Control written by Huaguang Zhang and published by Springer Science & Business Media. This book was released on 2007-10-17 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuzzy logic methodology has proven effective in dealing with complex nonlinear systems containing uncertainties that are otherwise difficult to model. Technology based on this methodology is applicable to many real-world problems, especially in the area of consumer products. This book presents the first comprehensive, unified treatment of fuzzy modeling and fuzzy control, providing tools for the control of complex nonlinear systems. Coverage includes model complexity, model precision, and computing time. This is an excellent reference for electrical, computer, chemical, industrial, civil, manufacturing, mechanical and aeronautical engineers, and also useful for graduate courses in electrical engineering, computer engineering, and computer science.

Download or read book Fuzzy Modeling and Control Theory and Applications written by Fernando Matía and published by Springer. This book was released on 2014-08-14 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Much work on fuzzy control, covering research, development and applications, has been developed in Europe since the 90's. Nevertheless, the existing books in the field are compilations of articles without interconnection or logical structure or they express the personal point of view of the author. This book compiles the developments of researchers with demonstrated experience in the field of fuzzy control following a logic structure and a unified the style. The first chapters of the book are dedicated to the introduction of the main fuzzy logic techniques, where the following chapters focus on concrete applications. This book is supported by the EUSFLAT and CEA-IFAC societies, which include a large number of researchers in the field of fuzzy logic and control. The central topic of the book, Fuzzy Control, is one of the main research and development lines covered by these associations.

Download or read book Stability Analysis of Fuzzy Model Based Control Systems written by Hak-Keung Lam and published by Springer Science & Business Media. This book was released on 2011-01-27 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, the state-of-the-art fuzzy-model-based (FMB) based control approaches are covered. A comprehensive review about the stability analysis of type-1 and type-2 FMB control systems using the Lyapunov-based approach is given, presenting a clear picture to researchers who would like to work on this field. A wide variety of continuous-time nonlinear control systems such as state-feedback, switching, time-delay and sampled-data FMB control systems, are covered. In short, this book summarizes the recent contributions of the authors on the stability analysis of the FMB control systems. It discusses advanced stability analysis techniques for various FMB control systems, and founds a concrete theoretical basis to support the investigation of FMB control systems at the research level. The analysis results of this book offer various mathematical approaches to designing stable and well-performed FMB control systems. Furthermore, the results widen the applicability of the FMB control approach and help put the fuzzy controller in practice. A wide range of advanced analytical and mathematical analysis techniques will be employed to investigate the system stability and performance of FMB-based control systems in a rigorous manner. Detailed analysis and derivation steps are given to enhance the readability, enabling the readers who are unfamiliar with the FMB control systems to follow the materials easily. Simulation examples, with figures and plots of system responses, are given to demonstrate the effectiveness of the proposed FMB control approaches.

Download or read book Fuzzy Logic Control written by H. B. Verbruggen and published by World Scientific. This book was released on 1999 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuzzy logic control has become an important methodology in control engineering. This volume deals with applications of fuzzy logic control in various domains. The contributions are divided into three parts. The first part consists of two state-of-the-art tutorials on fuzzy control and fuzzy modeling. Surveys of advanced methodologies are included in the second part. These surveys address fuzzy decision making and control, fault detection, isolation and diagnosis, complexity reduction in fuzzy systems and neuro-fuzzy methods. The third part contains application-oriented contributions from various fields, such as process industry, cement and ceramics, vehicle control and traffic management, electromechanical and production systems, avionics, biotechnology and medical applications. The book is intended for researchers both from the academic world and from industry.

Download or read book Intelligent Control Systems Using Computational Intelligence Techniques written by A.E. Ruano and published by IET. This book was released on 2005-07-18 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intelligent Control techniques are becoming important tools in both academia and industry. Methodologies developed in the field of soft-computing, such as neural networks, fuzzy systems and evolutionary computation, can lead to accommodation of more complex processes, improved performance and considerable time savings and cost reductions. Intelligent Control Systems using Computational Intellingence Techniques details the application of these tools to the field of control systems. Each chapter gives and overview of current approaches in the topic covered, with a set of the most important references in the field, and then details the author's approach, examining both the theory and practical applications.

Download or read book Type 2 Fuzzy Logic written by Rómulo Antão and published by Springer. This book was released on 2017-07-23 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on a particular domain of Type-2 Fuzzy Logic, related to process modeling and control applications. It deepens readers’understanding of Type-2 Fuzzy Logic with regard to the following three topics: using simpler methods to train a Type-2 Takagi-Sugeno Fuzzy Model; using the principles of Type-2 Fuzzy Logic to reduce the influence of modeling uncertainties on a locally linear n-step ahead predictor; and developing model-based control algorithms according to the Generalized Predictive Control principles using Type-2 Fuzzy Sets. Throughout the book, theory is always complemented with practical applications and readers are invited to take their learning process one step farther and implement their own applications using the algorithms’ source codes (provided). As such, the book offers avaluable referenceguide for allengineers and researchers in the field ofcomputer science who are interested in intelligent systems, rule-based systems and modeling uncertainty.

Download or read book Fuzzy Modeling for Control written by Robert Babuška and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rule-based fuzzy modeling has been recognised as a powerful technique for the modeling of partly-known nonlinear systems. Fuzzy models can effectively integrate information from different sources, such as physical laws, empirical models, measurements and heuristics. Application areas of fuzzy models include prediction, decision support, system analysis, control design, etc. Fuzzy Modeling for Control addresses fuzzy modeling from the systems and control engineering points of view. It focuses on the selection of appropriate model structures, on the acquisition of dynamic fuzzy models from process measurements (fuzzy identification), and on the design of nonlinear controllers based on fuzzy models. To automatically generate fuzzy models from measurements, a comprehensive methodology is developed which employs fuzzy clustering techniques to partition the available data into subsets characterized by locally linear behaviour. The relationships between the presented identification method and linear regression are exploited, allowing for the combination of fuzzy logic techniques with standard system identification tools. Attention is paid to the trade-off between the accuracy and transparency of the obtained fuzzy models. Control design based on a fuzzy model of a nonlinear dynamic process is addressed, using the concepts of model-based predictive control and internal model control with an inverted fuzzy model. To this end, methods to exactly invert specific types of fuzzy models are presented. In the context of predictive control, branch-and-bound optimization is applied. The main features of the presented techniques are illustrated by means of simple examples. In addition, three real-world applications are described. Finally, software tools for building fuzzy models from measurements are available from the author.

Download or read book Fuzzy Systems written by Hung T. Nguyen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: The analysis and control of complex systems have been the main motivation for the emergence of fuzzy set theory since its inception. It is also a major research field where many applications, especially industrial ones, have made fuzzy logic famous. This unique handbook is devoted to an extensive, organized, and up-to-date presentation of fuzzy systems engineering methods. The book includes detailed material and extensive bibliographies, written by leading experts in the field, on topics such as: Use of fuzzy logic in various control systems. Fuzzy rule-based modeling and its universal approximation properties. Learning and tuning techniques for fuzzy models, using neural networks and genetic algorithms. Fuzzy control methods, including issues such as stability analysis and design techniques, as well as the relationship with traditional linear control. Fuzzy sets relation to the study of chaotic systems, and the fuzzy extension of set-valued approaches to systems modeling through the use of differential inclusions. Fuzzy Systems: Modeling and Control is part of The Handbooks of Fuzzy Sets Series. The series provides a complete picture of contemporary fuzzy set theory and its applications. This volume is a key reference for systems engineers and scientists seeking a guide to the vast amount of literature in fuzzy logic modeling and control.

Download or read book Fuzzy Decision Making in Modeling and Control written by Joao M. C. Sousa and published by World Scientific. This book was released on 2002 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Decision making and control are two fields with distinct methods for solving problems, and yet they are closely related. This book bridges the gap between decision making and control in the field of fuzzy decisions and fuzzy control, and discusses various ways in which fuzzy decision making methods can be applied to systems modeling and control.Fuzzy decision making is a powerful paradigm for dealing with human expert knowledge when one is designing fuzzy model-based controllers. The combination of fuzzy decision making and fuzzy control in this book can lead to novel control schemes that improve the existing controllers in various ways. The following applications of fuzzy decision making methods for designing control systems are considered: OCo Fuzzy decision making for enhancing fuzzy modeling. The values of important parameters in fuzzy modeling algorithms are selected by using fuzzy decision making.OCo Fuzzy decision making for designing signal-based fuzzy controllers. The controller mappings and the defuzzification steps can be obtained by decision making methods.OCo Fuzzy design and performance specifications in model-based control. Fuzzy constraints and fuzzy goals are used.OCo Design of model-based controllers combined with fuzzy decision modules. Human operator experience is incorporated for the performance specification in model-based control.The advantages of bringing together fuzzy control and fuzzy decision making are shown with multiple examples from real and simulated control systems."

Download or read book Polynomial Fuzzy Model Based Control Systems written by Hak-Keung Lam and published by Springer. This book was released on 2016-07-18 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent research on the stability analysis of polynomial-fuzzy-model-based control systems where the concept of partially/imperfectly matched premises and membership-function dependent analysis are considered. The membership-function-dependent analysis offers a new research direction for fuzzy-model-based control systems by taking into account the characteristic and information of the membership functions in the stability analysis. The book presents on a research level the most recent and advanced research results, promotes the research of polynomial-fuzzy-model-based control systems, and provides theoretical support and point a research direction to postgraduate students and fellow researchers. Each chapter provides numerical examples to verify the analysis results, demonstrate the effectiveness of the proposed polynomial fuzzy control schemes, and explain the design procedure. The book is comprehensively written enclosing detailed derivation steps and mathematical derivations also for readers without extensive knowledge on the topics including students with control background who are interested in polynomial fuzzy model-based control systems.

Download or read book Methods and Applications of Intelligent Control written by S.G. Tzafestas and published by Springer. This book was released on 1997 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surveys the latest research in the field of intelligent control, covering issues such as human-machine systems, linguistic communication systems, and automatic verification of intelligent control software. Part I provides general overviews of intelligent control, fuzzy and neural control, and industrial applications. Emphasis in Part II is on neural, fuzzy, and neurofuzzy control concepts and techniques, with chapters on areas such as intelligent control and supervision based on fuzzy Petri nets, off-line verification of an intelligent control, and linguistic communication channels. Part III deals with the application of intelligent control to robotic manipulators, automatic power generation control, manufacturing systems, and welding processes. For researchers, practitioners, and students in related postgraduate programs. Annotation copyrighted by Book News, Inc., Portland, OR