Download or read book Intelligent Control written by Zi-Xing Cai and published by World Scientific. This book was released on 1997 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introducton; Methology of knowledge representation; General inference principles; Hierarchical control systems; Expert control systems; Fuzzy control systems; Neurocontrol systems; Learning control systems; Intelligente control systems in application; Prospectives of intelligente control; References; Bibliography; Subject index.

Download or read book Intelligent Control of Robotic Systems written by D. Katic and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: As robotic systems make their way into standard practice, they have opened the door to a wide spectrum of complex applications. Such applications usually demand that the robots be highly intelligent. Future robots are likely to have greater sensory capabilities, more intelligence, higher levels of manual dexter ity, and adequate mobility, compared to humans. In order to ensure high-quality control and performance in robotics, new intelligent control techniques must be developed, which are capable of coping with task complexity, multi-objective decision making, large volumes of perception data and substantial amounts of heuristic information. Hence, the pursuit of intelligent autonomous robotic systems has been a topic of much fascinating research in recent years. On the other hand, as emerging technologies, Soft Computing paradigms consisting of complementary elements of Fuzzy Logic, Neural Computing and Evolutionary Computation are viewed as the most promising methods towards intelligent robotic systems. Due to their strong learning and cognitive ability and good tolerance of uncertainty and imprecision, Soft Computing techniques have found wide application in the area of intelligent control of robotic systems.

Download or read book Methods and Applications of Intelligent Control written by S.G. Tzafestas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is concerned with Intelligent Control methods and applications. The field of intelligent control has been expanded very much during the recent years and a solid body of theoretical and practical results are now available. These results have been obtained through the synergetic fusion of concepts and techniques from a variety of fields such as automatic control, systems science, computer science, neurophysiology and operational research. Intelligent control systems have to perform anthropomorphic tasks fully autonomously or interactively with the human under known or unknown and uncertain environmental conditions. Therefore the basic components of any intelligent control system include cognition, perception, learning, sensing, planning, numeric and symbolic processing, fault detection/repair, reaction, and control action. These components must be linked in a systematic, synergetic and efficient way. Predecessors of intelligent control are adaptive control, self-organizing control, and learning control which are well documented in the literature. Typical application examples of intelligent controls are intelligent robotic systems, intelligent manufacturing systems, intelligent medical systems, and intelligent space teleoperators. Intelligent controllers must employ both quantitative and qualitative information and must be able to cope with severe temporal and spatial variations, in addition to the fundamental task of achieving the desired transient and steady-state performance. Of course the level of intelligence required in each particular application is a matter of discussion between the designers and users. The current literature on intelligent control is increasing, but the information is still available in a sparse and disorganized way.

Download or read book Handbook of Research on Advanced Intelligent Control Engineering and Automation written by Azar, Ahmad Taher and published by IGI Global. This book was released on 2014-11-30 with total page 826 pages. Available in PDF, EPUB and Kindle. Book excerpt: In industrial engineering and manufacturing, control of individual processes and systems is crucial to developing a quality final product. Rapid developments in technology are pioneering new techniques of research in control and automation with multi-disciplinary applications in electrical, electronic, chemical, mechanical, aerospace, and instrumentation engineering. The Handbook of Research on Advanced Intelligent Control Engineering and Automation presents the latest research into intelligent control technologies with the goal of advancing knowledge and applications in various domains. This text will serve as a reference book for scientists, engineers, and researchers, as it features many applications of new computational and mathematical tools for solving complicated problems of mathematical modeling, simulation, and control.

Download or read book Recent Advances in Intelligent Control Systems written by Wen Yu and published by Springer Science & Business Media. This book was released on 2009-05-27 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Recent Advances in Intelligent Control Systems" gathers contributions from workers around the world and presents them in four categories according to the style of control employed: fuzzy control; neural control; fuzzy neural control; and intelligent control. The contributions illustrate the interdisciplinary antecedents of intelligent control and contrast its results with those of more traditional control methods. A variety of design examples, drawn primarily from robotics and mechatronics but also representing process and production engineering, large civil structures, network flows, and others, provide instances of the application of computational intelligence for control. Presenting state-of-the-art research, this collection will be of benefit to researchers in automatic control, automation, computer science (especially artificial intelligence) and mechatronics while graduate students and practicing control engineers working with intelligent systems will find it a good source of study material.

Download or read book Advances in Intelligent Robotics and Collaborative Automation written by Yuriy P. Kondratenko and published by River Publishers. This book was released on 2015-03-31 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of a series of advanced research lines in robotics as well as of design and development methodologies for intelligent robots and their intelligent components. It represents a selection of extended versions of the best papers presented at the Seventh IEEE International Workshop on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications IDAACS 2013 that were related to these topics. Its contents integrate state of the art computational intelligence based techniques for automatic robot control to novel distributed sensing and data integration methodologies that can be applied to intelligent robotics and automation systems. The objective of the text was to provide an overview of some of the problems in the field of robotic systems and intelligent automation and the approaches and techniques that relevant research groups within this area are employing to try to solve them. The contributions of the different authors have been grouped into four main sections: RobotsControl and IntelligenceSensingCollaborative automation The chapters have been structured to provide an easy to follow introduction to the topics that are addressed, including the most relevant references, so that anyone interested in this field can get started in the area.

Download or read book Applications of Intelligent Control to Engineering Systems written by Kimon P. Valavanis and published by Springer Science & Business Media. This book was released on 2009-06-12 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reflects the work of top scientists in the field of intelligent control and its applications, prognostics, diagnostics, condition based maintenance and unmanned systems. It includes results, and presents how theory is applied to solve real problems.

Download or read book Intelligent Control Systems written by Gábor Szederkényi and published by Springer Science & Business Media. This book was released on 2006-04-18 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intelligent control is a rapidly developing, complex and challenging field with great practical importance and potential. Because of the rapidly developing and interdisciplinary nature of the subject, there are only a few edited volumes consisting of research papers on intelligent control systems but little is known and published about the fundamentals and the general know-how in designing, implementing and operating intelligent control systems. Intelligent control system emerged from artificial intelligence and computer controlled systems as an interdisciplinary field. Therefore the book summarizes the fundamentals of knowledge representation, reasoning, expert systems and real-time control systems and then discusses the design, implementation verification and operation of real-time expert systems using G2 as an example. Special tools and techniques applied in intelligent control are also described including qualitative modelling, Petri nets and fuzzy controllers. The material is illlustrated with simple examples taken from the field of intelligent process control.

Download or read book Advances in Intelligent Autonomous Systems written by S.G. Tzafestas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection of twenty-three timely contributions covers a well-selected repertory of topics within the autonomous systems field. The book discusses a range of design, construction, control, and operation problems along with a multiplicity of well-established and novel solutions.

Download or read book Robotics written by Matjaž Mihelj and published by Springer. This book was released on 2018-07-25 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces readers to robotics, industrial robot mechanisms, and types of robots, e.g. parallel robots, mobile robots and humanoid robots. The book is based on over 20 years of teaching robotics and has been extensively class tested and praised for its simplicity. It addresses the following subjects: a general introduction to robotics; basic characteristics of industrial robot mechanisms; position and movement of an object, which are described by homogenous transformation matrices; a geometric model of robot mechanisms expanded with robot wrist orientation description in this new edition; a brief introduction to the kinematics and dynamics of robots; robot sensors and planning of robot trajectories; fundamentals of robot vision; basic control schemes resulting in either desired end-effector trajectory or force; robot workcells with feeding devices and robot grippers. This second edition has been expanded to include the following new topics: parallel robots; collaborative robots; teaching of robots; mobile robots; and humanoid robots. The book is optimally suited for courses in robotics or industrial robotics and requires a minimal grasp of physics and mathematics. The 1st edition of this book won the Outstanding Academic Title distinction from the library magazine CHOICE in 2011.

Download or read book Intelligent Automation and Systems Engineering written by Sio-Iong Ao and published by Springer Science & Business Media. This book was released on 2011-08-23 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intelligent systems are required to facilitate the use of information provided by the internet and other computer based technologies. This book describes the state-of-the-art in Intelligent Automation and Systems Engineering. Topics covered include Intelligent decision making, Automation, Robotics, Expert systems, Fuzzy systems, Knowledge-based systems, Knowledge extraction, Large database management, Data analysis tools, Computational biology, Optimization algorithms, Experimental designs, Complex system identification, Computational modeling, Systems simulation, Decision modeling, and industrial applications.

Download or read book Intelligent Systems in Cybernetics and Automation Control Theory written by Radek Silhavy and published by Springer. This book was released on 2018-08-28 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents real-world problems and pioneering research that reflect novel approaches to cybernetics, algorithms and software engineering in the context of intelligent systems. It gathers the peer-reviewed proceedings of the 2nd Computational Methods in Systems and Software 2018 (CoMeSySo 2018), a conference that broke down traditional barriers by being held online. The goal of the event was to provide an international forum for discussing the latest high-quality research results.

Download or read book Introduction to Modern Sleep Technology written by Rayleigh Ping-Ying Chiang and published by Springer Science & Business Media. This book was released on 2012-12-14 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sleep medicine has been developing for more than 40 years. The current concepts in sleep technology are mainly centered on polysomnography (PSG) and issues related to sleep technicians. However, the editors believe that the true value of technology is revealed only when benefits to humanity are manifest. To this end, they endeavor to create a new era in sleep technology, one that will improve the quality of people's sleep and daily lives. This edited book, Introduction to Modern Sleep Technology, provides a comprehensive reference volume to the latest advancements in the area of Sleep Technology. It offers an excellent range of insights and opinions from leading researchers and experts in multiple disciplines spanning academia, clinical practice and industry. Up-to-date insights into the current research topics in this field are featured in addition to the latest technological advances with reference to appropriate working examples. The current book combines the five dimensions of knowledge, i.e., sleep medicine, clinical psychology engineering, industrial design and technology management to ensure the content is applicable to people's daily lives.

Download or read book Advanced Control Systems written by Yuriy P. Kondratenko and published by CRC Press. This book was released on 2022-09-01 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Control Systems: Theory and Applications provides an overview of advanced research lines in control systems as well as in design, development and implementation methodologies for perspective control systems and their components in different areas of industrial and special applications. It consists of extended versions of the selected papers presented at the XXV International Conference on Automatic Control “Automatics 2018” (September 18-19, 2018, Lviv, Ukraine) which is the main Ukrainian Control Conference organized by Ukrainian Association on Automatic Control (National member organization of IFAC) and Lviv National University “Lvivska Politechnica”. More than 100 papers were presented at the conference with topics including: mathematical problems of control, optimization and game theory; control and identification under uncertainty; automated control of technical, technological and biotechnical objects; controlling the aerospace craft, marine vessels and other moving objects; intelligent control and information processing; mechatronics and robotics; information measuring technologies in automation; automation and IT training of personnel; the Internet of things and the latest technologies. The book is divided into two main parts, the first concerning theory (7 chapters) and the second concerning applications (7 chapters) of advanced control systems. The first part “Advances in Theoretical Research on Automatic Control” consists of theoretical research results which deal with descriptor control impulsive delay systems, motion control in condition of conflict, inverse dynamic models, invariant relations in optimal control, robust adaptive control, bio-inspired algorithms, optimization of fuzzy control systems, and extremal routing problem with constraints and complicated cost functions. The second part “Advances in Control Systems Applications” is based on the chapters which consider different aspects of practical implementation of advanced control systems, in particular, special cases in determining the spacecraft position and attitude using computer vision system, the spacecraft orientation by information from a system of stellar sensors, control synthesis of rotational and spatial spacecraft motion at approaching stage of docking, intelligent algorithms for the automation of complex biotechnical objects, an automatic control system for the slow pyrolysis of organic substances with variable composition, simulation complex of hierarchical systems based on the foresight and cognitive modelling, and advanced identification of impulse processes in cognitive maps. The chapters have been structured to provide an easy-to-follow introduction to the topics that are addressed, including the most relevant references, so that anyone interested in this field can get started in the area. This book may be useful for researchers and students who are interesting in advanced control systems.

Download or read book Intelligent Systems written by Yung C. Shin and published by CRC Press. This book was released on 2017-12-19 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a thorough introduction to the field of soft computing techniques, Intelligent Systems: Modeling, Optimization, and Control covers every major technique in artificial intelligence in a clear and practical style. This book highlights current research and applications, addresses issues encountered in the development of applied systems, and describes a wide range of intelligent systems techniques, including neural networks, fuzzy logic, evolutionary strategy, and genetic algorithms. The book demonstrates concepts through simulation examples and practical experimental results. Case studies are also presented from each field to facilitate understanding.

Download or read book Intelligent Control written by Nazmul Siddique and published by Springer. This book was released on 2013-11-29 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intelligent Control considers non-traditional modelling and control approaches to nonlinear systems. Fuzzy logic, neural networks and evolutionary computing techniques are the main tools used. The book presents a modular switching fuzzy logic controller where a PD-type fuzzy controller is executed first followed by a PI-type fuzzy controller thus improving the performance of the controller compared with a PID-type fuzzy controller. The advantage of the switching-type fuzzy controller is that it uses one rule-base thus minimises the rule-base during execution. A single rule-base is developed by merging the membership functions for change of error of the PD-type controller and sum of error of the PI-type controller. Membership functions are then optimized using evolutionary algorithms. Since the two fuzzy controllers were executed in series, necessary further tuning of the differential and integral scaling factors of the controller is then performed. Neural-network-based tuning for the scaling parameters of the fuzzy controller is then described and finally an evolutionary algorithm is applied to the neurally-tuned-fuzzy controller in which the sigmoidal function shape of the neural network is determined. The important issue of stability is addressed and the text demonstrates empirically that the developed controller was stable within the operating range. The text concludes with ideas for future research to show the reader the potential for further study in this area. Intelligent Control will be of interest to researchers from engineering and computer science backgrounds working in the intelligent and adaptive control.

Download or read book Artificial Intelligence in Industrial Decision Making Control and Automation written by S.G. Tzafestas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 778 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is concerned with Artificial Intelligence (AI) concepts and techniques as applied to industrial decision making, control and automation problems. The field of AI has been expanded enormously during the last years due to that solid theoretical and application results have accumulated. During the first stage of AI development most workers in the field were content with illustrations showing ideas at work on simple problems. Later, as the field matured, emphasis was turned to demonstrations that showed the capability of AI techniques to handle problems of practical value. Now, we arrived at the stage where researchers and practitioners are actually building AI systems that face real-world and industrial problems. This volume provides a set of twenty four well-selected contributions that deal with the application of AI to such real-life and industrial problems. These contributions are grouped and presented in five parts as follows: Part 1: General Issues Part 2: Intelligent Systems Part 3: Neural Networks in Modelling, Control and Scheduling Part 4: System Diagnostics Part 5: Industrial Robotic, Manufacturing and Organizational Systems Part 1 involves four chapters providing background material and dealing with general issues such as the conceptual integration of qualitative and quantitative models, the treatment of timing problems at system integration, and the investigation of correct reasoning in interactive man-robot systems.